Related
OK, I have been waiting to play Monkey Island 1 again for a very long time, and that dream has been semi-realized now that ScummVM is in the Market. I have the (I think) correct data files on my sd card. The only problem is when I choose Add Game it takes me to a directory listing that won't let me scroll up and down and when I select a directory it dumps out of the program.
Is it just buggy right now, or am I doing something wrong?
i dont know, i have installed scummvm in my phone and i only have problems with LOOM.
this version have a problem, with this phone we dont have a stylus and the bottons from the scroll are small.
I know this sounds very dum but if you head over to the scrummvVM site and check out the list of data files that are needed for each game that will probly help, you could also double check the compatibility.
http://www.scummvm.org/compatibility.php
Took me a while but to my suprise i got broken sword working, was very happy. Only downside to these games is that they require rather precise clicking....there are specifial stylus you can purchase for the G1 im looking into
Sorry, I replied to the message i got on my G1 thinking it would reply here but I guess not. I just wanted to say that I was wrong and it does work. the problem I was having is that scrolling down to choose the sdcard folder is VERY VERY HARD! You essentially have to keep hammering on the screen for a few minutes until it registers the button press enough times to show the correct folder. It is so difficult to do that it appeared to be locked up when in reality it wasn't. Once you add the game it runs fine!
I tried typing the name and it was much easier to add. It still needs a more accurate pointer though. My fat finger is not cutting it.
I'd agree with the "fat fingers" problems. It's definitely something that would work much better with either a stylus or some sort of trackball mouse pointer.
I've tried Loom, Gobliiins, and Day of the Tentacle. Loom is the only one that freezes on open (after speaking one file). Too bad it's my favorite game. lol
Now all we need is freeSCI for Hero's Quest and I will want nothing more
the navigation menu of scummvm is very slow, but i got monkey island working fine, im already on the island
so ya i love this app!!!!!!
has anyone tried one of the iPhone styli for this?
bommel0815 said:
has anyone tried one of the iPhone styli for this?
Click to expand...
Click to collapse
Bought one from Ebay for around £9. Was very unresponsive and requires hard-pressing to work....It is my understanding that the G1 requires some kind of peripheral so that the screen can recconise it....not heat I think its a tiny electrical charge.
loooooom
I thought maybe i had a bad copy of loom, but everyone seems to have the same problem. Any ideas for a fix?
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage
and your usb is probably whack
@kaiserII...your usb is whack, haha. that **** made me laugh.
having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?
Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!
Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will
same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...
I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.
Any idea how to fix it??
keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry
For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?
oo wow, i have the same problem. hope theres a fix
adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.
Hi guys I've got a HTC Ignito and Id like abit of advice the touch screen on my phone seems to be acting up as u can press on the left hand side and it will detect pressure but only the top and bottom 5mm will work properly the rest it will activate what is on the opposite side or will do nothing.
when Ive tried to calibrate the screen it just constantly repeats the calibration process non stop but if you do a hard reset it will start working properly but as soon as you reset phone it messes up again.
Any one any ideas is the touch screen broken or is it another problem its got the stock rom on it
Sorry for the bad structore of post feeling abit tired as been up for hours annoyed at my phone.
I noticed a simmilliar issue starting a couple of weeks ago. Looks like the X-axis of the digitizer starts to die. In my case it only detects touches in Y direction, but not in X.
So far it only appeared under hot condition like sunlight or constantly running device in craddle. After cooling down it always came back to normal behaviour (so far)
Cheers bud for the reply. Its weird tho as its same as yours as it will detect the Y axis movemnt as when i hadnt hardrest it you could minamise the clock but that was it. Simalar problem happened to my grandads orbit and acted like urs then got progressivly worse over a few months.
I wonder if anybody knows if it would be sortedby getting a new touch screen.
HI...
Hopefully we are not the only ones... But yeah my MDA Compact (Diamond on T-Mobile UK) is doin the same thing. Like you guys, mine has staterd to get worse, before it was just a few edge icons that i could'nt press..but now sometimes pressing the screen anywhere does nothing, all i can do is scroll up or down.
Axelpix... you make a good point about temp...mine gets quite warm when charging on the USB. I will try to see if this is causing the problem.
Any info on fix would be greatly welcomed.
PS i'm running the Windows 6.5 Energy ROM. 14/07/2009
Hi guys least im not alone I think the only way to fix this problem might be to replace the touchscreen im just looking to see how much it would cost to buy a new one and if its easy to just replace the screen or if it comes attached to the lcd screen like on the orbit
continuous request to calibrate the screen
Yes, I have experienced this when i switched the handset on for the first time after purchase but it went off when I forced a restart to the handset.
From what I've been able to find from searching, I think my Tilt is about to bite the dust, but thougth I'd post the symptoms and see if anyone has any good info.
