He do you know any solution that would make that possible. I tried wm5storage and card export II and they didn't work for me, any help appreciated
hanza said:
He do you know any solution that would make that possible. I tried wm5storage and card export II and they didn't work for me, any help appreciated
Click to expand...
Click to collapse
I have had no luck either. Anybody else?
I was hoping the Kaiser would have sorted this, i can plug my K800 into any computer and it see's it as removeable storage if it doesnt have the SE drivers. Would really like the same thing for this.
Does someone have a fix for this tool or is there an other application which does has the same functionality?
actually, there is a version of wm5storage that works with teh kaiser, i remember reading about it on modaco. read thru the thread toward the end i believe..
I tought that Softick Card Export II 3.05 works fine with Kaiser:
http://forum.xda-developers.com/showthread.php?t=332916&highlight=softick
Related
I tried many different versions of wm5torage on my wings, and I can't get one to work I was wondering if it was working for you, S730 owners?
I tried with a 1GB microSD, and a 8GB SDHC with no success at all...even Softick Card Export trial can't give me access to my card
XP recognizes a USB peripheral in the tray, I can even see a removable drive with a letter ( G: ) , but my data isn't there (it's empty) and I can't write on it
I would be glad if someone could help me out...
Tried on mine, I have windows Vista and its working for Me, all directories and files are accesible for Me. I can make a new directory on the card.
Thank you for trying ! I guess the only thing I can do now is a hard reset of my device..... It was very tweaked to save RAM
EDIT:: I really can't get it to work Please, which version of wm5torage did you use ?
I'd also like to get WM5torage working on the S730 with WM6.1. I'm trying v1.80. A Removable Disk (G appears in Vista but if I click it I get an error message saying that it needs to be formatted.
So what's the secret mykie?
You know, I think mykie has a T-Mobile Wing and not an HTC Wings.
The Wings has a bad USB driver that can't properly be used by WM5torage, if I understood it correctly.
On the Kaiser (which has the same chipset as the Wings and surely the same drivers), they managed to make wm5torage work by installing Softick CardExport too (which installs his own USB driver, that wm5torage can use afterwards).
I couldn't reproduce it on the Wings with the SP version of CardExport
I have the same problem. Did you find a solution?
WMStorage WORKING
You must cancel at setup->connection->USB to PC
Enabled advanced network functionality.
Do you know anybody, what means allow it?
frem, I did not find a solution to this problem yet. I'm using an USB stick where you can put your sdcard in.
jivo, it's the wingS we're speaking about.
I won't think wm5torage works for anything anymore :-/ At least on my kaiser it fails all of the time. I just plugged it into a Vista machine and I love how easy it is to just access the storage card. Vista would get rid of any desire for WM5torage other than the fact that everyone doesn't run Vista.
jivo said:
You must cancel at setup->connection->USB to PC
Enabled advanced network functionality.
Do you know anybody, what means allow it?
Click to expand...
Click to collapse
It's worked before hw service (new displey) and before flash to 6.1. WMStorage working at my Mteor WM6.1. I don;t know where is problem at Wings. I am sorry.
I have this problem now too. I am use WMStorage 1.8
setting it as usb mode so transfer rates can be faster than activesync...i have an 8gb microsdhc and my memory card reader isnt working with this type...anyway to get into USB mode so i can transfer files faster?
thanks!
I use a program called Softick Card Export II .. Its not free but it works great ..
http://www.softick.com/pocket-pc/cardexport2/
Also try WM5Storage same like CARD EXPORT II but free ware....
max621 said:
Also try WM5Storage same like CARD EXPORT II but free ware....
Click to expand...
Click to collapse
As far as I knew (unless this has changed recently) WM5Storage wont work with the Kaiser unless you have the trial version of Softkick card Export installed.
And personally, after trying both, Softkick is so user friendly against the confusing WM5Storage menu, a small cost means nothing...
have yall gotten either one to work with MicroSDHC cards? I installed WM5torage..one that works for the kaiser and yet i still cant get the drive to open..my whole 'my computer' screen freezes until i unplug the USB cable..
I have an 8GB microSDHC card and its working flawless with Softicks Card Export II software.
Can't comment on the WM5storage. I got rid of it when I purchased Softicks as its much better.
