okay I know I am missing something.
I successfull flashed my phone.
cingular 8125
to both underground and most beautiful edition..
using
http://forum.xda-developers.com/showthread.php?t=285435&highlight=8125
and managed to return it to its orginal state with cingular rom.
But I cant connect to cingular(use my phone)
somebody please lead me in the right direction.
thanks.
iamviolet said:
okay I know I am missing something.
I successfull flashed my phone.
cingular 8125
to both underground and most beautiful edition..
using
http://forum.xda-developers.com/showthread.php?t=285435&highlight=8125
and managed to return it to its orginal state with cingular rom.
somebody please lead me in the right direction.
thanks.
Click to expand...
Click to collapse
Go to Cingular's website and click on support select Cingular as the manufacturer, select 8125 as the phone and then follow the instructions for GPRS and MMS setup. Most custom roms don't have this information built into them and you have to re-enter or find the cab files to install. Though if you used an official Cingular ROM then you should already have these settings provided you let the carrier customization files run when it was first booted after the flash.
Search for the following two specifically:
P_Conn_CWS_APR12_Wizard.cab for GPRS
cingular_mms_964.cab for MMS
Both of these are included in posts and should be easy to find
Since you flashed WM6, you may also need ARCSoft too.
I keep this post bookmarked
http://forum.xda-developers.com/showpost.php?p=1120703&postcount=5
thanks got it all working
well almost everything
mms email messaging
i believe thats the right word .
for emailing....
what am i missing again?
thanks
Not to hijack but is there one for T-Mobile Settings? Just flashed mine with Underground...
sdpnoy said:
Not to hijack but is there one for T-Mobile Settings? Just flashed mine with Underground...
Click to expand...
Click to collapse
I am sure there is/are cab file(s) around. I do know that if you go to the T-mobile site and follow there instructions there is a bad IP address in one of the steps.
it is something that contains a .050 as one of the octets. If you enter it as it is on their site it won't work. Change it to .50 and everything works fine.
checked the website
but in order to get to the download center i have to have a valid tmobile number.
iamviolet said:
checked the website
but in order to get to the download center i have to have a valid tmobile number.
Click to expand...
Click to collapse
Curious, why do you need T-Mobile GPRS settings if you don't have a T-Mobile account?
someone gave me wrong advice..
still trying to get my 8125
underground edition.
to use MMS..
any help would be appreciated.
If you are on Cingular, try the cabs mentioned above. Or just go to the Cingular support site and they show the settings for MMS.
Related
I've just uploaded to a recently release WWE 135 upgrade from the TelecomMobile Harrier.
It's at:
ftp://xda:[email protected]/BlueAngel/Harrier H20A2/
I'm about to install it, but feel free to scrounge anything useful from it.
Update:
Old ROM:
CE 1.29.00
Ext ROM 1.29.118
Radio HA01_136
New ROM:
CE 1.35.00
Ext ROM 1.35.117
Radio HA01_141
Later'ish
Craig
does the old passwords works with this rom or it requires new. pls kindly specify.
thanks
jeet
Why don't you try it?
For CraigHumphrey this is a same operator upgrade thus he does not need tofix it but run the ship.exe
Craig
I have cooked your NZTelecom Harrier 1.29.118 WWE Ext Rom, you might want to look at it.
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_X_129118
I have renamed the file to stay with the current format and posted it back on the ftp site.
I have added it the Available Ext Roms page on wiki
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Available_Ext_Roms
I have added the Harrier web update page to Available Upgrades in Wiki
I Have added the above update to Available Upgrades on wiki.
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
Would you please upload your 1.35 Exteneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
Would you please post the Windows version and build Number reported by your device.
I know that you have no WIFI on the harrier, however it would intrest me to see if your 1.35 build would support it. Can you please check if you can find the following under \Windows:
WirelessMgr.exe
WirelessMgr.exe.0409.mui
WLanMgr.exe
Stk.exe
And post your answer.
Thanks
the old passwords dont work with the new pls any new passwords for this rom. it doesnt accepts the old passwords.
thanks
jeet
Hmm.. I had already replied to this, but it seems to have gotten lost, so here it is again
MDAIIIUser said:
Craig
Would you please upload your 1.35 Exteneded rom to:
ftp://xda:[email protected]/BlueAngel/Extended_Roms/New_ROMS
Click to expand...
Click to collapse
Done
MDAIIIUser said:
Would you please post the Windows version and build Number reported by your device.
