I have had my wing for just a few days, so I am still learning what it can do.
I can easily connect to my home wireless router and have a strong signal. When I open IE, the wing starts loading a GPRS signal and then I get a default page with a tmobile splash and a search box. When I try to enter www.google.com it just sits there.
I dont think something is correct. I want to browse the internet directly with IE on the wing with my wifi.
I do not have a internet or data plan of any kind.
It does have WM6.
Any ideas?
Are you sure that you've achieved a connection with your router?
Go into your WIFI settings, and make sure you have acquired an IP address... the little antenna icon may show up at the top, but you may not be fully connected.
In WIFI settings, configure says i'm connected.
In network adapters, SDIO Wlan shows "use server assigned address" checked,
and it has a IP address in it.
Am I in the right place?
Just spent some time with tech support on a landline. Fixed the problem in a wifi configuration menu. Changed it from "work" to "internet".
Done.
I can stop beating my head on the wall now.
Related
I cannot connect to wifi. It says connected and it says i have an IP address but i can't navigate to any webpages. I use WEP and have WM5. If I enter a wrong wep key it won't connect so i feel that i am actually connected to the network just my device isn't realizing it. Is there any manager like the cooked rom of 2003se where i could manually choose WLan as my option to connect to the internet. I have also tried turning off wep on my router and other settings like that. Changed in between connected to work or the internet. Any ideas?
I found the problem. for some reason it was trying to connect on my gprs proxt server. that would always deny the connection. I had to set up my GPRS as my work connection and a generic connection that connected to the internet and ONLY put this network connects to the internet. Also it only worked if i used the existing my work connection and didn't work if i created my own with the same settings..
All is now well in thw WM5 world.. no more resets!!! think this might be a bug though..
I just realized that this ONLY pertains to ATT GPRS settings because they are the only ones who need to set up a proxy server..
now that connections work with my wifi i have one problem and this occurs with GPRS also.. my connections seem to time out. I was trying to download about 50k of mail and after about 10 messages it says "Unable to connect to incoming mail server" I've been connected just fine.. then the connections fails.. i have to do it all over again..
Hi,
I've got an Alpine and all the ROMs are simple out-of-the-box as from O2 back in september.
Previously, I would use it to connect to the wireless network in my university. I would turn on the wifi then select the network to connect me to the internet and then enter the wireless key we have been provided with.
However, now it just stays on 'scanning network' and doesn't prompt me to choose a network or enter any key. Sometimes it claims that an IP has been assigned, but it doesn't progress past this. I have tried soft resetting and changing the wifi from 'best battery' to 'best performance'. I have also tried being really near the router.
My friends can access this network just fine on their laptops, and when I run WiFiFoFum it shows up just fine. I am pretty certain the router is a 802.11g one, and I can't tell if it's been changed since I could access it before.
My problem is I know virtually nothing about WiFi, so I don't know how to troubleshoot this. I was hoping someone could give me a bit of help?
Thanks.
try this.
turn wifi on
go to settings
connections
network cards
see if you have networks listed, if u do delete them.
turn off wifi and turn back on again so it searches. see if it picks up the network.
Failing that what IP is it showing u, if its assigned one??
Help!
I have a Netgear DG834T router as provided by Sky. I have one wired and two wireless connections running into it (let's call them WD, WL1 and WL2 respectively).
On the connections page I can see all of them under "attached devices"...but now I want to connect using my Kaiser (actually an O2 XDA Stellar)
What happens...
On the Kaiser, I get an IP address (assigned by DHCP) as normal - but can't access the internet - or at least, can only access it very rarely - http://www.google.com can't be found, but http://www.bbc.co.uk can. No idea why.
On the router, under "attached devices", not only can I NOT see the Kaiser, but WL1 and WL2 also disappear. WD remains visible. The router cannot ping the IP address of the Kaiser (timed out). If I disable WiFi on the Kaiser, then WL1 and WL2 are immediately visible again. Internet connection on WL1 and WL2 works, even when they are not visible.
I HAVE connected to this network before without any problems.
