Related
ok...i got the error from upgrading from 2.17 hacked rom to the 2.26 official rom. tried to read whatever i can but looks like solutions were given for cingular ipl etc...
can someone help me out? when i run the official rom, it updates to 1% and then i get the nbf error. i tried to run loki but mda not recognized by my usb connection.
stuck now...please help!!!
actually, tried to run machinagod's RAPI unlocker..but MDA not recognized as connected...this was part of xelencin's 2.24 rom updater.
please help!!!
Hi,
you must provide more information if you want someone to help you.
First and most important: what does it mean your phone is stuck? Stuck where? Does the screen come on? Can you get the bootloader screen? (for the bootloader screen: hold the two keys on the right side of the device and press shortly the reset hole; if you see the three colors screen then you have the bootloader!)
bye
i get the screen with the 3 colors, and usb at bottom left. when i run the official t-mobile 2.26 update, the screen goes gray and there is a bar with % done. when that kicks in, i get 1% done then it stops. on my computer screen, i get the nbk error, saying the nbk file that i have is not for my phone.
i looked for fixes but all the fixes require activesync connections which i am unable to connect with. just fyi, when i plug in the usb cable to my laptop, i hear the *ding* for usb noting it is connected but the activesync connection is not available.
thanks in advance for your help.
-mike
m3m3 said:
i get the screen with the 3 colors, and usb at bottom left. when i run the official t-mobile 2.26 update, the screen goes gray and there is a bar with % done. when that kicks in, i get 1% done then it stops. on my computer screen, i get the nbk error, saying the nbk file that i have is not for my phone.
i looked for fixes but all the fixes require activesync connections which i am unable to connect with. just fyi, when i plug in the usb cable to my laptop, i hear the *ding* for usb noting it is connected but the activesync connection is not available.
thanks in advance for your help.
-mike
Click to expand...
Click to collapse
Before your battery goes flat i suggest you to re-install your old rom. Don't know why 2.26 is not working, maybe you downloaded a corrupted archive. To install your old rom it is not required that activesync sees your phone. Go in bootloader mode and flash your old rom back.
i dont think i downloaded a corrupted rom file because i downloaded it from 2 different places, one from Tmobile site directly from my tmobile account.
what bootloader program should i use? please advise and location to download...
thanks,
mike
m3m3 said:
i dont think i downloaded a corrupted rom file because i downloaded it from 2 different places, one from Tmobile site directly from my tmobile account.
what bootloader program should i use? please advise and location to download...
thanks,
mike
Click to expand...
Click to collapse
bootloader program??? There's no bootloader program!
What i'm trying to tell you is:
- Your phone is stuck for unknown reasons. In this state you cannot recharge your battery!
- Before the remaining battery charge becomes too few, reinstall your old rom (the one you had before trying 2.26)
- When your phone -with the old rom- will be working again, then you'll have all the time to investigate on the causes of this failure.
- Now hurry up and install the old rom before it's too late (unless you have a second wizard that you can use to recharge the batteries)
To install the old rom you must go to the three-colors screen (the bootloader), connect to USB (but activesync won't start!) and start the rom installer.
bye
risi,
sorry...how do i get to bootloader screen? is it the tricolor screen? has anyone had the same problem that i'm having, going from 2.17 hack to 2.26 official?
what program can i use to load my original rom with?
sorry for the semi-newbie questions...desperate to revive my MDA...
again, thanks.
-mike
m3m3 said:
risi,
sorry...how do i get to bootloader screen? is it the tricolor screen? has anyone had the same problem that i'm having, going from 2.17 hack to 2.26 official?
what program can i use to load my original rom with?
sorry for the semi-newbie questions...desperate to revive my MDA...
again, thanks.
-mike
Click to expand...