Click to expand...
Click to collapse
Windows Mobile 2003 Second Edition
Version 4.21.1088 (Build 14132)
MDAIIIUser said:
I know that you have no WIFI on the harrier, however it would intrest me to see if your 1.35 build would support it. Can you please check if you can find the following under \Windows:
WirelessMgr.exe
WirelessMgr.exe.0409.mui
WLanMgr.exe
Stk.exe
Click to expand...
Click to collapse
None of those files exist.
Reminds me, I need to get a new WiFi card (the SanDisk 256MB + WiFi was unsupported).
Later'ish
Craig
Cooked the Ext Rom
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Cooked131
Ran the
NZTelecom Harrier 1.35.117 WWE ERK_1.3x_002
Through the kitchen
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_X_135117
Interesting... Craig, could you please post the BT stack version/build after applying this update?
BT Icon -> Bluetooth settings -> About tab
mjb said:
Interesting... Craig, could you please post the BT stack version/build after applying this update?
BT Icon -> Bluetooth settings -> About tab
Click to expand...
Click to collapse
Bluetooth for WIndows CE
BT-PPC/PE Version 1.0.0 Build 3500.
Under the Advanced button, all components have the same version as above (1.0.0.3500).
Later'ish
Craig
The file is corrupt
I've downloaded it twice and still only comes to 22.9MBytes. WINRAR hates it. The executable won't unpack either.
I would like to get the HA01_141 radio to try on my XV6600. If anyone has a link to a good copy of this file... let me know.
Ehud
Re: The file is corrupt
gavron said:
I've downloaded it twice and still only comes to 22.9MBytes. WINRAR hates it. The executable won't unpack either.
I would like to get the HA01_141 radio to try on my XV6600. If anyone has a link to a good copy of this file... let me know.
Ehud
Click to expand...
Click to collapse
Which file is corrupt?
I downloaded it from here:
http://www.telecom.co.nz/content/0,3900,202143-203139,00.html
Then I had to do a couple of modifications to get it to flash using the magician patched flasher.
However, although it worked correctly with the Sprint EV-DO PRL for voice calls, the data connection was hosed.
It has some sort of special Kiwi customization in it . The #777 connection ends up with a password, even if I try to set it up from scratch (without running anything from extrom!). I remove the password and save the changes and then it comes back... it's obviously embedded in the HA01_141 radio ROM, and thus prevents my Sprint 6600 from connecting to #777.
The good news is that the Telstra and Verizon HA01_140 Radio_ roms do work for voice and data (although roaming isn't working).
Dan
Re: The file is corrupt
CraigHumphrey said:
gavron said:
I've downloaded it twice and still only comes to 22.9MBytes. WINRAR hates it. The executable won't unpack either.
I would like to get the HA01_141 radio to try on my XV6600. If anyone has a link to a good copy of this file... let me know.
Ehud
Click to expand...
Click to collapse
Which file is corrupt?
Click to expand...
Click to collapse
The one mentioned at the top of this thread on the xda-developers ftp site. The one Dan mentioned works just fine. Someone with write capabilities should replace the one on the xda-developers ftp site...
Ehud
done!
Downloaded of link
Uploaded to ftp
corrected link in wiki
why is the rom directory empty?
Guys, I know this isn't room for asking.... but, please help me with my Sprint 6600 Harrier.
I just upgrade the new ROM (WM6.1) to my PDA. But this is my stupidity, i installed the ROM that use for GSM device, while my device is CDMA.
How to rolled back to WM2003 or higher for may PDA. Pleade guys help me.... I've desperate for this... (
Thanks for your kindnes...
You cannot upgrade the Sprint or Verizon 6600 model to WM5 or WM6 or higher. No one has yet to be able to do it. I've tried many times. You need to flash your device back with a Sprint PPC6600 ROM. The GSM ROMs are not compatible with your GSM device.
You should be able to depress the reset button with your stylus while pushing in the power and top button on left side all at the same time (a three handed job). This will put you in Serial mode (you'll see "Serial") faintly on a blanked out screen. Then you'll hook up your phone via usb cable to your computer. Then the "Serial" will change to "USB". Then you'll click on the ROM and flash it back to your Sprint PPC ROM.
There are some hacks you can do with your Sprint PPC 6600 which greatly improve its performance. There's some great Stereo Bluetooth drivers and lots of other stuff. You can unlock the extended ROM and customize the device quite nicely. You can even modify your device to work on Sprints EVDO Rev 0 network. You'll have to search this website and the Wiki to figure it all out.
