Hi,
I have english hw6515h and I upgrade it with french ROM, but it doesn't work and now the phone doesn't work. After power on, the screen is 'USB V0.21".
Thanks for your help.
Takodz
takodz said:
Hi,
I have english hw6515h and I upgrade it with french ROM, but it doesn't work and now the phone doesn't work. After power on, the screen is 'USB V0.21".
Thanks for your help.
Takodz
Click to expand...
Click to collapse
You can download the English version official update and run it.
Cheers,
Hi,
Thanks for your response, but doesn't work.
I do not find a file for this model.
Takodz
takodz said:
Hi,
Thanks for your response, but doesn't work.
I do not find a file for this model.
Takodz
Click to expand...
Click to collapse
Oh, the 6515h is from Rogers... You can recover it from "Rom12132beta" this version. Do a Google search you should find it.
Cheers,
Hi,
Thanks for your help, but when I try Rom12132beta , the installation begins (0.1%) , the HP screen goes to Serial then error occurs (Error 608: Could not initialize device).
Takodz
takodz said:
Hi,
Thanks for your help, but when I try Rom12132beta , the installation begins (0.1%) , the HP screen goes to Serial then error occurs (Error 608: Could not initialize device).
Takodz
Click to expand...
Click to collapse
Another way, Google the "6515d.bin" and upgrade it from SD card, I did both method without any issue... If this one still not working, maybe your device has some problems...
Cheers,
Thanks for your help, the solution is very simple, I replace Vista by Win XP in my computer and now I can upgrade rom.
takodz said:
Hi,
Thanks for your help, but when I try Rom12132beta , the installation begins (0.1%) , the HP screen goes to Serial then error occurs (Error 608: Could not initialize device).
Takodz
Click to expand...
Click to collapse
I had the same error (Error 608: Could not initialize device)
To resove it switch off the firewall on your PC!. For me it helped!
hp 6515H ROM problem
I try Rom12132beta , the installation begins (0.1%) , the HP screen goes to Serial then error occurs (Error 608: Could not initialize device )
i try XP and VISTA PC's but no luck
I have disable all the firewall still NO LUCK
i am using rogers RoMs update .. can someone tell me if this has been tested
Can some one advise me the correct ROM version for HP 6515 H
i am desperate to fix my phone .
I have called HP , they dont have ROM for above model,
Regards and Thanks in Advance
HP ipaq 6515H rom BIOS updrage,
Where can i get ANY orignal HP6515H ROM upgrade ,
This is crazy problem
ama61 said:
I try Rom12132beta , the installation begins (0.1%) , the HP screen goes to Serial then error occurs (Error 608: Could not initialize device )
i try XP and VISTA PC's but no luck
I have disable all the firewall still NO LUCK
i am using rogers RoMs update .. can someone tell me if this has been tested
Can some one advise me the correct ROM version for HP 6515 H
i am desperate to fix my phone .
I have called HP , they dont have ROM for above model,
Regards and Thanks in Advance
Click to expand...
Click to collapse
Do a hard reset.
Wait until Screen oriantation screen ( orange colour with "+" )
Do nothing to the pda only wait!
start upgrade in xp only
wait
this will upgrade your pda.
there is no special version for your PDA but
there is two version
1- 6515 c,d,e,f
2- 6515 h
You may check it out:
ftp://ftp.compaq.com/pub/softpaq/sp31501-32000/
or
you may google it with hw6515 1.21 rom upgrade.
I hope this will help you.
Related
Hi All,
I've tried to update my rom version to 1.22
When I do that, I get an error message: Connection Error.
Now, my Qtek don't boot. When I turn it on, I get a black screen with 2 words:
SERIAL
v2.06
At other threads somebody say that I must flash the rom with MTTY. Where can I download an Rom image? At www.qtec.nu I can only download an InstallSheeld, but I can't use that now because Activesync don't see my device.
PLEASE HELP ME !!
Thanks,
Danny
i had the same problem.
what i did was kill the update process in windows and start it again and it worked
[email protected]
Danido said:
Hi All,
I've tried to update my rom version to 1.22
When I do that, I get an error message: Connection Error.
Now, my Qtek don't boot. When I turn it on, I get a black screen with 2 words:
SERIAL
v2.06
At other threads somebody say that I must flash the rom with MTTY. Where can I download an Rom image? At www.qtec.nu I can only download an InstallSheeld, but I can't use that now because Activesync don't see my device.
PLEASE HELP ME !!