Click to collapse
to go to the bootloader screen you must keep pressed the two keys on the right side of the device and, while keeping them pressed, shortly press the reset button. the bootloader screen IS the three colors screen. when you get the bootloader screen, reinstall your previous rom (2.17).
i plugged the phone in the wall charger and the battery charged up all last night so i am not worried about the battery...
i just cannot figure out how to load the old rom i had.
i didnt bring the phone with me to work...i will try to reflash with old rom...for now...i am using my old hp 6315 (yikes! - remember the probs with this phone?? lol
m3m3 said:
i plugged the phone in the wall charger and the battery charged up all last night so i am not worried about the battery...
i just cannot figure out how to load the old rom i had.
Click to expand...
Click to collapse
to load the old rom you must:
- get to the bootloader screen (the three colors one)
- download the 2.17 rom's ,exe archive (download it from the same place you took it last time)
- connect the phone to USB (don't worry if activesync doesn't see it)
- start the rom .exe file
thanks risi...
hope i can get it back man...
m3m3 said:
thanks risi...
hope i can get it back man...
Click to expand...
Click to collapse
I hope so! About the problem you had with 2.26, i don't know why it happened. Is your phone a T-mob USA MDA? If it is not then you must CID unlock it before flashing a different operator's rom.
Bye
yes, it is a tmo usa mda...or i would think so since i bought it from a factory store (not an authorized dealer). anyway man...i will keep you posted...for now, using my trusty hp 6315. lol
Hello,
I have a similar problem. I updated my QTEK 9100
with a T- Mobile 2.24 ROM. Now I need to go back to the original QTEK Rom, namely RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe, but after starting the upgrade process the program refuses to downgrade the device and says get a newer nbf file.
Is there a way to force a downgrade?
Many thanks in advance
Anais said:
Hello,
I have a similar problem. I updated my QTEK 9100
with a T- Mobile 2.24 ROM. Now I need to go back to the original QTEK Rom, namely RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe, but after starting the upgrade process the program refuses to downgrade the device and says get a newer nbf file.
Is there a way to force a downgrade?
Many thanks in advance
Click to expand...
Click to collapse
Is your phone CID unlocked? If so, then you must download the wizard_upgrade_noid tool from the ftp server and use it to install the 'down'grade.
In details:
- be sure your phone has been CID unlocked (and is not a G4)
- download the wizard_upgrade_noid (i don't remember the name exactly) tool
- use winrar to extract the original qtek rom .exe archive
- copy the noid tool to the folder where you extracted the qtek rom
- run it
bye
Hello Risidoro,
At first thanks for your fast answer. Since I have a QTEK I don't beleve it's CID locked. How can I verify if the phone is CID locked? Is there a tool to check this?
I proceeded exactly as you advised. I used Winrar to extract the files and used the Wizard_RomUpgradeUtility_noid I downloaded from the ftp site.
Then I copied the nk.nbf file to the respective folder but the utility after having completed the initial 2 screens says:
ERROR [238] : FILE READ
The update utility cannot open the requested file. Please check your update utility.....
any ideas
Greetings
Hello,
Just some small updates: My phone has currently the Mr Clean 2.3 firmware loaded : IPL 2.24 SPL 2.24 GSM 02.25.11 and OS 2.24.10.1.
Previously I was using RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe and had no problems. After upgrading to xelencin t-mobile based US rom I had trouble when making data transfers over GPRS. Then I decided to test Mr clean. Altough I data transmission has improved a bit it's still not so good as with my original RUU 2.17 release.
Unfortunately I am unable to revert to this version. Also having tried to downgrade using Faria's Custom downngrade file only the IPL was downgraded to 1.05 and the SPL file stayed to 2.24.
I tried then to reapply RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe but I recieved the error message UPGRADE only.
Since apparently this is unstable I decided to reapply Mr Clean and now I have again IPL 2.24 SPL 2.24 GSM 02.25.11 and OS 2.24.10.1.
I suspect that the data problems are due to the fact that these new radio versions are not compatible with our provider. I live in Luxembourg so we use LUXGSM.
Is there a way how I can revert to my old 2.17 software.
Any coments are highly appreciated.
Greetings
Anais said:
Hello Risidoro,
At first thanks for your fast answer. Since I have a QTEK I don't beleve it's CID locked. How can I verify if the phone is CID locked? Is there a tool to check this?
