i dont like to use touch flo and would like to know if someone has found a way to disable it ?
thanks, eric
their is touchflo option in settings (under system I think), should allow you to disable it
Go to the the TODAY settings...
From the Today Screen:
1. Go to SETTINGS
2. Select TODAY icon
3. Select ITEMS tab (at the bottom)
4. UNCHECK the "HTC Home" item
5. Click OK and go back to the Today Screen
It should be gone!
TEC
the touchflo (finger panning) option is the one i want to turn off.
i still want to keep the htc home in my today screen.
aaronsmckee said:
their is touchflo option in settings (under system I think), should allow you to disable it
Click to expand...
Click to collapse
there is only one checked box about the sound on/off when panning. no where to disable it.
I'd love to turn touchflo off. It seems pretty worthless. It scrolls a page to slowly and in PIE its hard to get it to stop when u get to a spot you want to view.
technillion said:
From the Today Screen:
1. Go to SETTINGS
2. Select TODAY icon
3. Select ITEMS tab (at the bottom)
4. UNCHECK the "HTC Home" item
5. Click OK and go back to the Today Screen
It should be gone!
TEC
Click to expand...
Click to collapse
I had followed above with soft reset also, but still the "touch flo" function running in PIE. This is pretty annoying and useless function if you used to your finger scrolling webpages with PIE plus.
Another one can helps..Thank.
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Jason Lee said:
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Click to expand...
Click to collapse
That worked perfect neighbor. The touchflo scrolling made it near impossible to drag separator lines. I greatly prefer to tap in the scroll-bar field to page up/down. Thanks again.
jamespaulritter said:
That worked perfect neighbor. The touchflo scrolling made it near impossible to drag separator lines. I greatly prefer to tap in the scroll-bar field to page up/down. Thanks again.
Click to expand...
Click to collapse
Out of curiosity does that change also speed up PIE scrolling the normal way ? - cos it's super laggy and worse than TyTn in the out of the box setup.
Mike
Well if i hold my finger in the scroll bar field it will page up/down at 4 pages a second. The reg edit doesn't seem to have changed anything other than the touchflo scrolling
TouchFlO Scrolling and Sound
A Couple questions here:
Is there a way to tweak touchflo scrolling such that it only goes one page length at a time, instead of 4 or 5?
Is there away to turn of the clicking sound as it scrolls?
I'm assuming these are just annoyances of an immature feature that was rushed out the door, but hoping there are fixes available or that HTC is smart enough to fix the problems in future releases.
MardiG said:
A Couple questions here:
Is there a way to tweak touchflo scrolling such that it only goes one page length at a time, instead of 4 or 5?
Is there away to turn of the clicking sound as it scrolls?
I'm assuming these are just annoyances of an immature feature that was rushed out the door, but hoping there are fixes available or that HTC is smart enough to fix the problems in future releases.
Click to expand...
Click to collapse
Have you even looked at the settings in your tilt\Kaiser? you would have found atleast on answer to your questions just by looking around and learning your device!
I guess to each his/her own, but I personally think the TouchFLO interface is a huge improvement in usability. Perhaps it just takes some getting used to. And with TouchFLO, you can still essentially do all the things you could without TouchFLO. E.g. the scroll bars are still there to be used if you like that. And you can still use the stylus for normal operations. There seems to be some confusion about how it works so let me explain the "use cases".
The way TouchFLO works is this:
- use a finger (not your fingernail) to "drag" the screen up/down (or even left/right if the page is wider than the screen). The page should drag with your finger. It's semi-smooth. Not truly smooth, but smooth enough. When you drag, DON'T lift your finger from the screen till you've got it positioned to your desired spot.
OR
- If you use your finger (not your fingernail) to swipe up or down AND LIFT your finger fromthe screen as you do it, then the screen with scroll by itself to the end in that direction or until you tap the screen again to stop it.
OR
- if you use the stylus or your fingernail, then it will NOT scroll like above. It will then behave like a normal stylus control (highlites and selects instead of scrolling).