My screen has been occasionally fading to white. Not sure how else to describe it. It just sort of starts getting white, and within 2-3 seconds will be completely white. It is still working, that is, I can place a call (using MS Voice Command); I can play music.
I have SPB Mobile Shell on it, and a button assigned to go to the home screen. I can press that, and it will go to the home screen and display normally. If it is a hardware problem, I find it interesting that I can go back to the main screen. I suspect it is close to gone.
Any thoughts?
If so, anyone know what it costs to repair, and where to do that?
Sounds like a software thing to me, I hate to say it but try a hard reset. Do you have a 6.5 rom?
I've been thinking of doing a hard reset anyway, My memory is about used up. I'm not quite sure why. Probably should get it cleaned up.
No, I'm not on 6.5. I've been reluctant to make the move. I did some rom updates some time ago, and then the person working it decided to stop. I decided to stay with MFGR based roms after that.
ewingr said:
I've been thinking of doing a hard reset anyway, My memory is about used up. I'm not quite sure why. Probably should get it cleaned up.
No, I'm not on 6.5. I've been reluctant to make the move. I did some rom updates some time ago, and then the person working it decided to stop. I decided to stay with MFGR based roms after that.
Click to expand...
Click to collapse
Good thinking.
Likely NOT software but hardware -- could be the screen is going bad, or perhaps just the ribbon cable than connects the screen is broken or not seated properly.
burtcom said:
Likely NOT software but hardware -- could be the screen is going bad, or perhaps just the ribbon cable than connects the screen is broken or not seated properly.
Click to expand...
Click to collapse
So the hardware problem is just scared of the button he has assigned?
I have SPB Mobile Shell on it, and a button assigned to go to the home screen. I can press that, and it will go to the home screen and display normally.
Click to expand...
Click to collapse
Try putting the phone in the bootloader screen and let it sit there, that should let it go around the software.
Erm, yeah -- I guess that wouldn't be indicative of a hardware problem
Well, I am doing the hard reset. So far, no white.
Hmmm...lordy...I have a lot of stuff I try to put on this phone.
I wonder how much memory, both types, I need to keep available.
Don't put anything on the phone that you REALLY REALLY don't need. This is a taste phase and you need the least amount of BS on there.
Well, I've got most of what I need loaded, and have 61MB storage, and 63MB of Program memory free. Much better than before.
But I am still getting the fade to white occasionally.
I'm thinking hardware.
Anyone know if checking the 'ribbon' cable is user capable thing? I don't see it easily. I'll so some searching in the meantime.
Also, any feedback on cost and where for a new screen? Or do I just trash it when it finally goes?
[EDIT]
I am noticing that it particularly does it when I click the Windows (lower left) hard button on the front. I'm thinking it is related to a problem with that button.
Could be when you press that button you are flexing the cable enough to make it lose connection and go white -- this could be good news -- there are instructions scattered in this forum on how to take the phone apart. I'd recommend doing that and makeing sure the cable is firmly seated -- you should also inspect it for cracks.
Hopefully it's just a loose cable and making sure its in all the way will fix it -- if not you'll have to track down a new one.
Thanks. I'll do some searching for those instructions.
In the meantime, I called HTC just to get their thoughts on repair. First thing they told me was to upgrade the rom to the latest which is 3.57.502.2 .
I haven't been following ROM discussions. I need to check that out too. I wish I had seen or thought of that before I just spent a day with the hard reset/reinstall
did this get resolved?
I have the same issue. was it the ribbon cable?
update. I loaded a stock rom, and this appears to have solved the fade to white
Sorry...beeen away a bit.
I have not resolved the issue. It is intermittent, and hasn't happened for a few days now.
I searched and have found some instructions about taking the screen apart, but have not tackled that yet.
In my case I can't imagine changing roms making any difference, as I've had this rom for many months and it is just recently starting this.
I have found new LCD screens for this for ~ $30. I'm wondering if replacing the screen may be an ultimate solution or, if it is possible/likely that it is somethign else hardware related.
Been busy, and don't have the tools yet, so it may be a bit (or when it goes permanenly white forcing action) before I get any further on this.
It is definitely a hardware issue, my wife's tilt did the same thing, then it went permanent white. I first took it all apart looking for a bad ribbon cable or connection because it had taken a few good falls. But that was not it. So I bought a screen for about 30.00 online and shazam that was it!
Thanks for that info. I was thinking of ordering the screen, but concerned it could be something other than the screen (even though logically it would make sense that it is the screen.)
This may be a problem beyond the scope of android, but seeing as I'm running it, I thought I'd try here first.