I proceeded exactly as you advised. I used Winrar to extract the files and used the Wizard_RomUpgradeUtility_noid I downloaded from the ftp site.
Then I copied the nk.nbf file to the respective folder but the utility after having completed the initial 2 screens says:
ERROR [238] : FILE READ
The update utility cannot open the requested file. Please check your update utility.....
any ideas
Greetings
Click to expand...
Click to collapse
Hi Anais,
try flashing with the RUU (Rom Upgrade Utility) tools that you find in this thread: http://forum.xda-developers.com/viewtopic.php?t=56088
Download the archive RUU.rar and extract its content somewhere in your PC. Copy in the same location the nk.nbf from the rom and run the .exe.
bye
I was upgrading my t-mobile 8150(?) the k-jam with the new windows mobile 6 and in the middle of it my comp crashed!! now i am stuck at the bootloader mode (3 colored screen) and when i try to redo it i get to 99% and get a 302 error message. i follow the instructions given but keeps going in circles. its a G3 so is my phone bricked or is there a way to save it? i've been looking at this site all day but am now just more confused. lol thanks for your help!
No your phone isn't bricked. As long as you can get into the bootloader screen you should be ok. What you need to do is flash an official carrier rom either tmobile 2.26 or wizard love rom after you that than you can reflash to wm6. look at the stickies in the wizard forums that is where you can find these roms.
Thanks for the info but seems my techno curse continues. I tried the wizard love rom but it was in a different language and whem i tried the tmobile 2.26 i got "error 274 connection." Any more suggestions? Again thanks soo much for an issue I'm sure has been posted here a thouand times.
This happens to me all the time. I always use the Cingular 2.25 rom, it works perfectly and I have an I-mate K-JAM. Then, do the WM6 upgrade, but ensure all of your Norton and Antivirus and background running apps are shut down. Good luck.
yes also take out your mini sd card if you have one. even though its in another language it will work. "AVANTI means next. so just keep hitting that and you will be fine.
hmm been trying to d/l the Cingular 2.25 rom but the link seems to have stoped working...
It;s aaaaaaaaaaaaaaalllllllllliiiiiiiiiiivvvvvvvvvvvvvvvvveeeeeeeeeeeeeeeee!!! for now lol Lets see what happens after i install wm6 I couldn't get the cingular rom but i had already dowbloaded the button rom i found here earlier and it worked like a dream!! quick and easy!! thank you all soooooo much!
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
flash to the tmo 2.26 or cingular 2.25...that will give you an IPL/SPL of 2.xx
then, you can flash to WM6
i want to delete this message. can't find a way to do it.
there's any other way to flash without usb cable?? sorry to bug in this thread but i lost my usb connection somehow and did a hard reset and still doesn't work. my phone charges. and no is not my computer cuz my wifes phone same as mine does sync i have a tmobile mda also known as the cingular 8125.
fallon75 said:
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
Click to expand...
Click to collapse
keep reflashing buttons rom until both ipl/spl are the same number. if they are different, then the flash didn't complete correctly. (it happens often, so it's kinda normal). just keep reflashing. after both ipl/spl are the same, then CID unlock and then update to an official carrier...then flash a wm6.
can anyone help me??
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
starkwong said:
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
Click to expand...
Click to collapse
it does shows but how can i flash?? it still won't connect o my pc. my pc doesn't recognize it. but it does recognize my wifes phone.
Try to run RUU straight with Wizard connected and running in bootloader mode
Dear all...
i have i-mate k-jam i try to upgrading with Official rom the devise is accepted upgrading but after complet freezing also i try to do another upgrading but i see this information i attached the pic cuz i don't see any info .....to upgrading
respactfully
GSM system said:
Dear all...
i have i-mate k-jam i try to upgrading with Official rom the devise is accepted upgrading but after complet freezing also i try to do another upgrading but i see this information i attached the pic cuz i don't see any info .....to upgrading
respactfully
Click to expand...