So, the screen reads a broad touch (like your finger) differently than a narrow/pinpoint touch (like your nail or stylus).
once I got used to it, i found it to be an excellent upgrade in the interface. I don't think it was a "feature that was rushed out the door" at all. in fact that it reads the stylus and your finger differently speaks to the idea that thought went into it.
Use it on a web page to see the different use cases. If you browse a PDF file, it'll drag even with a stylus because you can't "highlight and select" within a PDF file, so it knows that use case is invalid.
Also, You can change the sensitivity by using a reg tweak: HKLM-DRIVERS-TOUCHPANEL-PRESSURE THRESHOLD. Increase/decrease it for more/less sensitivity.
technillion said:
From the Today Screen:
1. Go to SETTINGS
2. Select TODAY icon
3. Select ITEMS tab (at the bottom)
4. UNCHECK the "HTC Home" item
5. Click OK and go back to the Today Screen
It should be gone!
TEC
Click to expand...
Click to collapse
You do realize this has nothing to do with TouchFlo ... right?
jomo25 said:
There seems to be some confusion about how it works so let me explain the "use cases".
Click to expand...
Click to collapse
Nice writeup, thanks!
Richard "Still Jonesing for a Tilt"
I wish there was a way to partially disable the Kaiser implementation of touchflo --specifically, the feature where if you drag scroll and your finger ends up at one of the edges of the screen (which is really easy on a 2.8" screen using your thumb) it goes into the continuous scrolling mode. I wish those edge regions of the screen were treated just like any other.
Jason Lee said:
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Click to expand...
Click to collapse
Thanks from me too for this tip. I don't use TouchFLO and I found the touchscreen on my TyTN II a bit annoying with this enabled. Sometimes it wouldn't react to tapping so I had to tap twice. This was maybe one out of every three or four taps.
Jason Lee said:
Try changing HKLM\Software\OEM\TFLOSettings\EnableScroll to 0 then reboot.
I haven't tried it yet.
Click to expand...
Click to collapse
didnt work for me, im using windows mobile 6.5, and its annoying to have the 6.5 scrolling and touchflo at the same time...
jonrulezz said:
didnt work for me, im using windows mobile 6.5, and its annoying to have the 6.5 scrolling and touchflo at the same time...
Click to expand...
Click to collapse
Please don't go digging in the graveyard, it disturbs the other corpses
Try going to settings>today>items>uncheck touchFlo
Related
Is there a way for the scroll wheel to "scroll" within rows. For instance, I have SPB Mobile Shell and Phone Alarm installed. Both apps have multiple icons in a row. I can scroll to a row, but I can't scroll along a row.
Is there a fix for this?
Thanks in advance.
i'll take the silence as a no
diar said:
i'll take the silence as a no
Click to expand...
Click to collapse
You might be right but it's generally considered reasonable to give it at least one if not a couple of days before bumping a thread.
So ironically, here's a free one on me!
Mike
i noticed that when i click programs or settings and use the scroll wheel it scrolls through every item in those areas. it just won't do it on the today screen.
i'll be a guinea pig. does anyone know the registry keys that govern the scroll wheel?
I am also interested in figuring this Horizontal Today Screen Wheel Scrolling...
It's a Scroll WHEEL, not a Track Ball!
unksr00t said:
I am also interested in figuring this Horizontal Today Screen Wheel Scrolling...
Click to expand...
Click to collapse
Isn't this why we have a D-Pad?
How can you expect a 1-dimensional control to work in 2 dimensions?
In Schap's ROM, the scroll wheel does scroll across the HTC Home.
2-dimensions
Geez chill cushcalc. I don't think he wants the wheel to be able to scroll up/down and left/right at will. Instead I think he wants it to scroll through each item in each today plug-in, instead of just scrolling from one today plug-in to the next. I.E.- scrolling down goes from the 1st item in htc home for example, to the second, to the third, etc... and then from the last htc home item to the first item in the next today plug-in. I know, I know, there are tons of retards posting tons of uber-retarded questions on this forum, but diar is posing a valid question.
sWuRv said:
Geez chill cushcalc. I don't think he wants the wheel to be able to scroll up/down and left/right at will. Instead I think he wants it to scroll through each item in each today plug-in, instead of just scrolling from one today plug-in to the next. I.E.- scrolling down goes from the 1st item in htc home for example, to the second, to the third, etc... and then from the last htc home item to the first item in the next today plug-in. I know, I know, there are tons of retards posting tons of uber-retarded questions on this forum, but diar is posing a valid question.[/QUOTE
Mines does that. I thought that was normal. No? Never mind. On the Ver4 beta, it doesn't .. Sorry bout that
Click to expand...
