Hi i tried to update the Hermers, but the update stopped at 99%.
I tried to do the recovery prcedure and it worked fine, but the update stops at 99% every time. Can someone help me with this (not my own Hermes)
mickelpijpers said:
Hi i tried to update the Hermers, but the update stopped at 99%.
I tried to do the recovery prcedure and it worked fine, but the update stops at 99% every time. Can someone help me with this (not my own Hermes)
Click to expand...
Click to collapse
Yes. Go to the Hermes section
Related
my hd7 works fine but every 10-20mins of using it reboots and stucks. i must pull out battery several times and then it will start... i did try to replace software but it keep displaying error on 6% error name is: ERROR [226] FLASH WRITE
i did also try 2-3 more but same problem every time
i used this software last but same problem also with this one...
http://forum.xda-developers.com/showthread.php?t=1268171
plz help meee... i cant figure it out and fix it...
Kenannp said:
my hd7 works fine but every 10-20mins of using it reboots and stucks. i must pull out battery several times and then it will start... i did try to replace software but it keep displaying error on 6% error name is: ERROR [226] FLASH WRITE
i did also try 2-3 more but same problem every time
i used this software last but same problem also with this one...
http://forum.xda-developers.com/showthread.php?t=1268171
plz help meee... i cant figure it out and fix it...
Click to expand...
Click to collapse
Have you tried a different radio with said rom?
Have you tried other roms? I havent tried the TouchIt rom yet. Im running DeepShining Mango anf it works just fine. What program are you using to flash the rom?
Swapout memory...
My HTC HUB wasnt working. I deleted it and tried to reinstall, but marketplace says - cant get info, check back later. And I dont have a XAP file
FTP4 said:
My HTC HUB wasnt working. I deleted it and tried to reinstall, but marketplace says - cant get info, check back later. And I dont have a XAP file
Click to expand...
Click to collapse
HTC Hub can only be downloaded over WiFi.
I got newest version of it. Now it sucks and Im going for Android or Mango ROM
Kenannp said:
my hd7 works fine but every 10-20mins of using it reboots and stucks. i must pull out battery several times and then it will start... i did try to replace software but it keep displaying error on 6% error name is: ERROR [226] FLASH WRITE
i did also try 2-3 more but same problem every time
i used this software last but same problem also with this one...
http://forum.xda-developers.com/showthread.php?t=1268171
plz help meee... i cant figure it out and fix it...
Click to expand...
Click to collapse
dont want to be a pessimist but it happens to me too and i need to send it for repair. i hope you have more luck...
Hi!
I have the HTC One, and the update for Android 4.4 is now available for my phone (yay!). The only problem is the update is not working. When I try downloading it, all it says is that the update is broken.
Please help!
Nilossiell said:
Hi!
I have the HTC One, and the update for Android 4.4 is now available for my phone (yay!). The only problem is the update is not working. When I try downloading it, all it says is that the update is broken.
Please help!
Click to expand...
Click to collapse
have you tried to download it again?
alray said:
have you tried to download it again?
Click to expand...
Click to collapse
Yes, many times.. Turned the phone off and on again, tried a different wifi, but nothing helps..
Q&A for Manual OTA Update - NO ROOT
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Manual OTA Update - NO ROOT. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
So, I got to the update.zip part but I couldn't push the update as it couldn't find my adb device. Now its stuck on the adb push screen on the device and holding down the button causes it to vibrate and do nothing. Any help please?
angelzarke said:
So, I got to the update.zip part but I couldn't push the update as it couldn't find my adb device. Now its stuck on the adb push screen on the device and holding down the button causes it to vibrate and do nothing. Any help please?
Click to expand...
Click to collapse
Hold the button longer. When you hold it, it will vibrate for 2 seconds, keep holding it and it will turn off.
