my 8125 started acting up a week or 2 ago, had been on summiters 2.17 rom for ages & figured it was time to upgrade. I gave xda wm6 release 3 lite a try after flashing with tmob 2.26. problem is i still have the same issue, now i am stuck between htc knight, xda wm6 spash screen & wm6 splash screen, just goes thru those 3 splash screens then dies & does it again over & over. the only way that i can get to the today screen is to have it plugged into the ac adapter.
any ideas?
thanks!
Related
hey i have a o2 xda iis and i havent used it for sometime and found it in my draw the other day i gave it a full charge and then it wouldnt boot past the colored bars screen so i dled a wm5.0 rom and loaded it, it loaded foine but same thing wont pass the bars screen, also directly after the update i did the 2nd and 3rd option int he list yes thing but it goes all white and will stay like that as long as you leave it, so it wont booot past th colored ars the rom and radio and everything display but thats it..any help
tx in advance..
I recently used Faria's How to and unlocked my phone, loaded his crossbow rom etc. My phone works flawless.
Now i am attempting to do a friends 8125 (g3)as well. Ive followed the how to exactly and im having a small problem. The first time i tried to downgrade to the buttons 1.05 rom, it froze up. I rebooted, and tried again, its hanging up showing 99% on the PC and 98% on the 8125 and WILL NOT MOVE. I also of course can not get an activesync connection due to the fact that the only screen i get on the 8125 is the 3 color screen. Anyone have any ideas? Quick responses would be greatly appreciated!
When applying ROMs sometimes it appears to stop at 98 or 99% but it isn't. You have to wait for a while - up to 10 minutes I suppose (worst case).
The three color screen is fine. Plug in your USB and the letters "usb" should show in the lower left hand corner. Start your ROM upgrade when you see this.
Let us know...
I have just been trying to upgrade my Wizard, I have done this many times before, I tried but failed with a few ROM's and last I tried Molski's latest, now, it is just dead, after I try a hard reset, I get the red blue green screen for a few seconds, I even see it connecting to the USB and then the screen just goes black.
Pleas help with anything
Sounds to me you're battery could be empty/dead
It was full last night, so I do not think this is the problem
It was full last night, so I do not think this is the problem
Try another battery and see.
And keep us posted
I agree, it sounds like your battery is drained. And since it goes to the boot loader, that means your battery will not charge on your phone. You'll have to borrow a battery that is charged, or get someone to charge your battery.
azmerlin said:
It was full last night, so I do not think this is the problem
Click to expand...
Click to collapse
What state did you leave the phone in over night? Was the battery removed, or was the phone fully off..?
Interesting. I seem to have a similar problem. I only get the boot loader screen.
But i can establish a USB connection and update my phone. It will go all the way to 100%. Then the phone will switch off and start new. But instead of loading the OS it goes automatically into the boot loader screen.
Any idea what went wrong here?
lingley said:
Interesting. I seem to have a similar problem. I only get the boot loader screen.
But i can establish a USB connection and update my phone. It will go all the way to 100%. Then the phone will switch off and start new. But instead of loading the OS it goes automatically into the boot loader screen.
Any idea what went wrong here?
Click to expand...
Click to collapse
Since you haven't told us what you were trying to do when this started, what rom you tried flashing, and what your current IPL / SPL are and whether this is a G3 or G4, no, we don't have any ideas on what is wrong .
Read and follow this:
http://forum.xda-developers.com/showthread.php?t=298613
I would suggest you try flashing your carrier's latest official rom to get a working device back.
Bricked
If install IPL 3.08 in G4, exist solution or not
One thing to add : if the battery is really low, then it will likely not charge or respond via USB. It is necessary to use the wall charger in this case. It must have something to do with the amount of charging current that can be delivered to a flat battery.
luisprieto said:
If install IPL 3.08 in G4, exist solution or not
Click to expand...
Click to collapse
I'm not sure if you are asking a question or what. But if you try to install IPL/SPL 3.08 on a G4 device, your device will be bricked (ie: dead). I did see where someone in the Wizard forum said they were able to do a JTAG recovery and get their G4 back.
mfrazzz said:
Since you haven't told us what you were trying to do when this started, what rom you tried flashing, and what your current IPL / SPL are and whether this is a G3 or G4, no, we don't have any ideas on what is wrong .