@ Rambo6: Thanks for your respon.
But, I have no WM2003 ROM to flash it back. Or i can do hack my device with stereo bluetooth and unlock the extrom for flash it back?
You need to flash back to an original ROM. You need to find a ROM for an HTC Harrier (Audiovox/Verizon xv6600 or Sprint PPC6600). UT Starcom used to have these ROMs on their website. Last time I looked they were not there. I have one of these on a harddrive somewhere.
Do some web searches and you can probably find it somewhere.
Hello guys!
I got my MDA Vario last week, and I am very much impressed with it!
I got the MDA Vario brand new without a contract and my intention is to use it with one of those O2 Genie PAYG SIM cards. So.... after much reading this excellent forum I figured out that I would need to unlock the SIMlock on the Vario. Got hold of the Lokiwiz utility, followed the advice on these forums, and tested it with the Orange SIM in my regular phone, and hey presto.... MY PY PHONE IS UNLOCKED!
Next step - to remove all T-Mobile customisations. Again, I had a simple bit of advice from one of you good folk - hard reset, then soft reset when the phone starts to install customisations and now all the pink girlie stuff has gone! Only reminant of T-Mobile left on the phone is the logo on the phone dial keypad.
My thoughts are now with upgrading the ROM. T-Mobile have been very slow with updating their ROM package -a new one is apparently due very soon. Now.... in preparation of installing a new ROM, Ive CID unlocked my phone. I would really like to know which ROM I should upgrade to - there are so many out there! As the phone has been CID & Sim Unlocked, does the phone remained unlocked irrespective of what ROM I install? Can I install a T-Mobile ROM after changing it to another?
As I intend to mostly use an O2 PAYG SIM in it, would it be better to use a new 02 update? If so, which one? Or do I go for another ROM? All very confusing! Finally, Ive heard that I cannot browse the net via GPRS on an 02 PAYG SIM. Is that true? Do I need to flash an ExtROM too?
I know Im asking a lot here and am being a bit of a pain in the backside, but I would really appreciate any and as much advice as possible as I realy dont want to end up with a dead phone! Many thanks in advance!
Hi, yes you could wait for the new rom and i am a believer in sticking with your manufacturer roms because many of the posts here seem to people experimenting with different roms and it all going wrong - lol.
But if you do upgrade proberly the commonest choice is the aku2 qtek rom that i use
download here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
and the o2 aku2rom not a bad idea too, but without the o2 extras.
Yes you could then upgrade to the t-mobile rom then but often you need to unlock again with lockiwiz 0.3a.
PAYG o2 will browse internet but msn etc.. does not work.
btw yes you are a pain in the arse but then most people here are!! :lol:
Cheers Mark! Nice to have some basic advice - very reassuring for a thicko newbie like me!
Well... I couldnt wait for the new T-Mobile ROM and went ahead with the upgrade with the Qtek upgrade you suggested.
Was a little tricky at first because the upgrade wouldnt happen (port failing to open) but I had a few programs running in the background on my desktop PC and shut them all down so that I had a `Clean` PC. The upgrade process was then as smooth as a babys bottom.
MDA Vario is running really well - well worth the upgrade IMO. Everything seems quicker and generally better. Only problem I have is with wifi - it seems to take ages to make a connection with my PC (ad-hoc peer to peer) whereas on the original T-Mob ROM it was very quick. Any ideas here?
I read that you say I would need Lokiwiz 0.3a to install the AKU2 T-Mob ROM when it is eventually released. I was under the impression that once the PDA was unlocked (lokiwiz 0.2b) I wouldnt need to unlock it again. Is it different with the very latest T-Mob ROM? Can I not revert (downgrade) to the original T-Mob and then upgrade to the new T-Mob ROM? Ive not heard of lokiwiz 0.3a being out yet - would it be as simple as unlocking with lokiwiz 0.2b?
Finally, how on earth do I get the latest 02 ROM? I need to enter my 02 mobile number and IMEI to download it. Do I need lokiwiz 0.3a to install that or any other current ROM?
Cheers for your friendly advice.
Al.
Hi, no problem - glad to help.
Lokiwiz 0.3a is out see here http://forum.xda-developers.com/viewtopic.php?t=50768
For some reason when upgrading (in think it renews cid/spl) to aku2 rom seems to lock again - i had to unlock my qtek with above tool.
