Link to Cingular firmware, please? - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I've been searching the forum forever with no luck!
I've already unlocked everything necessary and have my G3 Wizard flashed to 3.08 ISP/SPL I would like to flash the Cingular carrier rom, before I try flashing other custom ones on. However, I'm having a very hard time finding this.
Could someone please point me in the correct direction so i can download the latest stable version of the Cingular Carrier ROM on my phone please!

Just go to HTC's website and you'll find it there for download.

No dice, I registered and go to the Phone Software Updates but there is no list to choose my phone from. Dead end! Cant register it to them because its a t-mobile S/n
Is there no link to the latest cingular rom on an ftp server or a file upload somewhere?

TheNoid said:
No dice, I registered and go to the Phone Software Updates but there is no list to choose my phone from. Dead end! Cant register it to them because its a t-mobile S/n
Is there no link to the latest cingular rom on an ftp server or a file upload somewhere?
Click to expand...
Click to collapse
You don't have to register your phone to download the ROM. Which site did you go to, anyway??

I went to the HTC website (www.htc.com) like Xeno1 said, but it was not there.
Thanks for the link

Here you go, you have to go to the HTCAmerica site for it. Here's the link for it - http://www.htcamerica.net/support/8125/software-downloads.html.

Related

missing rom's

I downgraded my phone to the Cingular 1.xx rom and unlocked it. I want to upgrade to the tmobile 2.26 rom like the tutorial suggests but the FTP site seems to be down. Afterwards I am wanting to install molski's (new) 30mb rom, which also seems to be unavailable for d/l.
Could someone please either upload or link me to somewhere to download both the Tmobile 2.26 rom and Molski's newest rom. If these are all I need; I noticed on Molski's site that it says you should install his extended rom first...so if i need this also then that would be greatly appreciated. I know you can d/l the newest tmobile rom from their website, but I need a valid tmobile phone number in order to do so.
(The xda-developers ftp site is not working for me, I tried Firefox, IE, and SmartFTP)
Thanks,
Lee
I don't have any problems downloading anything... The latest Molski rom is in the uploads/wizard/molski.biz folder...
You can also get the molski's rom from his website, molski.biz
I found the 2.26 tmobile rom on another website and upgraded to it, however I still can't get Molski's roms (or any other files on the xda-dev ftp) to work. The ftp doesn't even connect for me :-\ I looked on molski's website but even the links on there link back to the xda-dev ftp.
EDIT: Wow...i'm a complete idiot. sorry everyone...the reason i couldn't connect was because of a program called peerguardian. it has apparently been opening itself when windows starts without my knowledge. i closed it and now the ftp works fine. sorry again!

im looking for : CUSTOM__RUU_Wizard_1050412_WWE_

hi all
i tried to download the file ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe from the unlockung topic then it failed
seems to be removed
somebody have please upload it on any server except rapidshare
like : http://www.quicksharing.com/
or http://www.up4world.com/
my device now unusefull , so please help me
thanx in advanced
http://download.yousendit.com/FF900F2908E9D05B
Thanks for the info.
Hi there everyone
Greetings from Paris
I encountered the same problem. The file was not there anylonger. Then I saw this post, and its reply. I downloaded the file on http://download.yousendit.com/FF900F2908E9D05B which worked fine.
I ran the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe file.
So far so good, and then the process crashed at 98%. Something about a file in outlook. I started the whole process again, and now it just stalls at 98%. No error message. NOthing. Anybody have any idea what I should do now...
I have an Orange SPV 3000. I can put the new rom back but I wanted to do a cid unlock, before doing so. It seems to be necessary to be able to try out different roms...
Thanks.
Paul Bourbon said:
I have an Orange SPV 3000. I can put the new rom back but I wanted to do a cid unlock, before doing so. It seems to be necessary to be able to try out different roms...
Thanks.
Click to expand...
Click to collapse
I never have to downgrade before I do the CID unlocked. I've tried with two MDA and never encountered any problem. You will only need to downgrade if you CANNOT CID unlocked; otherwise, don't bother to downgrade.
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Paul Bourbon said:
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Click to expand...
Click to collapse
When downgrading with this ROM...it will stall at 98% for a few minutes...be patient. To confirm that the ROM I posted was legit...I used it again myself and worked fine. Then to make sure it wasn't just me...I had 2 other people tell me they used it and worked fine for them as well.
Don't know what to tell you as this is the ROM that was hosted on the FTP site for a long time.
shell tool
If your having trouble flashing a rom the shell tool posted on the g4 threads lets you flash any rom you wish onto your phone i have a g4 cid locked and using the tool i can swap my roms every day if i wished to with no hassle
http://rapidshare.com/files/17787647/ShellTool_bugfixed.zip
Paul Bourbon said:
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Click to expand...
Click to collapse
Get yourself a signature. Is your Wizard G3 or G4.
I think that my wizard is a G3. I just added my signature.
Still looking for the mysterious file that apparently is no longer posted on this site.
thanks for any info.
i need a rapdishare or megauploads link to where i can download a 1.xx ROM for my G3 Qtek 9100 (Tmobile with imate 2.21 ROM).
I want to upgrade to wm6 and need to have a backup plan if it fails
10x in advance.
j3d1n4s7y said:
http://download.yousendit.com/FF900F2908E9D05B
Click to expand...
Click to collapse
thanx for uploading , but sorry this server blocked on our country
if any one can upload it again on the servers which i linked on the first post
thanx in advanced
looking for BUtton 1.05
this rom is not working for me. I stalls at about 98% of the process, and dies...
If you decide to do it, make sure you have a back up option.
Do a search on PirateBay for it. Its seeded...
i found the file
thanx for all
my device unlocked

