How to change 2.16 to 1.xx - please - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hello everyone,
I'm kinda lost between all this posts and numbers. I don't know my phone is G3 or G4, so I'll post everything and waiting your help to tell me. when I download rom & upgrade my pda, it does upgrade but with no effect like I did nothing
here is the info about my device:
Bootloader screen: IPL 1.01 / SPL 2.16
Using "hard_SPL-G4.exe" program report that my device is : G3
Booting slpash saying :
IPL 1.01
SPL 2.16
OS: 1.5.4.2
Menu>Settings>Device information:
ROM ver: 1.5.4.2
ROM Date: 11/08/05
Protocol ver: 4.0.13.23
pretty please help me how to upgrade it.

First things first: Your phone has a G3 DOC chip.
Get Wizard Service Tool and see if the CID is still locked (i think it is). The problem you have now is that you failed the upgrade and the SPL increased but the IPL remained 1.xx and unless you manage to get them to 1.xx you won't be able to unlock the CID.

Many thnx, mestrini
I tried to unlock CID using WST but got this:
SPL version is 2.16.0000
DOC chip is write-protected!!
Downgrade SPL to no higher than 1.06 and
repeat procedure.
Now to upgrade my device, I need to downgrade, unlock CID then upgrade it.
I'll do some search now
Many thnx again

Flash Button's 1.05 ROM couple of times until SPL changes to 1.01, then you can do unlocking.

I just downloaded : button's 1.05 ROM and upgrade/downgrade my device with no luck to change SPL. still reporting 2.16 SPL.
4 tries till now. all success upgrade/downgrade with no luck to change SPL.
any suggestion highly appreciated.
Thank you

Bailamos said:
I just downloaded : button's 1.05 ROM and upgrade/downgrade my device with no luck to change SPL. still reporting 2.16 SPL.
4 tries till now. all success upgrade/downgrade with no luck to change SPL.
any suggestion highly appreciated.
Thank you
Click to expand...
Click to collapse
I'm also clueless on how to solve this issue and believe me that it's what bothers me most nowadays because few have recovered from it and a lot are facing it still.

mestrini said:
I'm also clueless on how to solve this issue and believe me that it's what bothers me most nowadays because few have recovered from it and a lot are facing it still.
Click to expand...
Click to collapse
Thanx alot man
I may stick with un-upgradable device than useless device from trying & trying

Bailamos said:
Thanx alot man
I may stick with un-upgradable device than useless device from trying & trying
Click to expand...
Click to collapse
Sounds wise but whatever you do always be sure to have battery with good charge (>60%)

Plz keeo on trying by flashing Button's Rom 1.05 a couple of more times,u'll get down to ipl/spl 1.05
if it still doesn't,than try this rom Xda_MiniS_LaunchROM_v154102,hope it'll solve the problem.
third option is that while in bootloader mode,download and flash the Official Rom of ur carrier which was pre-installed before or any upgraded Official rom from the carriers official site.
Hope this'll work out,goodluck

7 months later .....
I'm back and asking you please, is there any solution yet for my problem? or it is time to think about having another device?
Thank you

Bailamos said:
7 months later .....
I'm back and asking you please, is there any solution yet for my problem? or it is time to think about having another device?
Thank you
Click to expand...
Click to collapse
Hi, i'm glad you came back as the latest version of WST allows to CID unlock even if IPL and SPL values are different.
A member reported success in recovering from a similar situation so i think you should try it. HERE
good luck and report back
cheers

Thank you, mestrini
I'll try it and report back
many thnx again

I just finished trying, here is my storyline
1) Faith on successful upgrade was 1%
2) I downloaded WST 4.2.2
3) Did CID unlock, then I got error that I should downgrade IPL to 1.xx ish >>
4) faith downgraded too to 0%
5) I did downgrade using button rom ( back to IPL:1.xxx SPL 2.16 )
6) Did CID unlock again, got msg that "Want to try unlock?" then faith down to -1%
7) after clicking "Yes", got msg saying "All done" ( Faith back to 0% )
8) did soft-reset, and was watching booting screen on my device, I saw IPL still 1.01 / SPL 2.16 >>> I was like d'oh ( Faith lvl -1% )
9) was pushing myself to do upgrade using random rom which was not workin on my device.
10) Upgrading in progress >> Upgrading finished >> Device rebooting.
11) was watching boot screen again, then I saw IPL 1.01 / SPL 2.15 ( meh >> Faith lvl -2% )
12) Faith Jump to 100% when I saw the new start up screen and the rom is damn working now
13) I'm so gratfull and happy ~ thank mestrini ~ thank you everyone
all in all, WST did it I got my rom upgraded now
thank you again
Yours,
Bailamos