What the hooting heck is going on, and how do I fix it?
Thanks!
Time to troubleshoot! What happens with this phone on another wireless network. We need to determine if it's the phone or the network. Do you have any friends with a phone like this? Can you use their phone on your network? Do you have any ROMs flashed, has this phone ever been on the network without problems?
If the phone works on another router try looking for firmware updates for the router. Those things really do need to be updated often and it could have something to do with that.
Only have access to one network :-(. Might be a couple of weeks before I can access a hotel one or something like that.
Think next door neighbour has similar phone, but different provider...will try if he'll let me!
No ROMS flashed.
It connected fine when I first had it. As far as I know, I've changed nothing since then.
2 out of 4 answered...with an option on three...I'll get back to you as soon as I've beaten up my neighbour and stolen his phone...
Joke!
There should be somewhere you can go to test that wireless. I can walk outside the building I'm in and find one.
ChumleyEX said:
There should be somewhere you can go to test that wireless. I can walk outside the building I'm in and find one.
Click to expand...
Click to collapse
You = US, me = UK. We still think the biro is a recent invention...
Neighbour's phone on my network gives the exact same problem. I've also noticed that when I click "Renew IP" on the Kaiser it doesn't work...it gives me 0.0.0.0, but will occasionally flash up the correct IP address. It's alomst as if the connection is being lost and remade every few seconds. The status ist gives me is "associated to network"...is that different to "connected"?
I've been trying to solve this on my router, but none of the settings seem to make any difference.
Same here
I get the same with the router from sky.
Kaiser says I have an IP address, 192.168.0.5, but the it doesn't show up on the attached devices on the router.
What I find that works is hit renew IP maybe twice until you get a really wierd IP address like
169.254.*.**, actually not sure if I'm picking up another network, but for some reason I don't think I am.
I can then browse the web and sync via wifi.
Really pisses me of that it says that it has an IP address but doesn't connect.
1) Make sure you dont have a proxy set up on your wifi connection on your device.
2) The 169. address is your device getting an unauthorised IP address as the router did not receive the correct encryption key from the device.
3) You can check if its an encryption thing by simply logging in to the router (192.168.0.1 in your web browser on pc) and changing the settings to turn wpa off and testing it. The routers username and password are on the card - its something like "sky" and "admin"
Yeah I agree, there is something up with that router.
Grey Area said:
Neighbour's phone on my network gives the exact same problem. I've also noticed that when I click "Renew IP" on the Kaiser it doesn't work...it gives me 0.0.0.0, but will occasionally flash up the correct IP address. It's alomst as if the connection is being lost and remade every few seconds. The status ist gives me is "associated to network"...is that different to "connected"?
I've been trying to solve this on my router, but none of the settings seem to make any difference.
Click to expand...
Click to collapse
with my router.....i have to set the wifi power mode on my kaiser to "best performance", any other setting and i get that "associated to network" ****. been this way every since the hermes and the wizard.
unwired4 said:
1) Make sure you dont have a proxy set up on your wifi connection on your device.
2) The 169. address is your device getting an unauthorised IP address as the router did not receive the correct encryption key from the device.
3) You can check if its an encryption thing by simply logging in to the router (192.168.0.1 in your web browser on pc) and changing the settings to turn wpa off and testing it. The routers username and password are on the card - its something like "sky" and "admin"
Click to expand...
Click to collapse
No, proxy set-up as the device was bought unbranded in US.
Because there are issues with this router, encryption and media streaming devices, I have only restricted the mac addresses with no encryption.
Still don't know about the 169. ip address beacuse doesn't seem to come up as am ISP.
Now then, how wierd is this?
After all these issues and kind of giving up on it as a bad job, I also noticed that out on the road, my GPRS wasn't working either - TomTom couldn't connect to the "plus" traffic service.
I get on the phone to O2 who told me that my phone hadn't been "provisioned". After one false start where they didn't seem to do anything about it, I have just (literally) had them tell me to go to the O2 Operator settings and tell it to update the "O2 UK Post Pay_GPRS" and reboot.
