Related
Does anyone else have this issue? I set up 3 or 4 speed dials, when I next try them, maybe a day later, they don't work... they've all vanished again!
Anyone have any ideas why?
Did you get an answer for this? I have the same problem. What rom are you running? I'm running Duttys v4
No not yet... I have the original Orange ROM I think. I guess this maybe means its not so much ROM related as Kaiser related?
Well until I flashed my rom to duttys v4 this didnt happen. Ive run a couple of other versions of duttys roms and this hasnt been a problem. i have read a few posts on the v2/v3 thread saying that you need to turn on touchflo through the ftouchfloconfig and then use the cube to add your speed dials. obviously this doesnt apply to you as your not running a rom with the cube in it but it didnt work anyway.
I wonder if its related to the radio? I wouldnt have thought so cos i believe the radio only deals with calls, wifi etc but just noticing were both on uk orange and I still have the original radio (1.27.12.29), which radio are you running?
Anyone have any ideas on this??? its pissing me off now!
load your speed dials thru your cube. power down power back up. all fixed.
Great that worked thanks. I could have sworn I'd already tried that. Oh well, im an idiot! Any ideas why it doesnt work on AndyCr15's device? He has original orange rom. You could always just flash it I guess, original Orange rom is ****e anyway compared to the custom roms you can get on here.
benl2k said:
Great that worked thanks. I could have sworn I'd already tried that. Oh well, im an idiot! Any ideas why it doesnt work on AndyCr15's device? He has original orange rom. You could always just flash it I guess, original Orange rom is ****e anyway compared to the custom roms you can get on here.
Click to expand...
Click to collapse
To be completely honest. I have no idea. I am not familiar with the orange roms.
I have no problem flashing my device, I did it several times with my old Universal. Can you advise what would be a good one for me? I tend to prefer simple but fast ones.
one of duttys lite roms then in that case. ive only tried duttys but from what everyone says, theyre the best anyway. make sure you only flash your rom and not your radio or get your phone sim unlocked cos theres problems with blocking the phone when flashing radio on orange phones. theres a thread on flashing orange kaisers somewhere on here. and if you go to the dutty v4 thread you should be able to find the link to all his roms and other cab files in the first post.
http://forum.xda-developers.com/showthread.php?t=357592&highlight=orange
Dear developers..
Is there a possibility that I can downgrade my radio firmware from 1.54.30.10 to let's say 1.54.01.00 or whatsoever?
I tried dozens of methods but non worked, spend 10+ hours on this forum.. none worked.
My specs:
Treo 750 unlocked
Windows Mobile 6 (previously 6.1 normal version)
Radio: 1.54.30.10 (Hermes one)
IPL 0.20
SPL 1.40
Netherlands / T-Mobile
And is it possible to rollback to the official Palm Bootloader? In case I have to send it in for repair.
Many many thanks in advance
Bump Im Stuck With This ****ty Radio!!help!!!tried Everything!!
I guess nobody knows (so far) how to downgrade from Hermes radio. I guess the only way is to directly flash via JTAG - if you can find the right pins in your Treo. I.e. something like the one discussed for Hermes in http://forum.xda-developers.com/showthread.php?t=391047
There are a couple of threads going on about this now and some people have reported success, but I am a little skeptical (sorry mates) they were actually at this firmware level as I have yet to successfully downgrade my radio...spent hours flashing, reflashing various OS ROMs, radio ROMs, even made my own radio ROM extracted from ATT 2.25 update, via various bootloaders, SPL, and on and on. So I have given up and hope the official WM 6.1 update rumors come true and it contains a refresh radio and can actually over-write.
Having said this, I am pretty stable using 1.54.30.10 alongside the normal/generic WM 6.1 ROM
i was able to downgrade my unlocked and hardspl'ed 750 from 1.54.30.10 to 1.54.07.00. i had to use the palm recovery tool that was extracted from Treo750_2_27_ROW_EN_DesktopUpdater.
there's a thread on it, but basically, ran the recovery tool, then flashed the 2.27 ROW EN update, then updated it with a radio-less 6.1 ROM. after the ROW update, the radio version was 1.54.07.00, which worked much better with ATT
tmknight said:
There are a couple of threads going on about this now and some people have reported success, but I am a little skeptical (sorry mates) they were actually at this firmware level as I have yet to successfully downgrade my radio...spent hours flashing, reflashing various OS ROMs, radio ROMs, even made my own radio ROM extracted from ATT 2.25 update, via various bootloaders, SPL, and on and on. So I have given up and hope the official WM 6.1 update rumors come true and it contains a refresh radio and can actually over-write.