I'm sure this has probably come up before but I just can't find a relevant thread, so:
On my last device (Mio a701), you could switch it to 'card reader' mode and it just acted as a USB card reader and didn't fire up active sync when you connect it. Can this be done with the Kaiser?
TIA
you are probably thinking of wm5storage. however, wm5storage doesnt work with the kaiser......it needs a little trick to get it to work, search the forums for it.
murf62 said:
I'm sure this has probably come up before but I just can't find a relevant thread, so:
On my last device (Mio a701), you could switch it to 'card reader' mode and it just acted as a USB card reader and didn't fire up active sync when you connect it. Can this be done with the Kaiser?
TIA
Click to expand...
Click to collapse
Look at Softick's Card Export
This is a commercial product, but I found it more reliable than WM5storage
Actually WM5Storage does work, but it needs a few of the better USB drivers from CE2.
You can install CE2 trial & the free WM5Storage and the the WM5STorage will work. (even when the CE2 trial period ends) This is a little fix for the cheapskates of the world
I myself use card export2.
Many thanks for the replies, I will give Card Export a go.
The Mio one was a part of the Mio Utility that came pre installed. It's the only thing I have missed after upgrading to the Kaiser.
As you might probably knew already, Windows Mobile 6.1 is having problem with USB mass storage emulation software like SoftTick CardExport or WM5Storage.
If you have SofTick CardExport, please report it here :
http://softick-forum.com/viewtopic.php?t=1498
Because if more people reported there it will get more attention.
And I believe (hope) that it will also benefit the WM5Storage (I still remember that in the olden days, we need to install Softick trial version to make the WM5Storage work).
I upgraded my Kaiser yesterday to official WM6.1 and wasn't aware of this problem yet:
infact I've a x51v WM6.1(LennySH Dell Stock Beta 7) and with Card Export II 3.08 I can explore both SDHC cards from my PC-XP.
So the problem with Card Export II,probably,is linked to Kaiser and not to WM6.1
Just curious, but what problem are you having? I am using Card Export II 3.11 with Dutty's 4/29/08 6.1 rom on my Tilt and all seems to be working fine.
Hi, i have a Problem too. When i activate WM5torage, my windows recognize my sd card as a usb stick, but i can't grab on it. My Windows show me the Message "Its not Card in", But it is a card in. Can one help me.
Tnak you
Card Export fixed !!!!!
http://www.softick.com/pocket-pc/cardexport2/
Its now FIXED!! and works great for wm 6.1 upgrades. My tilt is now whacking across over a gig of photo files without stopping for a pause. USB settings DO NOT need messing with nor do any of the CardExport functions.
Install.....and use as a mass storage device. I did not need to play around with any of the settings either PPC or PC end.
great program. was surprised my tilt didnt come with this..
I've flashed about 10 to 15 WM6.1 ROMs and have used Card Export II successfully in every single ROM. I don't think it's a 6.1 problem.
Cooking CardExort II into a ROM?
I have tried a few times to make an OEM package out of CardExport II but have never managed to get it to work. I installed the Application, copied all the files off and did a registry export. I then searched through the exported registry file and extracted all (I think?) the CardExport II entries and built an OEM package. So I have at the moment an almost working package however when the application is launched and you click connect, ActiveSync disconnects OK, then a few seconds later the big button on the Kaiser turns from Disconnect back to Connect and ActiveSync re-connects.
Has anyone sucessfully made an OEM package of CardExport II to include in a ROM?
Cheers
Andy
nicholasendean said:
http://www.softick.com/pocket-pc/cardexport2/
Its now FIXED!! and works great for wm 6.1 upgrades. My tilt is now whacking across over a gig of photo files without stopping for a pause. USB settings DO NOT need messing with nor do any of the CardExport functions.
Install.....and use as a mass storage device. I did not need to play around with any of the settings either PPC or PC end.
Click to expand...
Click to collapse
and what is a serial number???
hi you have written that cardexport work for you,. I downloaded it from your link and installed but it doesnt work and it needs serial number(with any ROM i have tested so far)...how did you fix it?
thx
peto01 said:
hi you have written that cardexport work for you,. I downloaded it from your link and installed but it doesnt work and it needs serial number(with any ROM i have tested so far)...how did you fix it?
thx
Click to expand...