Click to collapse
hi
Plz be specific from where did u download the official rom,which u said u tried to flash.was it from official i-mate club ftp site and what was the version of the rom u tried to install,cuz they don't have any upgraded version on this site apart from the last wm5 dated year 2006. i-mate is not offering any wm6 upgrade to any of its products.
secondly, which other rom u tried to flash afterwards?
as far as ur attached pics r,if u can reach to this screen than do not worry about the upgrade info,as it's sometime displayed and sometimes not,just hit the upgrade.
if it completes than it's alright,but if it stucks for a very long time and displays any error message.it means it has not upgraded.
Many thanks .....zabardast_1 ..
i upgrading ..with this rom K-JAM_Arabic_2160901_21609102_20710_ship... thanks
GSM system said:
Many thanks .....zabardast_1 ..
i upgrading ..with this rom K-JAM_Arabic_2160901_21609102_20710_ship... thanks
Click to expand...
Click to collapse
Goodluck,If it upgrades successfuly do let us know,
Btw, it's an ;ld wm5 Rom,why don't u upgrade to newer wm6 Roms ?
Brother ....the Same problem ...So what i don't you have another solution ..please
br
GSM system said:
Brother ....the Same problem ...So what i don't you have another solution ..please
br
Click to expand...
Click to collapse
ok,first plz post the exact details of ur k-jam,
1.IPL.....?
2.SPL....?
3.GSM...?
4.OS ver? ( Arabic or WWE)
secondly,tell what exactly happened and what error r u getting.
thirdly,what u want to upgrade to,I mean Arabic or English version of Rom ?
brother .....the first many thanks to you
this is the Device inf
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
thanks i wait your post
GSM system said:
brother .....the first many thanks to you
this is the Device inf
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
thanks i wait your post
Click to expand...
Click to collapse
ur phone's ipl/spl 2.16,it's a AKU 2 version,therefore check the rom with which ur trying to update shud also be aku2.the update rom shud be newer than the one already on ur phone.
So what i doing Now can you fined to me any solution plz ...
br
GSM system said:
So what i doing Now can you fined to me any solution plz ...
br
Click to expand...
Click to collapse
can you tell what exactly is the problem you are having at present is it that:-
1. you are not able to complete flash,it stops and give some error,if so then what error it shows ?
2.RUU starts to flash,but when it comes to the screen where it verifies the updating rom's info,there you don't see any info,as per your first post,than you discard the update?
3. is the version of the rom newer your are trying to update with then the one already on your device
plz verify these ?
Brother ... i am Sorry to bother you ..
1-about the flash my device is complet flash and the Computer tell me 100% congratulation .
2- the device don't accept factory Default
3- my device is freezing on splash screen. i-mate
many thanks ..
Hiii ...
my Device Stell dosen't work Freezing So please what i doing
br
GSM system said:
Hiii ...
my Device Stell dosen't work Freezing So please what i doing
br
Click to expand...
Click to collapse
Ok,lets try this way out,try to do a hard reset,to perform hard reset :-
1. Press and hold the Comm Manager button and Voice Command button on the device,than
2.While keeping the two buttons pressed with one hand, and at the same time,with other hand,use the stylus to lightly press and hold the soft reset button.
the device will reboot and restart again,see if it starts to work alright.If still freezes at the splash screen,than I'll suggest you do this,it really sometimes help and I have solved my problem so many times by doing this :-
Reboot your PC, run disk clean on Drive C:\,delete all the Temporary internet files,Temp files rather check mark all the options in the disk clean wizard option and hit ok,this will delete all the junk files from your PC,now delete all the cookies in the internet options,after doing all this,switch on your phone and go into Bootloader mode(tri color screen),when there than connect your phone to the pc using usb cable but don't active sync your phone,cancell active sync if need be,when you connect your phone with pc via usb,look at the screen of your phone you will see a little usb shown at the bottom of the screen.
