Hi, Well i came here and found WM6 install for the BA and so i go and try and install it, i think nothing of it. Then the installer comes up saying that it cant detect my phone so i go and look at my phone and Its just a gray screen with Serial at the top and V 1.02 at the bottom. Man, i just got this phone and im hopeing i didnt screw it up already =/ this freaking sucks. Can anyone help me please
Are you using USB port to connect your phone? If you are your usb connection is not working because it will show usb on the screen rather than serial. Need to check your usb connection if you are using usb.
Well, it says that when i got it conected to the dock, But serial when its off.
If it says that then the usb connection is AOK.
Hmm... You mean you havent installed it yet?
Try "Hard Resetting" then reDo the process of Upgrading step by step... maybe you missed something.
I think that as long as your bootloader is intact. You can install your OS definitely, I think, correct me if im wrong. coz that happened to me and i revived my BA.
Well it was just an installer, I ran the .exe and it was like "Installing WM6!!" then it just cut off and did this crap. So is there annother way to install it? did i do something wrong?
Well i tried "Hold down the Power button (Top Right corner) and at the same time put your Stylus pen in the hole where it says “Reset” (Lower Left corner)." But the screen lights up and then goes blank then it pops up with the serial jazz. I hope i can get this fixed because i cant afford a new phone.
Try pressing/hold the (Record Button) + (Power Button) Then Stick the (Reset Button)...
that'll make it go into the Interface Mode(Bootloader) that's either Serial or USB... then try to flash it again.
Well, I do that and the screen does the same thing, when i hook it up to the dock it does the famose xp Bedunk sound saying it knows something is conected. How do i install the thing again if active sync cant find it?
Okay, well i went to try and install it anyways and it seemed like it worked... why do i have such bad luck?
Well now after it was complete n i did the soft reset, It has 4 big bold Color lines, and at the bottom it says
No GSM
D 5.60.00 WWE
=/ whats that mean? Im too damn young for all this technical crap man, any help, please...
Hey xXBuddahXx
It-s all good... Just reset the device pushing the pin with the stylus and everything will be fine...
Anyway, like SilverSamurai said..., if you can get into bootloader mode then you're fine...
Make sure you upgrade using the MaUpgradeUt_noID app and follow carefully the instructions step by step: http://forum.xda-developers.com/showthread.php?t=326532
My first upgrade to another 2003 firmware was a nightmare and many times I've felt my heart pumping like it was gonna burst just looking at my beloved BA not booting... And since I think I installed almost every ROM I could get my hands on.
My advice, try again cos Helmi's WM6 Pro really rocks and it's the most stable I've seen so far...
Good luck,
Brice
Related
ok ive just bought an M2000, which is currently on orange, well i think it is, its got the orange logo on the front. i want to put an orange sim card into it,however it just says the service provider is locked. ive tried unlocking it with some software but that hasnt seemed to have worked? anyone got any advice or point me in the right direction of what to do?
cheers
much appreciated
http://forum.xda-developers.com/showthread.php?t=240784
this seems to work for nearly all - it worked for my XDA2IIs just fine
yeah ive done all that the only problem is... when i go to run the program that it tells u to download onto your phone, my phone wont run it and it says the program is not a valid pc application
any one know how to fix that?
ahhh ok.. well the program didnt work but i no longer have to use a code... the phones actng a bit crappy now and wont load certain things up.. i think ive broken it. does anyone know how i can reset the phone. and reinstall the original windows mobile 2003??
cheers???
I dont think you have broken your phone but
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
(the section is called How to upgrade to the lastest ROM (currently 1.42))
but you can read more
1. Do a hard reset to bring it to the original state.
2. Unlock it
3. Upgrade your ROM to what ever version you want.
Here is how you do a hard reset.
--------------------------------
Hold down the Power button (Top Right corner) and at the same time put your Stylus pen in the hole where it says “Reset” (Lower Left corner).
My Tilt began having issues just the other day. The screen would periodically fade out and go white. I would soft reset and the screen would remain white. I was able to get into bootloader. Now i get no display and a green light on the ear piece is all i have.
Anyone have any clue if it's possible to fix this. I just got the phone on Friday and did Hard Spl by Sunday i was experiencing issues.
Any help or ideas would be great.
have you tried pulling the battery out for 10 minutes and letting the phone totally discharge?
i am trying that right now
still the same response. the device will not boot up
my first kaiser was dmaaged by myself. at night i wanted to reset the device. but the hole ist not like the hermes left of the usb jack its right of it so i didnt saw and didnt felt it and pushed my stick into the usb jack. at the hermes the usb jack was a board but in the kaiser the connectors are metal sticks with plasics around.
after pushin the stick into the jack the connectors were pushed down. at the next day the device had low battery cause the power adapter couldnt load the battery...
i phoned HTC and they couldn't offer any ideas aside from brining the device back.
when i plug in the device its recognized as a "data device" but i canot find drivers to enable activesync to address it. i feel like it's possible to flash it without activesync is this possible??
can't you just return it?
k_otix99 said:
i phoned HTC and they couldn't offer any ideas aside from brining the device back.
when i plug in the device its recognized as a "data device" but i canot find drivers to enable activesync to address it. i feel like it's possible to flash it without activesync is this possible??
Click to expand...
Click to collapse
Yes just download the HTC_ROM only that i just posted in the Kaiser upgrading sticky and put your phone into bootloader mode and run the Custom RUU and it should flash just fine
austinsnyc said:
Yes just download the HTC_ROM only that i just posted in the Kaiser upgrading sticky and put your phone into bootloader mode and run the Custom RUU and it should flash just fine
Click to expand...
