Has anyone figured out a registry tweak so that the keypad doesn't disappear after you dial a number on the Tilt. There must be a way to fix it - I notice when I push 1 for speed dial to call my voicemail the keypad remains on the screen, but when I dial any other number it disappears. This is one of the few annoyances I haven't been able to fix on my Tilt. Thanks.
Keep keypad when calling . . .
majek5 said:
Has anyone figured out a registry tweak so that the keypad doesn't disappear after you dial a number on the Tilt. There must be a way to fix it - I notice when I push 1 for speed dial to call my voicemail the keypad remains on the screen, but when I dial any other number it disappears. This is one of the few annoyances I haven't been able to fix on my Tilt. Thanks.
Click to expand...
Click to collapse
Excellent first question!
I don't know the answer, but I'd like to know, too.
Obviously you can hit the left softkey for "Keypad" but that's an extra step that one might prefer not to have to do, but rather have the keypad remain showing, and have the left softkey option be "Call Status"
If you call a lot of numbers where you have to enter more numbers when prompted, this might be the preferred default.
No one knows? I'd love to change this as well.
This is the first "fix" i need to do.
HTC should sort this out and provide a fee down load. They are silly to think it would not be a problem .
There is a fix etc.. but its part of a big bundle of stuff that scares most "newbies" away.
Can someone not make a simple fix just for this problem with a very easy method to download and set up etc
I am sure that many members do not have the technical minds of most of you!
Anyone have a shortcut for enabling call forwarding? I always forward to the same number. I would like to be able to use a button or voice command to bring up the call forwarding screen, and then just click yes/OK to enable or disable it. Anyone else using this?
By the way. I have been using ATT's fast forward service for a couple of years. Do I need to continue paying for this, or will the phone redirect the calls?
Thanks,
Tom
Bump. I'd really love to find how to do this also, I'm doing it several times a day ...
On my 8925 phone I created two contacts.
Turn Forwarding On:
_OnForward
*21*5125551212#
(replace 5125551212 with the areacode and phone number you want to forward your calls to)
Turn Forwarding Off:
_OffForward:
##21#
The _ puts the two items at the top of my contacts list. I click contacts and then press call on the selected forwarding option. Sometimes I get an error message "command not supported", but that is related to my phone's connection strength and not the programming. This has been working well for me for about a year. I have tried to make a couple of buttons that dial the contacts directly from another screen, but that hasn't worked. You have to open contacts and the press call on the option you want.
Later-
Good morning gents.
I have an HTC TyTN II with Win Mobile 6.1
I created the contacts like that and on my "Favorite People" page I put the contact there, it just says :
"Cannot Complete the call. the Signal may be unavailable or the phone number may not be valid. Verify the number or try again later."
From the contact list it works of course.
Another question regarding call forwarding. Is there a way to have an icon on the top bar that says the call ARE being forwarded... I keep missing a couple of calls that end on my home answering machine because I forgot to forward
Vesperatus-
I have all of your same issues. As far as I know, there aren't any solutions. You just have to remember to unforward your phone.....
-Later
I´ve installed 5.x pocketx contact solution and getting following symptom at receiving a call. The expected melody is activated but intermittend and a call answer with the green buttons is not working. Must i disable the original phone contact programm to allow fully access by pocketx contact? If yes, how? Thanks for your help!
Sometimes I get Incoming Call popup (the one with the caller picture) behind the bottom bar, just like it can't get focus from the OS. Soft reset resolves the issue but are there any ideas why is that happening?
I'm having exactly the same issue. I use native HTC 6.1 ROM.
So now we know it doesn't depend on the ROM since I am using native 6.0
Incoming Call not showing all info
Same problem here: Incoming Call not showing all info. But without solution.
I've had it quite a bit as well. I started using S2U2 for my full screen incoming call manager and it works great.
Use Case:
1. Call a conference call number eg: WebEx
2. You are asked to enter the meeting number
3. You press the numbers but no tones are played
Had a tech support call with Samsung just now.