Nice post, i enjoyed reading your story by steps and even more the faith progression (maybe a graph was in order there )
I'm glad your 'sort of' sorted it and you can now use other ROMs but it shouldn't be finished until both bootloaders have same value. But that's me, i don't settle for half job
Anyway, enjoy your new ROM
Cheers

CONGRATS !!!
Bailamos
Finally ! got it on the road after 7 months...
mestrini
Thats "THE TOOL" ,always had faith in you m8,thanks for such a wonderful tool

zabardast_1 said:
mestrini
Thats "THE TOOL" ,always had faith in you m8,thanks for such a wonderful tool
Click to expand...
Click to collapse
Thanks m8 it's all for the community

Related

Downgradeing HTC Wizard

Hi,
I've installed the latest AKU 3.2 Version on my Wizard.
Now i've wanted to downgrade to AKU 2.0 (with the original Loader Provided from "Vario_AKU2.0_05-2006.exe") and the tool tells me it is not possible. Is there a way to make it run?
Thanks a lot
It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..
Nobody warns ??????????????????????????
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.
mforce said:
It looks like nobody has an idea how to downgrade from SPL2.xx en that sucks! noboby warns about it when supplying new ROMS..
I have the same problem with a TMobile Vario that needs to be flashed to stock ROM\IPL\SPL..
I've found a way to do it but its for the HTC Thyfoon and might not work with the Wizard..
Click to expand...
Click to collapse
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...
Dr Puttingham said:
Gramma told me that if I don't have something nice to say to keep quiet...
Maybe if you downgrade to a 1.xx ROM first you can then go back to your AKU 2.
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Good luck.
Click to expand...
Click to collapse
Already tried that, not working.. btw wise gramma
vseehua said:
There are tons of threads on this issue already... maybe if you are hardworking enough to search for it yourself, you won't even have that problem at all... warnings are placed everywhere... please read before you even proceed to upgrade your rom...
Click to expand...
Click to collapse
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..
Possible solution
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).
mforce said:
Already tried that, not working.. btw wise gramma
I've searched for hours the two solutions Boots 1.05 end Cingular 1.8 do not work but if you are so sure their is an solution ill keep searching
Ofcource I know about warnings but ive NEVER seen an warning about SPL not being able to downgrade..
Click to expand...
Click to collapse
If you have a G3 device you can downgrade your IPL/SPL. I've done it my Cingular 8125 and it's 3 replacement PDA's numerous times. In addition I've downgraded at least 20 phones to 1.05 so's I could unlock and then upgrade. And then done it again. If you follow faria's instructions that is.... Now I HAVE had to flash the 1.05 twice to get the SPL down to 1.05. Humor us huh?
Note: I realize that Faria says that it doesn't work above 2.21 but I have performed this procedure on at least a dozen "out of the box" Cingular 2.25's. Downgrade to 1.05. Extract lokiwiz to the root of your C drive. Copy enablerapi.cab to your device (I know that you've unlocked your device, just indulge me please ) Execute enablerapi.cab from your PDA. get to a Dos prompt and run lokiwiz from the C prompt. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!
Dr Puttingham said:
If you have a G3 device you can downgrade your IPL/SPL. Unlock CID and SIM. It WILL reboot each time. If your IPL / SPL still show a 2.x reflash again with the 1.05.
If you do this I'll just about guarantee that it'll work
Good Luck!
Click to expand...
Click to collapse
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..
Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan
A2Z said:
Your garantee worked great fabulous work ! I downgraded my Dutch MDA Vario from official Tmobile Rom RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe with 2.21 IPL.SPL to 1.05. Indeed needed to run WWE flashrom - did the Lockwiz2b CID unlock and ran the Flashrom WWE again and voila IPL/SPL 1.01 - OS 1.5.4.2 -GSM 1.12.10.0 - Thanks a lot!!
I owe you one ..
Click to expand...
Click to collapse
Great! it works
stefan1975 said:
Hi,