Problem with sideload at 63%
Hello, I have downloaded more than 3 times the update and it always halts at 63% and the last line says Total xfer: 1.34x
I have the 5.0.1 recovery, also have unlocked bootloader, tried the adb in other computer and stoped at 63% too.
I am running Build KIW52H version 4.4W.1
I think all the drivers from adb and fastboot are ok, since my other devices can use them with sucess.
Please help me Thank you
RubeyMoka said:
Hello, I have downloaded more than 3 times the update and it always halts at 63% and the last line says Total xfer: 1.34x
I have the 5.0.1 recovery, also have unlocked bootloader, tried the adb in other computer and stoped at 63% too.
I am running Build KIW52H version 4.4W.1
I think all the drivers from adb and fastboot are ok, since my other devices can use them with sucess.
Please help me Thank you
Click to expand...
Click to collapse
It's because you did not update your bootloader.
Bootloader 5.01
Code:
adb reboot bootloader
fastboot flash boot bootll.img
Now you can sideload the update.
Still the same error
Hello, I still have the same problem please help
RubeyMoka said:
Hello, I have downloaded more than 3 times the update and it always halts at 63% and the last line says Total xfer: 1.34x
I have the 5.0.1 recovery, also have unlocked bootloader, tried the adb in other computer and stoped at 63% too.
I am running Build KIW52H version 4.4W.1
I think all the drivers from adb and fastboot are ok, since my other devices can use them with sucess.
Please help me Thank you
Click to expand...
Click to collapse
That's because you're on 4.4W.1. The downloaded update provided here is only for 4.4W.2. This is not a full update so you need to have that version before you can update to 5.0.1.
intersectRaven said:
That's because you're on 4.4W.1. The downloaded update provided here is only for 4.4W.2. This is not a full update so you need to have that version before you can update to 5.0.1.
Click to expand...
Click to collapse
How can I update from 4.4W1 to 4.4W2? Because In my country, there is still no updates available. Bought my G watch r from ebay
I found a 4.4W2 file in the forum but don't know how to install it. Can you please give me a small tutorial? I appreciate it
Stuck in adb sideload
Hello everyone,
I worked through the process without any major problems until trying to sideload the update.
Now I'm stuck in the sideload-screen displaying "Verifying update package..." Nothing happened for the last 30 minutes.
The CMD shows:
serving: '149e0c34d0ab10d3e356d6301915dcc04552d9db.signed-lenok-LWX48P-from-KNX01R.149e0c34.zip' (~0%)
Bootloader: unlocked
Recovery: 5.01 (flashed)
Software-Version 4.4W.2
Build-Number: KNX01R
ADB-Debugging: active
Does anyone have an idea what went wrong?
Thank you!
I have got the OTA after I have resetted my watch and chosen the country for the watch was made. The watch is from France and I use it in Germany. So after changing to France I have got the update.
my watch is always on v 4.4.w.1
bouuuuu
it wan't to update................
Good advice.
I just followed your lead and reseted my watch. I'm currently downloading my update too.
Thanks for sharing your solution.
Did that several times, doesn't work.
Devray said:
I have got the OTA after I have resetted my watch and chosen the country for the watch was made. The watch is from France and I use it in Germany. So after changing to France I have got the update.
Click to expand...
Click to collapse
Thanks I also got it from France and followed your instructions. It's downloading now
FloW_Hamburg said:
I just followed your lead and reseted my watch. I'm currently downloading my update too.
Thanks for sharing your solution.
Click to expand...
Click to collapse
mihnutzu said:
Thanks I also got it from France and followed your instructions. It's downloading now
Click to expand...
Click to collapse
Nice too hear that it even worked for you both. Let me guess that you bought it even from Amazon.fr like me.
Sent from my A0001 using XDA Free mobile app
anyone have a link to the 4.4W.2 update? I tried to do 5.1 on 4.1 and now i'm stuck... any help would be great
Error
If i want to Upgrade my Lg g watch r then everything is good but my watch is still on 4.4W.1 i dont know why it is so can anyone post all things i need to download for the upgrade??