Having said this, I am pretty stable using 1.54.30.10 alongside the normal/generic WM 6.1 ROM
Click to expand...
Click to collapse
What exactly is wrong with this radio? I like it better than the ATT WM6 one simply b/c I've had less issues and the earpiece is MUCH louder.
Merlyn_3D said:
What exactly is wrong with this radio? I like it better than the ATT WM6 one simply b/c I've had less issues and the earpiece is MUCH louder.
Click to expand...
Click to collapse
with ATT here in NYC, i had issues with 1.54.30.10-- it would drop the signal and a reboot would be needed to get it back. or if you went underground, and came back up, it would not grab a signal for a few minutes, i would have to turn the radio off then back on to get reception.
the problem went away with 1.54.07.00
hi
NYITGUY said:
i was able to downgrade my unlocked and hardspl'ed 750 from 1.54.30.10 to 1.54.07.00. i had to use the palm recovery tool that was extracted from Treo750_2_27_ROW_EN_DesktopUpdater.
there's a thread on it, but basically, ran the recovery tool, then flashed the 2.27 ROW EN update, then updated it with a radio-less 6.1 ROM. after the ROW update, the radio version was 1.54.07.00, which worked much better with ATT
Click to expand...
Click to collapse
couple of questions:
bi differance from your old radio to the new one? where are you located on the at&t network?
if much better, can you give me a detailed step by step, with the right links?
thank you
NYITGUY said:
i was able to downgrade my unlocked and hardspl'ed 750 from 1.54.30.10 to 1.54.07.00. i had to use the palm recovery tool that was extracted from Treo750_2_27_ROW_EN_DesktopUpdater.
there's a thread on it, but basically, ran the recovery tool, then flashed the 2.27 ROW EN update, then updated it with a radio-less 6.1 ROM. after the ROW update, the radio version was 1.54.07.00, which worked much better with ATT
Click to expand...
Click to collapse
That's crap! 2.27 ROW Radio version is 1.54.01.00
NYITGUY said:
i was able to downgrade my unlocked and hardspl'ed 750 from 1.54.30.10 to 1.54.07.00...
Click to expand...
Click to collapse
Not wanting or trying to get into a fray, but rather really trying to understand how you have succeeded where we have failed. I have tried your method to no avail. As I stated here and elsewhere I've tried throwing everything at this firmware/radio short of the kitchen sink. The reason this radio cannot be downgraded, as I understand it, is due to a "password" type issue. The available down-level firmware and the methods for accessing the firmware do not allow for the 1.54.30.10 firmware to be overwritten. I truly question the validity of the claim, not that I think you a liar, but rather that you actually had 1.54.30.10 firmware installed or that you have successfully overwritten. How are you determining that you had 1.54.30.10 installed? How are you determining that you have overwritten with a down-level firmware?
I doubt you will do this, and you certainly owe us nothing, but as a service to your XDA compatriots, how about you re-install 1.54.30.10 show us that you have it installed, then overwrite it. Screen shots would be lovely.
Again, this may come off as having attitude, but that is not intended. This is purely an academic challenge to help the rest of us understand how you have succeeded where the rest of us continue to fail.
Thanks in advance, cheers!
tmknight said:
Not wanting or trying to get into a fray, but rather really trying to understand how you have succeeded where we have failed. I have tried your method to no avail. As I stated here and elsewhere I've tried throwing everything at this firmware/radio short of the kitchen sink. The reason this radio cannot be downgraded, as I understand it, is due to a "password" type issue. The available down-level firmware and the methods for accessing the firmware do not allow for the 1.54.30.10 firmware to be overwritten. I truly question the validity of the claim, not that I think you a liar, but rather that you actually had 1.54.30.10 firmware installed or that you have successfully overwritten. How are you determining that you had 1.54.30.10 installed? How are you determining that you have overwritten with a down-level firmware?
I doubt you will do this, and you certainly owe us nothing, but as a service to your XDA compatriots, how about you re-install 1.54.30.10 show us that you have it installed, then overwrite it. Screen shots would be lovely.
Again, this may come off as having attitude, but that is not intended. This is purely an academic challenge to help the rest of us understand how you have succeeded where the rest of us continue to fail.