i want to downgrade my 2.21 G3 Vario as well which is NLD and locked. I believe that I know all the steps neccesary and already downed the QTEK custom ROM. Can I just execute this ROM and have it install the older version on my Vario, run lokiwiz02b and upgrade again?
One part I didn't find on the forum was the need to run "WWE flashrom" again to downgrade to 1.05
What is this WWE flashrom, is it a seperate tool besides the Custom rom and if yes where do I get it?
thanks,
stefan
Click to expand...
Click to collapse
This one.. (flash it 2 times!)
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Seppl82 said:
A German mate told me that there is a solution
Try to load the Qtec Custom Rom from ...
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
.. and Flash it to your Wizard. After that is should be possible to load older Roms without any problems.
I did not have tested it... (Please tell me if its works or not).
Click to expand...
Click to collapse
Does NOT work, thnx anyway
I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)
Downgrading/Upgrading
Dr P. or anyone else,
I've seen "somewhere on this board" a description of how to flash "any rom" without having to downgrade to 1.05, it stated to change the .exe file to a .rar and then change the ruu file to one that is not looking for the current phone status. I've tried that and have not had success in doing so. IF there is infact a way to do this, could someone please provide a blow by blow scenario to accomplish it?
Thanks,
vpu2
HighVoltage said:
I have the same problem.
But i allready downgaded with the Custom version.
When i restart i can see. it is IPL 1.01 and SPL 2.26
Is it possilble olso downgrade the SPL (i do not exactrly know what it is)
Click to expand...
Click to collapse
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....
Dr Puttingham said:
Bet you didn't run the 1.05 a second time as I stated before. I'm actually doing a brand new Cingular G3 2.25 as we speak. I downgraded to 1.05, SPL still says 2.25. Copied enablerapi to the device and executed it from the device. Extracted lokiwiz to the root of my E drive (on my new thinkpad that I'm setting up at the same time...) It rebooted twice as it's susposed to when you unlock the CID and the SIM. Ran the downgrade a second time and both IPL and SPL are 1.01, the GSM is 1.12.10.0 and the OS is 1.5.4.2.... every freak'n time I do this, probably close to two dozen Cingular 8125's. If it don't work for you I just don't know what more to tell ya....
Click to expand...
Click to collapse
Hi Guys,
I tried everything but it doesn't help das anyone had another option?
Thanks
could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.
Dr Puttingham said:
could you be any vaguer? "tried everything" is so informative. report exactly the steps you've tried please.
Click to expand...
Click to collapse
I tried everything what everybody said in this post.
Mr hokkie, please humble me and document exactly what device you own and your exact IPL/SPL/OS/GSM versions. Beacuase I just don't think that you've got in in ya to be my first failure. Show me what you got
I own a Dutch MDA Vario from T-mobile, which has a T-mobile SIM-lock. I want to remove the SIM-lock, so I tried http://forum.xda-developers.com/showthread.php?t=249474&page=1. Unfortunately it returned an error, it appears I have a 2.21 ROM, so I want to downgrade the rom, which brought me to this thread.
I've downloaded the CUSTOM_RUU_Wizard_1050412_WWE_101_11210_WWE.exe, and ran it. I get the first few screens (the caution-screen, the prepare-screen, the Update screen, the verify screen and the last screen). After that I get the screen where a percentage bar should start moving. My phone-screen is now divided in about four horizontal parts.
The first one is red-fading to black, and it reads RUU on the top-right, and the line below it reads IPL 2.21.0001. The last line in this part reads SPL 2.21.0001.
The second part is similar to the first, but it is green, without any text. The third part is similar to the green one, except it's blue.
The last part is smaller than the previous parts, it's plain white (about two lines high) and reads USB.
On my PC I get a screen telling me:
ERROR[300]: INVALID UPDATE TOOL
This Udate Uility cannot be used for your PDA Phone. Please get newer Update Utillity.
What am I doing wrong here? (BTW: I'm a computer-expert and a phone-noob)
By the way, the verify screen reads:
From:
Model ID: WIZARD
Image Version: 1.2.0.0
Language: ENGLISH
To:
Model ID: Prodigy
Image version:
Language: WWE

Help. Ive got a Brick !!

Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
you say with the wm6 oficcial there is not a official rom for wizard tellme what rom do you used
AndyG said:
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
Click to expand...
Click to collapse
I bet you went from 1.02 to 3.08 without stopping at 2.xx
Maybe that's the cause?
but he says than he flashed with the oficcial rom there is no oficcial are agree
Hi Guys,
Thanks for the quick replies.. I used
http://forum.xda-developers.com/showthread.php?t=310954
( about quarter way down it says official download site for WM6.0.0)
Mestrini - Yes i went straight from 1.02 to 3.08 coz i cannot find the V2.xx IPL/SPL files but i have found the updater solely for the IPL/SPL to 3.08 which is what i used.
is that any use ??
flash your phone with the tmobile 2.26, that should correct your issue. It will also give you the 2.26 version of spl/ipl
ok if you had a cid unlocked device search in the forum for the t-mo 2.26 ipl/spl after you can update for the rom as you tell
en joy it
Thanks for the advice guys, ive tried several different roms and i have a consistent problem where it will not let me change the rom as ( i think ) my SPL version is still 3.08 and every ROM bombs out with "this is an upgrade only"
help me downgrade my IPL/SPL back to 1.02 pleaseeeee
cheers.
Andy
jb007jb
Junior Member
Join Date: Jul 2007
Posts: 6
Default Do Not Upgrade To 3.08 !!!!!!!!!!!!
Hi,
i have T-Mobile MDA and Im stuck with spl 3.08
I did everything.......... and I mean EVERYTHING and nothing helps me bring back my MDA to the original T-mobile software or downgrading the SPL.
1. Downgrading my IPL to 1.01 (using button rom)
2. Unlocking CID with lokiwiz (successfully)
3. Running button rom again
The SPL still stays 3.08 after doing the above...
If there is another way to downgrade the SPL 3.08, please let me know. I really need the T-mobile original rom version.
Thanks so much.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Reply With Quote
Click to expand...
Click to collapse
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
Thanking everyone who has taken the time to contribute
Andy. ( looking hopefully around too ;o) )
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
Click to expand...
Click to collapse
Thats your problem, reflash the 1.02 rom again, both IPL and SPL have to be the same.
hey nottoosmart
i know... i need to find a way to drop the SPL back to 1.02 or thereabouts. i cant flash back to the T-Moblie 2.26 ROM coz it says my SPL is too high. i upgraded my IPL and SPL using a rom updater now whatever i try i cannot drop the SPL version.
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
...
Andy. ( looking hopefully around too ;o) )
Click to expand...
Click to collapse
Maybe, just maybe, the O2 ROM may help you. Please see http://forum.xda-developers.com/showpost.php?p=1379884&postcount=2 That post is from vippie - so you know that you can rely on it!
kernelguy

