Kaiser crashes after hanging up - Tilt, TyTN II, MDA Vario III General

Hi @ all !
I have the problem, that the phone hangs up after I stopped a phone call by using the red button or pressing "end call" on the display. If the person, I´m calling is ending the phone call, everything is ok, but as soon as I stop it, the display gets darker, and still, I can navigate thru the menues, but I cannot open the windows start menu anylonger and next to the windows logo in the top bar, theres the word "phone" or "contacts" instead of "start".
Anyone who can confirm this bug ?
Cheers
Marco

MRedZac said:
Hi @ all !
I have the problem, that the phone hangs up after I stopped a phone call by using the red button or pressing "end call" on the display. If the person, I´m calling is ending the phone call, everything is ok, but as soon as I stop it, the display gets darker, and still, I can navigate thru the menues, but I cannot open the windows start menu anylonger and next to the windows logo in the top bar, theres the word "phone" or "contacts" instead of "start".
Anyone who can confirm this bug ?
Cheers
Marco
Click to expand...
Click to collapse
I have found three work arounds:
1) Press the power button off and then on and everything should be normal.
2) While on a call, have your device connected to your charger (No bug while on external power)
3) Use the following hack (Thanks to someone who posted this already here on XDA):
Modifying the DWORD stored in:
Code:
\HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall
from "1" to "0" will leave the screen on and falling back to the backlight/power settings)

ROOSH315 said:
3) Use the following hack (Thanks to someone who posted this already here on XDA):
Modifying the DWORD stored in:
Code:
\HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall
from "1" to "0" will leave the screen on and falling back to the backlight/power settings)
Click to expand...
Click to collapse
Thanks Buddy, that works great and everything is ok again !!!

Related

Vibrating dial pad buttons

On my old ETEN M600 (RIP) I had a phone pad app/skin that gave me big buttons and when a dial button was pressed the phone vibrated for a 1/4 of a second. It was great physical feedback to feel that little blip when a button was pressed and I believe it allowed me to dial numbers quicker. Anyone know of a app that enables this for the Tilt/Kaiser?
And yes I did a search for this before I posted a new thread.
Thanks
OT
How to set up one button press on/off with device and screen locked
Also for those that are interested. I have AE Button Plus, Ilauncher and DeviceLock by Matt Armstrong installed on my Tilt. The combination of these programs allow me to program the left softkey to turn off the Tilt. Matt's Devicelock auto locks the phone and prevents any other buttons to be pressed. When I want to use the phone I can press the left hard key that corresponds with the left soft key and that turns on the phone and unlocks it with one button push. This set up gives me one button off/on and all other keys and the screen is locked from accidental button pushes. Now I just wished that Devicelock would shut off the phone after 10 seconds if not unlocked. Right now my phone is in my pocket and if I accidentally push any button other then the left hard key my screen will turn on in a locked state and time out only after 1 minute if no other buttons are pressed. I would like it to turn back off faster.
BTW Thanks Matt
Not an app but it can be done with registry tweaking:
[It involves modifying registry keys so beware].
Navigate to HKCU\ControlPanel\Sounds\
In here there are a bunch of keys named Dtmf which represent all the keypad keys [0-9, #, *]
Rename Standard DWORD parameter Sound to Sound1
Create new String Parameter Sound
Assign value *vibrate* to this new parameter.
Save and exit, test it, then go back and do the same for all your keys, sorted.
A .cab for this?
Is there a .cab floating around for these reg settings?
It would be a great contribution to the community if someone could whip up a cab to make these reg changes ;-)
Wow, now that was usefull. I had installed some small prog to do the same, but it didn't work great. It wouldn't vibrate unless you pressed for a more than 250 ms. This mod vibrates immediately! Thanks!
someone should tell Kaisertweaks that that needs to go in
Here you go, working great on the TyTN II
That's what I'm talking about
Gizmo5148 said:
Here you go, working great on the TyTN II
Click to expand...
Click to collapse
Thanks Gizmo!
I love this place. Where would WinMo be without xda-developers???
Any chance you could upload the .cab directly instead of zipped? For some reason it won't extract on my tilt and I can't get to a PC tonight.
Thanks again.
Sure thing, here you go
Installed and it is working great. This is really a great tweak!
aren't dtmf tones what are used for things like voicemail and such? like "press 7 to delete" it recognizes the sound? does this affect that at all?
I don't think this tweak has any effect on dtmf tones. I just tried my VM and everything worked as usual.
strange...i installed this on my tilt (htc rom) and when i touched a button there was no vibrate, until about 5 seconds later, it was delayed i guess, and after that i never felt another vibrate, even after a few resets.
bump.
would like to get this working.
Will this make it beep and vibrate or just vibrate? It would be cool it it could do both at once!. Also, maybe post cab to revert back to just the sound in case anyone wants to change it back?
Mikeeey,
Try holding the number down a little longer. If you just touch it, it will display the number but not vibrate.. I had the same trouble also.
I do appreciate the afford, but shouldnt it just work when it notices a keypress, not a long keypress.
You have to hold it for a little time. Thats how it works
Gizmo5148 said:
You have to hold it for a little time. Thats how it works
Click to expand...
Click to collapse
That's how the cab file works. But when I did the registry edits as listed in the 2nd post, then it is an immediate vibrate. I used to use the cab file version. I removed that and went with the direct reg edits. Now it vibrates immediately.
jomo25 said:
That's how the cab file works. But when I did the registry edits as listed in the 2nd post, then it is an immediate vibrate. I used to use the cab file version. I removed that and went with the direct reg edits. Now it vibrates immediately.
Click to expand...
Click to collapse
Same here, works great after manual reg edit.
dalewinterstein said:
Mikeeey,
Try holding the number down a little longer. If you just touch it, it will display the number but not vibrate.. I had the same trouble also.
Click to expand...
Click to collapse
thanks for pointing that out dalewinterstein, it works for me now.
i did the manual reg edit to try and make it respond faster but it doesnt, actually the keys lighting up after being pressed dont respond fast enough to my presses, does this happen for anyone else? i mean if i hold it just a bit longer it will light up and vibrate but im normally faster than that.