Click to collapse
i cant tell if the device will go into bootloader. it will not light up totally black screen. I flashed the ATT rom you posted before it totally died hoping that it would reset the issue if it was software based. it didnt fix the issue though.
jallenclark said:
can't you just return it?
Click to expand...
Click to collapse
I plan on it but i hoped to be able to fix the issue myself. I have been able to fix my hermes in the past with the help of the XDA community.
hi guys,
i hope i can bring to life my breeze again. i flashed my device with the futureshock rom. all works fine but the simlock was inside the breeze. i read a lot about sim unlock but have had no success. some day a guy told me that he want to try to unlock it. he flash a hsdpl (i don't know which one) and after this the brezze don't want to boot again. no tricolor (push on/off with camera buttom). my activesync got no connection. my device manager can not indicate the breeze when i conect it with the usb cable.
do i have a chance to get runnig it again?
thanks a lot
stagger
has anybody an idea, or suggestion? or is it damaged? unfortunatelly i dont know which version of spl he has install.
thanks
Stagger467 said:
has anybody an idea, or suggestion? or is it damaged? unfortunatelly i dont know which version of spl he has install.
thanks
Click to expand...
Click to collapse
Sounds like a death battery to me...
Try charging for one hour.., Then try to turn it on..
I don't think it does mathers if your phone is locked...,
Let me know the result
it charged my battery over 2h. nothing ....i can not turn on my breeze. the first minute i got a red charging light. like everything is ok.
i got no connection with my xp pc and active sync. the device manager can not detect the breeze. so i can not install any other boot program
any other ideas?
thanks
I had the same problem, it was hardware related though.
There are two little metal contacts that ground the battery cover, well one of them slipped though a little and was shorting pins on the motherboard. So fortunately nothing blew and it just was not turned on.
So obviously there is some form of protection from shorts that it will not power on.
Anyway check if it will turn on if only the motherboard, LCD and battery is plugged, without housing or anything else. Be sure that the back of the battery does not get into contact with the MB if you are going to try.
Good luck, hope you get it fixed..
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
luisdesigns said:
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
Click to expand...
Click to collapse
Maybe if you start sharing what rom are U using My advice is that you definitely should flash another rom or reflash your stock rom to solve the issues you are experiencing. Please read the sticky of how to do it
you can reset it to factory settings (the ROM you last flashed that is) by this method:
press and hold the two upper hardware keys next to your call end and call button. While pressing and holding them do a soft reset. A white screen with blue text should come up. Press the green call button and wait for it to reach the screen after the percentage screen. Then press the green call button again and it will be like it first was out of the box (or when you flashed a ROM).
Kaiser tytn II
The soft reset that exactly what i did and that´s what screwed up my kaiser , i am going to re-flash it , i will look on how to do it and will have a try.
ok, one slight problem, i have a macbook all i find is for pc
luisdesigns said:
ok, one slight problem, i have a macbook all i find is for pc
Click to expand...
Click to collapse
You'll either have to create a partition and install windows on it or flash via sd card. Link here to get you started:
http://forum.xda-developers.com/showthread.php?t=433835
thank you so much, i will try it this evening from my pc hope it fixes the issue. Will let you know
HI everyone.
Im wuold really need some help with this problem.
My phone have had some problems with connecting with usb earlyer and its been coin flip will pc regonize it, well after instaaling some apps and making back up before that i noticed that im getting black screen and have to reboot to get my galaxy screen working back.
FInally i made factory reset but then i got really big problem, when i start galaxy it shows the galaxy text and after it that flashing S logo but after it screen goes black and thats pretty much it!
Also usb not working dont know shuold it be in that state working!?
And pressing those 3 buttons wont do anything have tried multipletimes everyday, so my phone has locked me out pretty good is there any solutions on that? Or is my phone totally ****ed up?
Hopefully you will be able to cure it with the jig method (look in dev section)
Sent from gt i9000 insanity 8.5/fugumod
What rom where you on before ?
Well phone where updated with Froyo 2.1 but nothing else. oh it were also rooted and thats about it! have been thinking about to sending phone back to the manufacturer! dont really have time trying to find some cure for it.
Rooting = no warranty so you would be best to clear it via jig just in case .
jje
rere
hi there it been longtime since i wroted here.
Well i tryed the jig method with usb cable and with single 300k resistance, made little mistake not to measure it before because there is a 5% tolerance with it so my resistance were only 294k. Doesnt work btw phone dont do anything with it, well i have to make new cable and be sure that it is the 301k resistance. will be adding new info after it what will happen. Im slightly scare that even getting that right resistance it wount do anything, it wuold be that point when i will send it to samsung and maybe get it working again.
Downloading...
okay. next problem with jig managed to get my phone to download mode!! JIIHAA
but now my computer cant regonize it!? actually this problem had before the magical black screen. Any solutions for that? have installed new usb drivers and oldones but cant find it.
PLS need more help!!
Sounds like you need to clean the cable. I've had a hell of a time with these issues in the past. When it is on again off again (or you just get 'generic device' or unkown device) then try cleaning the port on the computer with running alcholol and something tiny enough to get in there.
I did that after a huge long search on here and it was like freakin magic. 8 drivers popped up all at once!
Never hurts to do the comp and the cable too (and make sure its not a charging only micro usb...).
G