Hi, i have been trying to upgrade my mda to the wm6 <http://forum.xda-developers.com/showthread.php?t=324632> and now my mda will not get passed the boot screen. i have tried reverting back to the tmobile 2.26 version to no avail. i have also tried using mtty to set 14 0 with no response from the device and task 23, etc does nothing either.
Anyone ever have this happen when these resolutions will not work?
Please help!!!
did you put your phone into bootloader by pressing and holding the camera then pressing the reset button?
Yes, i can get into the bootloader and load images, its just that they will not get past the boot screen on a normal boot.
dgrandestaff said:
Yes, i can get into the bootloader and load images, its just that they will not get past the boot screen on a normal boot.
Click to expand...
Click to collapse
I have seen this happen in 2 different sitations. One is that you installed software while the HTC Home Plugin is enabled on your today screen, and the other is installing 3rd party software not compatible with WM6.
My reccomendation is to hard reset the device and i you are still having the same problem afterwards, put the device in bootloader mode and flash your carriers latest rom. If that will not work then try Wizard love rom.
Also another option is to flash the button rom and then try the t-mobile 2.26 rom.
dharvey4651 said:
I have seen this happen in 2 different sitations. One is that you installed software while the HTC Home Plugin is enabled on your today screen, and the other is installing 3rd party software not compatible with WM6.
My reccomendation is to hard reset the device and i you are still having the same problem afterwards, put the device in bootloader mode and flash your carriers latest rom. If that will not work then try Wizard love rom.
Also another option is to flash the button rom and then try the t-mobile 2.26 rom.
Click to expand...
Click to collapse
He can't get past the boot loader so it's not a matter of applications errors
@ dgrandestaff
Is your phone CID unlocked? If so then try the SD card method : http://forum.xda-developers.com/showthread.php?t=276963
i have tried hard resetting hte device and reflashing with the button rom and tmobile's latest rom (2.26). They install but when i try to reboot, it just hangs on the initial boot screen.
I did run the cid unlock wizard as suggested when i started this process but i suspect that maybe that did not work correctly.
i'll try the sd method shortly and see what i get.
Thanks...
Related
i sim and cid unlocked my mda and i downgraded using lokiwiz b2 all went smooth after i downgraded the os then i installed faria's v2 the 8mb pagepool and i did a update for the radio rom after the phone rebooted. the radio version from the start up is gone... and now the mda is not reconized via active sync. the phone eventually boots up where you can access everything but right now its very slow it literally takes 1 min for the start menu to open. so far tried soft reset, hard reset, tried to force bootloader, still not reconized by active sync. what else can i do?
Have you tried going to the 3 color screen (holding the camera button and pressing the power button for a few seconds) and then running the update utility?
I'm not sure if that will work...but it's another thing to try.
LovnGrlyGrlz said:
i sim and cid unlocked my mda and i downgraded using lokiwiz b2 all went smooth after i downgraded the os then i installed faria's v2 the 8mb pagepool and i did a update for the radio rom after the phone rebooted. the radio version from the start up is gone... and now the mda is not reconized via active sync. the phone eventually boots up where you can access everything but right now its very slow it literally takes 1 min for the start menu to open. so far tried soft reset, hard reset, tried to force bootloader, still not reconized by active sync. what else can i do?
Click to expand...
Click to collapse
Did you upgrade to a 2.2x carrier ROM before installing Faria's ROM?
What are your IPL/SPL? If they are 1.05 or 1.xx then you missed the step of installing a FULL carrier rom prior to installing a custom rom after unlocking.
If this is your situation your battery will die very quickly and will not charge via the usb charger.
LovnGrlyGrlz said:
i sim and cid unlocked my mda and i downgraded using lokiwiz b2 all went smooth after i downgraded the os then i installed faria's v2 the 8mb pagepool and i did a update for the radio rom after the phone rebooted. the radio version from the start up is gone... and now the mda is not reconized via active sync. the phone eventually boots up where you can access everything but right now its very slow it literally takes 1 min for the start menu to open. so far tried soft reset, hard reset, tried to force bootloader, still not reconized by active sync. what else can i do?
Click to expand...