Read and follow this:
http://forum.xda-developers.com/showthread.php?t=298613
I would suggest you try flashing your carrier's latest official rom to get a working device back.
Click to expand...
Click to collapse
You are right, sorry.
I used to have Aserg3.12 Rom on my device (G4). It worked well for at least two months. Suddenly the phone crashed in the middle of a call and didnt react anymore. Hard Reset nothing worked.
I got somehow the Boot Loader Screen back and downgraded to the original rom (QTEK novid, 220734, 2207114). Problem was whilst it finished the upload process until 100% and restarted the phone, it got stuck at the OS loading page. After 1 minute the screen started losing its colour and turned white. If I soft or hard reset the same happens, it turns white at the OS loading page.
At some point I got through miraculously, it started up and everything was fine. I charged it, upgraded to smart1 wm6 v2 and everything seemed to work. However again some 10 minutes into a call, the phone crashed and back to square one. Downgrade to old rom, got again stuck at OS loading screen etc.
I then put it over night on the charger. The orange charging LED was blinking in 5-10 sec intervals. In the morning it was red. I started the phone again interestingly got through and got it running. Battery was fully charged. But again: 10 min into a call, the phone crashed. And trying to reboot I get to the OS loading screen, then it turns white. I put it back on the charger LED is blinking, guess I have to wait again for some hours.
Thanks for any help or suggestion,
forgot that:
IPL 2.15.0001
SPL 2.20.0001
Aserg3.12? smart1 wm6? Are you sure you've got a wizard? Aren't those prophet roms?
I have a big problem.....
My phone hung this morning on the alarm. It kept on going. So I turned off the phone. A few hours later I booted up the phone again but it didn't boot to the os... it is stuck in the 3 colored bootloader screen
I tried reflashing the original WM6.1 rom. It worked.... until the cusomization had ran. After the customization reboot there was the bootloader again.....
Can anyone help me on this?
Info in the bootloader screen is as folows:
KAIS130
SPL-3.29.0000
CPLD-8
USB
Please help!!
First thing I'd do, is a bulk standard Hard reset on the phone. if it crashes again on the customise, then hard reset again, and soft reset before the customise kicks in.
alternatively, if you're happy to try a custom ROM, then flash it to a new one.
if these dont work, then its time to approach HTC, and see if you can get it repaired...
I allready did a hard reset after flashing my tytn and a soft reset before getting the customization screen. But every time it boots up and it wants to configure my phone. So I cannot get arround the cusomization
While re-flashing my TyTN II to the Orange WM 6.1 Test ROM I did the reset before the customisation...and what happens the phone resets itself to default. It seems that the operators have found a way to make sure that their customisations are added.
Mine is purchased without a account. So there should be no provider **** on it..... It's a realy weird problem though....
Could it be dirt??? I left the battery out for a few hours and it works for a short time. Putted my sim card back in and it stopped working. Reboot and it worked again for a short time but after te next reboot its over again and it wil not come back again. I now plan to leave the battery out for the night see how it is in the morning...
Anyona an idea (bump)
I've got the same problem.
Although I'm able to restart successfully the Kaiser randomly.
If you pay attention to the tricolor screen... it blanks the screen for a very short moment. Precisely in that moment, a message is written in the screen
" No imgafile file found! "
And then went back immediatley to the tricolor screen.
My Kaiser is HTC orginal, updated with the original HTC ROMWINDOWS MOBILE 6.1. I did not nothing special to it, I treated always it carefully... It seems a random Hardware problem. HTC is an awfull brand.
Now I have to go to HTC service... they will get my phone for a couple of months at least.... and I know (from previous experiencies) they work very very badly (they can give your phone back even broken!!)
Conclusion... HTC never more.
Did have the same problem. Asked and RMA to HTC. Shipped the phone on june 30th. Phone came back repaired yesterday !
