Database Develop

Help... Cant Connect To My PC Via Activesync

Plz Help Me.....
I Cant Connect My Mobile To Pc Via Activesync Whenever I Upgrade To Windows Mobile 5. I Had The Same Problem Even In Tuma v1.3...
I Have ActiveSync v4.1.0 (Build 4841)
And So I M Not Able To Copy All The Files Of Ext Rom.....
Plz Someone Help Me...

AS 4.2 went final the other day, try the latest version. AFAIK it contains a lot of bug fixes.
Also, some people have problems when plugged into a USB hub, try a direct connection or even another port.

Did you check and see if your mobile network setting (local PC) is set correctly?
Goto My network --> Properties
and you should see a netowrk connection for Windows Mobile Device.
Go to properties, and enable the Internet Protocol for the device.

[Q] help please please'

i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys

Sounds like you're running a 64bit Win7. That won't work! (unless mabee virtual)

basicbri said:
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Click to expand...
Click to collapse
Look in my English Thread (WM6.1,WM6.5,WM6.5.x) i have an "HowTo" for Win7 64x (Work for Himalaya too)

d-two said:
Look in my English Thread (WM6.1,WM6.5,WM6.5.x) i have an "HowTo" for Win7 64x (Work for Himalaya too)
Click to expand...
Click to collapse
Oh, yes. I remember reading it. OK, I'm getting old!

where factory apps come from - ms_.nbf -
basicbri said:
i have been trying for days to update my xda ll himalaya from 2003 to windows 6 plus, but with no luck.
i follow all the instructions on this forum' but no luck at all.
it keeps going back to programes that were set by factory bloody phone.
i must have downloaded nearly all the roms on this site and tried to install them with no luck' i was wondering can i install a new operating system over the old one a bit like a lap top you know like booting from a sd card and installing over the top of the old one.
please fellows i do need help on this one, my daughter keeps offering me this samsung pink small slide thing, because my phone wont update' save me from this pink gross small keyed thing.
many thanks guys
Click to expand...
Click to collapse
you will need the stuff from this post -
http://forum.xda-developers.com/showthread.php?t=648067
install - ER2003Edit_1_4_26.msi on pc
it will enable you to be able to open the ms_.nbf
the ms_.nbf needs to be put in the same folder as
HimaUpgradeUt_noID.exe
nk.nbf
ms_.nbf
when upgrading.
the ms_.nbf is where all the old factory programs are coming from its known as the EXTROM.
it houses programs that the factory thinks that should always be installed but not uninstalled by the public, thats why they do not appear in remove programs tab.but we do not need a lot of this stuff as we are now running WM 6.5.
the ms_.nbf that is here -
http://forum.xda-developers.com/showthread.php?t=648067
has already been cleaned of any factory placed program .cabs so you can use that one straight off,it does contain 2 splash images that you could change?
its best not too have any .cabs in ms_.nbf as you will then be able to do this -
http://forum.xda-developers.com/showthread.php?t=332215
hope helps,let us know how u got on....

still having problems with update
hi advanced'
thanks for the help' what ive done was downloaded all thos programes you advised me to.
extracted them to my desktop' installed the one that opens the rom image.
opend the rom image had a look it said i was on o2 but ive unlocked it to my network orange, but i didnt change anything just save the image and came out of the programe.
then i opened windows mobile connected my xdall to it and created a new folder in games called smart, i then copy the ms file and the himaupgrade to this folder.
which ever way i try to run this ie from my windows mobile sysc, i get the same message first it says about update and delete my old software, goes through the checking stage then says update has a problem please take out usb and soft reset device and try again.
and if i try to run it from my mobile it says there is no application associated with ms_ run the application first then openthis file from within the application.
this is driving me up the wall, also i am using windows 7 might that be a problem.
many thanks
basicbri