Thanks,
Danny
Click to expand...
Click to collapse
Danny, check my reply at http://www.pocketpc-club.nl/forum/showthread.php?t=45319&page=3
Grtz,
DUTCH
Serial 2.06
dear Danido,
i got the same issue and i got over it.
u need to go to search and find this file:
PDA2k_CDLWWE_11222_169_10200_SHIP
then do the installation while your ppc is in the cordl with power supply.
good luck
helpe me
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "
You cant post personal info...
muppet said:
i had the same problem.
what i did was kill the update process in windows and start it again and it worked
[email protected]
Click to expand...
Click to collapse
[email protected]
helpe me
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "
Reply With Quote
Click to expand...
Click to collapse
Erase your email if you want to share your mail to anybody pm them please. maybe you can find out the answer but if you post here please ask by this way i know is slow... but many people can check the answer if you all post all the process.
[email protected] said:
ihave qtek9090 .the problem its the device not open and(serial v2.06)apear
on the top & botom respectivly, and the pc not connect withe pocket pc
i need the rom & activesynch softwere
please reply me on" [email protected] "
Click to expand...
Click to collapse
since you already have a problem, please use windows xp for now.
i would try to actually downgrade to stock ROM first (please refer to wiki to get the correct stock from your device)
secondly, i would try
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
Hey Guys i would need some help here i downloaded the Helmi upgrade rom but didnt seem to work. i get the device connection error before it even starts
i downloaded the official rom that i found on this forum on this link
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
as u can c this is the one from the Imate website when i attempted to install it. it actually didnt give me a connection error and started to install but when the PDA rebooted i got that connection error back and now i am stuck at the bootloader screen with SERIAL written at the top and V. 2.06 at the bottom tried to soft and hard reset but nothing seems to happen i even disconnected the battery for 30 minutes but couldnt get it to boot
Anybody pleeeeeease heeeeeeeeeeelp!!!!!!!!!!
Thanx
Please give us more information.
What windows are you running? XP or Vista?
Do you have an error number?
I run windows Vista and the error number i get is 101 Connection error when i attempt to run BaUpgradeUT
on the PDA the only screen i fet is the bootloader screen with SERIAL and V.2.06
Ok, the problem in flashing our precious BA under vista is that you need to replace the usb driver with an old version so the updater will work correctly.
Search the forums for vista update or vista flash and you will get the answer and the driver you need.
thanks a lot i ll try it right now been waiting for this
OK i just searched for vista flash and found this post
http://forum.xda-developers.com/showthread.php?t=313001&highlight=vista+flash
tried it it worked done upgrading and now i have WM5 on my PDA2k
thanx alot u really saved my day
i am looking for imaginet arabizer for it now to fully enjoy the experience
And one more thing i have to thank Duanes who posted up the vista upgrading manual linked above Thank you
Hi! i've tried to load italian rom on m 6510b like i read on this forum but the proces blocked! now phone after HardReset load old configuration and during this proces stop on image of hp that wrote SERIAL on top and v0.21 down.
What can i do? there is a solution or i must send it to hp? thanks
--------------------------------------------------------------------------------
the problem was................windows VISTA!!!!!!!
pc with os xp did rom install
Have you called to HP technical service?
really i've tried to do but they have not reply to my email.
settems said:
really i've tried to do but they have not reply to my email.
Click to expand...
Click to collapse
Can your 6510 get into bootloader mode?
I'd bought my htc p3600 pro (black, free from sim-lock & free from any carrier) from London.
As advised by TRINITYGUIDES.INFO site I tried to do HardSPL with all the three available HardSPL files, but of no avail.
When the HardSPL's progress bar comes(on pc) it gives a message on my phone " Enterbootloader.exe....This may harm your device...Do you want to continue.." I pressed yes & the process stopped & gave an error on pc "Error 246 Device not responding" & on phone screen showed the bootloader with
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
I did soft reset on my p3600 & its working as usual with it original spl infos.
I want to put official WM6 SEA version(ROM+RADIO) on my phone...Please help.
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
wingnutLP said:
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
Click to expand...
Click to collapse
Search is great function
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67
wingnutLP said:
Sorry!
I am an idiot.
Thanks
Click to expand...
Click to collapse
sorry I tried a Google search on the error message and came up with this thread!
wingnutLP said:
sorry I tried a Google search on the error message and came up with this thread!
Click to expand...
Click to collapse
Search more...
With this link:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
if you search error 246 you will get the solution on 11th answer.