Click to collapse
diar said:
Is there a way for the scroll wheel to "scroll" within rows. For instance, I have SPB Mobile Shell and Phone Alarm installed. Both apps have multiple icons in a row. I can scroll to a row, but I can't scroll along a row.
Is there a fix for this?
Thanks in advance.
Click to expand...
Click to collapse
Here's a free bump. Would love to have this feature as well, cuz I'd really to have one-handed use on the PDA. Using the D-pad requires thumb gymnastics which may result in dropping the phone
Even better, if there'd be a way to switch the scroll mode from line-by-line to page-by-page in certain cases, i.e. while browsing a document, or a web page.
Hello everyone, i asked this question in the 'post your today screen' thread but got no answer so will try asking here:
I recently installed the htc home customiser and changed a few things around and generally had a play with it to see what i could create from my today screen. I then decided i was happy with how the original htc one looked so i changed it back. Unfortunately i have a slight problem.
Originally, under the htc home section i had tasks, appointments, tomtom, etc etc showin up and there was a scroll bar on the right hand side that allowed me to scroll down the list, all while keeping htc home in the same position at the top. Now though, i have a scroll bar that extends all the way up the right hand side of the screen whereas before it only went as far as the bottom of htc home. It now covers up part of the date and the sound settings button. When i scroll down my list of shortcuts, it now also scrolls htc home also. (i hope my description makes sense)
It is very annoying and also makes my home screen look ugly. Does anyone know how i can get it back to how it used to be?
thanks very much in advance!
You can fix this by updasting the registry directly. There may be another way, but off the top of my head, I don't know.
Check your entries under the registry item: HKLM/Software/Microsoft/Today/Items
Under there, you will see an entry for every Today plugin you have available in your Today settings window.
Select one and you see it has entries called:
- Enabled
- Flag
- Order
- Selectability
- Type
under each one.
- Enabled denotes if its checked for your Today screen (1 is on, 0 is off)
- Order denotes the sequence it is on the Today screen. The lower the number the higher on the screen, so usually, HTCHome is the lowest enabled since it at the top.
- Type denotes whether it is one that is "movable" or not.
Type is the one that you need to modify. Type can be 0 (moveable) or 5 (non-movable). Type 0 ones can be moved up and down in the Today settings screen, where as Type 5 ones cannot.
The issue is that if the Today screen content is too much to fit on the screen, it auto adds the scroll bar. BUT it will only make the part of the screen occupied by movable activated plugins scrollable.
Before you customized, it HTCHome was likely a Type 5, and it was Order 1 (or something low since its at top). And all others were Type 0. Thus the scrollable section DIDNT include the HTC Home. Somehow, your HTCHome type is now 0, so it is scrolling along with everything else.
Hope this helps. Of course, manually modifying the registry has inherent danges, so be careful, and I take no responsibility if you mess up (disclaimer ).
This might be configurable and modifiable via HTC HOME Customizer app itself, but not sure...I just know the above is how I would fix it if I needed to.
Cheers for that mate, i will have a look tomorrow and see if i can sort it out.
in the home customizer go to the "options" tab and check "Lock plugin on the today screen" ... this will solve your problem!
Today screen keeps scrolling up
I don't know if this is the right post to ask, but you guys seemed pretty knowledgeable about today screen...
What happens is that whenever I scroll down (with the scroll bar) my today screen, it keeps scrolling back up to beginning screen automatically.