the HimaUpgradeUt_noID.exe was never made to run on win7 that why we have too tweek.
follow this its for xp/vista but also applies for win 7 -
http://forum.xda-developers.com/showthread.php?t=428469
when all hooked up ie. device in bootloader (you cannot update in win mobile it needs to be in bootloader mode)and all ready to run, make sure u have all 3 files in same folder on desktop pc not win mobile device...
3 files are -
HimaUpgradeUt_noID.exe - update app
nk.nbf - actual win mo 6.5 rom image
ms_.nbf - extrom image
the ms_.nbf can be opened with ER2003Edit_1_4_26.msi and just delete the o2 option from the 2 drop down and type in ORANGE then go - file - save ROM image - exit
after update app has finished make sure you do this before you start up device for first time -
Select the options as follows:
(for selecting use Record Button, change values with Camera Button)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad/Action Button and wait until OS starts.
follow the update instructions for xp on here -
http://forum.xda-developers.com/showthread.php?t=428469
even though you are running win 7 its the same,where it differs is the actual driver install,follow the guide for vista for that..
post how ya got on

thanks for your help but
hi advanced ive put into action all the breakdown that you gave me'
it went into boot mode' showing usb top of screen and version 1.06 at the bottom.
but heres the weird thing' when i run this windows mobile centre without being in boot mode' no problems at all, now im run ning from boot mode through usb on windows 7 it just wont connect it stops with error 101 unable to update.
still a big problem please help .
rgds basicbri

or use the xda dev search function ???
which 6.5 rom are u trying to run...if it one of YAHAHANUVOELEGANLC they can be a bit fussy..what you have to do is copy the .nbf to a completely new folder somewhere on pc and use this update utilty....
post results ...

basicbri said:
hi advanced ive put into action all the breakdown that you gave me'
it went into boot mode' showing usb top of screen and version 1.06 at the bottom.
but heres the weird thing' when i run this windows mobile centre without being in boot mode' no problems at all, now im run ning from boot mode through usb on windows 7 it just wont connect it stops with error 101 unable to update.
still a big problem please help .
rgds basicbri
Click to expand...
Click to collapse
And i say again look in my HowTo!!!

advanced15 said:
which 6.5 rom are u trying to run...if it one of YAHAHANUVOELEGANLC they can be a bit fussy..what you have to do is copy the .nbf to a completely new folder somewhere on pc and use this update utilty....
post results ...
Click to expand...
Click to collapse
thanks for using my version!

flyboyovyick said:
thanks for using my version!
Click to expand...
Click to collapse
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri

basicbri said:
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
Click to expand...
Click to collapse
It should not sync, to be clear.

aeroflyluby said:
It should not sync, to be clear.
Click to expand...
Click to collapse
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri

basicbri said:
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
Click to expand...
Click to collapse
If you have 32 bit windows 7 download attachment from this post http://forum.xda-developers.com/showthread.php?t=428469
unpack it anywhere but remember where it's unpacked, desktop for example.
Then put hima into bootloader mode and into crandle.
Then click on PC :
Start > Right Mouse Click on Computer > in the left you should see Device Manager link, click on this > Go to Portable Devices or something like that, there should me USB Sync or something like this > Click right mouse on it and tap Update driver > Select Browse my computer blabla > click on Let me choose someting blabla, this second option > Click DISC button > Navigate to folder where you opened this and open wceusbsh blabla > select Microsoft USB Sync or something on the list and click next > install driver > Run update and flash, lol

basicbri said:
hi' everyone that has been so kind to help me......great big thank you
it still wont update im using windows 7 when i put the xda in boot mode' then put it in the cradle.
on screen it says usb on the top of the screen and the version number at the bottom.
i then ran himalaya update beta version' it tries to update but then gives a error but im not suprised because it showing no usb conection in windows 7.
but if i put my phone in the cradle without boot mode' it straight away connects to windows mobile sysc' and its fine...........bloody windows 7
what about flashing from sd card ive got a two gig one.
PLEASE PLEASE PEOPLE' SAVE ME FROM MY DAUGHTER WHO WANTS ME TO USE THIS GOD AWFULL PINK PHONE.
sorry for the caps mods' but this situation is urgent.
many thanks people
rgds basicbri
Click to expand...
Click to collapse
And again look in my howto's there is an description for Vista/Win7 32/64Bit

