Related
I'm holding Wizard as followings:
ROm version :1.8.10.2WWE
Radio Version :01.09.10
ExtROM Version : 1.8.10.104
How can i update the version for my PDA. Anybody help out how to my pda updation.
Thanks in advance..
sivaram101 said:
I'm holding Wizard as followings:
ROm version :1.8.10.2WWE
Radio Version :01.09.10
ExtROM Version : 1.8.10.104
How can i update the version for my PDA. Anybody help out how to my pda updation.
Thanks in advance..
Click to expand...
Click to collapse
hi
post IPL/SPL... ? of ur wizard in order to determine which wizard is it G3 or G4,cuz upgrading procedure is different for both.
T-Mobile MDA Compact III Issue
Sorry to tag this thread, couldnt figure out how to create a new one
I have a MDA Compact III issue when trying to upgrade to the ARTEMIS TOUCH 2.1 or 2.0 software
Unfortunatly, my pda was at 49% charge when i first tried, so stage one got to the end, then told me to charge my fone more and ended.
Thus i charge the fone to 75% and re-started. However, upon reconnecting the fone to commence the restart, the USB device was not recognised.
After removing the Active Sync and indeed the USB Driver from the PC and re-installing it, the conenction was re-established, however, it now often drops the connection. Plugging away, i tried the install Step 1 once more, and upon getting to 100% in the cmd part, and then progressing through the wizard, whereby the PDA displayed the progress bar reachinbg 100% (of the unlock stage) the PDA then reboots, and the connection is lost...and doesnt re-establish itself....and then the wizard reports Error [270] : Update Error The image file is corrupted. Please check your update Utility
Now, i have tried various sources for the software, and indeed tried both 2.0 and 2.1.....
Now i have a PDA that intermittantly drops its USB connection (and needs the USB removed and re-added on the PC) and is now slower than it was, plus never got to step 2 to get the software on iot.....
Can anyone help? Else i have a broken phone so to speak.....
Thanks alot in advance
Paul
your in the wrong forum
try to flash in bootloader mode, and use your official rom first
zabardast_1 said:
hi
post IPL/SPL... ? of ur wizard in order to determine which wizard is it G3 or G4,cuz upgrading procedure is different for both.
Click to expand...
Click to collapse
I'm holding Wizard as followings:
IPL 1.08
SPL 1.08
GSM 1.09.10
OS 1.8.10.2
ROm version :1.8.10.2WWE
Radio Version :01.09.10
ExtROM Version : 1.8.10.104
How can i update the version for my PDA. Anybody help out how to my pda updation.
Thanks in advance..
Hope mine is G3....
Yours is obviously a G3 because G4 don't run OS 1.xx...
Go READ the sticky http://forum.xda-developers.com/showthread.php?t=285435 that has a step-by-step guide for what you want
Don't start new threads without first trying all the options: Read, Search, Wiki, etc..
sivaram101 said:
I'm holding Wizard as followings:
IPL 1.08
SPL 1.08
GSM 1.09.10
OS 1.8.10.2
ROm version :1.8.10.2WWE
Radio Version :01.09.10
ExtROM Version : 1.8.10.104
How can i update the version for my PDA. Anybody help out how to my pda updation.
Thanks in advance..
Hope mine is G3....
Click to expand...
Click to collapse
u got G3 device,to upgrade follow this procedure:-
1. Sim/Cid unlock ur PDA,for this look here for the method :-
http://forum.xda-developers.com/showthread.php?t=285435
2.Flash new wm6 Rom,to flash look in this link for the method:-
http://forum.xda-developers.com/showthread.php?t=298613
or, follow this link for all your answers:-
http://forum.xda-developers.com/forumdisplay.php?s=&daysprune=-1&f=289
good luck
Thanks Guys.. Let me try the same.
Ive downloaded official wm6 sve rom from HTC website. My herlald is stuck on bootloader ipl 1.08 spl 1.08. When i connect to computer usb is shown on the screen bottom ,but when i try to flash the rom ,error 300 invalid update tool is shown.
how can i fix this??
Official rom matching my p4350 is supposed to work,but it doesnt.
please help!!!
Hi there,
I recently had a similar problem as you, what I did was to:
- remove the battery for 5-10secs
- put the battery back
- press and hold the camera button (do not release it)
- press the power on button ( the one at the top of the phone, used for the soft resets)
- The phone will display three different colors and "IPL ...."
- Connect your phone via the USB cable to the computer, Windows XP detects that as a new hardware and installs the USB drivers for it. Pockect PC ...., just accept the driver installation when it warns you that the driver is not signed.
- Past all of that you should now be ready to use the Official ROM file from HTC, run the file, and go through the steps. It should start the ROM upgrade.
Well I hope it helps you as these steps did bring my phone back after a failed ROM upgrade.
Cheers
thanks for your instructions .
i will try and post results
Is your phone CID locked?
Because if so, you have to go to your phone provider and see if they have their own official rom!