This morning... the %$* red green blue reappear when I soft reset the unit.
Not very reliable, will have to buy another phone.
Guys,
I'm in front of a peculiar problem in my HTC Touch diamond; it started around 2 weeks back when I powered on the device it got stuck up at the point where it displays "Touch Diamond" in white fonts in black background...normally, after this point the version details flash in red font at the bottom right corner... But in this case it's getting stuck up at this point not displaying the version details like R 1.09.25.23 …. etc.
assuming that the battery charge is low, I put the device on charging, then after flashing the centre (round) button white light twice or thrice, the device start reboot again and again got stuck up at the "Touch diamond" point, if I continue to charge the set, this cycle starts repeating endlessly.
Then, to check, I got the battery charged in an external charger for 24 hours, and also procured a thick battery (Model. DIAM171, Rating: 3.7 V DC & 1340 mAh) too, and kept the device open for 48 hours or so. The device started smoothly and was functioning well for next ten days.
Then this insect called "new ROM" started biting my brain (?), and at first I had flashed an unsigned hardSPL v1.40 Olinex. Then Radio 1.09.25.23 and then the Sone wwe 2.1. All the flashes were done individually, and successfully.
And by the way, I'm no monkey to this flashing thing too, of course, the courtesy and credit goes to the whiz kids of XDA-Developers for the learning imparted on me. Earlier I'd flashed i mate KJam, then HTC ARTEMIS successfully too.
But, alas, after running the new rom nicely for a few calls, and after one more soft reset, it has come back to square one. That is, "when I powered on the device it got stuck up at the point where it displays "Touch Diamond" in white fonts in black background...normally after this point the version details flash in red font at the bottom right corner... But in this case it's getting stuck up at this point not displaying the version ......"
Please help...friends.... plzzzzzzzzzzzz...help....
By the way, the device is going to the Bootloader smoothly on pressing the volume down button while soft reset.
I tried hard reset the device by pressing the round button and the volume down button while soft reset the device and did hard reset it successfully. Still the problem remains.. plz buddy, plz help...
Yep, found your post...after replaying to ur PM
But I'll post here my answer in case that anyone else could also been interested in it:
"Sorry to hear this issue, although I haven't seen this post in the forum...
Ok. based on your story I think that this issue has nothing to do with the cooked rom you've flashed.
It seems more like an SPL problem. I'd suggest to flash the latest HSPL, the 1.93 one.
Till now none complained about such kinda issue... They bricked the phone or they didn't...But such kind of intermediate behavior never heard...
An other suggestion, try to flash with a branded ROM (try downloading the latest official for ur device).
Waiting for ur feedback.
Good luck!"
at last my Diamond is working again...
Warm regards to Shaks1979 & SeatOne for ur kind and quick response... anyway, my diamond is working again......Yeterday... I had started flashing the Radio... earlier the Radio version was 1.00.25.03 (that came with my phone from the factory) which was upgraded to 1.09.25.23 as the ROM Cooker i.e. Seatone is too using this radio ( SONE v.2.1 WWE by SeatOne)
Yesterday, I flashed the Radio version 1.00.25.05 and the phone started working again.
Guys, as soon as the phone started working, I had flashed two more roms, just to understand what went wrong, & the ROMs are (v6.4FullHDTFl by christonge) and (XBMOD_V2 by xboxmod). The flashings went smoothly. At this moment my phone is on XBMOD_V2 Rom & Radio 1.00.25.05.
After seating back, I tried to understand what went wrong, why the phone was not going beyond "Touch Diamond" display point (in white font) and getting stuck up at that point before the R.... G..... etc version details appear on the screen with font colour red and background black.
The problem was with the Radio 1.09.25.23; but the mechanism of the problem went tangentially above my head, I'm in total darkness. Guys, can anyone of you genius can throw some light.
I shall wait for your inputs in the matter.
I have the same problem. After rebooting ok it goes to start up and gets stuck at the touch diamond screen with info about the radio and stuff in red. It won't turn on for me to re-flash it.
So you just fully charged it and left it a while without the battery in then tried again and it worked
Any help would be great... 8-s