basicbri said:
hi'
ive done all sorts to get this new operating system in with not much luck at all.
i can get boot mode ok it says USB at the top and serial at the bottom, then i open hiyma upgrade put my phone in the cradle' but then it wont syc.
windows 7 is a big pain in my a..e bloody thing.
there must be some one out there that can cure this problem.
many thanks in advance.
basicbri
Click to expand...
Click to collapse
there will be NO icon or message in win 7 that device is connected as long as you have USB at the top of device screen that lets you know it is connected....

hi advanced'
this himalaya xdall is still giving me problems'
ive done all of these' links and downloads to up date this mo fo' but without any luck.
this has been slowly driving me up the wall, even though i have followed to the letter everything page by page.
i dont think this is going to work on windows 7'
my usb icon bottom right of my screen is showing a green and white tick that indicates that my pda is conected but not in the my computer screen, even after i followed the information.
im also getting error 101 on the himalaya ungrader, as i said before what about flashing from my sd card thats got to be worth a try.
also i would like to hear from another members that have upgraded the xdall himalaya with windows 7.
but i do think this alas is not ment to be' my destiny is drawn towards my daughters god awlfull pink mobile.
SAVE ME FROM THIS IT IS NEARLY CHRISTMAS
cheers basic
p/s anyone have any ideas you can email me on
[email protected]

it does work on win 7...done it this end load of times
have u tried installing"Windows Mobile Device Center " which ya get from microsoft web site.
Windows Mobile Device Center - for win 7
ActiveSync - for xp
(if allready installed, uninstall and start fresh)
then when installed restart pc...
then follow -
http://forum.xda-developers.com/showthread.php?t=428469
this great guide is for win 7 as well..follow the Windows Vista guide first to make win 7 play ball then after a pc reset follow the Windows XP guide for the actual updating...
and make sure you go through the different driver install ie. USBAS.zip
the reason for this is that win 7 runs "Windows Mobile Device Center" but the himalaya upgrader needs the drivers from the older "ActiveSync" which runs on xp.
make sure you have -
Uncheck the 'Allow USB Connections' box, and select 'OK'. in "Windows Mobile Device Center" settings before you try hooking up device in bootloader mode...
which WM 6.5 ROM are you trying to run ?
updating on win 7 works...it just takes some tweeking....

advanced15 said:
have u tried installing"Windows Mobile Device Center " which ya get from microsoft web site.
Windows Mobile Device Center - for win 7
ActiveSync - for xp
(if allready installed, uninstall and start fresh)
then when installed restart pc...
then follow -
http://forum.xda-developers.com/showthread.php?t=428469
this great guide is for win 7 as well..follow the Windows Vista guide first to make win 7 play ball then after a pc reset follow the Windows XP guide for the actual updating...
and make sure you go through the different driver install ie. USBAS.zip
the reason for this is that win 7 runs "Windows Mobile Device Center" but the himalaya upgrader needs the drivers from the older "ActiveSync" which runs on xp.
make sure you have -
Uncheck the 'Allow USB Connections' box, and select 'OK'. in "Windows Mobile Device Center" settings before you try hooking up device in bootloader mode...
which WM 6.5 ROM are you trying to run ?
updating on win 7 works...it just takes some tweeking....
Click to expand...
Click to collapse
It's ok to update without windows mobile center, you need just driver.
basicbri, if you followed my guide, you can't fail. It's really impossible to con't get it work with my manual. Try again, even if you didn't yet

[Q]help I can't connect my x1 to pc

this my new phone.. I don't understand my xperia x1 couldn't detect on pc.. How I solve this problem??
Is my pc should install the driver?? or just plug to usb port??
please the instruction...

