Hi
Does the GPS on here work with TOMTOM?
I nearly bought the Nokia N95 but was told it wont work with TOMTOM.
Bhayani
Yes, I've used TomTom with my Vario III with no problems.
thx Dan
I am running out of excuses, will have to buy the phone soon.
Just for info the N95 works ok with TOMTOM
Are you sure it works with the N95 internal GPS? Because I read a lot in the internet that N95 internal GPS does not work with TomTom.
Well, my wife wants N95 She does not like Kaiser! But I always tell her that the N95 internal GPS does not work with TomTom.
And "No" if it works with external GPS.
Davebravey said:
Just for info the N95 works ok with TOMTOM
Click to expand...
Click to collapse
TomTom does work, but needs external GPS.
that's what i thought.
i knew it works with external gps , so back to my original question
does Kaiser work with Tomtom using the Kaisers Internal GPS?
bhayani
bhayani said:
that's what i thought.
i knew it works with external gps , so back to my original question
does Kaiser work with Tomtom using the Kaisers Internal GPS?
bhayani
Click to expand...
Click to collapse
TomTom works with the internal GPS of the Kaiser....
d
Yeah , read more here: http://forum.xda-developers.com/showthread.php?t=330235
Related
Hello,
I´ve had continous problems using tomtom 6 simultaneously with parrot ck 3000 car mounted. When a call incomes, tomtom6 locks and after the call pocket pc too. Sometimes appears on screen 'Your device is not compatible with this version of tomtom navigator'. Nevertheless and very important, same sd card with same maps runs perfectly in a ipaq 1940!!
Please help and thanks in advance.
Hi,
Seems like that alpine has SD card problem when using phone with Tomtom together.
Read many times that people suggest use MMC instead of SD card.
Thanks. I'm just trying that, but things seem to go same way...
Hello;
I purchased the HTC Tytn II, I not received it yet , I have a Hermes and a Wizard, I have a bluetooth gps that I use in all, those phones and my laptop, I was thinking to sell my wizard with the bluetooth gps to a friend but, Can I use the Tytn II as a bluetooth device in my laptop or in my Hermes?, if not I cant sell my bluetooth gps. I use in my MicroPC Microsoft Streets and in my Hermes i-GO. Can I use i-GO with the internal gps of the kaiser? What is TouchFlo? Thank You and sorry if that questions are answered in the site, I did not found them.
vijovame said:
Hello;
I purchased the HTC Tytn II, I not received it yet , I have a Hermes and a Wizard, I have a bluetooth gps that I use in all, those phones and my laptop, I was thinking to sell my wizard with the bluetooth gps to a friend but, Can I use the Tytn II as a bluetooth device in my laptop or in my Hermes?, if not I cant sell my bluetooth gps. I use in my MicroPC Microsoft Streets and in my Hermes i-GO. Can I use i-GO with the internal gps of the kaiser? What is TouchFlo? Thank You and sorry if that questions are answered in the site, I did not found them.
Click to expand...
Click to collapse
If I understand you correctly
1. you want to know whether you can share the GPS receiver in the Kaiser with your laptop - Yes but you will need something like Franson GPS Gate to share the built-in GPS signal over activesync or BT.
2. Yes, iGo works fine with th internal receiver.
kavi said:
If I understand you correctly
1. you want to know whether you can share the GPS receiver in the Kaiser with your laptop - Yes but you will need something like Franson GPS Gate to share the built-in GPS signal over activesync or BT.
2. Yes, iGo works fine with th internal receiver.
Click to expand...
Click to collapse
Yes, you understand me! Thank You!!!
Do you know what is TouchFlo?
TouchFlo is the finger scrolling of menus and panning pictures and web pages. It's inlcuded in the Tilt ROM.
vijovame said:
Do you know what is TouchFlo?
Click to expand...
Click to collapse
See for yourself
http://www.youtube.com/watch?v=Hyt_cygLAUo
Thanks!!!!!