Now open the rom which you downloaded and execute the Ruu..,it will start to flash,let it complete ,it will confirm flash and reboot,it start now and work normal, I hope,it will solve this problem remember don't do anything else with the pc like browsing the web or reading e-mails,playing games or working on Microsoft office,don't touch you pc and phone while the rom flashes.
Well,there is another way also,but as you want the official arabic version rom on your phone,do it first as i told you above,if it works,good,otherwise we will do the second method good luck
Amazed !
Hmmm, sry to say I observed you joined this forum on Dec,2006 and posted 57 times,just went through your posts and was amazed that you already have gone through this unlocking and upgrading on different devices,well you seem to have quite knowledge about all this,than how come you are stuck with this problem now ?
I hope your not just kidding me ? or your are really stuck up and seeking help ?
Hello ...
sty ...my Device freezing on K-JAM ...i don't know how to solved this problem i tryed more mothed but no way so what i doing ....now just my device inter in bootloader ...also accept it the offical ROM from i-mate ....
respactfully
GSM system said:
Hello ...
sty ...my Device freezing on K-JAM ...i don't know how to solved this problem i tryed more mothed but no way so what i doing ....now just my device inter in bootloader ...also accept it the offical ROM from i-mate ....
respactfully
Click to expand...
Click to collapse
ok, what is the present status of your phone ? what ipl/spl...? it shows in bootloader mode ?
as you posted in another thread that you tried to flash wizard_love_rom,but did not succeed,earlier you only wanted to upgrade to an official arabic i-mate k-jam rom.Now do you want to upgrade to any rom ? by unlocking the phone ? or just want your phone to work by any means ? if yes,then there's another option to get your phone working,I really hope so.Plz confirm what you want to do now ?
thnaks a lot btother .
this is the info my device in bootloader
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
and i tryed to flash with another rom like this RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe but i can't i see this messege INVAILD VENDER ID also i tryed to use this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe in this link http://forum.xda-developers.com/showthread.php?t=310831 my device accept flash also the splash screen is changes but no way stay freezing So ..please how can i do it to start my device agein.....
respactfully
GSM system said:
thnaks a lot btother .
this is the info my device in bootloader
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
and i tryed to flash with another rom like this RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe but i can't i see this messege INVAILD VENDER ID also i tryed to use this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe in this link http://forum.xda-developers.com/showthread.php?t=310831 my device accept flash also the splash screen is changes but no way stay freezing So ..please how can i do it to start my device agein.....
respactfully
Click to expand...
Click to collapse
ERROR [294] : INVALID VENDER ID
these error messages appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device.
Well, as I can think,you had an Arabic rom version OS 2.16.9.1 Arabic on your phone before and tried to flash a wwe version rom.the bootloaders verified and did not accept the rom.So a bad flash and splash screen got freezed,the only way is to flash and try to downgrade to IPL/SPL 1.xx and CID unlock the device and upgrade to another rom to start working, or flash the official stock Arabic rom to bring back the phone to it's default status,but the official rom you downloaded and tried to flash was of the same OS version didn't flash correctly and got splash screen stuck.Therefore,the only option left at present is to try and downgrade it to IPL/SPL 1.xx.The options are :-
1.Try to flash again button's rom 'CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe ' Which you already have with you,a couple of times more and see if it might work,
2.Otherwise download this rom from the link below and flash,hope it'll work :-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
If successful,good,but if still fails,
3.there's still another option to flash the rom with replaced 'Romupdateutility' in the rom,which I'll explain how to do it later,
first try the option 1 & 2,lets hope it works,good luck
brother Many Thanks ..
I will do that and tell you ...also please if you can explam me how to flash the rom with replaced 'Romupdateutility'.....
respactfully
My friend Zabardast_1
please look this is the info befor i Downgrading with this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
now my device in Bootloader
IPL 2.16
SPL 2.16 ..
okay .... now i starting to downgrading ...my Device with this ROM CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
please note this pic i attached to you ... then after downrading ...this is my device info in bootloader .
IPL 1.01
SPL 2.16
now after i downgrading no thing happend just the splash screen change also i acctached to you image to see that ...