CID Unlock not working

Hi All,
I have not been able to unlock my Cingular 8125... to upgrade the thing to WM6.
Yip ran the lockwiz a few times... it did give me some write error though.
...
CopyFileToTFFS(unlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072746
Your phone is now unlocked...
My phone is a G3. I can use different sims. But I cannot CID unlock? I have used lokiwiz and awizard... what else can I do to CID unlock?
I am currently downloading your rom.I have not tried any roms as I am quite new to this. I have flashed my 8125 to - IPL1.01 SPL 3.08 gsm 01.12.10 os1.5.4.2.
I have also tried several time to downgrade to button... no joy, the spl wont go. I have upgraded to both ipl/spl3.08 and still cannot upgrade the rom.
Thanks,
SanMan
Did you read the sticky with the guide to an easy and safe unlocking by Dr. Puttingham? If you did then you should have read with more attention.
You've messed up your phone's bootloader. It's not supposed to have such different values. If you didn't unlock it before moving to SPL 3.08 you won't be doing it now as it must be 1.xx for lokiwiz and other tools to work.
Go READ threads of others in same situation as you and be sure to have a FULL battery before starting the flashing process.
great thanks for that... so since my spl and ipl are not the same I need to try to downgrade my spl to the same version of button?
Bud I have read and read and read... and now I have only posted. I see that people in my predicament look for a rom called 1.18 from cingular and apparantly that fixes the problem so I can downgrade and re-run my cid unlock. I will read through all of Dr Putting threads where I have also posted to try to resolve this. Thanks for you constructive assistance.
Kind regards,
SanMan
We were all at this point in our lives sometime.
Need rom for downgrade
hi SandfordE,
Could you please send me the link or the file that downgrade the rom to 1.xx. i have tried to looking for so much time but sill can't not. all link is dead.
please, thank you for your help
the blind leading the blind.
well the only one I have been able to get is this one, from Dr putting
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
I cannot find the 1.xx cingular rom which apparantly you need if you dont follow dr p, goodies properly.
Apparantly if you goto http://www.htcwizardweb.net/node/161 and register there is a pathetically slow download link for 1.8x... which should be able to change the ipl and spl to the same thing.
hope this helps you. Please dont run or upgrade anything on ure phone till both the ipl and spl are 1.x that where I made my mistake.
Being a techie I guess thats our problem always wanting to upgrade with out rtfm.
hth
San
Thank SanFordE
Downloading, then downgrade to ipl/spl 1.xx, then cidunlock then uprade to ipl/spl 2.xx then update to wm6.
Am i correct??
thanks again for your help
hi magic
yip thats exactly what I am doing, hopefully it will work, please could you post ure results. Pity bandwidth here in South Africa is so terrible else i would be able to download at home.
Thanks man,
Sanford
hi SanfordE,
why my ipl is 1.xx but the spl still 2.xx after flash sucessfully??
Thanks
Hi,
This worked for me, now i just need to flash the ipl/spl 2.xx then ready for wm6
Thanks
Maybe try to flash with button from dr p sticky... but remember before you can do anything else the like run lokiwiz, the ipl and spl need to be 1.xx
hope this helps.
s
SanfordE said:
Maybe try to flash with button from dr p sticky... but remember before you can do anything else the like run lokiwiz, the ipl and spl need to be 1.xx
hope this helps.
s
Click to expand...
Click to collapse
wow, i'm impressed . You passed from asking for tutoring to giving good tips in no time. well done m8 . All you need now is to manage the successful downgrade.
Are you sure your phone is still locked? Check CID status with mtty.
Thanks for that tip
Got already will try this procedure again tonight... hopefully it works.
hi SanFordE,
now i'm on wm6. thank a lot for your support
Hi MagicEr,
How many times did you have to flash with 1.8.11
I have tried twice already and my spl is still 3.08...
Maybe downgrade to Wizard_Love 2.26? The rey the other way?
Any input is kewl...
no worries S
WM6 is lovely...
All fixed on WM6
Note to all good people, once you have flashed with 1.8.11 <-- this is only on a cingular 8125, even though the spl is 3.08, you can run your lokiwiz to CID unlock and then flash.
Many thanks to all the developers and contributors to this forum.
Sanford
SanfordE said:
All fixed on WM6
Note to all good people, once you have flashed with 1.8.11 <-- this is only on a cingular 8125, even though the spl is 3.08, you can run your lokiwiz to CID unlock and then flash.
Many thanks to all the developers and contributors to this forum.
Sanford
Click to expand...
Click to collapse
hmm not sure if the SPL is really 3.08 although it shows that.
The CID block protection is applied by SPL so if lokiwiz worked it means that the SPL did downgrade
Glad you fixed it though.
cheers