Click to collapse
You could fix it by sending a few dollars towards the developer. Best 15 bucks I ever spent on windows mobile software.
http://www.softick.com/mobile/pocket-pc/cardexport2/
rob.ocelot said:
You could fix it by sending a few dollars towards the developer. Best 15 bucks I ever spent on windows mobile software.
http://www.softick.com/mobile/pocket-pc/cardexport2/
Click to expand...
Click to collapse
What he said.....
I use Windows mobile 6.1 and it works fine for me. They have the best protection on the software I have seen and I believe it still hasnt been cracked. Most people who have a problem with this software are using a cracked version which doesent stay cracked for very long, it then stops working in many different ways IE on the website's FAQ
Q: My Card Export II works fine but sometimes it says that "Wrong usb status returned by underlying driver". How can I fix this?
A: Just do not use cracked or patched versions. If you like Card Export II, consider purchasing it. Card Export II costs only $14.95. After receiving unlock code, remove your patched version from your handheld and install fresh version from our web site. After that register it using unlock code you have received from Softick.
Best app on my phone....
Hello,
my problem is at wm5torage:
when I start a java application it doesn´t work. It comes the error:
"Cant´t switch to Mass Storage USB driver, error 1f. Maybe some programs or plugins run from or have files open on storage card...."
But I have no contact at this time to the SD-Card.
Card Export works at the same place. But it isn´t free, so I try to use WM5torage, because it is free.
Can anybody help me with this problem?
Thank you
Best regards
Mathias Kant
Use Athena as Usb mass storage?
like my O2 Zinc or athena the sofware name : usb setting or
have software for this n working in Kaiser:confused..?
You're confused!
Yes, I do all the time. Card Export does the trick to turn your phone into a card reader.
GWelker62 said:
Yes, I do all the time. Card Export does the trick to turn your phone into a card reader.
Click to expand...
Click to collapse
really nice app!! great .. no need for a card reader anymore!!
its just reeeal slow
amkaos said:
its just reeeal slow
Click to expand...
Click to collapse
Yes, slower than a normal card reader, but 10 times faster than ActiveStink.
But calculate the time it takes to power your phone down, remove the card, stick it in a normal card reader, transfer files as needed, put it back in the phone, power back up.
With Card Export, I click on an app button and plug into my pooter.
Some of us are even geeky enough to have the flash card bootable.
Mine loads BartPE, and has all of the Windows XP Source files on it, so I can now boot any system, perform maintenance on it using the BartPE image and utilities, and even reinstall Windows XP Pro from my phone.
I do IT work for a living.
Synssins... thats way to much information...
btw look up wm5torage... same thing as card export but freeware!
fone_fanatic said:
Synssins... thats way to much information...
btw look up wm5torage... same thing as card export but freeware!
Click to expand...
Click to collapse
wm5torage won't work on a Kaiser/Tilt, the last time I checked.
fone_fanatic said:
Synssins... thats way to much information...
btw look up wm5torage... same thing as card export but freeware!
Click to expand...
Click to collapse
Too much information, as in, irrelevant to the thread? Or too much information, as in "Whoah Nellie! You ARE a geek, and it blows my mind!"
In short, to answer the OP's initial question.
YES. You can use the HTC Kaiser/AT&T Tilt/Orange/anything else it is sold under, as a USB flash drive for a PC, by using a program that you install on the phone.
WM5Storage does not work for me. It will not load the card as usable. I ended up using CardExport, and paid for it. I love it.
thanks... sorry because i m new bie..
Code
The card export needs a code to funtion properly is that version cracked?
Superboog said:
The card export needs a code to funtion properly is that version cracked?
Click to expand...
Click to collapse
Card Export is payware. It is worth the money, for as often as I use it. No crack.
They just require that you have an Owner Name set on your device. The Owner Name has to match the name used to register it to receive a key.
Card export installs a universal usb driver that it installs to your device and utilizes. I use it and it works on every machine I've tried it on. It's a very good program and worth paying for.
wm5torage is similar software but does not include a driver... either you have it or you don't (hence it sometimes doesn't work)
warez, I hear warez!!!