2nd step i tryed to flash my Device with this ROM Wizard_Love_2.26.10.2_WWE_Novii_CF2 what happend ( Error 300) also i attach to you image
now i wait your help ..please
respactfully
Is my K-Jam totally bricked?
It is now stuck up in bootloader screen.
I am able to swtch it off with power button. I can also have first flash screen.
On connecting with USB port, it shows yellow light indicating that it is charging & that over a period of time, goes green.
Earlier I had flashed TNT ROM but while reflashing newer it got stuck up as after flashing, I tried to hard reset [mistakenly thought ROM is flushed fully] & could not go further after initail first screen.
Other details:
IPL:2.16
SPL:2.16
GSM:02.07.10
O.S.:11.0.0.2
May some one help?
Thanks in advance.
Virat
Nopes ! its not 'Bricked' just had a bad flash. As long as it gets into bootloaders ,its perfectly safe. Perhaps,your phone is not CID unlocked ?
Download the official carrier's rom from its website and flash it in the bootloaders,it'll start to work fine.Then read the guide to cid unlock and upgrade.
Cheers!
boot issues
hi
i am having serious problems with my kjam.i installed black diamond's rom and now my phone boots upto the splash screen where it shows window mobile 6 and gets stuck there.
i have tried a soft spl, but it doesnt help as the phone cant connect or move from the splash screen.also, i can make call or do anything with the phone.
can someone assist me and also point me to a place where i can find the lastest tnt rom.
ghumanfly said:
hi
i am having serious problems with my kjam.i installed black diamond's rom and now my phone boots upto the splash screen where it shows window mobile 6 and gets stuck there.
i have tried a soft spl, but it doesnt help as the phone cant connect or move from the splash screen.also, i can make call or do anything with the phone.
can someone assist me and also point me to a place where i can find the lastest tnt rom.
Click to expand...
Click to collapse
Always post vital data of the phone,which is your device G3 or G4.Have you Tried Soft Reset or Hard Reset.it sometimes help.
Well,if it's a G3,is it SIM/CID unlocked,cuz its required to get the phone CID unlocked to upgrade to wm6,but if its a G4,then use method 'SoftSPL' or 'HardSPL' as it cannot be CID unlocked.
Post IPL/SPL...? of the phone here.
You can find all the latest wm6 Roms in 'Wizard Mobile 6' forum.
Cheers!
Thanks but solution found while reflashing in XP
Thanks for the reassurance Zabardast. I cold not even reflash it with vista but in xp, it sailed smooth. It is working normal now. Any way, thanks again for responding.
Virat
virat said:
Thanks for the reassurance Zabardast. I cold not even reflash it with vista but in xp, it sailed smooth. It is working normal now. Any way, thanks again for responding.
Virat
Click to expand...
Click to collapse
Thanks !
Glade you got it working
Have a nice day !
zabardast_1 said:
Always post vital data of the phone,which is your device G3 or G4.Have you Tried Soft Reset or Hard Reset.it sometimes help.
Well,if it's a G3,is it SIM/CID unlocked,cuz its required to get the phone CID unlocked to upgrade to wm6,but if its a G4,then use method 'SoftSPL' or 'HardSPL' as it cannot be CID unlocked.
Post IPL/SPL...? of the phone here.
You can find all the latest wm6 Roms in 'Wizard Mobile 6' forum.
Cheers!
Click to expand...
Click to collapse
Wireless Carrier
Vodacom
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
Roms tried
BlackDiamond 3.1
i am running XP SP2 on my notebook.
i have restored the original WM5 rom however my screen is now fuzzy.
ghumanfly said:
Wireless Carrier
Vodacom
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
Roms tried
BlackDiamond 3.1
i am running XP SP2 on my notebook.
i have restored the original WM5 rom however my screen is now fuzzy.
Click to expand...
Click to collapse
'Hard Reset' the phone,hope it'll work fine.