Thank You Friends!!!!
newbie2 said:
TouchFlo is the finger scrolling of menus and panning pictures and web pages. It's inlcuded in the Tilt ROM.
Click to expand...
Click to collapse
Where in Tilt?
thanks
Hi there,
Has anyone made a TMC device working on the Athena?
I tried some version of the GNS FM9 adpaters but nothing worked.
Any ideas?
Thanks in advance for your help!
Have a good start into 2008.
greetz,
DAx
I agree - this would be very useful. I have iGo on my Ameo and it is brilliant (cant wait for iGo 8 or MioMap 2008 for the 3d visuals and road names) but it would be even better if I could get warned of upcoming hold ups on the major roads!
adamelphick said:
I agree - this would be very useful. I have iGo on my Ameo and it is brilliant (cant wait for iGo 8 or MioMap 2008 for the 3d visuals and road names) but it would be even better if I could get warned of upcoming hold ups on the major roads!
Click to expand...
Click to collapse
Hi,
just a question from my side:
I'm currently using igo with my Ameo and I have to wait and wait and wait and wait for the first GPS fix. It takes normaly between 5 and 15 Minutes until the first fix, even if I use the Quick-GPS Tool that comes with the Ameo. After that, everything works fine. How long does it take with your device and igo?
If I use my GNS GPS receiver (http://www.gns-gmbh.com/de/30_5843.php) I need only a few seconds until the first fix. And it supports TMC!!! I've searched a lot around to find another / cheaper solution to use TMC with the integrated GPS receiver, but I didn't find a working solution, so i decided to buy the GNS GPS receiver....
Regards
Andreas
AndreasF said:
Hi,
just a question from my side:
I'm currently using igo with my Ameo and I have to wait and wait and wait and wait for the first GPS fix. It takes normaly between 5 and 15 Minutes until the first fix, even if I use the Quick-GPS Tool that comes with the Ameo. After that, everything works fine. How long does it take with your device and igo?
If I use my GNS GPS receiver (http://www.gns-gmbh.com/de/30_5843.php) I need only a few seconds until the first fix. And it supports TMC!!! I've searched a lot around to find another / cheaper solution to use TMC with the integrated GPS receiver, but I didn't find a working solution, so i decided to buy the GNS GPS receiver....
Regards
Andreas
Click to expand...
Click to collapse
Hi Andreas,
hmm... thank for the link. That would be really the last chance to get TMC working for the ameo.
FYI, I use Mobile Navigator 6 and it fixes the gps signal really quick. I also use the Quick GPS and when I start MN6 the GPS signal fixes within 1 minute.
Greetz,
DAx
AndreasF said:
Hi,
just a question from my side:
I'm currently using igo with my Ameo and I have to wait and wait and wait and wait for the first GPS fix. It takes normaly between 5 and 15 Minutes until the first fix, even if I use the Quick-GPS Tool that comes with the Ameo. After that, everything works fine. How long does it take with your device and igo?
If I use my GNS GPS receiver (http://www.gns-gmbh.com/de/30_5843.php) I need only a few seconds until the first fix. And it supports TMC!!! I've searched a lot around to find another / cheaper solution to use TMC with the integrated GPS receiver, but I didn't find a working solution, so i decided to buy the GNS GPS receiver....
Regards
Andreas
Click to expand...
Click to collapse
Hi Andreas,
can you confirm that the GNS 5843 TMC work on the X7500 with Igo.
Thanks
Gigino
gigino said:
Hi Andreas,
can you confirm that the GNS 5843 TMC work on the X7500 with Igo.
Thanks
Gigino
Click to expand...
Click to collapse
Yes i.e. it works on my T-Mobile (Germany) Ameo with igo,
Cheers
Andreas
AndreasF said:
Yes i.e. it works on my T-Mobile (Germany) Ameo with igo,
Cheers
Andreas
Click to expand...