Thanks in advance, cheers!
Click to expand...
Click to collapse
....
i had flashed the different radio version via sd card. i actually bought a new treo when i realized i couldnt get it to revert down to an older version, and 1.54.30.10 was horrible with ATT in NYC. i would get on an elevator and lose service and have to cycle the radio to get service again
i wanted to sell the one of the treo 750s, but didnt want to stick the buyer with the crappy radio version. i tried the method someone else posted up and it worked, i was actually very surprised.
its sold and gone, working happily on att with the rom version i posted above.
the only thing i had done before the ill fated flash was to hard spl the device and sim unlock it.
i have no reason to make it up, i can assure you i was stuck on 1.54.30.10, as i went out and bought a new treo 750 to replace it when i couldnt get the radio flashed down. it was stuck as i had tried to reflash the radio SEVERAL times, both using the hermes flasher and the sd card method. it sat on my desk for a few months gathering dust.
i dont have a stake in this, as i actually dont even use the treo i have left anymore-- the second one that i never flashed to 1.54.30.10. i'm now using a kaiser.
all i can say is, i didnt think to take screenshots because why the heck would i make this up? the radio was stuck at 1.54.30.10. i simply followed another members instructions for the hell of it (i was about to rip it apart for spare parts) and lo and behold, the radio dropped to 1.54.07.00. sold it. done.
i wouldn't have bothered to waste the time to post my success if i had known i would have people calling me a liar. seriously? for what? bragging rights that i fixed my own screwup?
was your device hard-spl'ed before you flashed the 1.54.30.10 rom?
Also a no-go here with the URT. Tried MTTY. Even tried BRICKING the darned thing with MTTY, corrupting the OS and radio, and no luck, reflashes but the damned evil radio remains intact. Gone as far as flashing a kaiser radio then reflashing a cheetah radio...no luck. Anyone? Imma shoot this thing lol.
h
PsyberEMT said:
Also a no-go here with the URT. Tried MTTY. Even tried BRICKING the darned thing with MTTY, corrupting the OS and radio, and no luck, reflashes but the damned evil radio remains intact. Gone as far as flashing a kaiser radio then reflashing a cheetah radio...no luck. Anyone? Imma shoot this thing lol.
Click to expand...
Click to collapse
same situation.
maybe we should upgrade to a newer radio rom? something that works better with at&t?
anyone?
Not even sure if there is a newer hermes radio out?
NYITGUY said:
....
i wouldn't have bothered to waste the time to post my success if i had known i would have people calling me a liar. seriously? for what? bragging rights that i fixed my own screwup?
Click to expand...
Click to collapse
It's amazing that you still cop to this when I SPECIFICALLY stated that was not what I was getting at...why do people WANT to feel as though they're being kicked?
Anyway...
From the relevant bits of your response, I have to believe your "success" in downgrade to lower version firmware was rooted in the fact that the firmware upgrade to 1.54.30.10 actually did not succeed. Sorry mate, this one's a dead end.
Still waiting for someone familiar with the firmware coding to step-up and help us out of this jam...Bueller?
ericizzy1 said:
same situation.
maybe we should upgrade to a newer radio rom? something that works better with at&t?
Click to expand...
Click to collapse
That's my hope too, maybe the new WM6.1 ROM that we're promised will have a newer radio that can overwrite this one.
A little input
My understanding of this problem is that the persistently present problem radio version in question has a bootloader that requires a main bootloader (SPL) which can do a sort of authentication handshake.
Essentially the radio bootloader says "hey, SPL, here's some numbers...what's your reply? And if I like your answer I'll allow new radio code to be flashed. If I don't like your answer or I don't get one, take a hike jackass". The Treo SPL can't respond to the radio as needed.
To my knowledge an SPL with this capability has never been released for the cheetah. Ages ago when this was a topic of interest, I was told that someone may be able to port a hermes bootloader over to the cheetah that runs and can at least allow for reverting the radio. The hermes and cheetah are very very similar, with most of the differences being in address locations and so forth and whatnot and what have you.
There's only a handful of folks 'round here who could port a hermes SPL, but unfortunately they don't have Treos and are thus likely not all that motivated. Donations may perk their ears, but the developer not having a device for live testing can be painful for all involved. I used my device as the test subject for Oli while he dev'd the unlocker and it took a lot of IMing code back and forth and describing test results to him. I'm surprised he had the patience really. I've been stuck with that locked hermes radio ever since and it's been bearable, but HSDPA throughput is not good.