updated roms but cant connect to cingular

okay I know I am missing something.
I successfull flashed my phone.
cingular 8125
to both underground and most beautiful edition..
using
http://forum.xda-developers.com/showthread.php?t=285435&highlight=8125
and managed to return it to its orginal state with cingular rom.
But I cant connect to cingular(use my phone)
somebody please lead me in the right direction.
thanks.
iamviolet said:
okay I know I am missing something.
I successfull flashed my phone.
cingular 8125
to both underground and most beautiful edition..
using
http://forum.xda-developers.com/showthread.php?t=285435&highlight=8125
and managed to return it to its orginal state with cingular rom.
somebody please lead me in the right direction.
thanks.
Click to expand...
Click to collapse
Go to Cingular's website and click on support select Cingular as the manufacturer, select 8125 as the phone and then follow the instructions for GPRS and MMS setup. Most custom roms don't have this information built into them and you have to re-enter or find the cab files to install. Though if you used an official Cingular ROM then you should already have these settings provided you let the carrier customization files run when it was first booted after the flash.
Search for the following two specifically:
P_Conn_CWS_APR12_Wizard.cab for GPRS
cingular_mms_964.cab for MMS
Both of these are included in posts and should be easy to find
Since you flashed WM6, you may also need ARCSoft too.
I keep this post bookmarked
http://forum.xda-developers.com/showpost.php?p=1120703&postcount=5
thanks got it all working
well almost everything
mms email messaging
i believe thats the right word .
for emailing....
what am i missing again?
thanks
Not to hijack but is there one for T-Mobile Settings? Just flashed mine with Underground...
sdpnoy said:
Not to hijack but is there one for T-Mobile Settings? Just flashed mine with Underground...
Click to expand...
Click to collapse
I am sure there is/are cab file(s) around. I do know that if you go to the T-mobile site and follow there instructions there is a bad IP address in one of the steps.
it is something that contains a .050 as one of the octets. If you enter it as it is on their site it won't work. Change it to .50 and everything works fine.
checked the website
but in order to get to the download center i have to have a valid tmobile number.
iamviolet said:
checked the website
but in order to get to the download center i have to have a valid tmobile number.
Click to expand...
Click to collapse
Curious, why do you need T-Mobile GPRS settings if you don't have a T-Mobile account?
someone gave me wrong advice..
still trying to get my 8125
underground edition.
to use MMS..
any help would be appreciated.
If you are on Cingular, try the cabs mentioned above. Or just go to the Cingular support site and they show the settings for MMS.

Last o2 WM5 ROM Download

Cant get support for the XDA Mini S anymore from o2, does anyone have a link to somewhere else I can download it from, checked the FTP but theres nothing there..
http://rapidshare.com/files/53377946/Wizard__CID___Sim_Unlocker.rar
That includes everything for unlocking the wizard, which includes the button rom ,lokiwiz and the official o2 wm5 rom , password for rar file is scousemartin
Nice one chap, gonna flash back to official and then try a different rom..

