T-mobile MDA Hotspot @ Home? - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I hate to post topics that might have been covered...but i've searched and searched until i got a headache and figured I'd just ask....
From what I understand, from a t-mobile representative I know, there is a download able patch for the wing that will allow you to use hotspot @ home (that is use your mobile phone and mobile phone number to place calls through ANY active wifi network you can connect to) and also one for the sidekick..which is irrelevant considering the platform...
Anyways, I have a wing and went to t-mobiles site and see nothing about downloading this fabled update but haven't found anything.
Long story short: does this exist, and if it does, has anyone tried messing with it (i.e. cooking something up) so it works for the MDA?
I love my MDA and the wing is really..well...the same thing, with a few new lame features.

I, too, have a T-Mobile MDA and REALLY want to use this service. I can't understand why I wouldn't be able to utilize the MDA's built in WiFi features with the service. Anyone done found any helpful hints since this thread was originally posted?

I understand this thread is old, but wanted to chip in and voice my curiosity for this as well.
I have the MDA and have been very happy with T-Mobile. But after moving to a new place recently, I have NO coverage inside my home.
The MDA is a very capable phone and I'm sure that [email protected] is usable on it with just a software installation. Although, does anybody have a clue as to how to make that happen?

xdamaddy said:
I understand this thread is old, but wanted to chip in and voice my curiosity for this as well.
I have the MDA and have been very happy with T-Mobile. But after moving to a new place recently, I have NO coverage inside my home.
The MDA is a very capable phone and I'm sure that [email protected] is usable on it with just a software installation. Although, does anybody have a clue as to how to make that happen?
Click to expand...
Click to collapse
The only WM phone that I'm aware of that can possibly be used with [email protected] is the Hp IPAQ 510 that has not been provosioned for AT&T.
There are two SKU's for this phone-one for AT&T, and one that is unlocked.