The Palm support tool would not be able to overcome this particular issue.
Is there a large number of folks with stuck radios?
I'm stuck with it!
summiter said:
My understanding of this problem is that the persistently present problem radio version in question has a bootloader that requires a main bootloader (SPL) which can do a sort of authentication handshake.
Essentially the radio bootloader says "hey, SPL, here's some numbers...what's your reply? And if I like your answer I'll allow new radio code to be flashed. If I don't like your answer or I don't get one, take a hike jackass". The Treo SPL can't respond to the radio as needed.
To my knowledge an SPL with this capability has never been released for the cheetah. Ages ago when this was a topic of interest, I was told that someone may be able to port a hermes bootloader over to the cheetah that runs and can at least allow for reverting the radio. The hermes and cheetah are very very similar, with most of the differences being in address locations and so forth and whatnot and what have you.
There's only a handful of folks 'round here who could port a hermes SPL, but unfortunately they don't have Treos and are thus likely not all that motivated. Donations may perk their ears, but the developer not having a device for live testing can be painful for all involved. I used my device as the test subject for Oli while he dev'd the unlocker and it took a lot of IMing code back and forth and describing test results to him. I'm surprised he had the patience really. I've been stuck with that locked hermes radio ever since and it's been bearable, but HSDPA throughput is not good.
The Palm support tool would not be able to overcome this particular issue.
Is there a large number of folks with stuck radios?
Click to expand...
Click to collapse
Hi Summiter
Yes, I think there are a relatively large number of people stuck with it, judging by the threads I've been following in the hope that someone finds a solution. Whether it's enough people to motivate Oli or one of the other gurus is not certain though.
My device has better BT connectivity and louder speaker volume, but dumps most of my calls whenever the signal goes below 2 bars. Very upsetting for me and frustrating those at the other end.
It'd be great to get out of this jam - serves me right for playing with 'cooked' ROMs and such - but I love what these people do on XDA-Dev, and can't help but wanting to join the party.
Anyway, for this problem I'm almost resigned to junking the 750, and getting another device - maybe an HP 914c or a Treo 850 when they come out. I love my 750, but it's getting to be a real issue for me.
From posts here and other sites there appears to be a large number of 1.54.30.10 radios on Treo's. Though there appears to be a divide in those that feel it works fine vs those who know it does have issues. With that however, I feel the new devices on the horizon will soon make this discussion moot.
-
I've had a really bad time with 1.54.30.10. Lots of dropped calls, crashed radio etc.
So many times I had to turn radio off then on to make a call.
GPRS would sometimes show connected but not transfer any data and it would need to be disconnected then reconnected.
Also, battery life was worse than before (I didn't think that was possible, Treo is so bad already).
I don't have time to try all the options listed above for returning to an older Radio so instead I'm trying the new Hermes Radio ROM: 1.56.70.11
I'll give it a couple of days then report back. Other Hermes users are reporting pretty bad battery life with it - but if the radio is more stable I'll stick with it.
If you want to try it yourself, the file name is
HERM_Radinly_1.56.70.11_CustomRUU
It was rock solid (for Windows Mobile, that is) on the 1.54.07 and older Radios.
I'm on Vodafone New Zealand by the way which is a 900/1800Mhz GSM, 2100Mhz 3G HSDPA network. We should be listing network frequencies here -- some Radio ROMs might be better or worse on particular frequencies.
Ok, so here's the deal:
I have this nice HTC Himalaya (accu description label says PH10B).
I use it a lot, and I've used it in the past for calling and sms as well, no problems there. However, since I upgraded it to wm6 (or 6.1, doesn't matter), I get no network. Booting up it says nothing about no gsm, it tells me nicely what radio and protocol version I have, it just doesn't get any network. It does read the SIM, since I can read contacts and/or change/toggle the SIM password.
When I enable the Band tab on the Phone settings dialog (I use Schaps Advanced Config for this) it just says that it's 'Unable to change GSM/UMTS Band', and that I should try again later. This partially makes sense, 'cause I have no UMTS. However: when I 'visit' the Band-tab again, the GSM Band shows up empty (none of the available options is selected by default), so something sure seems to go wrong here. I'm currently using a different phone next to this device as my PDA, but I'd love it to work again...
Any thoughts?