Only way to avoid this is to scroll all the way to the bottom and then it stops there. Then I can scroll up to see my today plugins which are in the middle (e.g. if you can scroll 4 times down - 4 screens of plugins - and I want to see my plugins which are 1 screen down the initial today screen, I have to tap all the way down and then tap up 2 times to see the plugins I should have seen tapping just 1 time).
This is so annoying. I would appreciate any help. Thanks.
shogunmark said:
in the home customizer go to the "options" tab and check "Lock plugin on the today screen" ... this will solve your problem!
Click to expand...
Click to collapse
Hi:
This one didn't for me. The direct registry tweak did. Thanks to all you guys! xda rocks!!
shogunmark said:
in the home customizer go to the "options" tab and check "Lock plugin on the today screen" ... this will solve your problem!
Click to expand...
Click to collapse
Hi:
This didn't do it for me. The direct registry tweak did. Thanks to all you guys! xda rocks!!
This is for mbernstein:
You hijacked the thread but since the op had his issue resolved I can offer you just a little input. I had the same problem you mention. It started after I installed a few SPB programs. I'm not sure if it was the Pocket Plus, Mobile Shell, or something else but it was definately an SPB proggie. Once I uninstalled the programs the issue went away. I'm disappointed because they are good softwares.
Thanks. This should be the case. But it is a shame as Spb softs are quite good (otherwise).
Yes, I unchecked SPB today plugins and it took a long time (right one) for the screen to go "home". thanks.
Hi all,
I was wondering if and how you would go about changing the scrolling speed when using your finger...
E.g. If I open anything with a vertical scroll bar (say SMS inbox, file explorer etc), a slight flick of the screen would scroll down (or up) far too quick.
It used to be perfect on my Hermes device as standard.
I'm using Dutty's ROM on my Diamond.
Anywhere that I can change this?
Thanks.
Yes, i would like to know this too. I keep flicking up and down, or accidentally 'clicking an item' which is a pain..
Yeah, accidentally click on an item is also an issue for me (but apparently not for many others!)
Accidental click
Hi,
I'm having the same problem too...
There are some tweaks in the following thread:
http://forum.xda-developers.com/showthread.php?t=398265
Also, try the Advanced Config tool... It has some options too.
But with all these, although there is a slight improvement in usability, still the experiance is not as good as the iphone.
More than the scroll speed, the accidental click is a real pain...
Especially in scenarios like: Programs --> Add program and Weather Application --> Add city
Is there any better fix available... pls help.
+1 for me too. This is really really annoying, and actually I don't think anything in the Advanced Config tool makes the slightest bit of difference to this setting. I set 'scrolling' to disabled under TouchFlo settings of Advanced Config too, but I can still scroll and it's still exactly the same as before.
any ideas about this? i just flashed my rom to dutty's 3.4 (originally a 3.2) and in resco explorer, the scrolling was almost as smooth as an iphone but now it's too fast and sometime non-responsive. anyone know what setting can change this?
This worked for me.
Hi guys,
I was just installing the new Manila Controller add on, which comes with FTouchFlo (SL). With the FTouchFlo enabled, scrolling is back to how it should be for me
Where did you find the Manilla Controller app?
sh500 said:
Hi guys,
I was just installing the new Manila Controller add on, which comes with FTouchFlo (SL). With the FTouchFlo enabled, scrolling is back to how it should be for me
Click to expand...
Click to collapse
Yes. Where did you get the Manila app? I was searching for a way to only allow upon double click, but could not find anything in the settings.
It's the FTouchFlo that does the deal. The mentioned Manila Controller just encorporates a version of FTouchFlo to enable the upslide activation.
axelpix said:
It's the FTouchFlo that does the deal. The mentioned Manila Controller just encorporates a version of FTouchFlo to enable the upslide activation.
Click to expand...
Click to collapse
Yep that's right, just do a search on FTouchFlo (renamed to FTouchSL?)
Been there, got the t-shirt. FTouchFlo (the old, free version) runs and doesn't do much. Scrolling in native WM windows is still messed up.
Just flashed to latest ROM from Dutty and first thing I installed was FTouchFlo (via Manilla controller). Didn't test the scrolling before, but now, again every menu (native or otherwise) seems to be 'scrollable' for me.
