Anyone got this to work? I can't seem to get good link to install. It says that it's not supported. However, I know good link supports WM5? Anyone know of or have a work around for this?
I did a search under "audio" and "search", and couldn't find anything or suck at searching.
I'm using the AT&T Tilt which I did the WM 6.1 upgrade minus bloatware and am running KaiserTweak. Other than that, everything is factory.
I can talk on my phone just fine and it rings without issue, but all other sounds are muted. The alarm only vibrates even though sound is also selected, no sound for music, no ques on my bluetooth (ie, "Say a command"). I'm sure it's something easy and I'll feel stupid, but can anyone help me out?
In addition, my display will dim and the only way to brighten it again is to blank the screen and then turn it back on (I haven't searched this yet).
Thank you very much, Peter.
PeterB1234 said:
I did a search under "audio" and "search", and couldn't find anything or suck at searching.
I'm using the AT&T Tilt which I did the WM 6.1 upgrade minus bloatware and am running KaiserTweak. Other than that, everything is factory.
I can talk on my phone just fine and it rings without issue, but all other sounds are muted. The alarm only vibrates even though sound is also selected, no sound for music, no ques on my bluetooth (ie, "Say a command"). I'm sure it's something easy and I'll feel stupid, but can anyone help me out?
In addition, my display will dim and the only way to brighten it again is to blank the screen and then turn it back on (I haven't searched this yet).
Thank you very much, Peter.
Click to expand...
Click to collapse
What Radio version are you using?
Try upgrading to a WM6.1 Radio (or a different version).
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Ta
Dave
Now for my next trick an even stupider (is that a word) question --- How do I tell what redio I'm using?
I'm reading threads about Radios and the different versions available, but I still haven't found how to determine which one I'm using.
Thanks
**** Edit, never mind, I found it. I'm using 1.65.21.18 on ROM versin 3.57.502.2 WWE
PeterB1234 said:
Now for my next trick an even stupider (is that a word) question --- How do I tell what redio I'm using?
I'm reading threads about Radios and the different versions available, but I still haven't found how to determine which one I'm using.
Thanks
**** Edit, never mind, I found it. I'm using 1.65.21.18 on ROM versin 3.57.502.2 WWE
Click to expand...
Click to collapse
That should be OK.
Have you done Hard SPL, if so try some of the other Radios, they might work
Ta
DAve
I'm not sure what HardSPL is ... Noob.
I'm also searching to see how you install a new radio. There are just so many posts here that you have to search through pages of search result after search result to find this stuff.
I'm looking at going to the 1.65.24.36 radio, but I've read that you have to have HardSPL, which I still don't know what that is, and it says its the NIKI network, and I don't know if that means I can't run it on the AT&T network.
Confusing and overloading at the same time.
PeterB1234 said:
I'm not sure what HardSPL is ... Noob.
I'm also searching to see how you install a new radio. There are just so many posts here that you have to search through pages of search result after search result to find this stuff.
I'm looking at going to the 1.65.24.36 radio, but I've read that you have to have HardSPL, which I still don't know what that is, and it says its the NIKI network, and I don't know if that means I can't run it on the AT&T network.
Confusing and overloading at the same time.
Click to expand...
Click to collapse
Hehe
Hard SPL allows you to flash you phones ROM with Images other than the ones provided by your carrier.
Installation instructions in Post #2 here: http://forum.xda-developers.com/showthread.php?t=396922 You will probably be best with 3.56 version.
Flashing a Radio help is here:http://forum.xda-developers.com/showthread.php?t=393182
If the Radio is listed in this thread and is for the same WM version it should work. All the other info is where it was ripped from, it only goes in the thread if it works.
However, all that aside, if you have just upgraded the ATT stock ROM, none of that should be needed. Can you re-check all of the Sound and Volume options in Start>Settings and the Drop down from the volume option on the today screen.
Thanks
Dave
DaveShaw said:
Hehe
However, all that aside, if you have just upgraded the ATT stock ROM, none of that should be needed. Can you re-check all of the Sound and Volume options in Start>Settings and the Drop down from the volume option on the today screen.