Kaiser Dialpad changing to Status page

Does anybody know how to change the setting for the dialpad during a phone call? I need to have the dialpad on all the time, even during a phone call.
Thanks.
EagleClaw said:
Does anybody know how to change the setting for the dialpad during a phone call? I need to have the dialpad on all the time, even during a phone call.
Thanks.
Click to expand...
Click to collapse
Hi,
KaiserTweak can do it:
Call -> disable both "Fast Sleep" and "Sleep" options!
Try this great application, with many other tweaks!
PS: Nex time, however, use better the forum "search" feature!!
Ciao
Thanks for your help. But I have KT installed and the first two settings are disabled. The only thing it did was solve the phone going black after 10 seconds. My dialpad is still replaced by the status page. And I need to have the dialpad up all the time.
I also check the registry settings that KT changes, and they were changed. So I don't know if this is an issue with my phone or all Kaisers.
Any registry tweak that you know?
oh, i get it........you mean the keypad dont you?
EagleClaw said:
Thanks for your help. But I have KT installed and the first two settings are disabled. The only thing it did was solve the phone going black after 10 seconds. My dialpad is still replaced by the status page. And I need to have the dialpad up all the time.
I also check the registry settings that KT changes, and they were changed. So I don't know if this is an issue with my phone or all Kaisers.
Any registry tweak that you know?
Click to expand...
Click to collapse
Ok, sorry, but i didn't well understand your bug, or requirement!!
What do you mean for "Status page"??
Can you post some screenshot?
Sorry, again, dude
don't need screenshots, i understand now!
But only one question: after you start a call can you tap the left softkey and show the dialpad? if so, you would like to always show the dialpad tab, and not the status page, also when the call start without pressing any key, right??
@[email protected] said:
Sorry, again, dude
don't need screenshots, i understand now!
But only one question: after you start a call can you tap the left softkey and show the dialpad? if so, you would like to always show the dialpad tab, and not the status page, also when the call start without pressing any key, right??
Click to expand...
Click to collapse
I believe this is exactly what he meant, and I for one would like to know also.
Dom; that's exactly what I meant. 99% of my calls I make through my pbx, and because of that, I need to keep inputing numbers. The fact that I need to click on the "show keypad" on every call is annoying and dangerous (when I am driving). Yes, the show key pad is on the left corner, but it would be more convenient to have it on all the time, and when and if I need the status page, I would press the show status page button.
I am sorry I was not clear on my first post.
Thanks.