Wizard_love

Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.
sdl said:
Can someone point me to an English version of this? The only one I can find linked on this site is http://rs25.rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar. This is in another language (Italian maybe) and I keep getting a "300" error. Thanks.
Click to expand...
Click to collapse
Are you sure you have a G4 ?
No, I have a G3. But according to "How to flash a new ROM to your Wizard... a little tutorial!" http://forum.xda-developers.com/showthread.php?t=298613, if I have an IPL/SPL of 2.xx, I need the wizard_love rom. Read last sentence of G.2.
I used the button ROM. It brought my IPL down to 1.01, but my SPL is still 2.25. Is that OK to proceed?
Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.
xeno1 said:
Keep reflashing the button ROM until both your IPL and SPL are 1.xx. It may take a few times. I think I've read where it's taken some people as many as 7 or 8 times to get them both down. Be patient and make sure your battery is good and charged and when you get them both down, then run lokiwiz to unlock your phone.
Click to expand...
Click to collapse
After at least 15 flashes with button, still no luck. I started with Cingular 2.25.
The button I am using is CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.
My IPL is down to 1.01, but my SPL is still 2.25. How in the world do I get passed this?
It really sucks when you can't get past the first step .
P.S. Should the SIM be in the unit during the flash? I've tried it both ways.
Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.
xeno1 said:
Not sure if it matters if the sim in is in it or not, but make sure your SD card is out because that causes problems a lot of times. Here, download and try this, it is an IPL/SPL updater only. It has version 1.05 of both which might be able to bring your SPL down so you can unlock your phone.
Click to expand...
Click to collapse
Tried it several times. No luck, SPL still stuck at 2.25, but thanks for the help. Anyone else out there with this problem?
That's weird, usually it happens the other way around and people get their IPL stuck at 1.xx when they try to upgrade back to a 2.xx but the SPL upgrades without a problem. Since you already have the button ROM on there, go ahead and try and see if it will CID unlock for you. Run lokiwiz and see if it gives you any errors and if not, download and install Wizard Service Tools on to your computer and then run it and click the CID actions button to see if it tells you that your CID is unlocked. If it does then your safe to start upgrading. For some reason I have a feeling it might just work for you.
same here, got the cingular 8125 and flashed the rom. I can not get the spl down. I have 2.25 as well. ahhh what other rom should be good for a cid unlock
also i am on activesync as "guest" dont know if this matters
ctheodores said:
also i am on activesync as "guest" dont know if this matters
Click to expand...
Click to collapse
That doesn't matter.
Try flashing Tmobile 2.26 then again the 1.05 Button ROM
From what i know the Wizard Love is only for G4 Users. G3 users should flash Tmobile stoc 2.26
not all g3 are the same!!
i have experienced the same with my g3 (IPL/SPL 2.18) when i tryed to downgrade the spl... ipl 1.05 and spl 2.18 still remain... just try to unlock spl with lokiwiz02b and relax... i tried to install tnt 5.0 23 times before i unlocked the spl... just read and apply this : http://forum.xda-developers.com/showthread.php?t=285435
i downgraded and reupgraded my spl locked g3 (qtek 9100) in 45 minutes at the state of art...
-----------------------------------------------
tnx to all people that try and try and try and teach us with his experience...
I have found that the SPL doesn't matter. Go ahead and run lokiwiz and you will be ok.
yeah i got throught just run lokiwiz02b cid unlock and then update to tmo rom