Click to expand...
Click to collapse
Yes, it's just the stock WM 6.1 ROM. I'm not interested in being a power user, I just want the very basic improvements. This may change down the road, but everything with the exception of sound works great.
In the Sounds & Notifications settings. Events, Programs and Notifications are checked but not Screen Taps or Hardware Buttons. When I click on the "Speaker" icon, both the device and phone settings are at max and on.
I dunno then, maybe another ATT user will come along and have some more help, sorry
Dave
Thanks Dave, I appreciate your help. I'll probably just hard reset it and see what happens. Thanks again.
Maybe the bloatware install was interrupted to early?
PeterB1234 said:
I'll probably just hard reset it and see what happens. Thanks again.
Click to expand...
Click to collapse
Absolutely a good idea, especially if you've just upgraded ROMs (always a good idea to do a hard reset after a ROM upgrade anyway as a matter of course). If you interrupted the configuration/bloatware install at the wrong place, that may explain why some of your sounds aren't working also. Try the full uninterrupted install, test the sound in all the areas where it currently doesn't work properly, then work backwards doing another hard reset and interrupting it at the 'right point' until your sounds are there but not the things you don't want.
The OP was 100% correct. He sucks at searching.
Hey m8 i have a same problem as U! I tryed everything but nothing. I dont know how to solve this one. I also tryed every fck version of radio and even original htc OS. I also tryed with hard reset but didn't help. I also have topic in General area - Sound problem - DEATH! so...u are not alone
kimtyson said:
The OP was 100% correct. He sucks at searching.
Click to expand...
Click to collapse
Yeah, but at least I'm not posting stupid comments just to try to boost my post count.
------------
Hard reset worked, so I'll just hope it's not reoccurring.
Ive tried many different roms and many different radios and still havent found one that works great. most of the problems i have is with the keyboard for some reason on certain radios my keyboard will lag and different keys will not work all the time. and the weird thing is that if i change the radio it changes what keys work and dont work. i recently tried the newest rom and radio released on the htc website and that didnt help. another question can i download the rom for the htc tytn 2 from the website and flash it on a att tilt? thanks again for the help
crackzattic said:
Ive tried many different roms and many different radios and still havent found one that works great. most of the problems i have is with the keyboard for some reason on certain radios my keyboard will lag and different keys will not work all the time. and the weird thing is that if i change the radio it changes what keys work and dont work. i recently tried the newest rom and radio released on the htc website and that didnt help. another question can i download the rom for the htc tytn 2 from the website and flash it on a att tilt? thanks again for the help
Click to expand...
Click to collapse
Sometimes you need to change language when flashing certain roms diffrent from stock, if not match youre HK will be remaped to whatever the flashed ROM tells it todo . Example:
I am Norwegian so I have to change Curlang to 414 (414 Hex, 1044 Dec). I do this by searching up Curlang in my register (should be in: HKLM/Hardware/Devicemap/Keybd), then I Soft Reset. DONE! My Keyboard is now supporting ÆØÅ and all the oter keys and so on, just as I am used to on Norwegian Shipped/Stok Roms.
There are floating alot of curlang cabs for the diffrent phones in here, dig in or perhaps someone will post it for you.
its not just the mapping its just the keyboard wont type a letter unless i press it like 3 or 4 times. and im pretty sure its the radio and not the keyboard because if i change the radio different keys are effected. i no it sounds weird but im sure its not the keyboard or the mappings
crackzattic said:
its not just the mapping its just the keyboard wont type a letter unless i press it like 3 or 4 times. and im pretty sure its the radio and not the keyboard because if i change the radio different keys are effected. i no it sounds weird but im sure its not the keyboard or the mappings
Click to expand...
Click to collapse
I would deffently reflash to stock ROM asap! If its not rom/radio related I would suspect you got some fluid under HK? By the way you say diffrent (like in random?) keys ad affected makes me suspect its HW related if its really not as simple as radio. The remap should be the same on same country ROM`s for you, and the mapping is done in the register. If its radio related, you whole device should act strange and dodgy IMO.
ya i get what ur saying but when i use my gfs att sim card she doesnt have any problems only with my tmobile sim card
crackzattic said:
ya i get what ur saying but when i use my gfs att sim card she doesnt have any problems only with my tmobile sim card
Click to expand...