TomTom volume control

Hi all,
On my Kaiser, if I forget to unmute my phone before starting TomTom 6, I can't actually adjust my volume. The trick I used with my 8125 was to go to the Today screen and tap the volume control. On the Kaiser, touching the screen brings me back to tomtom, even if the today screen is displayed.
I remember finding a replacement exe for TomTom that unmuted the phone when it started and restored your former setting when you quit, but I can't find it even though I've searched for an hour. Help?
Thanks!
-n.
When I forget to turn on the volume, I slide open my Kaiser and press the Fn key together with the folder button (bottom right). From there, you're able to adjust the volume
But I guess it is indeed better if the volume gets adjusted automatically...
Stay0Puft said:
When I forget to turn on the volume, I slide open my Kaiser and press the Fn key together with the folder button (bottom right). From there, you're able to adjust the volume
Click to expand...
Click to collapse
??? wats the folder button???
XtreMe_G said:
??? wats the folder button???
Click to expand...
Click to collapse
It's that "Right Arrow" button. When you first press Fn (bottom left), all the blue symbols on your keyboard can be activated.
There is a blue icon of a folder on the Right Arrow key.
So press Fn and right arrow and you're in Windows again (and able to adjust the volume).
Then use your task manager to get back in TomTom.
Same problem for me with my Tilt. But, there's no folder icon on my keyboard to try your suggestion. The only way I've found is to exit TomTom, unmute the phone and start it again.
Anyone find a fix for use on the Tilt?
Stay0Puft said:
It's that "Right Arrow" button. When you first press Fn (bottom left), all the blue symbols on your keyboard can be activated.
There is a blue icon of a folder on the Right Arrow key.
So press Fn and right arrow and you're in Windows again (and able to adjust the volume).
Then use your task manager to get back in TomTom.
Click to expand...
Click to collapse
ah, i see, on the tilts, that key toggles wifi on/off
Found it!
http://www.aximsite.com/boards/gps-talk/140969-tomtom-6-volume-override-loader.html
This loader unmutes your phone when you launch tomtom, and restores your mute when you close. (it's smart about restoring the previous state, so it won't mute if you weren't muted before launching tomtom)
Incidentally, I have some useful links in my del.icio.us bookmarks tagged with 'windowsmobile'
http://del.icio.us/osunick/windowsmobile
(disclaimer: I'm a product manager on del.icio.us)
Hitting the phone "Hang up" button works to get back to the home screen.. you can then tap the TomTom icon bottom right to bring it back.
Fully
Have you tried this? Getting to the home screen is not the problem, it's that touching any part of the screen, including the volume control, puts you back in tomtom, thus making volume changes very difficult.
Is my Tilt different than your Tilt?
osunick said:
Have you tried this? Getting to the home screen is not the problem, it's that touching any part of the screen, including the volume control, puts you back in tomtom, thus making volume changes very difficult.
Click to expand...
Click to collapse
Im not sure what you guys talking about.
The FN + Arrow key works.
The hang up key works as well.
I have my windows key set as file explorer that works(perfectly).
Im usingTomTom 6. I cant recall my version.
When Im in TomTom and active my todays page. Tom Tom will minimize at bottom task bar. It lets me change just about anything.
Not sure why you guys has problem, maybe you need to install HTC taskmgr to solve this issue. Because most of my working program will minimize at bottom, so I can have fast access to it.
poisonz said:
Im not sure what you guys talking about.
The FN + Arrow key works.
The hang up key works as well.
I have my windows key set as file explorer that works(perfectly).
Im usingTomTom 6. I cant recall my version.
When Im in TomTom and active my todays page. Tom Tom will minimize at bottom task bar. It lets me change just about anything.
Not sure why you guys has problem, maybe you need to install HTC taskmgr to solve this issue. Because most of my working program will minimize at bottom, so I can have fast access to it.
Click to expand...
Click to collapse
This may depend on what build of Tomtom you have. As the OP says with some b uilds, even when you get to the tgoday screen using Fn buttons, the very next screen tap takes you back into tomtom.
However, as also pinted out above, pressing the red phone key works and you can then change the volume or any other task, BUT instead of returning to it using a Task Manager you just tap the tomtom icon that has appeared in the lower task bar.
Mike
mikechannon said:
This may depend on what build of Tomtom you have. As the OP says with some builds, even when you get to the tgoday screen using Fn buttons, the very next screen tap takes you back into tomtom.
However, as also pinted out above, pressing the red phone key works and you can then change the volume or any other task, BUT instead of returning to it using a Task Manager you just tap the tomtom icon that has appeared in the lower task bar.
Mike
Click to expand...
Click to collapse
My Tilt has the original AT&T ROM and I'm running TomTom 6.010.
The trick with the red phone key always minimizes TT6 to the lower task bar. But, I usually get dumped back into TT6 when I tap anywhere on the screen. Sometimes (rarely) it does let me unmute the speaker, but mostly not.
The Fn-arrow trick never works for me.
It's usually easier for me to quit TT6, turn on the speaker and then restart it. Of course, that means I have to wait for GPS to start up again.
mikechannon is right, some builds of tomtom allow you to change the volume once you are in the today screen, some builds will just bring you right back to tomtom with a tap on the taskbar.
for the builds that bring you back to tomtom on a screen tap, this is how i do it, hit ok or red phone button to get back to the today screen. when its at the today screen, i press the ie button to bring up ie, then you can tap on the volume icon on the taskbar.
and it doesnt have to be ie, can be just any app, you can even launch anything thats on the today screen, just as long as you dont tap on the taskbar
XtreMe_G said:
mikechannon is right, some builds of tomtom allow you to change the volume once you are in the today screen, some builds will just bring you right back to tomtom with a tap on the taskbar.
for the builds that bring you back to tomtom on a screen tap, this is how i do it, hit ok or red phone button to get back to the today screen. when its at the today screen, i press the ie button to bring up ie, then you can tap on the volume icon on the taskbar.
and it doesnt have to be ie, can be just any app, you can even launch anything thats on the today screen, just as long as you dont tap on the taskbar
Click to expand...
Click to collapse
Yes! Just tried that trick and it works great... thanks!!!
Anyone know if its the older or newer builds that allow the volume change to work properly?
You guys should really try that TTLoader app that i linked to earlier. It maxes out your volume and launches TomTom and restores your original volume settings when you leave.
osunick said:
You guys should really try that TTLoader app that i linked to earlier. It maxes out your volume and launches TomTom and restores your original volume settings when you leave.
Click to expand...
Click to collapse
I did consider using that app, but am trying to keep the number of running programs down as low as possible. I'm willing to jump through a hoop or two to accomplish that.
gavink said:
I did consider using that app, but am trying to keep the number of running programs down as low as possible. I'm willing to jump through a hoop or two to accomplish that.
Click to expand...
Click to collapse
It's a very lightweight app and doesn't actually take up space in your registry, so it has zero impact when not running and minimal impact when tomtom is running. You should try it.
osunick said:
It's a very lightweight app and doesn't actually take up space in your registry, so it has zero impact when not running and minimal impact when tomtom is running. You should try it.
Click to expand...
Click to collapse
Okay... you got me! I tried the loader and am hooked on it!
But, here's one for you. I've got a spot on my Today screen with TomTom on it (tap and the program starts). Any way you know of to get the loader to start instead? Maybe I'm missing something very easy?
Thanks!
Gavin
Sadly no, I use either Voice Command or the PTT button to start TomTom.
gavink said:
Okay... you got me! I tried the loader and am hooked on it!
But, here's one for you. I've got a spot on my Today screen with TomTom on it (tap and the program starts). Any way you know of to get the loader to start instead? Maybe I'm missing something very easy?
Thanks!
Gavin
Click to expand...
Click to collapse
Great little app, thanks.
Is there any chance of a cab install version ?
So it can be simply reinstalled when I change roms (which I do a lot).
Many thanks for this little app. It saves me getting frustrated, and having to tap on the screen while driving.
Many Thanks
Chris D.