GPRS now works. And magically, so does my WiFi - IP address negotiated and full access to internet and my router's setup page granted. Working like a charm again.
So - seems to me it's an account setting, and nothing to do with either me poor ol' router or me nice new phone.
For completeness, I was occasionally getting the 169 IP address too, so it sounds like we have EXACTLY the same problem - suggest you get onto your service provider ASAP.
Hi,
I have just got the Diamond and I have two main problem.
1) Although I have connected the Diamond to my Home wireless network, there is no data transfer. Opera can not open pages, Youtube can not start even I can not update weather?
2) When I connect the Diamond to the Laptop / PC, all PC's and Laptops connected to my home network (wireless) drop from the connection and never connect again?
Thank you for your kind help...
I have same problem with my Diamond.
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
bobo_error said:
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
Click to expand...
Click to collapse
Thanks for your reply, but both of solutions do not work for me...
Any other suggestion?
Thanks for your help..
Try turning on wifi, then go in LAN WIRELESS and change in "improved performance"
All of this do not work for me too...
Go to Wireless LAN settings and there to power mode and set yo best battery.... that worked for me.
in "settings => connections => WiFi" is "Connected". In "Wireless Lan" there is Connected too... In log on my router there is MAC adress of Diamond as associated and authorized. All seems OK. But on Diamond do not work any internet connection (Weather, web, etc...). With Active Sync works fine. Laptop with the same settings works fine. But Diamond with WiFi... no way :-(
Any other suggestions?
Same problem after i made ROM update from 1.7... to 1.93. before works fine. no other software is istalled.
Been having an issue with connecting to my wireless network also for the last week. My phone is from orange in the UK. My wireless router is an Dlink 614+ on Virgin cable broadband.
The Diamond would connect intermittantly but then say 'not avaiable' after a period of time, or when trying to reconnect after diasbling/enabling wi-fi in the comms manager. Also, after restarting my router the device would connect for a while but not seem to 'hold' it's connection.
When the device was 'connected' I could not get opera/youtube to load a page, even though I could see the diamond in my router's log showing it connected with a leased ip address. What made it so annoying was that every other wireless mobile device/laptop I have owned has connected without any problem at all, leading me to beleive there was a problem with the phone. Again, this was rather frustrating as the phone was detecting avaliable networks but just not 'holding' the connection nor 'using' the connection in opera/explorer etc.
After searching on xda-developers and other forums for a possible known issue, I tried all the various suggestions including;
i/ increasing to best performance under power mode in Wireless LAN settings
ii/ Hard reset of router (even though other wireless devices were connected fine)
iii/ trying static rather than dynamic ip for my diamond in router settings
iv/ disabling any security/encryption on my router
v/ entering DNS settings in manually into my diamond
vi/ changing 'connect to' under wi-fi neteorks to 'Work' rather than 'the internet'
vii/ tried various roms
and other suggestions I had read about - all which didn't make a difference!
I was about to send the diamond back to Orange (here in the UK) but decided to give it one last go and change my router. I bought a Netgear WGT624 for 25 quid from PC today world and my diamond connected
straight away without an issue, and opera/youtube/messager all connected straight away to the internet. I have not lost connection once. So thats how I resolved it - obviously my device did not like 802.11b (on the original dlink router) even though all previous smartphones have connected fine and the diamond's wireless adapter is labelled b/g.
Hope that stops anyone wasting a week like I did, I would try it out on another router before making any decisions because the chip in the diamond seems a lot more picky to what it connects to than anything I've used in the past!
cheers
Linksys WAG54 is OK, Freebox is not perfect
It really seems to depend on the WiFi router.
I've had probems with my French Freebox (my ISP's ADSL+wifi router) using WPA2 AES. It would work fine, for half an hour maybe, then it would stop. It says it's connected but there is no data transfer. You can switch WLAN off and on, soft reset the phone... nothing will do. Then it will work again later on.
I downgraded encryption to TKIP and i experienced the same problem.
But then I've tried my old Linksys WAG54G router, using the exact same encryption protocol and key and it works perfectly (for hours)!
