Has anyone figured out a registry tweak so that the keypad doesn't disappear after you dial a number on the Tilt. There must be a way to fix it - I notice when I push 1 for speed dial to call my voicemail the keypad remains on the screen, but when I dial any other number it disappears. This is one of the few annoyances I haven't been able to fix on my Tilt. Thanks.
Keep keypad when calling . . .
majek5 said:
Has anyone figured out a registry tweak so that the keypad doesn't disappear after you dial a number on the Tilt. There must be a way to fix it - I notice when I push 1 for speed dial to call my voicemail the keypad remains on the screen, but when I dial any other number it disappears. This is one of the few annoyances I haven't been able to fix on my Tilt. Thanks.
Click to expand...
Click to collapse
Excellent first question!
I don't know the answer, but I'd like to know, too.
Obviously you can hit the left softkey for "Keypad" but that's an extra step that one might prefer not to have to do, but rather have the keypad remain showing, and have the left softkey option be "Call Status"
If you call a lot of numbers where you have to enter more numbers when prompted, this might be the preferred default.
No one knows? I'd love to change this as well.
This is the first "fix" i need to do.
HTC should sort this out and provide a fee down load. They are silly to think it would not be a problem .
There is a fix etc.. but its part of a big bundle of stuff that scares most "newbies" away.
Can someone not make a simple fix just for this problem with a very easy method to download and set up etc
I am sure that many members do not have the technical minds of most of you!
Related
On the nokia's when in a call u can use dtmf which will dial a number in ur phonebook whilst on the phone... i've tried this on the xda but dont know where or how to do it.... can any1 tell me how i go about getting this done?
Thx in adv.
http://dialdtmf.sourceforge.net/
"dialDTMF a Pocket PC (Pocket Contact) plugin to dial telephone numbers using DTMF's (aka Dual Tone Multi-Frequency)"
s
I've always found that you can just dial numbers while you're in a call, you just use the... dialpad. :/
I had one contact which dials one of those 0870 numbers for cheaper international calls, someone pointed out to me that to get the phone to pause inbetween dialing a number, you could setup a Contact with commas to achieve a pause (I think each comma pauses the dialing for about a second)... So I have 0870234821,,001598238 (for example, the numbers aren't real numbers, but you get the idea).
I've always found that I can just dial on the keypad if I'm in a call though, you just dial and it dials the DTMF. Am I missing a trick here? I've not installed any other dialing software, I'm just using the supplied software, just with the default skin.
i know wot u mean.... but i'm contstantly having to dial numbers whilst in call, so it would be useful to have a tool that will allow you to do this rather than dummying number and having a pause for different dtmf's
shaice said:
http://dialdtmf.sourceforge.net/
"dialDTMF a Pocket PC (Pocket Contact) plugin to dial telephone numbers using DTMF's (aka Dual Tone Multi-Frequency)"
s
Click to expand...
Click to collapse
i've tried this software but whilst incall, it doesnt trigger off... am i doing something wrong.
I see what you mean...
... Here's a thought; how about recording some combos of DTMF tones to predefined wave files, and triggering them on the phone whilst you're in a call? There's a chance the phone might pick them up as they're being played, and relay them down the line... Just a thought for this morning, one I've not tried in practice yet, but it might work.
it is good to use.
i use short tone and delay time change to 50ms.
nice !
thanks a lot
Can't get dialDTMF to work. The tones are played when I go to contacts -> dialDTMF, but only when NOT in a call. If I'm in a call and try to use dialDTMF nothing happens after I pick either work/home/mobile number.
Or am I using this tool the wrong way?
Hello
can somebody help me understanding the difference betwenn Voice command and speed dial and if I can use both on the same PDA ?
So far I understand that
- Speed Dial dials numbers and start programs by using voice tags
- you need to train each name to be recognized
- there is no true voice recognition
- Voice command dials numbers and starts programs by voice recognition
- in addition VC reads calendar entries and SMS/E-Mail
- there is no training mode to increase accurancy
So which program would provide better results for recognize and dial numbers by voice ?
Can I run both in parallel and use VC for the calendar function and Voice speed dial for the dialing ?
Plus I try to install VC 1.6 now .. but the button maps only to the explorer button on my TytnII .. not able to move him to the voice record button with the button application in settings
any suggestion / fix
Thanks freecall
freecall said:
not able to move him to the voice record button with the button application in settings
any suggestion / fix
Click to expand...
Click to collapse
I have the same problem.... any solution?!?!?!?