No Today screen after calling back...

I'm currently using the HTC Rom 1.93 official release and am having an issue I can't figure out.
I haven't installed any additional software and haven't done any registry editing, the TouchFlo3d is turned off and I haven't enabled any today plugin for testing purposes.
Now when I get called and missed the call, I press on the notification icon on top of the today screen and then on the bottom left press the popup text to get into my dailer screen. There I see the person who's call I missed and press on it to get to the next screen and then press again on the caller to call him/her back.
This all works but after the conversation it gets stuck in the dailer screen and doesn't get back to the today screen. I can still press the startmenu on top and select anything I want, but it never gets back into the today screen.
I have also installed HardSPL "Unsigned-Hard-SPL-Diamond-OliNex.zip" and later on also installed "RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip", but still the issue remains.
I also get the issue with Duttys ROM and TLR's ROM.
Could anyone do a quick test to see if the issue is software related?
Just turn off (deselect) TouchFlo3d in the todayscreen settings and don't select any other plugins, then let a friend call you, don't pick up. Then after you get the notification call him/her back and check after the phonecall if you get back into yout (blank) todayscreen.
Thanks

how to switch off the "videocall" shortcut button

Just upgraded the ROM to 1.9.
prior to the upgrade, when I press the phone button, it shows me the telephone pad screen with shortcut button to choose "Contact" on the bottom-left. Now only can select video call.
Anything I can do to get the "Contact" short-cut again.
Please please help me!!!!!!!
thanks..............................
i'm sure that a reg edit somewhere will help, but tbh, why do you need to go into contacts?
using the on screen keypad in the phone screen, type the name of the person as if you were using t9.
For example, to find George, you would type 436743 and all the contacts with George in their name will be displayed. use the down arrow to highlight the one you want to call and then hit the call button.
RTFM and learn how to use your phone dude......:-(
Most of existing users "complain" about this changes and lots of discussion about this topic already. You may want to look at the following post for some solutions
http://forum.xda-developers.com/showthread.php?t=412668&highlight=upgrade
sleeeepys said:
Just upgraded the ROM to 1.9.
prior to the upgrade, when I press the phone button, it shows me the telephone pad screen with shortcut button to choose "Contact" on the bottom-left. Now only can select video call.
Anything I can do to get the "Contact" short-cut again.
Please please help me!!!!!!!
thanks..............................
Click to expand...
Click to collapse

Categories

Resources