Sorry for my Bad English
Problem
Hey everyone i have a problem .
everything worked fine till i do adb sideload ...
it goes up to 60 % but than it ends and if i reboot the watch its still on 4.4w.1 anyone know why ??
FIXED
osnapitzpacho said:
Hi! I want to downgrade to EMUI 3.0! I put the B133SP01 update app in dload (I created it because there wasnt one) and do local upgrade. It says fail. Please tell me how to downgrade without rooting or something.. Sorry for my n00b question.
Click to expand...
Click to collapse
man there's been at least 6 procedures /threads made to do this..
SEARCH please.
thnx
I have another problem now. I found this thread http://forum.xda-developers.com/ascend-p7/general/how-to-downgrade-emui-b609-to-b602-t3009149/page2 and there was a file called ROLLBACK133SP01, installed it and now theres a little window which says Unfortunately, andorid.process.acore stopped working. PLEASE HELP!!! I can't get rid of it. It keeps popping please HELP ME
EDIT: Factory reset fixed everythink.
osnapitzpacho said:
I have another problem now. I found this thread http://forum.xda-developers.com/ascend-p7/general/how-to-downgrade-emui-b609-to-b602-t3009149/page2 and there was a file called ROLLBACK133SP01, installed it and now theres a little window which says Unfortunately, andorid.process.acore stopped working. PLEASE HELP!!! I can't get rid of it. It keeps popping please HELP ME
EDIT: Factory reset fixed everythink.
Click to expand...
Click to collapse
yes I always say ppl factory reset..
Hello everyone. First of all, sorry for the long post.
I just bought a OnePlus 3t three days back. Updated it to oxygen 4.1.3 and then rooted it as well. Everything was working fine. But then I decided to downgrade to 3.5.4 since I wanted to try out Xposed Framework. So I downloaded the OS from OP Support website, and went to twrp recovery and installed the os 3.5.4 from the internal memory of the phone. It seemed to install properly but when I rebooted the phone, it started asking for a password. I tried every possible combinations of my passwords but to no avail. I saw online and found some video where I was supposed to flash a new recovery which I did. After that the phone got stuck in Bootloader. There is no bootloader and recovery version detail available on this screen.
If I try to restart the phone it gives me the following error, "Decryption Unsuccessful - Your phone storage has been damaged, unable to read data stored in your phone! To continue to use the phone, you need to reset the phone." There's a button at the bottom of the screen to Reset Phone. When I click that the phone goes back to bootloader mode.
Please help me out here. I have no clue what to do right now. I have tried flashing several recoveries but they give an error "cannot determine the image filename for abcd.img"
Any and all suggestions are welcome. Thanks in anticipation.
Bro looks like a brick device did you check this post?
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
maybe you can find the answer there, hope you can manage to fix the problem :good:
Crash said:
Bro looks like a brick device did you check this post?
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
maybe you can find the answer there, hope you can manage to fix the problem :good:
Click to expand...
Click to collapse
Thank you for the reply. I haven't yet tried it, since the computer recognises the phone just fine. It even shows up in the fastboot devices list in cmd. Maybe, I should give it a go.
Crash said:
Bro looks like a brick device did you check this post?
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
maybe you can find the answer there, hope you can manage to fix the problem :good:
Click to expand...
Click to collapse
Ok so I did manage to reinstall twrp. But I have no idea what to do next. Any suggestions ?
I managed to fix it. After the twrp recovery was installed, it started asking me for a password. Which I tried and didn't work. But then I just wiped the phone and it went back to factory settings somehow.
Now the phone is back to oxygen 3.5.4 and works fine.
Hope this can be helpful to someone else.
I'm glad u fixed it
Can u please post the correct steps to avoid this issue in the first place .
I'm on 3.5.4 but I may want to try latest versions and come back to 3.5.4