Related

PLEASE HELP! Kaiser not working with T-Mobile UK

Hi,
I've just got my Tytn II and bought seperately a T-Mobile UK SIM to use it with. When I switch the unit on I get a warning message saying "Smartchip not provisioned MM#2". I can't then connect to the network- I just the "no service" message.
The phone detects all the available networks fine, and I swapped in an O2 SIM from my old universal, and it worked immediately- so the Kaiser is working fine.
I tried Googling the error without success, so you guys are pretty much my last resort... I see from this forum that some people seem to have it working on T-Mobile UK.
I hope it's something really stupid that I'm not doing! Does anyone have any ideas on this?
I've been reading these forums for a few years now, but this is my first actual post. I know if anyone can help, you guys can
Tim
I have my TyTN II working on T-Mobile fine. I just put the SIM card in and it worked.
Maybe you have an old SIM which is not fully compatible. How old is the SIM.
It's a brand new SIM, only arrived on Friday.
I'm waiting for another unlocked phone to try the SIM on to see if it is defective. THanks for the reassurance that yours is working- it gives me some hope!
So may be T-Mobile's reasons for delaying the Vario III were actually true!!!
Mine's working fine
Old SIM as well, around 18 months old!
I can also say that my T-Mobile sim is working fine and this is about 14months old, just put it in and installed my T-Mob 3g/mms setting myself and all is well.
Can browse the web receive push email and send mms no problem at all.
must be the new sim, try activating the sim on another phone first if it has not been activated yet, and then once activated and working, put it back in the kaiser. does seem very strange though.
Same here, auto-configure settings working perfectly!
Although it seems to have setup a separate connection for Picture messaging... has yours done that?! Can i just delete that and tell it to use the normal 3G connection? :S
Try T-Mob support
Either take it back to the shop or contact them via the website, I've found them quite responsive on the few occasions I've used them.
Gordon
I found this on Expansys.nl site:
Real good phone, ... but nothings perfect
bij Anonymous - maandag 10 september 2007
Its the best ppc i've had, but not flawless like everyone loves to say. 1. The slider is implemented backwards. No, this is not just something trivial because the rotate screen button and the camera both rotate the screen wrong. Also its not convenient for right-handed people. 2. The stylus should drop in at the top, not the bottom. 3. There is no hardware control for the volume. 4. You have to buy an adapter to use regular headphones. 5. Google maps keeps losing the gps signal (although tomtom works fine). Also t-mobile can't take advantage of this phones 3g capabilities which is unfortunate. Every other review is going to say this phone is the greatest invention since god, but I just wanted to point out its not perfect. That said, I am still happy with my purchase and would recommend it.
PLease note the text in Red, what might that mean ??
Maybe it was referring to US T-Mobile, since it is supposed to use 1700 when the 3G is going live?
I haven't seen a lack of 3g mentioned for T-Mobile UK, but may be the Netherlands are different. My problem is more that I can't even get it to connetct to the network... I'm going to try the SIM in a different phone tonight and see if it's broken.
Churchill,
That is not true!
I use T-Mobile NL and subscribed to "Pocket Internet Totaal Plus" :
- Max 192 Kbit/sec download
- Max 32 Kbit/sec upload (if I am not mistaken)
- 19.95 euro / month
- Unlimited usage
My SIM card is very old, I have been using it since few years ago.
The T-Mobile NL 3G is working just fine.
I got the "3G" icon all the time and managed to test the connection with dslreports.com and got 144 Kbit/sec.
Yesterday I tested the internet connection sharing, so I connected the Kaiser to the internet and plugged it to the laptop.
It worked fine! The speed was constant 30 KBytes/sec (tested by downloading big file).
So, I confirmed you that T-Mobile NL is working fine.
PS: One thing that still puzzled me, why dont I get HSDPA (3.5G) connection??? The "H" icon. I tought that T-Mobile has HSDPA already.
Maybe if I subscribed to "Internet Totaal Plus" (1.8 Mbit/sec, 69.95 euro / month) I will get HSDPA ... but, it is toooooo expensive!
Churchill said:
I found this on Expansys.nl site:
Real good phone, ... but nothings perfect
bij Anonymous - maandag 10 september 2007
Its the best ppc i've had, but not flawless like everyone loves to say. 1. The slider is implemented backwards. No, this is not just something trivial because the rotate screen button and the camera both rotate the screen wrong. Also its not convenient for right-handed people. 2. The stylus should drop in at the top, not the bottom. 3. There is no hardware control for the volume. 4. You have to buy an adapter to use regular headphones. 5. Google maps keeps losing the gps signal (although tomtom works fine). Also t-mobile can't take advantage of this phones 3g capabilities which is unfortunate. Every other review is going to say this phone is the greatest invention since god, but I just wanted to point out its not perfect. That said, I am still happy with my purchase and would recommend it.
PLease note the text in Red, what might that mean ??
Click to expand...
Click to collapse
Gogol, thatnx for the reasurance.. I am right now on the Pocket internet Totaal woth 64kbps and once I prolong I want to take the Plus version for 19,95 since the first year is half the price.
I beleive that H icon shows only if you go to HSDPA speeds. I was able to reach those speeds of up to 1Mbps on my current subscription (pocket internet Totaal) because there was a whole in the ssytem by T-Mobile. If you get the Pocket Internet Totaal in T-Mobile shop (mind you onlyu t-mobile shop) you were able to just surf in HSDPA. That lasted about 10 months for me after which they capped the connection to 64 Kbps so I am a real unhappy man right now, so Once the Keiser is availbale by my reseller I am going to take the Plus version for 19,50 a month.....
Gogol,
Are you Dutch??
Original Issue fixed
Just a note to report that my original problem seems to be fixed. I just put the SIM card in another phone and it worked. Then transferred it back to my Kaiser and the error had gone.
I have no UMTS, but I'm pretty sure I just haven't found the right setting. Does anyone know if T-mobile UK has HSDPA yet?
Churcill, No I am not Dutch. But I live and work here in the Netherlands for couple of years already. Love the country
I can understand Dutch pretty much, but no speak
And you?
Churchill said:
Gogol,
Are you Dutch??
Click to expand...
Click to collapse
tim456 said:
Just a note to report that my original problem seems to be fixed. I just put the SIM card in another phone and it worked. Then transferred it back to my Kaiser and the error had gone.
I have no UMTS, but I'm pretty sure I just haven't found the right setting. Does anyone know if T-mobile UK has HSDPA yet?
Click to expand...
Click to collapse
T-Mobile UK allows HSDPA although dependent on what handset you signed up for with them you may not have it enabled on your account. For example if you bought say a Vario II from them then this is now enabled by default on the account. You may need to speak to 150 to get it enabled.
gogol said:
Churcill, No I am not Dutch. But I live and work here in the Netherlands for couple of years already. Love the country
I can understand Dutch pretty much, but no speak
And you?
Click to expand...
Click to collapse
I am living here since 2002 (my Wife is Dutch) I love the place.. The reason I asked is because of your screen name. Gogol was a famous Russian Writer who's works we had to learn in School (I grew up in the former Soviet Union) so that is why I am asking what nationality you are..
tim456 said:
Just a note to report that my original problem seems to be fixed. I just put the SIM card in another phone and it worked. Then transferred it back to my Kaiser and the error had gone.
I have no UMTS, but I'm pretty sure I just haven't found the right setting. Does anyone know if T-mobile UK has HSDPA yet?
Click to expand...
Click to collapse
I am using Vario II on T-Mobile UK, it DOES have HSDPA, I got the H icon. You need to ask them to activate the HSDPA service for you if they haven't done so.
Ah, I see .. no I am not Russian Gogol was picked out of nowhere
The Pocket Internet Totaal Plus (PITP) is quite nice, although the network latency is still pretty much high. Sometimes lagging for several seconds
T-Mobile NL is still the cheapest 3G provider, right? I havent checked around yet (will do after this).
Churchill said:
I am living here since 2002 (my Wife is Dutch) I love the place.. The reason I asked is because of your screen name. Gogol was a famous Russian Writer who's works we had to learn in School (I grew up in the former Soviet Union) so that is why I am asking what nationality you are..
Click to expand...
Click to collapse