Edit: Just so you know, I've used all radio ROMs I could find, just to eliminate that. I currently use a radio rom bundled with my own carriers latest official upgrade (I own a Dutch phone, my carrier ATM is KPN/Hi), but I'll be glad to try anything else if that'll make it work.
maybe stating what radio rom you have would help
Rudegar said:
maybe stating what radio rom you have would help
Click to expand...
Click to collapse
Ofcourse, at the moment 1.16, but I'm flashing to 1.08 again, 'cause I read somewhere that one worked best with WM6. I'm flashing without my SIM in it, as that is the way to go as well. I don't expect it to work though, 'cause like I edited in my first post, it wouldn't work before, not from 1.08 through to 1.19...
Update: that radio ROM didn't bring any change indeed, so I guess no more network for my Himalaya... Luckily enough my Touch Dual is shipping this Saturday, so I'll be out of trouble by then. Sadly enough that does mean leaving my Hima behind, but not fulltime it's been with me from WM2003 through to 6.1, and maybe, just really maybe 7 will run on it too, and I wouldn't want to miss that
I did a search under "audio" and "search", and couldn't find anything or suck at searching.
I'm using the AT&T Tilt which I did the WM 6.1 upgrade minus bloatware and am running KaiserTweak. Other than that, everything is factory.
I can talk on my phone just fine and it rings without issue, but all other sounds are muted. The alarm only vibrates even though sound is also selected, no sound for music, no ques on my bluetooth (ie, "Say a command"). I'm sure it's something easy and I'll feel stupid, but can anyone help me out?
In addition, my display will dim and the only way to brighten it again is to blank the screen and then turn it back on (I haven't searched this yet).
Thank you very much, Peter.
PeterB1234 said:
I did a search under "audio" and "search", and couldn't find anything or suck at searching.
I'm using the AT&T Tilt which I did the WM 6.1 upgrade minus bloatware and am running KaiserTweak. Other than that, everything is factory.
I can talk on my phone just fine and it rings without issue, but all other sounds are muted. The alarm only vibrates even though sound is also selected, no sound for music, no ques on my bluetooth (ie, "Say a command"). I'm sure it's something easy and I'll feel stupid, but can anyone help me out?
In addition, my display will dim and the only way to brighten it again is to blank the screen and then turn it back on (I haven't searched this yet).
Thank you very much, Peter.
Click to expand...
Click to collapse
What Radio version are you using?
Try upgrading to a WM6.1 Radio (or a different version).
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
Ta
Dave
Now for my next trick an even stupider (is that a word) question --- How do I tell what redio I'm using?
I'm reading threads about Radios and the different versions available, but I still haven't found how to determine which one I'm using.
Thanks
**** Edit, never mind, I found it. I'm using 1.65.21.18 on ROM versin 3.57.502.2 WWE
PeterB1234 said:
Now for my next trick an even stupider (is that a word) question --- How do I tell what redio I'm using?
I'm reading threads about Radios and the different versions available, but I still haven't found how to determine which one I'm using.
Thanks
**** Edit, never mind, I found it. I'm using 1.65.21.18 on ROM versin 3.57.502.2 WWE
Click to expand...
Click to collapse
That should be OK.
Have you done Hard SPL, if so try some of the other Radios, they might work
Ta
DAve
I'm not sure what HardSPL is ... Noob.
I'm also searching to see how you install a new radio. There are just so many posts here that you have to search through pages of search result after search result to find this stuff.
I'm looking at going to the 1.65.24.36 radio, but I've read that you have to have HardSPL, which I still don't know what that is, and it says its the NIKI network, and I don't know if that means I can't run it on the AT&T network.
Confusing and overloading at the same time.
PeterB1234 said:
I'm not sure what HardSPL is ... Noob.
I'm also searching to see how you install a new radio. There are just so many posts here that you have to search through pages of search result after search result to find this stuff.
I'm looking at going to the 1.65.24.36 radio, but I've read that you have to have HardSPL, which I still don't know what that is, and it says its the NIKI network, and I don't know if that means I can't run it on the AT&T network.
Confusing and overloading at the same time.
Click to expand...
Click to collapse
Hehe
Hard SPL allows you to flash you phones ROM with Images other than the ones provided by your carrier.
Installation instructions in Post #2 here: http://forum.xda-developers.com/showthread.php?t=396922 You will probably be best with 3.56 version.