Yes you can go back to original rom - but if does not work use farias method of unlocking and downgrading rom (post is in this forum)
Most of the roms are in the wiki http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
including the o2 roms, but i would refrain from too much chopping and changing because you can destory the bootloader and then has to go back to the manufacturer.
Many reported problems with the wifi setting up - i would read some of the threads in the wizard forum if i was you. First thing to try is tweak wifi on device to wlan g and it may work better.
see registry tweaks here http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
btw good to hang out in the wizard forum too - you will learn alot of tips from there.
Want to also say thanks from another newebie with T-Mobile MDA. Have unlocked phone and CID and flashed with 2.17 QTEK ROM and all is good.
Thanks !!!
if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..
Jesus sbouri that logo was killing me, brilliant tip, nice one mate!!!
hi
i just got my mda vario and manage to unlocked the phone with lokiwiz03. i know my phone is now sim unlocked, but how do i check if it is cid unlock as well?
i am eager to flash the rom with the qtek version but i have no idea how to do it.
i know i must have my phone cid unlock in order to install a different rom, so do i just download the latest qtek rom, connect my device to usb and activesync it, and then just run the RUU?
i am really noob here.
cheers.
Hi mate if i was you i would use MR CLEANS ROM i flashed with that and its excellent, tottaly clean with no tmobile crap and i didnt do anything with the cid so dont worry.
ftp://xda:[email protected]/Uploads/Wizard/ROMS/MrClean_RUU_WIZARD_224_AKU23_WWE.zip
Just download this and run follow instructions, real easy. Good luck mate.
thanks for the advice...i took a bold move and flash it with a qtek rom. works like a charm. before that i did cid unlock using lokiwiz02a, not lokiwiz03.
i will take a look at mr.clean rom at a later stage.
i notice that my imei number is different from the one in my box. does flashing the rom change it?
now my next task would be update to a better radio rom and check out the extension rom.
cheers.
SBouri said:
if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..
Click to expand...
Click to collapse
Great tip, worked like a charm and left no marks.
Thanks.
Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks
Scottland said:
Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks
Click to expand...
Click to collapse
The mr clean rom is a more advanced rom and has no extras. The qtek official rom is probably a safer install because its an official rom and many good reports of success and users pleased with the outcome.
Yes when you have flashed just input all those settings again.
Plus you can backup your voice tag database between hard resets by copying the file CommandModel1.bin found under the windows folder to your pc or to the memory card. After rom upgrade copy it back to your windows folder and all your voice tags are back!
Create backup of windows\start menu - most programs that are on the storage card dont need a reinstall.
Create copy of pim.vol in the root directory of the device - contains contact and appt information. After flash change the new pim.vol to pim.vo and copy and paste old pim.vol (use total commander or gsfinder file explorers for this) and soft reset and you will have info back.
Create backup of windows\favorites - for all your internet favorites.
That will make restore a bit quicker than otherwise.
Cheers for the info. I was actually thinking of trying the Mr. Clean one first, is there anything missing from this one, or is it just less stable?
Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.
meschle said:
Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.
Click to expand...
Click to collapse
True, I didn't think about that. Thanks again.
Ive been using Mr clean rom for 1 week now and its excellent from my experience. Its tottaly clean and runs so fast!
By clean i mean it has no customizations as you will find on official roms. It flashed just like any other rom too. Easy as pie. Just my info as people would like to know.
I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?
Scottland said:
I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?
Click to expand...
Click to collapse
I cant find what you say under settings - what does it do?
Never mind ignore me, that'll teach me not to read T-Mobile's site correctly
thEsE files are only for the HTC WIZARD
this post is in response to the request from this thread ;http://forum.xda-developers.com/viewtopic.php?t=52521&postdays=0&postorder=asc&start=0
Upgrading only the radio or the splash and extended-rom will not wipe any setting from you device. It only updates the respective part that you are flashing.
This is a proper extended-rom[for sumiter rom wizard custom AKU 2.3 ROM but it should work with any 2xxx rom].nbf is not a folder containing the files
To install unzip the folder and run the ROMUpdateUtility_Wizard_NoID.exe
You will not lose any setting that you have in your rom. It simply updates the extended-rom.
when’d you decide to hard reset you device again the extended rom will load automatically as in the official rom , there it is .no Cingular stuff .
download my extended rom from here EXTENDED-ROM-FOR NON-CINGULAR-USERS
how to install? simply run the ROMUpdateUtility_Wizard_NoID.exe that is inside every splash screen and extended rom folder[/b]
more splashes coming soon.please post your requests and if you like my work please say thank you a least .
shouldnt one of the versions in the boot loader screen change when doing this mine stayed the exact same
shouldnt one of the versions in the boot loader screen change when doing this mine stayed the exact same
gizm0luvsu said:
shouldnt one of the versions in the boot loader screen change when doing this mine stayed the exact same
Click to expand...