Click to collapse
The exact same thing happened to me. The only way I got it to work again was by reinstalling the rom by making a backup first to the memory card using rom update from the bootloader screen. It should put everything right. then from there reinstalling the original rom (in my case from the cingular site) and after that upgrading the radio rom. After you make the backup and reinstall the rom activesync will pick up your phone again. Then after that I put the aku rom. Dont put the button rom again, it'll downgrade your radio rom and you 'll be right back where you started. It'll show the spl nd isp being above 2x but dont worry. Mine works with no problems. I tried upgrading the radio rom from the button rom but it wont take and finishes either with the gsm missing or the radio or both. I find out easier to install everything from the bootloader screen. Hope that helps.
I was upgrading my MDA using the official mda update 2.26 and then the phone completely froze. When I soft-resetted the phone, it wont get off the T-Mobile load screen. I tried to hard-reset it using the voice+commanager to reset, but then it just goes back to the T-Mobile load screen. Can anyone help me? I also tried to flash the Wizard_Love on the 3 color screen but it keeps giving me error 200. Please I need your help.
wow no response to such a serous problem. I'm having the same issue I down loading and install to my storage card some files gps navi apps from the ppc freeware site. while trying the apps my device froze. I held down the power button and it didn't respond so I removed battery.but device won't lad pass the second start up screen. what do I do
collwatt said:
wow no response to such a serous problem. I'm having the same issue I down loading and install to my storage card some files gps navi apps from the ppc freeware site. while trying the apps my device froze. I held down the power button and it didn't respond so I removed battery.but device won't lad pass the second start up screen. what do I do
Click to expand...
Click to collapse
Remove the sdcard/minisd and do a hard reset.
Bricked?
Hi all,
i have similar problem like Lo0o0nG.
Tried to flash wm6 on my g3 wizard following the wiki:
Flashed the Button ROM "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM" but after rebooting the wizard stucks in the first screen with the beer glass on it - showing IPL 1.01, SPL 2.21, GSM 01.12.10 and OS 1.5.4.2.
Then nothing else happens...
Did this 6 or 7 times before with g3 and g4 phones - worked perfectly till now..
Are there any suggestions / any possibility to get my phone working again?
thx,
derHarry
If the phone is CID unlocked use the SD/mtty method to restore the full ROM image.
If it's not CID unlocked then try to unlock it with WST and reflash the ROM(s)
Thank you for your fast reply!
It's not CID unlocked, but WST can't connect to the device...
any other suggestions?
I'm sorry but WST can't connect unless the OS has booted already. I didn't realize it when answering.
I guess the only solution now is to use the commercial unlocking solution by IMEIcheck.co.uk
Thank you for your suggestions,
i think i'll replace the touchscreen from this bricked device with the broken one from my other device... so it's not that tragical
btw: how could this happen? did i something wrong while flashing?
derHarry said:
Thank you for your suggestions,
i think i'll replace the touchscreen from this bricked device with the broken one from my other device... so it's not that tragical
btw: how could this happen? did i something wrong while flashing?
Click to expand...
Click to collapse
Yes. I believe you flashed a ROM without permission (CID unlocking) or an upgrade went wrong (stopped before finishinfg) and now the bootloader 1.xx can't load the OS because the 2.xx address is different and can't be found.
cheers
I have a G4 Wizard which is stuck in Bootloader mode (i.e. the multi-colored screen).
No matter what ROM I flash onto the unit, it always reboots back into Bootloader mode. I have tried a variety of ROMS including Wizard_Love, and vanilla WM5 and WM6 ROMS.
About three days before this occurred, I had flashed TNT.1933 (Professional + HTC Home) ROM onto the unit. About three days of running TNT I noticed that the cellular radio levels were starting to act up. So I reflashed Wizard_Love with the intention of subsequently reflashing TNT on top of Wizard_Love (this is how I have always performed flashes, by layering the intended flash onto Wizard_Love, and I've never had any problems). Well, this time as soon as Wizard_love had successfully flashed (according to the update utility), my Wizard got stuck in Bootloader mode. It's been stuck since.
I've since tried re-flashing a number of ROMs with no success. The Update utility says that the flashing is successful and there are never any errors, but the Wizard itself always reboots into the multi-color Bootloader screen. I simply cannot bypass this screen.
Any HELP would be appreciated. At this time my Wizard is unusable. And, I really miss it!
xda_student said:
I have a G4 Wizard which is stuck in Bootloader mode (i.e. the multi-colored screen).