Click to collapse
Hey Andreas,
sorry to trouble you again but we are using the igo plus and the same gps as you the GNS 5843 but we can get the gps to work but not the TMC everytime we try to connect the TMC the pda just frezzes like the port has a conflict.
We have only been trying this in landscape mode can you tell me in which mode you are using the igo Portrait or Landscape.
Please can you help me in get this to work because I really like the Igo plus more the any anothe navigators.
Thanks
Gigino
Hi Gigino,
hmmmm, strange, for me it works. And yes, I'm using the landscape modus.
Sounds for me, that Igo uses the internal GPS receiver an tries to find a TMC connection on this internal GPS receiver.
Some Ideas from my side:
If you connect the GNS receiver via bluetooth, which serial port do you use? I've configured the bluetooth settings and then the COM-connections (I hope this are the right terms, I'm using a german ROM) with COM1 and secure connection. For instance Mobile Navigator 6 expects the TMC Signal only on COM1 and doesn't accept other ports.
The internal GPS Receiver is connected to Com4 on my system: GPS Settings -> Programms: Com4 and ->Hardware: None, 4800 Baud and -> Access: Automatic.
In a few words: internal GPS receiver on COM4, external GPS Receiver via bluetooth connected to COM1.
Do you have / use the test software from GNS to test, if youre GPS receiver is ok? You can download it on their page.
Last hint: Sometimes (Mobile Navigator6: every time!) you have to start the Navigator software twice to get a connection to the GNS 5843. It's a known bug for this receiver
Hope all this helps, otherwise contact me again
Regards Andreas
AndreasF said:
Hi Gigino,
hmmmm, strange, for me it works. And yes, I'm using the landscape modus.
Sounds for me, that Igo uses the internal GPS receiver an tries to find a TMC connection on this internal GPS receiver.
Some Ideas from my side:
If you connect the GNS receiver via bluetooth, which serial port do you use? I've configured the bluetooth settings and then the COM-connections (I hope this are the right terms, I'm using a german ROM) with COM1 and secure connection. For instance Mobile Navigator 6 expects the TMC Signal only on COM1 and doesn't accept other ports.
The internal GPS Receiver is connected to Com4 on my system: GPS Settings -> Programms: Com4 and ->Hardware: None, 4800 Baud and -> Access: Automatic.
In a few words: internal GPS receiver on COM4, external GPS Receiver via bluetooth connected to COM1.
Do you have / use the test software from GNS to test, if youre GPS receiver is ok? You can download it on their page.
Last hint: Sometimes (Mobile Navigator6: every time!) you have to start the Navigator software twice to get a connection to the GNS 5843. It's a known bug for this receiver
Hope all this helps, otherwise contact me again
Regards Andreas
Click to expand...
Click to collapse
Hey Andreas,
thanks for your help I well try again over this weekend.
They is another problem that I have and I've tryed everything but cannot resolve it.
I use the Igo Plus in landscape mode when I'm using the map and I get a reminder or a call the screen revertes to portrait mode and after accept the call or dismissing the reminder all the buttons in the Igo software goes all funny.
Do you have the same problem or have you find a way to correct this problem.
Thanks
Gigino
Ah I have this problem if the keyboard is attached but not if it isnt. What happens is that for some wierd reason the screen gets INVERTED! If you imagine where the button should be if it were upside down you can click it! Most odd!
adamelphick said:
Ah I have this problem if the keyboard is attached but not if it isnt. What happens is that for some wierd reason the screen gets INVERTED! If you imagine where the button should be if it were upside down you can click it! Most odd!
Click to expand...
Click to collapse
Hi,
I can confirm this also, the screen is inverted meens, that it looks ok, but you you have to touch it in an inverted way. I.e. the button is on the left upper corner of the screen, but you to click in the right lower area. Thats really strange. I've have the feeling, that this happens very often, if you use the Map view instead of the cockpit view.