Search more...
Have the same [Error 246]! How can I definitly fix it?
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Some specifications....
Sorry.... I have a P3600 White with Olipro 1.20 and rom Elias 1.9 SE Lite...
Tompo81 said:
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Click to expand...
Click to collapse
Before flash manually enter bootloader. After start the rom update utility. (As www.trinityguides.info suggest). You will not get error 246 any more
thanks for answer
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Tompo81 said:
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Click to expand...
Click to collapse
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Ok, now I really understand
Ok, this is a very good anwser, short and clear... thanks...
Ciao
Tompo
fktsndr said:
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Click to expand...
Click to collapse
When i connect my touch hd to pc in active sync mode, then shutdown device an run in bootloader (volume down and power button at same time) i get the tricolor screen and after a while i get the progress bar on my phone and on pc. But i stays on 0% and says 'update error' after a while.
please help
I Have the Same Problem the Status bar Freeze On 0% and nothing happened
Until the Update Error Message Displayed
Please Advice
Thank You
Note: I Have HTC Diamond2 (Topaz) Without Sim Louk
Hi Me has the trinity 3600 as a VPA GPS vodafone branding, and i get the same error message trying to run the bootloader and entering tricolor screen, ---> error 246 aber manually starting into bootlaoder and restatrting the romupdateutil.exe same error 260 no connention...
So you guys have a working version of the updating ?
And please remove all the links which are not working, linking a solve for the 246 problem, there are nomore links available...
thanks
Dome
I found a way to solve the problem 246 go in you mobile device, -->start -> settings-> connections ->USB to PC open this. Remove the hook @ Advanced networksettings activation! ---> click OK--> close
try again the bootloader etc, then on the tricolore reboot screen is shown USB in the lower white field and the bootloader can do its routine complete.
Have Fun with flashing the phones!
Testet with original German Vodafone available ROM " vpa_comp_gps_RUU_Trinity_VF_DE_1_23_162_4_6275_1_29_00_01_13000_108_Ship.exe "
testet with ZackMcRofls superfast german rom " RUU_Trinity_GER_1.23.162.2_GPS_v3f_by_ZakMcRofl "
testet with
" htcp3600_RUU_Trinity_HTC_GER_1-23-407-2_103_6275_1-38-00-11_108 "
First was Zack´s rom, 2nd. was Original Rom, 3. was Trinitys rom, after trxing all, i flashed Zacks Rom again, it was the best in my view.
Thank you verymuch, bb
Hi I have got a problem and i hope that you can help me
While flashing my X1 via USB there was an error message and flashing was interrupted.
I was doing the "recovery steps" that the programm gave me but it didn´t work.
When i started my x1 again there was the tri color screen.
(
RUUNBHKOVS110
SPL-0.72.OliNex
MircroP1-787
MircroP2-707
Upgrade ROM code error
Please try again_Nothing_
Serial)
I already used the board search and google but i cant fix it.
The Window Mobile Device Center isn´t connecting with my x1 and if i try to flash it again it stucks on 0% and after that there is again an error message.
Please help me
I dont know if it is important but i have got win7 x64
greetings
Try flashing with the sd-card method...
Apfeltorte said:
Hi I have got a problem and i hope that you can help me
While flashing my X1 via USB there was an error message and flashing was interrupted.
I was doing the "recovery steps" that the programm gave me but it didn´t work.
When i started my x1 again there was the tri color screen.
(
RUUNBHKOVS110
SPL-0.72.OliNex
MircroP1-787
MircroP2-707
Upgrade ROM code error
Please try again_Nothing_
Serial)
I already used the board search and google but i cant fix it.
The Window Mobile Device Center isn´t connecting with my x1 and if i try to flash it again it stucks on 0% and after that there is again an error message.
Please help me
I dont know if it is important but i have got win7 x64
greetings
Click to expand...
Click to collapse
As per what Lokatho mentioned,
in case you didn't know what it meant:
read that:
http://forum.xda-developers.com/showthread.php?t=445662
hope you could revive your X1.
Cheers!!
hmm ok i´ll try it :/
i hope that it works 'cus my X1 is new >_<
I'd suggest SD Method as well...
Additionally you could plug your X1 (while in three-color-screen, also known as Bootloader) inot your USB and start the RUU again.
Both should work.
@ wolf
I already tried it.
Everytimes the same error code something with connections problems don´t know why yesterday it worked :/
is this solved then?
Mod. edit: not dev related, moved to general