No matter what ROM I flash onto the unit, it always reboots back into Bootloader mode. I have tried a variety of ROMS including Wizard_Love, and vanilla WM5 and WM6 ROMS.
About three days before this occurred, I had flashed TNT.1933 (Professional + HTC Home) ROM onto the unit. About three days of running TNT I noticed that the cellular radio levels were starting to act up. So I reflashed Wizard_Love with the intention of subsequently reflashing TNT on top of Wizard_Love (this is how I have always performed flashes, by layering the intended flash onto Wizard_Love, and I've never had any problems). Well, this time as soon as Wizard_love had successfully flashed (according to the update utility), my Wizard got stuck in Bootloader mode. It's been stuck since.
I've since tried re-flashing a number of ROMs with no success. The Update utility says that the flashing is successful and there are never any errors, but the Wizard itself always reboots into the multi-color Bootloader screen. I simply cannot bypass this screen.
Any HELP would be appreciated. At this time my Wizard is unusable. And, I really miss it!
Click to expand...
Click to collapse
Have you tried a hard reset?
derkesthai said:
Have you tried a hard reset?
Click to expand...
Click to collapse
Yes, I've tried several hard and soft resets. It still gets stuck at the multi-colored Bootloader screen.
I have had this same probllem with my 8525 atleat 4 to 5 times. The only thing that worked for me was to download the most recent flash for my phone from my carrier. At that point no more problems, I can then flash any ROM I want from there.
a2612596 said:
I have had this same probllem with my 8525 atleat 4 to 5 times. The only thing that worked for me was to download the most recent flash for my phone from my carrier. At that point no more problems, I can then flash any ROM I want from there.
Click to expand...
Click to collapse
Thanks, I thought of that as well. The phone is a T-Mobile (US). Unfortunately, I have been unable to find a copy of the original ROM. The ROM is no longer available on XDA-Developers FTP server and both the forum and wiki links are broken. Also, I can't get it off the T-Mobile web site since it asks me for a T-Mobile phone number, which I do not have. Here's the T-Mobile download page:
http://www.t-mobile.com/wmupgrade/
Does anyone have an alternate download address for original T-Mobile ROM? Of can someone with a T-Mobile phone number download the file for me. Thanks.
URGENTLY looking for a copy of the original T-Mobile (US) ROM - either WM5 or WM6. I'm stuck in Bootloader mode and I'm advised that reloading the original ROM might revive my Wizard.
Here's the T-Mobile download link, but it asked for a T-Mobile phone number which I do not have (I'm not a T-Mobile customer):
http://www.t-mobile.com/wmupgrade/
try here:
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
here:
http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html
I cant flash back the official rom? Im also stucked with the bootloader. It says connection error. But there is a USB display in the lower left side of the bootloader. Can anyone there can tell me how to do it?
xpxj said:
I cant flash back the official rom? Im also stucked with the bootloader. It says connection error. But there is a USB display in the lower left side of the bootloader. Can anyone there can tell me how to do it?
Click to expand...
Click to collapse
what connection error it exactly displays ?
i need some serious help im desperate at this stage.
ive basically got a htc tytn ii on uk orange
i update the rom to htc standard one which sim locked it
i followed the instruction on how to get it like i got it from orange
which i believe was sucessful. but because it was still sim locked i
thought the hardspl was relocked so i ran that again which failed and ended up on the tri colour screen after which i tought it may still be hardspl locked
so i tried to flash it with the rom again it got to 17% then crashed
now my phone will only boot to the tricolour screen it wont load activesync and if i try a flash it with anyrom it either stays at 0% gets stuck or gets to 1% then the phone restarts.
ive buggered the phone up proper i need some help if there is any for this mess
when i try a rom upload it says error [294]: invalid vender id
this update utility cannot be used for your pda phoe please check your update utility
Did you install Hard SPL?
http://forum.xda-developers.com/showthread.php?t=334679
See if you can install that and then try to reinstall your rom.
this required activesync to be green mine will respond to usb but not activesynce so i cant go any further with the hardspl unlock im stuck on the tricolour screen. and flashing will only go to 1% then restart and the message come up again.