Firstly they say this isn't a feature on EU Note 8s (WTF!)
Then say it should work out of the box and my phone is faulty so take it to a Samsung centre for evaluation / exchange
I reckon this is a software bug. Can someone else in the EU dial any number and when you're connected to the call, press a number on the dial pad and tell me if you hear the tone played?
Im not in EU, but in the states it works fine, i have many conference calls daily and it always works for me entering my codes to get into the call. It should be working fine on your model as well, possible a issue with the carrier side of things or its turned off in the hidden settings.
Edit:
Try ##DATA#, if it brings up a menu, put in 000000 as your msl, then go to More, then go to DTMF SET. See if its off or not set at all? US model has a option here for this at least.
Hi
The ##2832# doesn't work on my phone. It's a real pig seeing as I work remotely!
Don't even seem to be able to use a 3rd party DTMF tone generator either (well I can but the system at the other end isn't hearing the tones).
joebongo said:
Hi
The ##2832# doesn't work on my phone. It's a real pig seeing as I work remotely!
Don't even seem to be able to use a 3rd party DTMF tone generator either (well I can but the system at the other end isn't hearing the tones).
Click to expand...
Click to collapse
I have a Galaxy N950N and I have this same issue. Did you ever get this working? I can't seem to find a secret service menu to enable it, and I know I'm doing something wrong here.
Hi
Not specifically a fix but the only place I'm having issues with is WebEx. If you try your voicemail, does that work ok? Mine is fine but for some reason WebEx isn't
joebongo said:
Hi
Not specifically a fix but the only place I'm having issues with is WebEx. If you try your voicemail, does that work ok? Mine is fine but for some reason WebEx isn't
Click to expand...
Click to collapse
Mine doesn't work across the board, irrespective of voicemail or other conference call. No dial tone is played in-call when you press the dial pad.
ajm786 said:
Mine doesn't work across the board, irrespective of voicemail or other conference call. No dial tone is played in-call when you press the dial pad.
Click to expand...
Click to collapse
Figured it out. It's the CSC. Apparently, it doesn't work properly with the N950N (at the least the one I had installed, which was default with the Renovate ROM). I had to use the Flashable CSC Selection V1.2.5 from Tkkg1994, manually add the greatlte line into it, and once flashed, I got all the options in the dialer for TTY (I think which relates to DTMF), and most importantly, sound feedback when pressing the dialpad while in-call.
Solution
Go to settings -> sound and vibration -> uncheck the the dialling keypad tones(if checked).
Hope this helps!
this works. Go figure... you disable the dialling keypad tones and you can now use the keypad tones. Thanks for the help. This has infuriated me for months
I had not payed any attention to this, as I used some services that require you to input numeric options during call, and all worked fine, but, yes, no tones heard, but the tones are sent anyway
What worked for me was dialing the original number manually - not from the phone memory or contacts!
I use a Gigaset HC450 Doorbell that is able to divert a call.
This is a rare device, check ebay, it is a DECT phone on a Siemens Gigaset IP Base Station with a SIP provider configured)
So if someone presses the doorbell button on the Gigaset HC450 and status is set to AWAY
then the configured SIP provider inside the BASE station does an external call to my mobile because I set up my mobile number inside the HC450 Menu for Diversion
So my mobile is a Samsung Note 8, at the moment i run Stock Hungarian unbranded firmware N950F
When there is a call from the doorbell, there is a sentence said by a female voice: "Doorbell is ringing, to connect press 1, to stop press hash"
I cannot proceed by pressing 1, neither with Dialpad tones activated nor deactivated, and also a 3rd party DTMF tone generator does not work
Someone in this thread said it was fixed by flashing different CSC, which i think is not true because many said that they got webex fixed by simpy DEACTIVATING dialpad tones
I am greatful for all ideas that you have in order to get this working, its a new challange and I found this thread so I posted my topic here, too
Thank you very much for reading