I've also tested free access (Paris public Wifi, Mc Donald's...) and they work fine.
As my ISP wifi box does not let me have a look at all the settings (beacon time, etc.) it is very difficult to tell what makes it not-so-compatible with my Diamond... But there must be something.
It worked yesterday but now won't. If I enter proxy settings into orangeinternet acp the same as orangewap then it works for http traffic but not email.
I have done a lot of setting up on the phone since it arrived yesterday but I can't think what I can have altered in the gprs settings.
I had the same issue with my Touch Cruise on the newer ROMs and it went away when I reverted to the official HTC Cruise 6.1 ROM.
Any ideas anyone?
You could always try running the network setup wizard again?
You could always try running the network setup wizard again?
Click to expand...
Click to collapse
I tried that several times - it doesn't work. I think it must be a screwed setting from setting up something like exchange server in activesync.
Everything works under wifi.
I am really hoping I don't have to do a hard reset and start all over again.
Try putting a different operator's sim in and let it set everything up for it, then put your orange sim back in and go through the auto setup again. If that doesn't work then a hardreset might be your only option. Going from your other posts in the themes, applications and software it looks like your phone is really playing up so a hardreset might be best all round, only install one thing at a time and test everything after every install and customisation until you find out what you're doing to break it, then don't do that step again.
Have you messed around at all under the network advanced options where you set things like HSDPA etc
Thanks for all the replies. I've ended up hard resetting and re-customising one thing at a time.
The thing that breaks it seems to be when I change the wifi settings. I have a non-standard wireless network at home and I have to specifiy the IP address and default gateway in the "network adaptors" settings for wifi. Once I access the network with these settings it breaks the cellular data connection!
Like I said earlier, my Cruise did this as well with the later ROM such as Udk's and C_Shekhar's. When I went back to the official HTC 6.1 ROM everything worked fine.
I have now reverted my wireless settings to standard (i.e. DHCP) and it has restored the cellular connection but, obviously the wifi doesn't work.
If I can't sort this I'll have to rethink my home network.
Sounds like you're using set IP addresses on your home network for port forwarding or something of that nature. Have another look in your router's settings as most decent ones will allow you to reserve IPs from the DHCP range for specific MAC addresses, that way when the computers or other devices ask for an IP they get given the same one every time. Things really do work much more smoothly as far as networking goes when DHCP is working. If you really do need to specify IP addresses manually then just let the router hand out addresses by DCHP from a restricted range, e.g. if you manually specify addresses from 192.168.1.2 to 192.168.1.10 then set the start address for DHCP to 192.168.1.11.
Thanks, shuflie. It's actually to do with the default gateway. I have an orange livebox doing the adsl work so I can plug a telephone in to it to get free calls. However, the wireless is useless on the livebox so I have a netgear wireless router on the network as well. The trouble is, DHCP won't work that way so I have to set each wireless device up with a dedicated IP address and direct it to the livebox as the gateway.
For some unknown reason, this breaks cellular data on winmo devices.
Anyway, until I find a solution I have removed the orange livebox from my system. I'll just have to live without the broadband phonecalls which is no big deal tbh.
I actually run a non standard network here too, a SKY ADSL router to provide the broadband access and a Netgear router which all my computers attach to. Both router are set up as DCHP servers, but the SKY box only gives out an address to the Netgear router, the Netgear hands out the IP addresses for everything else. The only drawback I've seen so far is that it seems impossible to initiate a connection from the outside world to any of the computers on my network because of the dual NAT that is happening, but that isn't necessarily a bad thing as it makes it harder to hack in from outside. I don't have to point the computer and other devices to the SKY box as the gateway, I just let the Netgear router think that the connection it is getting from the SKY box is a direct connection to the outside world. Everything seems to work just fine, no problems with network gaming on the playstation network and torrents, skype, web etc. seem to work just fine. If you can't live without the broadband calls you could give it a go.
Should have said that the SKY and Netgear routers are on different subnets, 192.168.0.x for the SKY and 192.168.1.x for the netgear.