Any other success stories with FTouchFlo? I installed and activated it, but it didn't do much.
I have used this setting to calm this finger flicking crazyness down:
HKLM\Software\OEM\TFLOSettings:
SpeedHigh: default value (25) <-- Change to (5) / SpeedLow : default value (70) <-- Chnge to (14) save and soft reset
Many custom ROMs are including the 5 and 14 setting respectively this makes it crazy fast when flicking with the finger. I suggest using default settings here or, in my case I use 25 for SpeedHigh and 50 for SpeedLow, wich does improve scrolling over default when using the finger but keeps the finger flick toned down. BTW, I've noticed that when flicking witht the finger the first flick engages SpeedLow and a second flick switches to SpeedHigh.
Ok, first to the admins/moderators - I searched my ass off trying to find a thread with my problem, to no avail... so if there is one, please excuse me...
So here is my problem - I find it very difficult to scroll any list with my finger because I just end up selecting some item from the list... Is there any registry setting to, lets say, delay the select behavior of TouchFlo? I mean, for example, I try scrolling my contacts, I AM able to scroll but almost immediately after I start scrolling I end up selecting some contact!?! Am I the only one with that problem? PLEASE HELP!
Bump. Anyone?
I just have the problem the other way around, I just can't select multiple items because everything starts scrolling...
try scrolling with finger in more center of screen
selecting works if you scroll motion on left or right side usually
joshkoss said:
try scrolling with finger in more center of screen
selecting works if you scroll motion on left or right side usually
Click to expand...
Click to collapse
Also , make it more of a " flick " with your finger, instead of a touch and drag scroll.
So there's no registry setting? I have tried changing settings in HKLM\Software\OEM\TFLOSettings, HKLM\Software\HTC\HTCGesture, HKLM\Drivers\Touchpanel, HKLM\Software\HTC\TouchScroll... can't seem to make any difference!!! The screen becomes more responsive, scrolling is faster/slower, but no effect on my problem - whenever I try to scroll I always end up selecting... there HAS to be some setting that determines the delay from scrolling to selecting behavior... it works so well on the damn iPhone... also works beautifully on the S2U2 settings screen... they should fire all the idiots at HTC and hire the S2U2 guys to do their interface!!!
mmmfff said:
So there's no registry setting? I have tried changing settings in HKLM\Software\OEM\TFLOSettings, HKLM\Software\HTC\HTCGesture, HKLM\Drivers\Touchpanel, HKLM\Software\HTC\TouchScroll... can't seem to make any difference!!! The screen becomes more responsive, scrolling is faster/slower, but no effect on my problem - whenever I try to scroll I always end up selecting... there HAS to be some setting that determines the delay from scrolling to selecting behavior... it works so well on the damn iPhone... also works beautifully on the S2U2 settings screen... they should fire all the idiots at HTC and hire the S2U2 guys to do their interface!!!
Click to expand...
Click to collapse
u should blow up their forums then
Oh well, I guess I'll just wait till some genius dev out there finds out the right registry key, I give up
I hate to say this, but I think that is the expected behavior or TouchFlo scrolling.
You can drag to scroll specifically (and I don't believe this selects anything, at least on my Tilt), or you can swipe to start kinetic scrolling. If you click while kinetic scrolling is occurring, I think TouchFlo causes a selection to be made (although in places where single-click activate is the default, I don't think it actually activates the item--it simply highlights it).
You may be able to resolve this by changing the TFLOSettings\FingerPressure value.
I had a problem for the first six months with TouchFlo where the context menu would pop up about one in three times I tried to scroll (swiping or dragging). This happened even the moment I started using the device. Completely and utterly unusable. But after the third or so time I tried adjusting TFLOSettings values in the registry, I finally solved the problem. I ended up with TFLOSettings\FingerPressure=0x64 (100) and TouchPanel\PressureThreshold=0xC8 (200).