Recovering a harrier device

Ok, so I tried installing the WM6 rom on my device without knowing it was in fact a Harrier and not a Blue Angel. I now realize I was very stupid in doing this. Now when it boots I get the stripes on the screen and "No GSM, D 5.60.00 WWE" written in the bottom right corner of the screen.
Does any one have an original Harrier rom they could upload so I can flash it back to the original WM2003?
If no one has that, is there a way to copy the rom from another, identical device?
xplode has a great firmware archive, where you can find about any original shipped rom, for the harrier, you find it here: http://firmware.atspace.com/Harrier.html
Thanks Chef_Tony. Thats got it working again perfectly.
i have the same problem it now says no gsm ....
what software do i need to make it work again ?
thx
andy
gripperwod said:
i have the same problem it now says no gsm ....
what software do i need to make it work again ?
Click to expand...
Click to collapse
Hit the link that Chef Andy listed, find your carrier in that list and download the latest one available
what i meant is which 1 do i download from the link chef andy left do i just use the upgrade tool or radio if so how do i find out which version i need ?
thanks
andy
gripperwod said:
what i meant is which 1 do i download from the link chef andy left do i just use the upgrade tool or radio if so how do i find out which version i need ?
Click to expand...
Click to collapse
Again, find your carrier (I'm assuming that the phone was running the official ROM that it shipped with for your carrier) in that list and download the latest one available. No one can tell you which one to download as no one else but you knows who your carrier is.
The radio version doesn't matter in this situation as the OS is coded to deal with a CDMA radio stack, and most, if not all, official ROM flashers will flash the radio stack with the OS. You are going to have to flash it back to whatever OS and build (usually WM2003 for the Harrier) is provided in the archive. If there are multiple versions of the ROM/radio available, generally the newer ones are the better ones.
You shouldn't need anything special for this as you will be flashing the official ROM for the phone. Download, run the executable and follow the on screen instructions.
ok ive downloaded all from these links and it tells me each flash ..
the rom image is not designed for your device . error code is wrong country code !!
i tried simunlock and now have no gsm showing in boot .
it was on uk orange network the phone is spv m2000
thx
well, your device is a blueangel, this thread is about the harrier. it deals with people trying to recover their CDMA devices after a bad flash, you have a GSM device, a completely different phone, and also, the source of your problem is not the same. thank god, the flash did not work, or your phone would be bricked for good.
you need to do a completely different procedure:
1. you go to xplode's BLUEANGEL firmware archive at http://firmware.atspace.com/Blueangel.html and download any rom in your language / from your country. then you put your device into bootloader mode and flash the device using maupgradeut_noid, found here: http://rapidshare.com/files/322928773/Chef_Tony_RUU.zip
2. then, when you have wm2003 back, please post back for further steps to go.
thank you i will do as you said and report back thx mate , ps are you realy a chef because i am lol i have been a chef around 26 years.
ok downloaded the orange uk but its file is corrupt so executable failed ...
looks like im not going to win ..
tried other orange uk files further down the list but still says country error code.
yes, the country id error is the reason, why you need to extract the 40mb exe file, put maupgrade in there, from the link i provided earlier, another thing to avoid the country id error, is to put the device into bootloader mode before starting the upgrade process, so, before you put the blueangel into the cradle, you press record+power+reset, until the display shows "Serial" and "V2.0x" where x is a number from 5 to 7, then you connect the device and start maupgradeut_noid.exe, which has to be in the same folder as the nk.nbf and all the other needed files. using the maupgrade instead of the BAupgrade and using the bootloader mode avoids nearly all the errors, like country id, device id and so on.
EDIT: btw. i am not a chef, i am a system administrator, the avatar and username are just my regular online name, named after the most ridiculous chef on american tv ^^
gripperwod said:
thank you i will do as you said and report back thx mate , ps are you realy a chef because i am lol i have been a chef around 26 years.
Click to expand...
Click to collapse
Tony is right, your phone would have been bricked.
For future reference, when you post, make sure to list your carrier and the exact model of phone. Anyone in these forums needs this info to attempt to offer the correct information to help.
In my posts, as Tony mentioned, this thread was dealing with Harriers, the CDMA version of the Blue Angel. When you jumped in, I thought that you were talking about a Harrier as well.
Keep in mind that each phone has it's specific ROM designed for that single model of phone alone, they are not interchangeable.
hi
after long time thought i might have another go ...
all the links you have supplied dont work eg: file is corrupt is the message im getting when trying to install software to pc.
i need the factory cd rom for the : orange spv m2000
i have no gsm on the phone since i upgraded the phone to wm6.5
ce os 5.2.21169 (build 21169.5.0.0)
please help
thx

Categories

Resources