Click to collapse
no it should stay the same.
Thanks !
Hi Faria,
Thanks for this handy utility. Are you still working on a kind of manual about cooking your own rom?
Nico
faria, thank you for your Vodafone splash screen its awesome!
I wanted to ask you is it possible to have HTC logo?
To gooshy
First you should cid unlock before doing anything using the lokiwiz tool, then flash the new rom .as for how does my extended-rom fixes the problem of the guy with the £40 bill is simple;Is phone was dialling out to get is email and because he installed the default extended-rom he has all the Cingular gprs/dialup settings to access email/web ,so is device was using the American settings to dial out from the uk to get is mail. since I have remove such settings from my extended-rom , there is no danger of any bills .
Click to expand...
Click to collapse
Thankyou faria for your response. This has put my mind at ease.
I have spotted a slight problem since updating. When I send a text message, the receiver gets the message twice. Im not sure if this is a ROM issue, a setting issue or a T-Mobile issue. Just wondered if anyone has had this problem before?
Thanks for all your work.
Cheers.
raven2000 said:
faria, thank you for your Vodafone splash screen its awesome!
I wanted to ask you is it possible to have HTC logo?
Click to expand...
Click to collapse
HTC LOGO HAS BEEN UPLOADED TO THE FIRST POST
gooshy said:
To gooshy
First you should cid unlock before doing anything using the lokiwiz tool, then flash the new rom .as for how does my extended-rom fixes the problem of the guy with the £40 bill is simple;Is phone was dialling out to get is email and because he installed the default extended-rom he has all the Cingular gprs/dialup settings to access email/web ,so is device was using the American settings to dial out from the uk to get is mail. since I have remove such settings from my extended-rom , there is no danger of any bills .
Click to expand...
Click to collapse
Thankyou faria for your response. This has put my mind at ease.
I have spotted a slight problem since updating. When I send a text message, the receiver gets the message twice. Im not sure if this is a ROM issue, a setting issue or a T-Mobile issue. Just wondered if anyone has had this problem before?
Thanks for all your work.
Cheers.
Click to expand...
Click to collapse
your problem is very rare but it is know across roms im afraid i dont know the cause.
this is a network issue, happens to me all the time sometimes i get the msg 4 times in a row lol THANK GOD FOR UNLIMITED TXT
great work .. thanks
could u make it import any image into the tool?
like insert "MyOwnBestIspWhatsoeverSplashLOGO"?
update
update
I have successfully created a new test extended rom for any wizard with 2xxx rom versions regardless of the carrier.
the best thing is that this extended rom has carrier settings in it for UK/AUSTRALIA /SOUTH AFRICA/PORTUGAL/NEW ZEALAND/NORWAY/AND Nederland’s ,so wend the extended rom loads a dialog comes up and you chose the particular carrier setting that you want, after selecting it just install automatically.or you could just press cancel and no carriers setting will be isntalled but the remaining items will be.nice.
I have also manage to hack the program called [wm5torage] so now it can be installed from the extended rom ,I have also made the program 30% lighter and it works flawless
Also it has registry setting on it like; gps icon back, performance tweaks etc, etc...
At the moment imp putting a few more settings programs into it like a tiny program that actually closes the applications and it is only 4kb.
It is not ready to public release. But will be soon if anyone is interested. Are you?[/
samimayer said:
great work .. thanks
could u make it import any image into the tool?
like insert "MyOwnBestIspWhatsoeverSplashLOGO"?
Click to expand...
Click to collapse
are you talking of the htc-logo or splash screen?
both would mae me happy
the splash is the most annoying
i use the attached (changed 2 jpg for size) file
as the welcome96.png
can it work on prophet?
Orange?
/Cacti
Re: Orange?
le_cactus said:
/Cacti
Click to expand...
Click to collapse
thank you for uploading orange dump CACTI,i have converted and posted in the first post, also there is a DOPOD splash uploaded.