Well,I assume,you cudn't do the SoftSPL correctly the first time,try to apply the SpftSPL again correctly,if it works,ok,otherwise you can upgrade to wm6 with HardSPL method.
ba salam khedmate aghaye zebardast
duste aziz man ppc imate kjam daram ke eshtebahan soft spl kardam va rom wm6 prophet rush rikhtam ba tavajoh be inke seri gushi man g4 wizard bashe (ipl&spl 2.16.0001) kholase gushi alan tu safeye avali ke windows ba yek logo az rom marbuteh miad bala gir mikoneh .albateh 2 ta rom kjam asli wm5 ham gir avordam rikhtam vali hamunjuriye albateh jaye shokresh baghiye ke gushi tu halat bootloader gharar migireh va hard reset ham mishe. lotfan be man komak konid ta moshkelam ro hal konam. ba tashakor az shoma
could you please ,solve my problem kjam g4 wizard
laike salam brother
thank you very much for direction. I want to answer your question:
Quote:1. Which was the original official rom running on the phone before you tried to upgrade ?
1- I think wm5 belonge to 2005 becose it is written under the battrey.
Quote:2. What was the original wm5 rom and IPL/SPL of the phone before ?
2- I couldent remember but this phone approved by uaelab company [TA-2005/453 approved][E05/14/40225/g]and I flash with different official rom which you mentioned at ftp://ftp.clubimate.com but nothing happend ,maybe I do somthing wrong.
Quote:3.What exactly you mean you copied jumpspl to the root of the phone,did you applied SoftSPL ?
3- yes correct I did softspl with whit coulor screen then connected to pc and did toast that .
also I have problem to connect wst 4.2.2 to my ppc.
I download it and run, but the software couldent detect my fhone I dont know why .I connet it from bootloader 3coulor but nothing happen and so on.
could you please to explain how can I work with wst 4.2.2 also very important how to connect that because it says I have to connection with activesync .
pls direct me pls
mamnun
kourosh
sorry if this post seems to be a repeat , but i tried the search option and the results were not fruitful
a friend of mine , while trying to upgrade to a TNT ROM , didn't HardSPLed the device first , and successfully changed the ROM of the device , now it is stuck on the blue screen with SPL and IPL versions , and no response . for some reason , the device can go to bootloader mode , but it can not be reflashed , and it does not respond to a hard reset command.
please advise on what to do
regards
When it is in the bootloader mode, and connected via USB, is there a little USB icon in the bottom left? If so, simply flash your phones carrier ROM and all should be fine with it again. You can then apply HardSPL and flash to the TNT or any other ROM that you want to. Is your device a G3 or G4 by the way? What are the numbers after IPL and SPL?
well my friend says that the USB icon is visible there , and the device was indeed a G4. the thing is , what exactly should he do , in order to flash the ROM , since non of imate roms work for it. should he use any special software?
i'll greatly appreciate your help
Is he using Vista or XP?
he is using Windows XP , could it be the PC OS that caused interference?
Well, only if it is Vista does it really matter. He needs to get ahold of an original carrier ROM, such as the O2, or T-Mobile one and flash it to his phone, then HardSPL it, then upgrade to 6 or 6.1.
Download and flash Wizard_love Rom,it might do the trick,then HardSPL and upgrade to any wm6 or 6.1 rom.
What exact error it gives while flashing imate official rom ?
well the wizard has been an imate ,and it was flashed with an Original imate ROM already , but no success , any other suggestions?
thanks again
error [294]invalid vendor ID :
This Update Utility can not be used for your PDA phone.Please check your update utility.
here is the picture
http://i35.tinypic.com/29v03rl.jpg
and could you please give a link to the Love ROM?
thanks
Download wizard_love Rom from this link:-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
No SD Upgrade even tough... MTTY hahahaha
king_dani said:
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
Click to expand...
Click to collapse
It seems you need to follow the drugstore MiniSD upgrade but...
I guess you dont have another wizard to make a bacuk up... so wait a minute...
You don have hardspled yopur device...!!!
HAHAHAHA forget it!mmmm
Maybe mtty... folow mi signature maybe works
See you There Men!!!!