I've noticed that the lower left hand side of my screen has a "dead spot" where touch is simply not registered. To illustrate, I went to screen calibration's test screen and drew a straight line along the edge of the screen. (See Attachment)
I've tried recalibrating the screen (manually and resetting to default calibration) as well as wiping data and reinstalling the system. Reinstalling the system worked once, but then the problem came back and subsequent reinstalls did not fix the issue.
I'm running Incubus26jc super froyo [RLS 12] on the 15-07-10 340X480 Froyo Kernel.
Anyone else seen anything like this? As far as I can tell, the problem is not getting any worse. Currently, it's only a hindrance when trying to use keys in that region, but I can work around it by switching to and from landscape. It's a bit of a hassle, so I'm hoping someone may be able to shed some light on the situation.
I was sure it was hardware until the system reinstall fixed it, but am now baffled as I can no longer replicate the fix.
I have not tried reinstalling the kernel but will at some point in the next day or so. I'd like to avoid switching back to WM to check if the problem persists, but may have to... we'll see. Doing everything I can to make this phone last until the Incredible month of February when I'm up for an upgrade.
dont know the issue resolution... but i have the same with my touch vogue.. and in the same 'area' apparently as well.
hard for me to hit the 'a' key on my keyboard. hehe
I'm glad to see I'm not the only one... anyone else?
Bottom right corner for me... I was able to calibrate around it but it took a few tries.
Sent from my Full Android on Vogue using XDA App
The sensitivity across my screen was inconsistent some time ago. I found that years of my abuse had taken a tole on the exterior of my phone. It eventually got worse and I bought a new housing (with a new digitizer) on ebay for a reasonable price. If it is hardware then it really isn't that hard to fix if you like taking things apart.
If you're sure that win mo accepts input from that part of the screen then nevermind my post. I would play with a painting app though and investigate the hardware further.
I may be talking a little out my a$$ with this part but.. is it possible that in calibrating your screen the os may change it's settings on how hard you have to press and such also. that may be how you got it working.
In any case, my investment in a hew housing was well worth it considering how modern my old phone has become thanks to the developers here.
gooph said:
I may be talking a little out my a$$ with this part but.. is it possible that in calibrating your screen the os may change it's settings on how hard you have to press and such also. that may be how you got it working.
Click to expand...
Click to collapse
In my case, no - when drawing a straight line down or across the screen, the line starts 'moving' away from the stylus (like the picture in the OP).
Gah... now it's shutting itself off randomly and the dead spot has grown. Not good at all.
Yeah, mine was better for a while then 'slid' again. I ended up swapping the digitizer with my other Vogue and things are back to normal.
Sent from my Full Android on Vogue using XDA App
I have another vogue, but am weary of doing anything like that. How hard was it to get done?
All you need to do is switch the front half of the housing rather than the digitizer itself- it's not hard. There's a teardown guide somewhere in the forum, Google Vogue teardown and it should be at the top.
Sent from my Full Android on Vogue using XDA App
The only thing that worries me is that my spare vogue exists because it was dropped in a muddy puddle. I'm hoping the water damage isn't too bad. Guess we'll just have to see.
it is really annoying
I have the exact same problem and I too thought it was a hardware issue till I saw this Thread. I was ignoring it till two days ago when it started really bugging me. Now, I don't even need to press any button and it automatically gets pressed around the curve and I have a google search box there, so it keeps on searching for eee or sss randomly and started draining my battery. Is there a proper fix for this?
I thought I'd chime in too... I could never seem to calibrate the touchscreen properly in either Android or Debian. Changing the screen resolution (i.e. msmfb scaling) seems to have no effect, whether it's 240x320 or 640x480. Any area within 5mm or so of the edges of the LCD will register as the edge, making "A" and several other keys on the virtual keyboard impossible to hit. Passing calibration values to the kernel didn't seem to fix anything, but it's possible I was using them the wrong way...
i have the same kind of problem on my Kaiser... i think its realted to hardware... either the housing or the digitizer...
I am experiencing the same problem on X10 mini pro. the same screen spot exactly, i have to try very hard to get z or x or shift to work. Sometimes when I try locking the screen and unlocking it back, it works.
update
so after a very long time with this problem i decided to change the digitizer and problem is gonne. visualy the broken digitizer had nothing wrong with it. The fix was fairly easy though, there is no glued parts involved into getting a new digitizer on the u20i.
Touch Screen
I just bought a brand new Cubot One and it looks more than perfect! It has just a little problem with the touch screen ( I think its the software, need ROM change). There is a dead line on the right side of the screen that touch doesn't work at all. Any solutions? Anyone faced that before? Can I fix it myself or do I have to send it back for replacement? Is there any video or guide that shows its done?
I uploaded a video on YouTube to show the problem but i cant post it yet.. (new member)
You can write "Cubot One touch screen problem" and it's the 1st one.
Thank You!