Click to collapse
Kinda relevant information, you shoulda sticked in there first place my friend Tmobile I have no experience on radio to share. Think you need to dig into radio treads as its probobly then as youreself concluded radio related. Just try combine diffrent roms -> radio until you find a good match then take notes of the given radio. I would also search more for other Tmobile comments on radio issues from the memebers.
Dont know how updated this is but belive you can take it for a spin: [4 December] The Ultimate Radio Thread
i have searched and it seems like noone has shared their tmobile radio experiences. ive been fooling with this phone all night and i may have a conclusion. i used jockeyw's unlock method and i believe my hardspl isnt upgraded to the 3.29 or 3.56 like the new roms require. i have tried to upgrade and still wont change my bootloader info. on my tricolored screen the 2nd line says "SPL-1.0.OliPof" which i am assuming is SPL1.0 not SPL 3.29. this is very frustrating because i cant change it no matter what hardspl i do. i even tried this post http://forum.xda-developers.com/showthread.php?t=354061 and it still didnt help. i think this is all the info i can come up with i hope someone can help
Some SPL Wiki reading called for
crackzattic said:
i used jockeyw's unlock method and i believe my hardspl isnt upgraded to the 3.29 or 3.56 like the new roms require.
Click to expand...
Click to collapse
So if you're using a Windows Mobile 6.0 compatible SPL (version 1.xx) with a WM 6.1 ROM that can give a host of problems, including freezing. I used this SPL Questions part of the wiki to change from the OliPof 1.0 SPL to a HTC 1.93 SPL the other day and using JumpSPL1.93-KAIS.exe it worked fine so there's something you're not doing right. If you describe what happened after you tapped Kermit, (including any RUU error messages) it may help us diagnose whats going on. I suggest you re-read that part of the wiki as well as this is getting a bit spoon-feeding-ish (which xda-dev is not about).
I have Hard SPL 3.56 and use KAIS_Radio_1.70.18.02 with PDA_Corner Ultimate X Beta II (ROM). My average download speed via tethering is now about 27 KB/s. It used to be only about 20 to 22 KB/s. Also make sure that you install the Tilt keyboard fix cab that is on the WIKI page if you are using a Kaiser ROM on an AT&T Tilt.
I have all of my internet settings correct to use Tmobile with my kaiser yet I still get the Http Error:504 what gives? any advice guys? thanks for the help!
What did search come up with?
Searching brought up the settings and a few cab files none of which seemed to solve the issue. But after flashing to an HTC rom from the ATT rom it autoconfigured the settings and all is well.
I just unlocked and flash my sprint touch diamond with MightRom wm6.5 and I must say its pretty sweet. The only problem that i have is indicated in the title. I use google maps and in 6.1 i used to go to menu and hit gps and it would get gps and give me my location. But after the update it just keeps searching for a gps signal and can never find one. Any thoughts?
Also i tried googling it and looking through multiple forums and the only thing ive come up with is people that have verison say that you have to turn location on in settings but i dont know how to do that...and im not sure if this applies to me or not.
thanks
Same Probelm
I have searched ppcgeeks and cannot find a solution. A few users are experiencing the same problem with MightyRom6. I tried to enable GPSone settings in QPST with no luck. Any help?
clevertrevor777 said:
I have searched ppcgeeks and cannot find a solution. A few users are experiencing the same problem with MightyRom6. I tried to enable GPSone settings in QPST with no luck. Any help?
Click to expand...
Click to collapse
Yes, go to settings and make sure location is set to On. You could also enable AssistedGPS in the registry with a 32KB log file to help.
If you have QuickGPS installed then use it. If Mighty excluded it then I suggest you get it.
Also, did you change radio's when you upgraded? If so you may need to flash back to the radio version you had before. Make sure you have the latest PRL update as well.