I´ve installed 5.x pocketx contact solution and getting following symptom at receiving a call. The expected melody is activated but intermittend and a call answer with the green buttons is not working. Must i disable the original phone contact programm to allow fully access by pocketx contact? If yes, how? Thanks for your help!
Related
Hi,
I'm experiencing some problem with phone module.
Problem is as the follow:
When I push the green buttuon (on the left side) no dial pad appears
When I push phone icon on start menu no dial pad appears
when I push on phone icon of phonealarm, list of missed call appears
I can receive phone call and I can perform phone call from contact list or from missed call list but I do not have any dialpad menu (i.e. no speakerphone activable etc).
I've tryed with various dialpad but the problem persist is not a problem of dialpad.
I use WM5 original ROM with GPS active.
Is it possible to re install phone module?
Could some one post the cab
As you may understand this bug is very frustrating, I have a wonderful device but it is not able to do the basic function required to a phone: dial a number and start a conversation
thank you very much for your help
regards
j
Hi!
I used this software before in my Ipaq. However when I tried this in my Kaiser, had a feeling that it slowed my Kaiser and also freezed it.
Anybody know software which is doing:
- Answer preconficured sms-message to caller if I am not answer or press hang-up
- Add this call to my calendar, with text what sent to caller
- Check my next availibility time and adds it to that sms
Like: "Automatic response: I am not available right now. I'll call you bac as soon as possible. According to my calendar I'm free at 14:30."
Like that... you can check sms notifier software from the webpage: http://www.codeplex.com/SMSNotifier
Nobody have any suggestions?
Try http://www.pocketx.net/products/photocontactspro_sm/
Dear Bro,
I am a Nokia convert to Diamond, i was wondering when i received an sms and i would like to call that no. instead of reply, is there a shortcut way?
Cos used to it in Nokia when i view an sms i can just press the call button to call the no. which the sms from.
But in T3DFlo, i can't, is there anyway? or any tweak or software which i can do?
Thanks in Advance.
David Wong
Just click on the persons name/number at the top of the text thread. That will then open the call history log with that person and you can press call to phone them.
Thanks unwire54, but your method only works if the person is already in my contact list, if the person is not in the contact list it will prompt me to add the person to my contact list... if i click no it will dismissed and i back in the message window, cannot call.
Hence i need a way / tweak / app to allow me to call the no. (which the sms was sent from), no matter whether the person is in my contact list.
Is there a way?
anyone knows?
davidwong said:
when i view an sms i can just press the call button to call the no. which the sms from.
David Wong
Click to expand...
Click to collapse
same thing works on diamond. after pressing the call button you'll get a confirmation request ("Verify the number is correct:")of the number and....you can call
have u tried?
it works!!
Thanks KukurikU and unwired4
though i need to dismissed the keypad 1st before i can do so but it works!!
same thing works on diamond. after pressing the call button you'll get a confirmation request ("Verify the number is correct:")of the number and....you can call
have u tried?
I can't do it, can you help me? I have your same rom
maximo88 said:
same thing works on diamond. after pressing the call button you'll get a confirmation request ("Verify the number is correct:")of the number and....you can call
have u tried?
I can't do it, can you help me? I have your same rom
Click to expand...
Click to collapse
go to the sms, be sure you are in the reply box but dismissed the keypad and press the call button. another method is go to all message scroll down to the message but not opening it and then press the call button
THank you very much, I have learnt very well xDD
But I think that touch flow3d needs improvements, because I would prefer to can call without enter in windows mobile's interface
yea i agree
In my old Wizard when you where reading a message just pressed the call button and it asks for number confimation and then press call againan you will dial the person that set the message.
However I thinks its not posible via Touchflo3D app, you need to be in the messages already.
can somebody please tell me how can I send DTMF tones during a call? I searched in everywhere, but couldn't find any clear answers. do I need to install another application?
thanks for ur answers guys..
(HTC Diamond, wm6.1)
as i understand dtmf is enabled by default. i use it all the time with my phonebank.
yes it is enabled in my phone too, but there is no option to send DTMF tones. I am not talking about hearing those tones while dialling a number. what I mean is I made a phone call and connected, and then I want to send a number from my contacts. this is very practical when using the calling cards.
thanks
Press the keypad soft key(left) to bring the phone keypad.
I know it's not "hearing" the tones, as I said I use them to get access to my bank via the phone and that naturally involves quite a few numbers to be received by the other end. And this is carried out rather silently. Unfortunatly I haven't seen a "send number with DTMF" option. Maybe you indeed have to get an extra app to get that to work. The only place i've ever seen an option to even choose DTMF being enabled whatsoever is in schap's advanced config. I can vaguely recall such an option on an old Nokia pone. Sorry though for not being able to help.
ok, thanks for your comments. I appreciate if anyone lets us know if finds such a program.
I use DTMF tones to navigate in my voicemail and everything works fine here.
Hi!
I'm kinda new here so bare with me...
i've searched without any luck to finding the answer to my question...
When someone calls me, the diamond gives me the choice to reject the call and texting the caller with a predefined message...the problem is that i have to actually send the damn message after haning up...wich kinda takes the whole idea away of having the phone doing it...
Now, is there anyway i can make the damn sms get sent without me having to actually click the send button?? just reject the call and let the phone do the job?
Come on, somebody has got to have had the same issue?
Go to Settings.. Phone... Advanced (right at the right hand end) then de-select "Reject call with text message"
i think you misunderstood me, i don´t want to turn off the feature, just make it do the whole procedure and not stop right before the message gets sent.
Uncheck the option to edit the text message, on the advance tab.
Well nobody is understanding what he is saying.
This is a good idea, infact i also wanted to do the same thing.
What we want is that as soon as we reject the call with send text button phone should directly send the message to the caller (with predefined text) without opening the predefined compose messsage and then we click send again to let the sms shoot to the caller.
I think this feature wont be possible with soft reject or hard reject key coz then it will send sms to each and every caller or even to landline caller. There should be other soft key just like "Send Text" soft key where we press it and automatically phone sends the sms to the caller.
Hope i am able to explain.
Regards,
Vishal
Reject++
If you are looking for an app to let you reject incoming calls with predefined or custom SMS and setup a reminder to return a call as well..
so check Reject++
You can:
- Reject a call with SMS, Reminder, Or Both.
- Convenient Slider on top of incoming call screen, slider it up and go with Reject++
- Smart SMS Templates with "Tags"
- Smart Reminders Scheduling Engine.
- Works with mobile screen locked or OFF
- Notifications works no matter if the app is active or not.
Check much more Features & Screenshots for Reject++