@ gigino: I use the ameo with a brodit mount without the keyboard, so I don't have this problem.
In my last message is a little mistake, you have to switch OFF (and not ON) the automatic access in the GPS settings.
Regards
Andreas
i plan to buy a bluetooth gps receiver.
i just have some question before buying one
- will any bluetooth gps receiver work with niki? are there known receivers that will not work?
- i currently have a mapking software on niki and a map of my city, is the bluetooth gps receiver all i need for it to work? by work i mean it'll tell you where you are, where to go, etc...
thanks!
I have an adapt AD-350 bluetooth GPS receiver.
Works like a dime! It 'only' cost me 50 euro's (dixons, the netherlands).
Works with any app that can use GPS, (for all I know).
dekoning said:
I have an adapt AD-350 bluetooth GPS receiver.
Works like a dime! It 'only' cost me 50 euro's (dixons, the netherlands).
Works with any app that can use GPS, (for all I know).
Click to expand...
Click to collapse
looks nice thanks dude! i'll consider that brand, i hope they sell it in taiwan
my holux GPS (i forget the number) works great.
i use this : http://www.htcdirect.co.uk/index.php?main_page=product_info&products_id=289¤cy=GBP
solar powered sirf iii on my copilot7, all good
I use an Oasis BT GPS, wich are no longer available under that brand name but it works perfect with my downloaded tom tom software
you can find a lot on pdashop.be
succes!!
I use a Globalsat BT-338 and its wonderful.
I like the idea of a solar powered bluetooth gps
anyways thanks guys! will check out those you suggested! buying one tom
Navman B10
I just paired a NAVMAN B10 the $35 special from Expansys US. It is a SIRFIII and so far it works awesome. Cant really see why it was so cheap. Yet.....
kipmast said:
Cant really see why it was so cheap. Yet.....
Click to expand...
Click to collapse
maybe made in China? lol
Can I use these with Google Map? I mean that I don't need TomTom or another program at all?
I use this, "http://www.bluenext.co.uk/bluetooth-gps/bn-806f-bluetooth-gps.html"
works real good, it's real fast, good battery and have the last chip sirf star III, and of course all this for a good price
How to setup
Could someone tell me how to setup GPS connection over Bluetooth? I have a Nokia GPS which was working on normal HTC Touch and I just can't get it work on Nike... This is what I did:
1. Turn on GPS
2. Turn on Bluetooth on Nike
3. Search for BT device, Nokia is found
4. Enter code
5. Select serial port (the only port offered)
6. I create an outgoing port (e.g. COM2) for Nokia (in settings/connections/setting/bluetooth)
7. I set GPS program port to the previously created outgoing port in setting/system/External GPS)
8. I set GPS port number in iGO...
What did I wrong? Please help me.
Thank you in advance
That's all correct. I can't see what's the problem there.
Me neither... On my old iPaq (WinMo 2003) is a lot easier to connect as there is a connect feature in Bluetooth manager. In WinMo 2006 there is no such possibility... How can a bluetooth connection to GPS initialized without iGO? How could I connect from Windows to test the connection?
mapping software
i live in the us where can i get a free mapping software with map? because i dont want to access any data...
Hi all,
I was just woundering if you could use the tytn ii as a external gps device, such as switch on the bluetooth and it shows up as a gps reciever, is this possible?
i know you can get some software for the n95, such as extgps
thanks to anyone who replys
richard76 said:
Hi all,
I was just woundering if you could use the tytn ii as a external gps device, such as switch on the bluetooth and it shows up as a gps reciever, is this possible?
i know you can get some software for the n95, such as extgps
thanks to anyone who replys
Click to expand...
Click to collapse
Google search "use kaiser as external gps"
http://www.4winmobile.com/forums/htc-kaiser/15284-possible-use-kaiser-external-gps.html
Wow that was hard
Search for GPS2Blue.
I guess searching isn't the IN thing this year.