IPL and SPL that don't match

I started a new thread so that people wouldn't have to read through my trials but long story short I have a G3 wizard and I'm trying to flash it. Followed all of the steps in the guide by vippie. I used the button rom to start with but mine was one of the many that stopped at 98% and gave me error 302 so I ended up using the XDA mini rom as the alternative that was suggested.
Now I've flashed my phone three times with the same rom to try and get the IPL and SPL the same but to no avail. The IPL and SPL are 1.05 and 2.25 respectively. Any help would be greatly appreciated.
hey i flashed my tmobile mda to a chinese rom too and then it changed spl to a diff version than the ipl and then i tried to flashed it with love rom and still it doesnt change the ipl and spl to the same version that i had before, then i removed the battery then my phone does not charge or turn on anymore, i have a g4 by the way, i m not sure if i bricked it or not
joco2560 said:
hey i flashed my tmobile mda to a chinese rom too and then it changed spl to a diff version than the ipl and then i tried to flashed it with love rom and still it doesnt change the ipl and spl to the same version that i had before, then i removed the battery then my phone does not charge or turn on anymore, i have a g4 by the way, i m not sure if i bricked it or not
Click to expand...
Click to collapse
I think you may have been trying to offer your empathy for my particular situation but that's what we in the business call thread jacking. Start your own thread please. Thanks for the comments though.
I was thinking today I may give flashing the button rom another try. Any suggestions people?
And a bump for some professional help and good luck as well.
SharpieMarker said:
I think you may have been trying to offer your empathy for my particular situation but that's what we in the business call thread jacking. Start your own thread please. Thanks for the comments though.
I was thinking today I may give flashing the button rom another try. Any suggestions people?
And a bump for some professional help and good luck as well.
Click to expand...
Click to collapse
wow, basically the same problem just trying to let u no that other ppl r having the same problem and i thought my problem would've helped in some ways...thx for trying to be nice at the end but ur not. sry i forgot to metion that:" hey, SharpieMarker im having the same problem that ur having..."in my previous post
joco2560 said:
wow, basically the same problem just trying to let u no that other ppl r having the same problem and i thought my problem would've helped in some ways...thx for trying to be nice at the end but ur not. sry i forgot to metion that:" hey, SharpieMarker im having the same problem that ur having..."in my previous post
Click to expand...
Click to collapse
Well I apologize if I came of as a douche, I guess I didn't understand what you were saying exactly. I appreciate any support I can get with the issues I'm having so its good to know I'm not the only one. Thanks joco.
SharpieMarker said:
Now I've flashed my phone three times with the same rom to try and get the IPL and SPL the same but to no avail. The IPL and SPL are 1.05 and 2.25 respectively. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Surely you're not serious? oh Jesus, you are.
OK... SPL is separate from IPL, not only is it impossible to get them to be "the same version" it would also achieve nothing to actually do so either... so please, the procedure is very simple, you flash a patched SPL, you flash your crap on. Job Done... I thought there was already a patched SPL for G3... do I need to make one of those as well?!?
Olipro said:
Surely you're not serious? oh Jesus, you are.
OK... SPL is separate from IPL, not only is it impossible to get them to be "the same version" it would also achieve nothing to actually do so either... so please, the procedure is very simple, you flash a patched SPL, you flash your crap on. Job Done... I thought there was already a patched SPL for G3... do I need to make one of those as well?!?
Click to expand...
Click to collapse
Well that seems logical however I was misinformed. SO I've flashed this Xda_mini rom, then what is the cause of the issues I was having getting a connection error when trying to CID unlock? Wizards have to be CID unlocked before flashing 2.X roms right?
What started as a simple, objective thread, has become quite confusing in a matter of a few posts.
joco2560 said:
wow, basically the same problem just trying to let u no that other ppl r having the same problem and i thought my problem would've helped in some ways...thx for trying to be nice at the end but ur not. sry i forgot to metion that:" hey, SharpieMarker im having the same problem that ur having..."in my previous post
Click to expand...
Click to collapse
Well, in fact your problem ISN'T the same as SharpieMarker's because his phone is still alive...
I believe you tried to downgrade a G4 to 1.xx bootloader which only exist for G3. Once the battery came out your phone could never boot again. Say bye bye to it...
SharpieMarker said:
Well that seems logical however I was misinformed. SO I've flashed this Xda_mini rom, then what is the cause of the issues I was having getting a connection error when trying to CID unlock? Wizards have to be CID unlocked before flashing 2.X roms right?
Click to expand...
Click to collapse
A LOT of people are reporting failed downgrades which 'block' the SPL at 2.xx. Once there even after 30 flashes the SPL never lowers to 1.xx to allow CID unlocking.
No solution is known until now...
Olipro said:
Surely you're not serious? oh Jesus, you are.
OK... SPL is separate from IPL, not only is it impossible to get them to be "the same version" it would also achieve nothing to actually do so either... so please, the procedure is very simple, you flash a patched SPL, you flash your crap on. Job Done... I thought there was already a patched SPL for G3... do I need to make one of those as well?!?