What os do you use on your pc? What rom on your phone? I little bit more information would be useful if you want somebody to help you.

are u already install activesync on ur pc?

That's why I asked for the os in use. Depending on the os it's Active Synch or the Mobile Device centre.

1. try this:
start --> settings --> usb to pc
untick "Enable advanced network functionally" or you can tick disk drive if you want to transfer files
2. if you are Windows XP users, please install ActiveSync
2. if you are Windows 7 or Vista, please install WMDC aka Windows Mobile Device Centre
it comes with the CD when you bought XPERIA X1 if you don't have it just GOOGLE!
3. If you are a Mac User, try Missing Sync or Sync Mate, IMHO Sync Mate is better
4. If you are Linux User, no idea I have nerver had good sense about Open Source, but try this: http://www.ehow.com/how_7225580_sync-windows-mobile-linux.html
If you have trouble with Active Sync or WMDC (I have experienced that with my Ex o2 XDA mini),
1. find programs that might block COMM port, it might be another PC Suite, in my experience it's my P910 Sony Ericsson Sync and Palm Desktop Manager, just unsintall them
2. Don't forget to tick enable USB @ COnfiguration (aka settings)
3. Find out if your phone detected when you tick "disk drive" @ USB to PC --> If not, might be faulty USB
4. try another PC (Windows) I have found it more compatible than Mac, that's the reason I have never bought and upgrade my Mac.
5. If you still can't access, try another stock ROM and see how it be...
6. If you are Windows User Computer, try to see if your phone really detected @ PC, click start, (Windows 7) click device manager or if youa re on XP, try to search it at Windows Properties, see if there's your device there!
7. Okay if you found it useful, pls click thank's button, I try to make any possibility that is possible. You won't be a zombie if you click thank's button

[SOLVED] Galaxy S Advance stops being recognized by Windows 7 after a while

I have this strange problem:
when I connect my Samsung Galaxy S Advance to my PC, the phone is recognized and I can start downloading my pictures, but, after a while, the download is interrupted and phone is not recognized any more...
Symptoms:
- Phone detected at first time is not detected any more after a while.
- After detection failure, if I try to browse my phone content, either in phone or SD card memory, Windows Explorer freezes.
Tried solutions:
- I've tried disabling and enabling all Developer Options on my phone, but the problem persists.
- Also, I've noticed that, while my phone is connected and recognized by Windows, the command
Code:
adb devices
returns an empty list of devices.
These are my system characteristics:
Phone specs
- Model code: GT-I9070
- Android Version: 4.1.2 (Jelly Bean)
- Baseband: I9070XXLQE (Germany)
- Kernel: 3.0.31-1122398 [email protected] #2 SMP PREEMPT Tue Apr 9 14:55:54 KST 2013
- Version build: JZO54K.I9070XXLQE
- Root: NO
- SD Card: 8GB working and recognized
PC specs
- OS: Windows 7 64-bit
- Installed Software: Samsung Kies, SDK
What can I do?
Thank you very much!

Try reinstall the Kies driver...
Sent from my GT-I9070 using xda premium

i'm not an expert but i would try disabling samsung kies, reinstalling samsung drivers, then plugging cable in different usb port, also could be faulty cable, dirty connectors @ phone, firewall... :fingers-crossed:
edit: razvan wrote @ same time

I have the same problem, the connection is lost when you turn off the screen.

Now I can't even connect the phone to the PC, it is not recognized...
See this thread...
Help please.

If you have wi-fi use samba filesharing.
The problem is with your usb cable-usb port-windows
Control panel -device manager -print screen with universal serial bus controllers

Tarola said:
If you have wi-fi use samba filesharing.
The problem is with your usb cable-usb port-windows
Control panel -device manager -print screen with universal serial bus controllers
Click to expand...
Click to collapse
Unfortunately I don't have Wi-Fi.
Yes, the problem must be with my USB cable, port or Windows.
I attach the screen-shots of the device manager.