Cyberon is crap. I posted a detailed procedure for replacing it here:
http://forum.xda-developers.com/showthread.php?t=337501
I have installed Cyberon voice commander v2.0 and i am very happy with it when i use it with my bluetooth!!!
My only problem is that i do not know how to assign this program to the default "button 6".
I think default settings are:
"Button 6" --> Cyberon voice commander and
"Button 6 (Hold)" --> Record. (This one works).
hmm that sounds like a drastic deinstall .. so anyway to get the Voice speed dial back without doing a full hard reset if I would it like better than VC after some testing ?
Freecall
M$ Voice Command ROCKS!
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Russ741 said:
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Click to expand...
Click to collapse
I have to agree with Russ. Microsoft Voice Commander is by far the best ~$17.00 I have spent for this phone, as well as the 8125 I had before this. The Voice regconition is awesome. I did have to change the buttons as described above. I chose the camera button as I never use the camera anyway. It works great with my HT700(headset) as well as the HT820(bluetooth headphones). The options allow for a good level of customization as well.
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
freecall said:
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
Click to expand...
Click to collapse
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Russ741 said:
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Click to expand...
Click to collapse
I did not uninstall Voice Dial. IF you want to hear the calls and emails, make you configure VC properly. There is settings for only:
1.) Only announce during Free-Time. Make sure you check that one to whatever you want.
2.) Only High Priorty Emails get annouced. Again, check whichever option you want.
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Say "What can I say?" and you'll have your answer...
simon-ph said:
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Click to expand...
Click to collapse
or go to the Microsoft website and look up VoiceCommand 1.6 for PPC. The list is really quite long!
Russ741
Any ideas Gang?
So, after following the thread for removing voice dialer and remapping the PTT button to become button 6 and button 6 (hold) VC is still not announcing incoming calls (and yes I have configured the options!) anyone have any idea why it would perform 90% of its duty and not the last 10%?
Russ741
Are you sure it's not announcing them, or is it possible it's announcing them through the "wrong" speaker? If you've got it set to use BT, BT, and only BT, then all of the announcements go through the headset, or don't get made if it's not currently connected (like walking out of range and then back in).
I tweaked mine to announce only through the speaker, then turned it off because the robot voice annoyed me, but at first I thought it wasn't working...
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
It's based on the contact name, so "Call Smitty" will confuse it.
Is it possible to send messages just using voice or only receive them?
jackjohnson said:
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
Click to expand...
Click to collapse
It is based on what ever names you have in contacts so, for example if I want to call my office I say; "Call work" since there is only one number in the contacts database VC doesnt ask for Mobile, home or work. And since my office is just listed as First Name: Work Last Name: <blank> it understands.
Russ741
emmit said:
Is it possible to send messages just using voice or only receive them?
Click to expand...
Click to collapse
I simply reads the text or email to you, so there is no way to compose a message with VC.
Russ741
so with my 8125 when sending a text message, i was able to type the first few letters of a contacts name in to the recipient line and it would show me possible matches, how can i get this for the tilt?
Very true, it's quite annoying. Pressing Check Names works in the same way, but it's an extra step for no reason.
I've been using Finger Friendly Friends as a way of avoiding this, but you have to pay for it. I'd be interested in a reg hack.
My Tilt just does it. I use the Palm Threaded so I dont know if that helps or not.
by defaut, it should coms automatically...
check if u just installed kaiser tweak..it is known bugs and could be resolved by Disable D-Pad Scroll Navigation for PocketIE
hope this would help
Anyone have a shortcut for enabling call forwarding? I always forward to the same number. I would like to be able to use a button or voice command to bring up the call forwarding screen, and then just click yes/OK to enable or disable it. Anyone else using this?
By the way. I have been using ATT's fast forward service for a couple of years. Do I need to continue paying for this, or will the phone redirect the calls?
Thanks,
Tom
Bump. I'd really love to find how to do this also, I'm doing it several times a day ...
On my 8925 phone I created two contacts.
Turn Forwarding On:
_OnForward
*21*5125551212#
(replace 5125551212 with the areacode and phone number you want to forward your calls to)
Turn Forwarding Off:
_OffForward:
##21#
The _ puts the two items at the top of my contacts list. I click contacts and then press call on the selected forwarding option. Sometimes I get an error message "command not supported", but that is related to my phone's connection strength and not the programming. This has been working well for me for about a year. I have tried to make a couple of buttons that dial the contacts directly from another screen, but that hasn't worked. You have to open contacts and the press call on the option you want.
Later-
Good morning gents.