Click to expand...
Click to collapse
There isn't and i believe you should patch one...
cheers
mestrini said:
A LOT of people are reporting failed downgrades which 'block' the SPL at 2.xx. Once there even after 30 flashes the SPL never lowers to 1.xx to allow CID unlocking.
No solution is known until now...
Click to expand...
Click to collapse
So what is the solution or is it the patched SPL that Olipro is referring to?
The HardSPL (Olipro) is ONLY for use with G4. The flash program should keep you from flashing it to a G3 Wizard because their SPL code are not compatible.
SoftSPL also doesn't work for G3 wizard.
joco2560 should be produced a brick because as I know, no unofficial Chinese ROMs are equipped with G4 IPL and SPL.
Man if only these guys would have read the WIKI... There is a link in my signature to an outstanding tutorial for newbies. Just read it and you will feel enlightened. Everything will seem so simple and life's purpose will become evident... Just Kidding but seriously guys... Read the damn WIKI... I'm tired of reading about bricks.
NOTE:: THIS ENTIRE POST IS ONE GIANT LINK TO THE WIKI I'M TALKING ABOUT!!!
READ IT!!!
starkwong said:
The HardSPL (Olipro) is ONLY for use with G4. The flash program should keep you from flashing it to a G3 Wizard because their SPL code are not compatible.
SoftSPL also doesn't work for G3 wizard.
joco2560 should be produced a brick because as I know, no unofficial Chinese ROMs are equipped with G4 IPL and SPL.
Click to expand...
Click to collapse
Alright, this is helpful and I was hoping there might be a few suggestions as to what to do at this point. Thanks guys for the comments.
dharvey4651 said:
Man if only these guys would have read the WIKI... There is a link in my signature to an outstanding tutorial for newbies. Just read it and you will feel enlightened. Everything will seem so simple and life's purpose will become evident... Just Kidding but seriously guys... Read the damn WIKI... I'm tired of reading about bricks.
NOTE:: THIS ENTIRE POST IS ONE GIANT LINK TO THE WIKI I'M TALKING ABOUT!!!
READ IT!!!
Click to expand...
Click to collapse
Okay, firstly I have not bricked my device. I have read all of the guides and walkthroughs before attempting anything on my wizard. Unfortunately your guide that you have written, just like the other ones, has not answered my question or told me what I should do (unless I have missed it somewhere which is possible).
Okay, after some finagling with the lokiwiz application I managed to unlock and then cid unlock my phone however the IPL is still 1.05 and the SPL is 2.25. Is that accurate or should the SPL be lower now? Do I need to reflash?
Alright, after re-re-re-re-re-reading the instructions I think I understand the bit about IPL and SPL. I think. Feel free to clarify though.
If lokiwiz does not show any errors during unlocking (NOTE That lokiwiz always shows successful regardless it is actually unlocked or not, so the error message is the most important), then either try to flash Button's ROM again and you will get 1.05 IPL and SPL (That's my way), and others suggests to upgrade IPL and SPL directly to 3.08.
starkwong said:
If lokiwiz does not show any errors during unlocking (NOTE That lokiwiz always shows successful regardless it is actually unlocked or not, so the error message is the most important), then either try to flash Button's ROM again and you will get 1.05 IPL and SPL (That's my way), and others suggests to upgrade IPL and SPL directly to 3.08.
Click to expand...
Click to collapse
There was no error message when I CID unlocked. It successfully unlocked both times (the first using the U command and after a restart using the C command). My phone restarted twice during the unlocking so I think it went just fine. So should I proceed with the flashing of the tmobile rom? After the unlocking I have an IPL of 1.05 and an SPL of 2.25.
You can always go back to Button's ROM, so it's OK to flash T-Mobile ROM.
However I still recommend to flash Button's ROM once more first.
starkwong said:
You can always go back to Button's ROM, so it's OK to flash T-Mobile ROM.
However I still recommend to flash Button's ROM once more first.
Click to expand...
Click to collapse
Well I decided to flash the t-mobile rom and it went smooth. Everything works fine. So now I have an IPL and SPL of 2.26 so I can flash some of the more interesting roms right? Thanks for all the help and advice guys. Much appreciated.
SharpieMarker said:
Well I decided to flash the t-mobile rom and it went smooth. Everything works fine. So now I have an IPL and SPL of 2.26 so I can flash some of the more interesting roms right? Thanks for all the help and advice guys. Much appreciated.
Click to expand...
Click to collapse
Yes you should now be CID unlocked and can flash any Rom you want as long as it does not contain an IPL/SPL.
And by the way, It does tell you in that WIKI exactly what you need to do to CID unlock your device. (The SPL will not downgrade to 1.05 unless you flash the button Rom again AFTER completing The Unlocking Process through lokiwiz. I wouldn't even reccomend flashing the button Rom again. It's pointless because Flashing the T-Mobile Rom is going to upgrade you IPL/SPL to a higher, matching pair and is going to give you a very strong, stable base rom to flash to a custom Rom From.
SharpieMarker said:
Well I decided to flash the t-mobile rom and it went smooth. Everything works fine. So now I have an IPL and SPL of 2.26 so I can flash some of the more interesting roms right? Thanks for all the help and advice guys. Much appreciated.
Click to expand...
Click to collapse
I think you should check your CID status with WST before trying to flash a custom ROM. Lokiwiz doesn't check for errors and proceeds as if everything went ok even if it didn't.
For all we know your phone might be originally from T-Mobile and even CID locked would always accept an official ROM.

Categories

Resources