I Dont Understand ,if Htc E-club Recognises My Serial Number,and Gives Me The Possibility To Download Sve Rom ,doesnt That Mean That I Should Be Able To Flash That Rom Into The Bricked Herald?
elizag said:
I Dont Understand ,if Htc E-club Recognises My Serial Number,and Gives Me The Possibility To Download Sve Rom ,doesnt That Mean That I Should Be Able To Flash That Rom Into The Bricked Herald?
Click to expand...
Click to collapse
Yes same i also have same problem i get Norway rom from my serial number but giving me invalid update tool
my phone
ipl 1.08.00001
spl 1.08.00001
please help me in that case
thanks in advance
i asked the costumer,the herald was cid unlocked when he bougt it,he flashed succesfully pdaviet ,then he wanted to flash wm6 but after uspl the p435o went into bootloader mode,ive been trying with many flashes with no result,please help!!
I had the same problem, and i did the download again. and it worked. try to download the upgrade again and dont forget to take of the memory card of the device.
I hope this can help you.
After i tried to install a new rom it stuck on 99% when i put my phone on it will only go to the bootloader... what can i do???
kevinalmere said:
After i tried to install a new rom it stuck on 99% when i put my phone on it will only go to the bootloader... what can i do???
Click to expand...
Click to collapse
Always post the data of your your phone,to get help.
secondly you had a bad flash,perhaps your phone is CID locked. Which rom were you trying to flash ?
Now to recover,download the official carrier's rom and flash it while in bootloaders.The phone will start working again in default status,then,Read and understand the unlocking method and the flashing guide,read the stickies carefully and perform the method correctly.
cheers !
i have a t-mobile vario:
ipl 1.06
sp 1.06
i removed the simlock with lockwizb and a tried to put airfawizard rom on it so now i have this tricolord screen en there is nothing i can do.. tried to update i with the original carrier rom but it says update error so in seems it can't see my phone or something but my usb is plugged in i hope i can fix this i only can see this blue green red screen it drives me crazy hope you can help me.....
Help!!!
I have same Problem with TNE-V1.0n_4mb.exe
IPL 3.08
SPL 3.08
kevinalmere said:
i have a t-mobile vario:
ipl 1.06
sp 1.06
i removed the simlock with lockwizb and a tried to put airfawizard rom on it so now i have this tricolord screen en there is nothing i can do.. tried to update i with the original carrier rom but it says update error so in seems it can't see my phone or something but my usb is plugged in i hope i can fix this i only can see this blue green red screen it drives me crazy hope you can help me.....
Click to expand...
Click to collapse
If you can go to boot loader, most likely you will be ok. When you plug in the usb port, does the words in the screen change from serial to USB? Once it changes, then flash your official, and then CID unlock your device (this is different from SIM unlock). Then flash to the ROM you want!!
PS: Go read wiki about how to unlock and flash and understand more about your device. http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
The only thing it does is going to bootloader and when i plug my usb in it say usb but when i try to install my original rom from t-mobile ( a update ) it says it's looking for information on my mda but after a couple of second it's say UPDATE ERROR i use windows vista can that be a problem? and how do i know wich one is the original..?
kevinalmere said:
The only thing it does is going to bootloader and when i plug my usb in it say usb but when i try to install my original rom from t-mobile ( a update ) it says it's looking for information on my mda but after a couple of second it's say UPDATE ERROR i use windows vista can that be a problem? and how do i know wich one is the original..?
Click to expand...
Click to collapse
Vista dont like upgrading and stuff...but there is a work around, search the forum and see if you find it. Or try using XP.
okee problem solved working again
thanks for your help!!!
kevinalmere...
How did you resolve the issue I'm having very simular problems and believe it's my Vista OS causing the problem..
Orange SPV M600 G4
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 4.0.0.0
Sorry should explain my issue incase anyone can help.
I attempted an upgrade to WM6 using an Upgrade .Bat from this site. I was slightly impatiant due to not being able to complete the downgrade first anyway the upgrade frose, after a while I canceled the update and carried out a hard re-set... Since then I'm not able to boot nor connect to my desktop via Active sync (WMDC (Vista))
I've followed every instruction I can find but only to be meet with RUU Errors saying can't connect or file open. I can however acces my Bootloader screen and when connection is made the USB symbol shows on the screen of my phone...
Any help would be greatly recieved......
Hi
I have a cingular hp 6515a . I cannot unlock it.I need an unlock hp 6515 rom image.please help me.
Unlock hp 6515
Thats very easy.
1: Download the (upgrade and unlocked) ROM from HP's website
2: HardReset your phone, but leave it in the first welcome screen (before the align screen and so)
3: Connect the phone to your PC, and wait for the connection to be established.
4: Run the downloaded Upgrade package (from HP), the phone will show a bootloader-screen.
Sometimes, the phone will not accept the upgrade program.
In that case do the following, but nothing else!
1: Disconnect the phone and soft reset it (it will come back into the bootloader)
2: Close the HP-upgrade program with taskmanager on your PC
3: Reconnect the phone to the PC
4: Rerun the HP ROM upgrade program.
Now your phone will show its upgrade status. It will take a while (about 20 minutes or so), but afterwards you will have a clean unlocked 6515.
I did this with several locked phones (especially Vodafone) from international sources.
Above will work fine, on every PC with Active-Sync (in my case 4.5) installed.