"Unlocked" Tilt on Rogers -- no voice calls

Hi guys...sorry if this is already answered here, but I just got a supposedly 'unlocked' AT&T Tilt from eBay and put in my Rogers SIM card. It seems to work OK on the data side of things - gleefully accessing the internet and even syncing my email, but I can't get the voice calls to work. Even shows '3G' for the data connection.
Whenever anyone calls me, they get a couple of rings and it goes to my voicemail. If I try to call out, it dials, then immediately ends the call when it tries to connect.
The SIM card is OK I know, since it works in my Eten X500 just fine.
Do I have to do something to the phone to completely remove the AT&T stuff?
Help...I love the phone, but if it won't make voice calls....
Thanks.
/drt
I had this same problem on ATT in the US. They kept trying to tell me it was a problem with my phone, although I knew this wasnt the case because I had 2 tilts in a row that did this. I called them and eventually got through to a higer level tech, tier 2 I think. I'm not completely sure what he did but he fixed it. It was a problem on their end.
I was able to use data as well, just no calls. It would drop them as soon as I made them.
Call Rogers, they will probably work it out.
You need to flash your tilt with a different version of radio and it will work.
asfoor said:
You need to flash your tilt with a different version of radio and it will work.
Click to expand...
Click to collapse
Thanks... any particular suggestions? I'm thinking of flashing the unit with QMobile 1.2, but I don't think that comes with a radio ROM...I guess I should pick one up from the Upload area?
Thanks again for the help.
/drt
xconradx said:
I had this same problem on ATT in the US. They kept trying to tell me it was a problem with my phone, although I knew this wasnt the case because I had 2 tilts in a row that did this. I called them and eventually got through to a higer level tech, tier 2 I think. I'm not completely sure what he did but he fixed it. It was a problem on their end.
I was able to use data as well, just no calls. It would drop them as soon as I made them.
Call Rogers, they will probably work it out.
Click to expand...
Click to collapse
I may give that a try, but Rogers doesn't provide support for phones they don't sell. I think I will be SOL once they find out I'm connecting with a 'non-standard' phone.
/drt
drtolson said:
I may give that a try, but Rogers doesn't provide support for phones they don't sell. I think I will be SOL once they find out I'm connecting with a 'non-standard' phone.
/drt
Click to expand...
Click to collapse
rogers is really bad when it comes to supporting phones they don't have. You may want to call them and lie, and say you and a TYTN instead of a Tilt, and see if they will try to help.
That being said, I know about 3 guys that have gotten either a TYTN II or a Tilt in the Vancouver area and have popped in their SIM card and everything has worked just fine, including myself. Have you tried flashing a different radio - I am using 1.27.12.17 - perhaps the At&T radios don't work in Canada?...just a thought
here is a link to the radio thread, where you can download the 1.27.12.17 radio...
http://forum.xda-developers.com/showthread.php?t=349375
zakhir_n said:
rogers is really bad when it comes to supporting phones they don't have. You may want to call them and lie, and say you and a TYTN instead of a Tilt, and see if they will try to help.
That being said, I know about 3 guys that have gotten either a TYTN II or a Tilt in the Vancouver area and have popped in their SIM card and everything has worked just fine, including myself. Have you tried flashing a different radio - I am using 1.27.12.17 - perhaps the At&T radios don't work in Canada?...just a thought
Click to expand...
Click to collapse
OK, the radio I currently have is 1.27.12.11. Do I have to HardSPL before I install the new radio? Also, I notice you've SuperCID unlocked as well... do I need to do that also?
Thanks for the link to the radio file.
/drt
Well, I got it to work, but...
The ongoing saga continues....
a) HardSPL'd and Flashed in a new radio 1.27.12.17. No change.
b) Played with the network settings a bit, and could occassionally get the phone to 'downgrade' to an Edge cx, and voila! the phone started working. But AT&T's software doesn't give me the option to 'hold' it there.
c) Talked to Rogers tech support -- pretty helpful really. They asked for the # of my SIM card and said it wasn't a '3G' card (it IS pretty old) and suggested I get a new one from the local guys. Went up, got one for free (since I gave them my old one) and tried it -- No luck, same problem.
d) Flashed QMobile 1.2 ROM -- still getting the at&t screen on initial startup, but everything else seems good and the HTC-ish stuff it's supposed to be.
e) Went to configure the phone band settings. If I leave them on 'Auto', it finds the Rogers 3G network and hooks up, but the same problem arises -- when it finishes dialing and tries to connect, it just ends the calls. And incoming calls go directly to my voicemail. HOWEVER, if I specifically configure it for GSM network and the 1900+850 bands, then it locks onto Edge and the phone works fine.
I guess it's back to tech support with Rogers to see what they have to say about my account, etc.
Very Weird.
/drt
similar looking thread here which might be helpful
http://forum.xda-developers.com/showthread.php?t=335074
Im personally still using the original at&t tilt radio ver 1.27.12.11 on Rogers and haven't had problems with voice on 3G. I haven't ever used a data connection with Rogers however..
Comatose said:
similar looking thread here which might be helpful
http://forum.xda-developers.com/showthread.php?t=335074
Im personally still using the original at&t tilt radio ver 1.27.12.11 on Rogers and haven't had problems with voice on 3G. I haven't ever used a data connection with Rogers however..
Click to expand...
Click to collapse
Yup...from that thread, the description sounds EXACTLY like the difficulties I'm experiencing. It appears to be a hardware failure... Unfortunately, I bought from a guy on eBay, so I'm not sure I can send it in for repair. It works on Edge though, and that will be good enough for now.
Thanks everyone for the help.
/drt