ZioAlfredo said:
Unfortunately I don't have Wi-Fi.
Yes, the problem must be with my USB cable, port or Windows.
I attach the screen-shots of the device manager.
Click to expand...
Click to collapse
Tried to turn on usb debugging?
And on some other PC? Is it the same?

shut_down said:
Tried to turn on usb debugging?
And on some other PC? Is it the same?
Click to expand...
Click to collapse
Yes, I've tried to turn on USB debugging but this PC doesn't even recognize the device... I've tried to install drivers from the device manager, without success.
On other PCs I have no problems.

ZioAlfredo said:
Yes, I've tried to turn on USB debugging but this PC doesn't even recognize the device... I've tried to install drivers from the device manager, without success.
On other PCs I have no problems.
Click to expand...
Click to collapse
Then some PC problem. If you have time and nerves - reinstall Windows on that PC. But first try other USB port or something. Rescan with antivirus...

shut_down said:
Them some PC problem. If you have time and nerves - reinstall Windows on that PC. But first try other USB port or something. Rescan with antivirus...
Click to expand...
Click to collapse
Unfortunately, reinstalling Windows on this PC is not an option.
I've tried to change USB port and the automatic driver installation gave the attached result: a partial error... still no recognition as MTP USB device
I cannot see the phone content in Windows Explorer... I don't know what I can do with the successfully installed device "SAMSUNG Android ADB Interface"...

I attach some more screen-shots of the connected and partially recognized Android device properties...
It seems that the modem function of the phone has been recognized by Windows, but I just need the USB storage feature!

ZioAlfredo said:
I attach some more screen-shots of the connected and partially recognized Android device properties...
It seems that the modem function of the phone has been recognized by Windows, but I just need the USB storage feature!
Click to expand...
Click to collapse
I see there is adb driver. Try with this: http://forum.xda-developers.com/showthread.php?t=2105707

shut_down said:
I see there is adb driver. Try with this: http://forum.xda-developers.com/showthread.php?t=2105707
Click to expand...
Click to collapse
Thank you, it worked for few seconds, then it did not find the device any more...

Thank You for your reply in that other topic. Now to this matter.
1. What option did you choose under lock screen? Swipe or None?
2. Even I have faced the problem and the solution i found was simple. This happens when our phone goes into deep sleep and to bring the files back you just need to unlock the phone. Just press the unlock or homescreen button and windows will start recognising the phone again.

Parameswaran Iyer said:
Thank You for your reply in that other topic. Now to this matter.
1. What option did you choose under lock screen? Swipe or None?
2. Even I have faced the problem and the solution i found was simple. This happens when our phone goes into deep sleep and to bring the files back you just need to unlock the phone. Just press the unlock or homescreen button and windows will start recognising the phone again.
Click to expand...
Click to collapse
Hi,
1. None.
2. The screen is always on, Windows loses the connection without apparent reason in the first minute or so of connection. Now is even worse, I've just connected the device and I can't explore the phone folders because Windows just stopped recognizing the phone...

This is what I see in Windows Explorer after connecting the phone: Windows seems to lose connection to it, failing to find files and folders...

unmount your card and try again

Tarola said:
unmount your card and try again
Click to expand...
Click to collapse
This is good and works for re-establishing the connection when it is lost.
I'll tell you if this is the final solution or if the problem keeps showing up after a while.

ZioAlfredo said:
This is good and works for re-establishing the connection when it is lost.
I'll tell you if this is the final solution or if the problem keeps showing up after a while.
Click to expand...
Click to collapse
Did you scan your pc for a virus? If it works on other PC, then obviously it is a problem with the one you use.
Sent from my GT-I9070 using Tapatalk

[Q] Developer Unlock WP Devices (MaxUnsignedApp = 10) Problem

Hey,
i read the thread in the Hacking Section and because iam a new member here i cant post in this thread.
My problem is that i tried to unlock my Phone (Lumia 820) via this Tool (aiyingyong the chinese one) and i get an error after downloading an archive or something like that. See the picture.
I have Win 8.1 64bit, Visual Studio 2012 Update 4 but no WP8 Emulator. But everything else is working like WP Power Tools, XAP Deployer and Unlock and Locking the Phone for Development.
I tried to change the name of the Phone and started the chinese app as Admin.
Just this Tool wont work. I just want the 10 unsigned apps instead of the 2 that i have right now with my free Dev Account.
Can you please help me?