Flashing a Radio help is here:http://forum.xda-developers.com/showthread.php?t=393182
If the Radio is listed in this thread and is for the same WM version it should work. All the other info is where it was ripped from, it only goes in the thread if it works.
However, all that aside, if you have just upgraded the ATT stock ROM, none of that should be needed. Can you re-check all of the Sound and Volume options in Start>Settings and the Drop down from the volume option on the today screen.
Thanks
Dave
DaveShaw said:
Hehe
However, all that aside, if you have just upgraded the ATT stock ROM, none of that should be needed. Can you re-check all of the Sound and Volume options in Start>Settings and the Drop down from the volume option on the today screen.
Click to expand...
Click to collapse
Yes, it's just the stock WM 6.1 ROM. I'm not interested in being a power user, I just want the very basic improvements. This may change down the road, but everything with the exception of sound works great.
In the Sounds & Notifications settings. Events, Programs and Notifications are checked but not Screen Taps or Hardware Buttons. When I click on the "Speaker" icon, both the device and phone settings are at max and on.
I dunno then, maybe another ATT user will come along and have some more help, sorry
Dave
Thanks Dave, I appreciate your help. I'll probably just hard reset it and see what happens. Thanks again.
Maybe the bloatware install was interrupted to early?
PeterB1234 said:
I'll probably just hard reset it and see what happens. Thanks again.
Click to expand...
Click to collapse
Absolutely a good idea, especially if you've just upgraded ROMs (always a good idea to do a hard reset after a ROM upgrade anyway as a matter of course). If you interrupted the configuration/bloatware install at the wrong place, that may explain why some of your sounds aren't working also. Try the full uninterrupted install, test the sound in all the areas where it currently doesn't work properly, then work backwards doing another hard reset and interrupting it at the 'right point' until your sounds are there but not the things you don't want.
The OP was 100% correct. He sucks at searching.
Hey m8 i have a same problem as U! I tryed everything but nothing. I dont know how to solve this one. I also tryed every fck version of radio and even original htc OS. I also tryed with hard reset but didn't help. I also have topic in General area - Sound problem - DEATH! so...u are not alone
kimtyson said:
The OP was 100% correct. He sucks at searching.
Click to expand...
Click to collapse
Yeah, but at least I'm not posting stupid comments just to try to boost my post count.
------------
Hard reset worked, so I'll just hope it's not reoccurring.
I have just purchased off ebay this extreemly good phone, I was sick of my nokia e71 and fancied a change, I missed the touch screen of phones ive had in the past.
Question for everyone the firmware seems a little buggy and ive checked on htc;s website but any upgrades wont work with my serial number (the phone is original htc but with 3 software on it)
Does anyone else have this problem with their 3 mobile and has anyone on 3 upgraded the firmware to one of the 6.5 versions available and if so does all the settings still work after the upgrade.
Ive upgraded my last wm phone so im ok at doing it but what I dont want is to lose all settings and not be able to access the internet etc ..
cheers in advance - good to be back on xda site ... never again will I buy a nokia !!!
chris
All custom ROMs come with connection setup to which will setup 3 as carrier
original roms
stylez said:
All custom ROMs come with connection setup to which will setup 3 as carrier
Click to expand...
Click to collapse
superb question then where can I find the original firmware should I decide against the custom rom ?? I had a lot of trial and errors on my last xda phone and ended up back on the original firmware
i cant wait to get rid of the 3 firmware cos it sucks however wanna be safe just in case and have the backed up firware around
cheers and thanks for the swift response
chris
You may be able to find an original 3 rom someplace ( there isn't one in the wiki ) or you can dump your own rom
http://forum.xda-developers.com/showthread.php?t=334680
But once you hardspl your phone to flash a custom rom, you will be able to flash anyone's stock rom, Vodaphone,Orange, T-Mobile...........
Upgrade firmware
ive been searching for the original 3 firmware which ive now found however when I look at the different radio's on htc's 6.5 firmware generic its different whats the radio do =- what i dont wanna do is upgrade and find nowt works
has anyone out there upgraded their tytn ii on three with a rom and had no issues - if so which one ... cheers chris
mancuk29 said:
ive been searching for the original 3 firmware which ive now found however when I look at the different radio's on htc's 6.5 firmware generic its different whats the radio do =- what i dont wanna do is upgrade and find nowt works
has anyone out there upgraded their tytn ii on three with a rom and had no issues - if so which one ... cheers chris
Click to expand...