I have an HTC TyTN II with Win Mobile 6.1
I created the contacts like that and on my "Favorite People" page I put the contact there, it just says :
"Cannot Complete the call. the Signal may be unavailable or the phone number may not be valid. Verify the number or try again later."
From the contact list it works of course.
Another question regarding call forwarding. Is there a way to have an icon on the top bar that says the call ARE being forwarded... I keep missing a couple of calls that end on my home answering machine because I forgot to forward
Vesperatus-
I have all of your same issues. As far as I know, there aren't any solutions. You just have to remember to unforward your phone.....
-Later
Use Case:
1. Call a conference call number eg: WebEx
2. You are asked to enter the meeting number
3. You press the numbers but no tones are played
Had a tech support call with Samsung just now.
Firstly they say this isn't a feature on EU Note 8s (WTF!)
Then say it should work out of the box and my phone is faulty so take it to a Samsung centre for evaluation / exchange
I reckon this is a software bug. Can someone else in the EU dial any number and when you're connected to the call, press a number on the dial pad and tell me if you hear the tone played?
Im not in EU, but in the states it works fine, i have many conference calls daily and it always works for me entering my codes to get into the call. It should be working fine on your model as well, possible a issue with the carrier side of things or its turned off in the hidden settings.
Edit:
Try ##DATA#, if it brings up a menu, put in 000000 as your msl, then go to More, then go to DTMF SET. See if its off or not set at all? US model has a option here for this at least.
Hi
The ##2832# doesn't work on my phone. It's a real pig seeing as I work remotely!
Don't even seem to be able to use a 3rd party DTMF tone generator either (well I can but the system at the other end isn't hearing the tones).
joebongo said:
Hi
The ##2832# doesn't work on my phone. It's a real pig seeing as I work remotely!
Don't even seem to be able to use a 3rd party DTMF tone generator either (well I can but the system at the other end isn't hearing the tones).
Click to expand...
Click to collapse
I have a Galaxy N950N and I have this same issue. Did you ever get this working? I can't seem to find a secret service menu to enable it, and I know I'm doing something wrong here.
Hi
Not specifically a fix but the only place I'm having issues with is WebEx. If you try your voicemail, does that work ok? Mine is fine but for some reason WebEx isn't
joebongo said:
Hi
Not specifically a fix but the only place I'm having issues with is WebEx. If you try your voicemail, does that work ok? Mine is fine but for some reason WebEx isn't
Click to expand...
Click to collapse
Mine doesn't work across the board, irrespective of voicemail or other conference call. No dial tone is played in-call when you press the dial pad.
ajm786 said:
Mine doesn't work across the board, irrespective of voicemail or other conference call. No dial tone is played in-call when you press the dial pad.
Click to expand...
Click to collapse
Figured it out. It's the CSC. Apparently, it doesn't work properly with the N950N (at the least the one I had installed, which was default with the Renovate ROM). I had to use the Flashable CSC Selection V1.2.5 from Tkkg1994, manually add the greatlte line into it, and once flashed, I got all the options in the dialer for TTY (I think which relates to DTMF), and most importantly, sound feedback when pressing the dialpad while in-call.
Solution
Go to settings -> sound and vibration -> uncheck the the dialling keypad tones(if checked).
Hope this helps!
this works. Go figure... you disable the dialling keypad tones and you can now use the keypad tones. Thanks for the help. This has infuriated me for months
I had not payed any attention to this, as I used some services that require you to input numeric options during call, and all worked fine, but, yes, no tones heard, but the tones are sent anyway
What worked for me was dialing the original number manually - not from the phone memory or contacts!
I use a Gigaset HC450 Doorbell that is able to divert a call.
This is a rare device, check ebay, it is a DECT phone on a Siemens Gigaset IP Base Station with a SIP provider configured)
So if someone presses the doorbell button on the Gigaset HC450 and status is set to AWAY
then the configured SIP provider inside the BASE station does an external call to my mobile because I set up my mobile number inside the HC450 Menu for Diversion
So my mobile is a Samsung Note 8, at the moment i run Stock Hungarian unbranded firmware N950F
When there is a call from the doorbell, there is a sentence said by a female voice: "Doorbell is ringing, to connect press 1, to stop press hash"
I cannot proceed by pressing 1, neither with Dialpad tones activated nor deactivated, and also a 3rd party DTMF tone generator does not work
Someone in this thread said it was fixed by flashing different CSC, which i think is not true because many said that they got webex fixed by simpy DEACTIVATING dialpad tones
I am greatful for all ideas that you have in order to get this working, its a new challange and I found this thread so I posted my topic here, too
Thank you very much for reading