Hey bro...i am too facing this error..."Unable to open archive".
And i have posted in that thread on page 9.
Check my post and SS....
Hoping someone help me there...

Amirphp said:
Hey bro...i am too facing this error..."Unable to open archive".
And i have posted in that thread on page 9.
Check my post and SS....
Hoping someone help me there...
Click to expand...
Click to collapse
Thanks i will check it later

Why don`t you guys try the "Dreamspark/Intuit" trick and gain the 10 apps limit?I know its a little frustrating with all those translations but at the end it`s worth to have a try.

Thanks CV bro for reply....
But...Now My problem solved and my phone is unlocked for 10 app....
 @thread OP....check that thread at that page 10 and ....And follow the steps....thats work perfectly.

Same problem but not getting fixed
I tried it on my Lumia 520 and I too have this problem. I tried the ways mentioned by the member in 10th page of the TUT on doing this but failed. It justs downloads something everytime when i connect phone ( a 10 MB file which i see in the directory of the software). I tried deleting the device drivers and installed it again, failed. I renamed the phone to Lumia 920, failed. I installed the softwares from various sources including the attachment provided by the member who had given some steps for this problem but failed. Can someone help out me

Have u installed wp8 sdk?
and what's the status of Windows developer registration tool...when u connect your lumia 520 to pc...if u already have installed sdk?

Amirphp said:
Have u installed wp8 sdk?
and what's the status of Windows developer registration tool...when u connect your lumia 520 to pc...if u already have installed sdk?
Click to expand...
Click to collapse
I have SDK and my phone was registered but now unregistered it and it detects my phone.

gouthamhere said:
I have SDK and my phone was registered but now unregistered it and it detects my phone.
Click to expand...
Click to collapse
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.

Amirphp said:
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
Click to expand...
Click to collapse
I did everything until Step 4. Connected the phone to the PC without internet on both, and this error happens http://snag.gy/SYnU2.jpg and if i try again with internet on in PC, it downloads something ( http://snag.gy/MGPVd.jpg ) inside the Chinese software and the Launcher Error ( http://snag.gy/ps4P7.jpg ) shows up.
I tried it many times and tried with names Lumia 520, 920 and 1520 but nothing works.
I think its some problem with my drivers though my pc detects it and i can even register and unregister it through Developer Tool provided by Microsoft.

gouthamhere said:
http://snag.gy/MGPVd.jpg.
Click to expand...
Click to collapse
Previously that was happened with me too....
But after new version installed from developer thread...worked that...
And its detects my phone instantly as i connect...did not tried to upgrade.
* I did one more thing on My PC...when i was getting this http://snag.gy/MGPVd.jpg error.
Goto Control pannel > Region and Language > Administrative > Change System Locale > Chinies(Tradistiona, Taiwan).
Apply And Reboot....
Then Uninstall Chinies tool and Repeat the same process what i have mentioned in previous post....thats it.

Hello, sorry for bad english language I'm italian and I'm 14.
You have to click CTRL+R, write "intl.cpl", go to "Administrative" and click "Change System Locale", select "Chinese, Simplified, China", and once applied click Restart now.
After reboot it should work, if you can't do it here's a video that explains everything. (It's in italian)
ww w.youtube . com /watch? v=DWTyIaTMbLY&app=desktop

Amirphp said:
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
I did what u said, after clicking the blue botton,
The gray phone know has an open lock but doesn't happened
anything.
Click to expand...
Click to collapse