same problem
i have the same problem and i can only get to 1% . i have tried to flash it with several roms using diferent utilities and none seem to work i used hard spl the first time when it failed. HELP PLEASE !!!!!!!
found solution
got mine working here is what i did
run mtty select usb after disabling it in activesync
press enter and you should see cmd>
type boot and when your device restarts it should start in your old rom
run hardspl again
then you need to reinstall your rom
although a word of warning my phone became sim locked after this
worked a treat many thanks it is sim locked just have to wait for the sim unlock for it now
willbyrne said:
got mine working here is what i did
run mtty select usb after disabling it in activesync
press enter and you should see cmd>
type boot and when your device restarts it should start in your old rom
run hardspl again
then you need to reinstall your rom
although a word of warning my phone became sim locked after this
Click to expand...
Click to collapse
no worries
yeah no worries, i was affraid when i locked mine i might have to return it and get anothe orange version but i used some company online and got my code in about 3 days.
oh yeah you will probably need to enter the code in twice, mine said simlocked and then network locked but it was the same code
So i just attempted to flash my tilt.
These are the steps i did.
Used Jump SPL 1.56 Kais
Then flashed a Kaiser Custom RUU.exe
everything was good at this point.
I then attempted the Kaiser SUperCID tool
when i did the unlock radio is when the problem occurred. After initializing and completing the screen turned black and does not display anything after the 3g sreen. I have done several soft resets and am attempting to do a hard reset with the soft keys but all it does is restart the phone....
i am not able to do a hard reset via sys>clear storage since no screen is displayed
this is what my phone does show
the tri color screen is this
kais1*0
spl-3.28.Hard
cpld-8
and it says security unlocked above all of that.
The ATnT screen shows this
R 1.70.Olinex
G 25.65.30.04h
D 1.62.00.00
please help
You need to follow step 0. Too late know. Which includes having an actual "RADIO" ready.
1.70OliNex is not a Radio. Thusly the Device can't load the Phone. Find a Radio and Flash it
Oh And Count this as your Freebie. Next time Search for your answer. And if you don't find the answer this should have been posted in the SuperCID thread.
Thank you kind sir. Off to look for a radio
Ghxoxst said:
Thank you kind sir. Off to look for a radio
Click to expand...
Click to collapse
Before you go off.
Here's something to try. The SIM/CID Unlocker do not work with the stock rom and you should have put hardspl on there.
Setup activesync and make sure that it detects your phone. As long as activesync works, you should be able to flash the stock rom and radio on the phone (even if the display is blank).
1st use jumpspl
then put on hardspl (read and follow the hardspl instructions)
then upgrade to 6.1 ROM
Then Unlock
then reflash with the rom of your choice with the matching radio
you should be good to go.
well i finally figured out the hard reset, which i did. It booted up and i was able to do the screen alignment etc, but once i was on my actual home screen it CUSTOMIZED and loaded a bunch of who knows what and back to the blank screen...
well i do have hard spl 3.28. I will try again....Im also not sure if my phone is 6.0 or 6.1
Ghxoxst said:
well i finally figured out the hard reset, which i did. It booted up and i was able to do the screen alignment etc, but once i was on my actual home screen it CUSTOMIZED and loaded a bunch of who knows what and back to the blank screen...
well i do have hard spl 3.28. I will try again....Im also not sure if my phone is 6.0 or 6.1
Click to expand...
Click to collapse
If you have hardspl on there, then just flash one of the cooked roms on the phone. I loaded the L26 Rom and it works great. It will include a radio firmware and is compatible with the SIM/CID unlocker.
the question i have is how do you flash without being able to execute the program from the phone? How am i able to execute it from the active sync?
Ghxoxst said:
the question i have is how do you flash without being able to execute the program from the phone? How am i able to execute it from the active sync?
Click to expand...
Click to collapse
Have you connected it to the computer via usb? Does activesync see the phone? You won't see anything on the phone itself until you correct the problem. As long as the computer activesync sees the phone you should be able to flash it from the computer.
I had the same issue
Just follow the steps
get the SIM unlock code from the computer
then flash a "real radio"
Once it finishes and boots up
it will ask you for the sim unlock code
AND VIOLA!!!
got it going
flashed it from my mini sd card after fat32 formatting it.
works like a charm
Thanks to everyone