Softbank settings on HTC TYNT II

I know this has been answered in several treads, but I can not make it to work.
I am trying to configure flat rate internet setting on my htc phone, but it seems i can not get password to populate.
I have an original HTC unlocked phone. Can somebody please provide step by step instructions with required files on how to perform the required steps to start using flat rate plan from softbank.
Thanks.
oablokhin said:
I know this has been answered in several treads, but I can not make it to work.
Click to expand...
Click to collapse
Google search for it on XDA. The threads there made it work for my Kaiser, but since I was on Softbank rental sim (which doesn't offer flat-rate data), the password populated and worked, but I still get billed by 128byte chunks.
I actually am on Softbank with an unlocked kaiser (just have a SIM contract). There were some instructions (in japanese) to get the open.softbank.ne.jp to work. I was testing it out cautiously for the first month and it seems to work fine. However, from yesterday I can't even make phone calls or get a data connection. When i try to make a call it tells me to call customer service, when i try to make a data connection, it tells me the answering modem has been disconnected.
I plan on calling Softbank tonight to see what's up. If it's just a technical glitch, i'll post what i did to make everything work. If they locked me for using open.softbank.ne.jp...oh well...i guess i'll try docomo!
I followed the instructions for setting up the open softbank connection, am using an HTC branded kaiser from Hong Kong so no lock, and as of 15 mins ago my data still working sweet.
Just download the prepared softbank package from the other thread, there is a readme, pretty straight forward but I can say it is working.
Another possibility is from tomorrow emobile will have kaisers here on data plans for half the cost of softbank. I would love to get an emobile sim and setup a connecdtion with them. But you know how it is here. The moment I asked the know nothing guy standing next to the phones about getting just a sim contract things get oh so complicated... sigh...
RayB said:
Another possibility is from tomorrow emobile will have kaisers here on data plans for half the cost of softbank. I would love to get an emobile sim and setup a connecdtion with them. But you know how it is here. The moment I asked the know nothing guy standing next to the phones about getting just a sim contract things get oh so complicated... sigh...
Click to expand...
Click to collapse
Will the Kaiser work on emobile since they're using W-CDMA 1700MHz? If it does, without a new radio firmware, then there's hope of using the Kaiser on T-Mobile USA's 3G AWS W-CDMA 1700.
I tried installing the emobile Sim card in my unlocked kaiser (friend had a demo emonster) and it doesn't work (probably due to the 1700Mhz). I'm a newbie, so can you tell me if the the radio can be set through a firmware upgrade or is it a hardware issue?
eMonster ROM needed
Hi i have the emonster. But i am having some trouble with the ROM. Anyone know where to get the factory ROM for emobile emonster S11HT KAIS140 SPL-3.06.0000 CPLD-8 RUUNBH?
TyTN II on Softbank
Could anyone help me reset the setting to enable this phone to work properly on Softbank. I am not sure what priceplan I'm on so whatever settings you can give would be great...
I have tried talking with Japanese staff but my Japanese is not good and their English is even worse.
It is so difficult to get a straight answer. I know this phone works here as I did nave it working a couple of years ago, but due to some changes in Softbank, it doesn't seem to work now..... Could someone please help me with a set of settings.
I am using Windows mobile 6
Thank you very much in advance...
Matt:crying::crying::crying::crying:

Diamond sends SMS after each boot

I got me a Touch Diamond in the rounder shape of the T-Mobile MDA Compact IV. It came in a sealed box from eBay and I've used unlocking software that I also found on eBay. As it turns out, this software seems to originate from this forum.
As far as I've researched it, right after the lock was removed, the phone started sending SMS messages to the number SMS032837 each time it is reset (since I've never used this phone locked it *could* have done this already, but I doubt it). Even if I switch off the GSM radio, and then reset, the phone waits for the radio to come back on and immedately sends a message.
I have no clue to what's the message is about or whoever is the recipiant but that's not the main issue here; it should not do this, period.
ROM: 1.37.110.3
Radio: 1.20.OliNex
Protocol: 52.26a.25.09U
Anyone any idea what is going on?
TIA,
XDArjen
sorry i dont have any idea
try this steps
1-try hard reset
if not work
2- you have an old ROM so
upgrade it to the latest ROM for your country or use cooked ROM if you want
Could a program similar to RemoteTracker be installed on your Diamond ?
That would explain the SMS, as the software detects that you changed the SIM card.
yea sounds like some program like remotetracker, try flashing a new ROM, as i assume it's build into the ROM by the seller, no idea why though.
xdarjen said:
I got me a Touch Diamond in the rounder shape of the T-Mobile MDA Compact IV. It came in a sealed box from eBay and I've used unlocking software that I also found on eBay. As it turns out, this software seems to originate from this forum.
As far as I've researched it, right after the lock was removed, the phone started sending SMS messages to the number SMS032837 each time it is reset (since I've never used this phone locked it *could* have done this already, but I doubt it). Even if I switch off the GSM radio, and then reset, the phone waits for the radio to come back on and immedately sends a message.
I have no clue to what's the message is about or whoever is the recipiant but that's not the main issue here; it should not do this, period.
ROM: 1.37.110.3
Radio: 1.20.OliNex
Protocol: 52.26a.25.09U
Anyone any idea what is going on?
TIA,
XDArjen
Click to expand...
Click to collapse
Hi,
I`ve got MDA Compact IV on T-Mobile UK with original ROM and Radio (I just need to) and I`ve noticed that after every re-boot it sends above mentioned by you text.
Actually, it sends 2 texts: 1st to 32837 (on the on-line bill it`s clasified as
"unbranded" and it`s free of any charge)
2nd to 100203005 (clasified as "SMS text messaging" and it is also free).
I was surprised as well, so started to investigate.
I`ve found that above texts got something to do with W`n Walk service and T-Mobile My Faves and they are like a system messages.
They are NOT using any of the tariff allowances and they are completely free.
I`m sure because I`m checking my bill very carefully every month and it is my 3rd bill since I started using Compact IV.
I think that every HTC Diamond and MDA Compact IV sends those texts when logging into GSM Networks, but not every network provider shows them on their bills. With T-Mobile it shows on My T-Mobile On-Line account, but not on any paper or electronic bill.
There is more info about the case on other forums, just "google" them numbers and you will find it.
So, DON`T PANIC, everything is in order.
P.S.
My handset is unlocked and I was using foreign SIM card with, whilst on holiday and I haven`t noticed any extra charges for above texts, nor any other problem.
Regards.
snark_be said:
Could a program similar to RemoteTracker be installed on your Diamond ?
That would explain the SMS, as the software detects that you changed the SIM card.
Click to expand...
Click to collapse
Hey snark_be,
I'm not sure, it's a brand new T-Mobile that I got in a sealed box. The owner got it as an upgrade but didn't want it. So it came locked to T-Mobile and I had to unlock it since I'm not a T-Mobile customer.
Could T-Mobile be using this tracking method? The seller of the unlocker could have added it, I don't know, he hasn't answered my email (yet).
The SMS goes anytime the device boots, not just after inserting the SIM.
HTC ROM upgrade site rejects my serial number if I want to download a new ROM.
Addicteddddd said:
yea sounds like some program like remotetracker, try flashing a new ROM, as i assume it's build into the ROM by the seller, no idea why though.
Click to expand...
Click to collapse
That was the plan, but that seem's a bit of a hornet's nest. Can I assume safely that the T-Mobile is a true HTC Touch Diamond? Will I be able to return to non-brick if something doesn't work? I mean when I install Hard-SPL first (it's installed already by the unlocker, but an older version, like 1.24)?
kowalsky_tom said:
Hi,
I think that every HTC Diamond and MDA Compact IV sends those texts when logging into GSM Networks, but not every network provider shows them on their bills. With T-Mobile it shows on My T-Mobile On-Line account, but not on any paper or electronic bill.
Regards.
Click to expand...
Click to collapse
Tom, they show up on my bill, so I have to pay for them. And my provider logs them as International calls.
I don't have the luxury of sitting idle because it make the device useless as a phone. I will peruse the forum about this matter but I was already planning upgrading the ROM as I find the device very unresponsive.
have a look in the rom section here and install a new one
xdarjen said:
That was the plan, but that seem's a bit of a hornet's nest. Can I assume safely that the T-Mobile is a true HTC Touch Diamond? Will I be able to return to non-brick if something doesn't work? I mean when I install Hard-SPL first (it's installed already by the unlocker, but an older version, like 1.24)?
Click to expand...
Click to collapse
Just flash the latest HardSPL, 1.93 I think, and then head over to the Diamond Wiki and download/flash the newest WWE ROM you find (1.94 I think).