I REALLY wish HTC or someone would produce a complete guide to customizing TouchFlo scrolling (including the meanings of the TFLOSETTINGS values). It really works well, once it is optimized. Although, it will be great if Microsoft builds scrolling into the Common Controls in WM6.5.
mmmfff said:
Oh well, I guess I'll just wait till some genius dev out there finds out the right registry key, I give up
Click to expand...
Click to collapse
Actually there are genius developers in here. I think you're just being a little picky, the touch flo works fine for me.
I think I recall a touchflo sensitivity setting in KaiserTweak. Get it, then try setting the Touchflo sensitivity to the most sensitive option possible.
Dave
+1 on Kaisertweek, altho I reduced sensitivity instead of increasing it. Technique counts too. I tend to use nails or stylus for browsers, especially Opera. Use keyboard for contacts, and scrollwheel to dial it from there. Every phone is different, but reducing sensitivity via Kaisertweek worked for me.
Problem solved
Finally figured it out and now it works perfectly. The culprit was the too high value in HKLM\Drivers\Touchpanel\PressureThreshold.... I put a value of 160 (dword:000000a0) and now I have almost iPhone experience
heres a thread closer !
to bring some closure to this thread, the following utility will solve all your touchflo woes!!!
http://forum.xda-developers.com/showthread.php?t=499837
my d2 touchcreen seem;s to need more power instead of my brother's iphone 3g screen...can i make my d2 screen feels the same?????thanks
the D2 is a resistive touch screen, iphone is capacitive, capacitive ill always be more sensative, but, resistive is cheaper and more tried tech, and you can use with gloves or styleus etc lol.
aka
no, not really.
but you can use advanced config 3.3 to change the respsonse behaviour, the pressure to use the touchscreen etc
You can also adjust the screen sensitivity etc. using Diamond Tweak (Diamond Tweak 0.5.3_English.cab)....this app works well on the D2.
Change the following reg. keys:
RegWriteDWord("HKLM","\Software\OEM\TFLOSettings\","FingerPressure",-1)
RegWriteDWord("HKLM","\Drivers\TouchPanel\", "PressureThreshold",-1)
RegWriteDWord("HKLM","\Software\OEM\TFLOSettings\","FingerPressure",-1)
RegWriteDWord("HKLM","\Drivers\TouchPanel\", "PressureThreshold",-1)
cyron_at said:
RegWriteDWord("HKLM","\Software\OEM\TFLOSettings\","FingerPressure",-1)
RegWriteDWord("HKLM","\Drivers\TouchPanel\", "PressureThreshold",-1)
Click to expand...
Click to collapse
Can't find this one-- "FingerPressure"
Do you mean changing the "PressureThreshold" value to -1?
Thanks
cyruslam said:
Can't find this one-- "FingerPressure"
Do you mean changing the "PressureThreshold" value to -1?
Thanks
Click to expand...
Click to collapse
..here the complete thread:
http://forum.xda-developers.com/showthread.php?t=469865&highlight=FingerPressure
HKEY_LOCAL_MACHINE\Drivers\TouchPanel, item DWORD PressureThreshold, set up value 000000f0 (original 00000027).
what is hkey_local....where is this??i can find it anywhere...??help....
You will need some registry editor. Such as this one
I just got my D2 yesterday.
One problem I have is that, when I am scrolling up/down the screen which contains multiple entries (such as the Setting's page or All contacts), when I swipe my finger or stylus across the screen, one entry is frequenctly selected as a result of the swipe gesture.
Is there a way to change to double tap to select an entry, or otherwise 'strengthen' the sense its a swipe not a tap?
Connor.McLeod said:
I just got my D2 yesterday.
One problem I have is that, when I am scrolling up/down the screen which contains multiple entries (such as the Setting's page or All contacts), when I swipe my finger or stylus across the screen, one entry is frequenctly selected as a result of the swipe gesture.
Is there a way to change to double tap to select an entry, or otherwise 'strengthen' the sense its a swipe not a tap?
Click to expand...
Click to collapse
Found out in the contact manager, if I swipe and hold my stylus on the screen briefly after swiping , the entry is not selected.
Will do the same with the other applications. Hopefully the same trick works.