How are you making these? I can't figure out which application to use to try to reverse engineer this but you seem to have this down to a science. Any help is appreciated!
100Tbps said:
How are you making these? I can't figure out which application to use to try to reverse engineer this but you seem to have this down to a science. Any help is appreciated!
Click to expand...
Click to collapse
Look here:
http://forum.xda-developers.com/viewtopic.php?t=52564
Be careful, read everything. If you're not careful you can brick your phone easy.
kyphur said:
100Tbps said:
How are you making these? I can't figure out which application to use to try to reverse engineer this but you seem to have this down to a science. Any help is appreciated!
Click to expand...
Click to collapse
Look here:
http://forum.xda-developers.com/viewtopic.php?t=52564
Be careful, read everything. If you're not careful you can brick your phone easy.
Click to expand...
Click to collapse
kyphur is correct 1 wrong move and you have a dead device. the reason that it is difficult to do a tutorial on how to cook roms is because you need to mess with several tool/programs/encode/decode/convert flash,etc,etc.etc...there is not a simple straightforward way of doing it, my Wizard is only 2 months old and have learn to cook roms unlock simply by reading the xda,also a lot has been guess work and brain power because no one is prepared to help you kill you device .at the moment I m very busy but I plan to write a tutorial in how to cook your extended rom.
in another note there is 2 new splashes uploaded
or is this pretty much because i have a g4 this most roms dont work??
You can't flash a G4 with a G3 rom that includes a bootloader and vice versa. You're lucky you haven't ruined the phone by now. Spend a minute and look through all the posts already here about this subject.
i know that,, i havent tired
but even when i download the rom for a G4, they work.... but not fully... no extra programs where put on.... i was able to set up my GPRS settings manually so that worked.... but no MMS txt were workin...
i just finshed downloading molskis
new 30mb rom... i downloaded the G4 WWE verison... but do not kow if i need to CID-unlock my g4wizard.. i have lizowlki0.2b to unlock it.. but was told i didnt need 2
DankSmoker420 said:
new 30mb rom... i downloaded the G4 WWE verison... but do not kow if i need to CID-unlock my g4wizard.. i have lizowlki0.2b to unlock it.. but was told i didnt need 2
Click to expand...
Click to collapse
As far as i know you need to CID unlock first if you have a wizard as part of an operator contract.
My wizard is not tied to any operator and i installed and have been running this G4 WWE ROM for about a week with no problems at all.
I have set up the WAP settings manually for my operator but have not figured out yet how to get the MMS folder in messaging
good luck
AirwolfUK said:
As far as i know you need to CID unlock first if you have a wizard as part of an operator contract.
My wizard is not tied to any operator and i installed and have been running this G4 WWE ROM for about a week with no problems at all.
I have set up the WAP settings manually for my operator but have not figured out yet how to get the MMS folder in messaging
good luck
Click to expand...
Click to collapse
Yes i downloaded a rom.. and had the SAME problem... but also the extra progrms that came with the rom didnt work as well....along with the MMS folder... *shrugs* i cant even figure out how to unlock my g4... ive tired with lokiwiz0.2b but it dont work
It's impossible to CID unlock a G4 phone without "paying" for it...
For the MMS folder, take a look here: http://www.molski.biz/myroms.html
I've been searching the forum forever with no luck!
I've already unlocked everything necessary and have my G3 Wizard flashed to 3.08 ISP/SPL I would like to flash the Cingular carrier rom, before I try flashing other custom ones on. However, I'm having a very hard time finding this.
Could someone please point me in the correct direction so i can download the latest stable version of the Cingular Carrier ROM on my phone please!
Just go to HTC's website and you'll find it there for download.
No dice, I registered and go to the Phone Software Updates but there is no list to choose my phone from. Dead end! Cant register it to them because its a t-mobile S/n
Is there no link to the latest cingular rom on an ftp server or a file upload somewhere?
TheNoid said:
No dice, I registered and go to the Phone Software Updates but there is no list to choose my phone from. Dead end! Cant register it to them because its a t-mobile S/n
Is there no link to the latest cingular rom on an ftp server or a file upload somewhere?
Click to expand...
Click to collapse
You don't have to register your phone to download the ROM. Which site did you go to, anyway??
I went to the HTC website (www.htc.com) like Xeno1 said, but it was not there.
Thanks for the link
Here you go, you have to go to the HTCAmerica site for it. Here's the link for it - http://www.htcamerica.net/support/8125/software-downloads.html.