T-Mobile Setup on HTC Tilt

I called up ATT and got the unlock code for my friends old HTC Tilt, unlocked and placed my T-Mobile SIM card in it which has an active voice + text + web account on it, with the default ATT Rom on it I was only able to set it up to do voice and text, whenever I tried using the Data connection for like let's say IE it would bring up a page for web2go, even after Flashing the phone with different ROMs I found on this great site and went through the auto communication setup for t-mobile, and still it only does voice + text, any ideas?
Right now here are my specs:
HTC Tilt
R: 1.70.19.09
G: 25.83.40.02H
D: 3.TPCElite
HardSPL 3.29
Let me know if you need any more info..
Call T-Mobile Support
Same thing happened to me last night. I called them this morning and they fixed it in about 10 minutes.
ok cool, so I should just call them up and they should be able to tell me what to do? or do you know how?
thanks in advance,
-b3ck
There should be a cab file somewhere that sets it all up for you.
I called up T-Mobile and talked with one of their non-supported device technicians (they have an entire support dept. of these guys) and it was actually on their end, they had to allow the IMEI to use the Data plan, because basically the phone was like Hi let me use the Data on the Network and the network was like what's your name? and the phone was like I'm John Smith, and the network was like your not on the list sorry.
So.. yea I was talking with a very smart tech support lady @ T-Mobile, she even mentioned these forums, she said she recommends it to people that have devices that aren't supported by t-mobile she even wanted to know which ROM I flashed onto my Tilt =)
Anyways everything is good to go now, thanks everyone!
-b3ck
Did you have to slip here a fiver?
ChumleyEX said:
Did you have to slip here a fiver?
Click to expand...
Click to collapse
huh? I don't know what that means..
I have an issue. I just switched my entire plan over to the even more plus. On my old plan I had tzones and it works great for everything. Now I have the web2go. The problem is not getting the device to work on the internet2.voicestream.com, that works fine, but it is the battery drain. In a 4 hour period it will kill a full battery. When I remove the internet2 setting then the battery lasts all day. anyone else see this issue. BTW I'm using the JJblaster 23518 and radio 1.70.18.02
what do you all think, a bit odd for it to drain the battery that fast?
b3ck said:
huh? I don't know what that means..
Click to expand...
Click to collapse
Doh it should have read, "did you slip HER a fiver" in other words, did you tip her?

Categories

Resources