I assume, you will have a backup, made by the SIP-backup program on one of your memory cards. You can restore it after you've upgraded your phone
SKU error,, did not work
Unlock HP 6515
Did you use the rom you download here: HP 6515 ROM upgrades ?
I did it again today, but with a soft reset of the 6515 and shutting down the upgrade program with taskmanager. Do NOT Hard-reset the device or reboot your computer! Before restarting the upgrade, the computer has to reconnect to the 6515 although it is in the bootloader mode.
My hw6515 is dead after the upgrade to 1.21
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Has anyone managed to get this to work on a 6515 "A"? When I tried it I got an error message that said something like "Incorrect device SKU". I then decided to try upgrading to 1.20 which went smoothly. However, I still get the same SKU error message when trying to upgrade to 1.21. Is there a way to force it into bootloader mode? Anyone know some trick that I'm missing?
ROM Update 6515
SKU-error means wrong language.....
deivasankar said:
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Click to expand...
Click to collapse
Retry the update, or downgrade to 1.20
I Think Not..............
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
I've done it several times. The HP Roms contains also the RadioROM.
If you just think it cannot done... Why don't you give it try...
Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
What language do you use?
For WWE you wil find v1.21, v1.20, v1.12 and v1.00 here.
SKU ERROR help pls
cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
So how can we solve this problem?
Unlock and language change- this is how it worked for me!
This method worked for for an iPaq hw6515 after many long nights, but may be good as well for others:
Do this only from an Windows XP OS.
Make sure you have up to date ActiveSync from Microsoft!
To Unlock,
Just reflash your iPaq with the THE SAME language from HP official support site: h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=501212&lang=en&cc=us &prodTypeId=215348&prodSeriesId=501209&taskId=1 35
Connect your PDA to the computer and check it is in state connected in ActiveSync.
Download the current language ROM from the provided link, unpack, , and follow the instructions.
This official tool will do everything for you!
When it completes (~30 minutes), your phone will be unlocked.
After that if you need to change the language, follow this instructions:
How to change the language in your iPaq:
Here is the detailed process completed, borrowed from Barr :
1. Download and extract BOTH current and desired ROM language pack from HP site to the computer. Unpack them to different folders.
2. Establishing connection with the computer, copy EnterBL.exe (from desired language ROM folder) to the mydocument folder of the PDA.
3. Run the EnterBL.exe from the PDA. (Now your PDA will go to Bootloader mode).
4. (before executing step 4, prepare for step 5 since step 5 will have to be executed right after step4). From your PC, start updating the current ROM by lunching hpRUU.exe of the current installed language of your PDA.
5. Right after step4, when it will start updating, copy all the data (*.nbf) files of desired/intendedlanguage ROM pack to the current ROM pack. (the Rradio.nbf may be skipped if the device is already unlocked).
6. At the end of copying, it might show an error message, press OK to ignore.
7. The phone will restart!
Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
Same here i reflash again last night but upgrade process fails on .02%
sorry if this post seems to be a repeat , but i tried the search option and the results were not fruitful
a friend of mine , while trying to upgrade to a TNT ROM , didn't HardSPLed the device first , and successfully changed the ROM of the device , now it is stuck on the blue screen with SPL and IPL versions , and no response . for some reason , the device can go to bootloader mode , but it can not be reflashed , and it does not respond to a hard reset command.
please advise on what to do
regards
When it is in the bootloader mode, and connected via USB, is there a little USB icon in the bottom left? If so, simply flash your phones carrier ROM and all should be fine with it again. You can then apply HardSPL and flash to the TNT or any other ROM that you want to. Is your device a G3 or G4 by the way? What are the numbers after IPL and SPL?
well my friend says that the USB icon is visible there , and the device was indeed a G4. the thing is , what exactly should he do , in order to flash the ROM , since non of imate roms work for it. should he use any special software?
i'll greatly appreciate your help
Is he using Vista or XP?
he is using Windows XP , could it be the PC OS that caused interference?
Well, only if it is Vista does it really matter. He needs to get ahold of an original carrier ROM, such as the O2, or T-Mobile one and flash it to his phone, then HardSPL it, then upgrade to 6 or 6.1.
Download and flash Wizard_love Rom,it might do the trick,then HardSPL and upgrade to any wm6 or 6.1 rom.
What exact error it gives while flashing imate official rom ?
well the wizard has been an imate ,and it was flashed with an Original imate ROM already , but no success , any other suggestions?
thanks again
error [294]invalid vendor ID :
This Update Utility can not be used for your PDA phone.Please check your update utility.
here is the picture
http://i35.tinypic.com/29v03rl.jpg
and could you please give a link to the Love ROM?
thanks
Download wizard_love Rom from this link:-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
No SD Upgrade even tough... MTTY hahahaha
king_dani said:
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
Click to expand...
Click to collapse
It seems you need to follow the drugstore MiniSD upgrade but...
I guess you dont have another wizard to make a bacuk up... so wait a minute...
You don have hardspled yopur device...!!!
HAHAHAHA forget it!mmmm
Maybe mtty... folow mi signature maybe works
See you There Men!!!!