Click to collapse
The Radio effects signal/gps fix/battery life and the outcome of which is best is very much varied by location.
The STICKY in ROM Development holds alot of valuable info from how to flash to Radios etc.
I have the Kaiser on 3. I have changed the ROM several times and the radio once. I have found that the signal is better on the radio I am using and the ROM's are brilliant. WM6.5 is great, just waiting for a stable wm6.5 with the new m2d v2 installed.
Wack one on and have some fun, just hardspl it first.
Blinkydamo said:
I have the Kaiser on 3. I have changed the ROM several times and the radio once. I have found that the signal is better on the radio I am using and the ROM's are brilliant. WM6.5 is great, just waiting for a stable wm6.5 with the new m2d v2 installed.
Wack one on and have some fun, just hardspl it first.
Click to expand...
Click to collapse
Yes will hard spl it ..... which radio did you put on ?
I did on my original tytn without the keyboard (cant remember the name of it) some of the roms I didnt like but always was rest assured that I could change the rom without risk cos of hard spl ...
which rom would you suggest ? do they have the connections setup on it so that I can set up sm/mms/internet access im not that bothered about planet 3 but need internet ...
im gonna risk rom upgrade cos the one ive got is horrendous , ive reset it several times ......
just wanna know which one you suggest ,....
Kaiser / Tytn II on Three
Hi
I picked up an Orange TytnII off ebay and after putting hard SPL on I have been using many roms fine on three UK
My favourite is this one:
http://forum.xda-developers.com/showthread.php?t=519715
although be sure to check out many of the other excellent roms on here, there is some real talented chef's, I also like the PDA corner roms
Regarding stock I used an orange UK stock rom that also changed the radio, read the instructions well on here as you'll want to make sure you hard reset, stock rom, stock radio, hard reset then 6.5 then radio then another hard reset just to make sure you clear everything.
Regarding radio you can try many different ones, again read the posts you'll find some just don't allow you to make / receive calls if they're not in line with the rom.
I think I have my current setup in my signature.
Also be sure to check out the posts with the iskoot client configured for three's free skype access, getting free MSN is a bit trickier and to be honest the java client is a bit flaky for my liking so I just use it out of my allowance !
pm me if you get stuck
Damian
I have been using this rom, http://forum.xda-developers.com/showthread.php?t=507281, found it to be very good.
The radio I have been using is 1710901 but you will have to try a few and see which one is the best for you.
Blinky
just to clarify
so the radio doesnt matter to the mobile phone supplier ..... as long as the radio and new firmware works together it will work on 3 .... ?
ive found a possible firmware but the radio has to be different so its gonna be both upgraded ... im just concerned as 3 software is so tied down that i dont wanna have a non working phone
ive upgraded before on a previous htc phone but didnt have to do radio upgrades .....
ta
mancuk29 said:
so the radio doesnt matter to the mobile phone supplier ..... as long as the radio and new firmware works together it will work on 3 .... ?
ive found a possible firmware but the radio has to be different so its gonna be both upgraded ... im just concerned as 3 software is so tied down that i dont wanna have a non working phone
ive upgraded before on a previous htc phone but didnt have to do radio upgrades .....
ta
Click to expand...
Click to collapse
I too have an unlocked Orange Tytn II I got on orange contract and unlocked on day 1. Gave Orange sim to the missus and jumped over to three.
I have used a numbe of roms and radios, but currently use Shifu 19 WWE with radio 1.70.19.09. Works perfectly.
I reckon 3 is the perfect network in the UK for Tytn II as PAYG internet allowances are very good.
Its not as tied down as you think. I have the ISkoot WM client running using 3 connections for free calls etc and also SkypeManager running on home PC to get 100% free calls to all uk landlines too. Google SkypeManager.
Have fun!
success
well took the plunge this afternoon and hard spl'd, upgraded rom and radio how easy was that ... finally got a phone that doesnt crash and everything works superb ... settled for stylez black wwe with radio 1.70.19.09
superb thanks for all your help - very happy kaiser owner !!! ....
now I know how easy the process is im sure my firmware will change regularly all you rom makers superb keep up the good work
Dont forget to do the N95 spoof to get free MSN live usage on 3 network.
Ive been on 3 for a while now and think its great, signal isnt allways good where i live though, but what can you expect living at the bottom of the uk.