Unlocking SPV M2000 - MDA III, XDA III, PDA2k, 9090 Software Upgrading

ok ive just bought an M2000, which is currently on orange, well i think it is, its got the orange logo on the front. i want to put an orange sim card into it,however it just says the service provider is locked. ive tried unlocking it with some software but that hasnt seemed to have worked? anyone got any advice or point me in the right direction of what to do?
cheers
much appreciated

http://forum.xda-developers.com/showthread.php?t=240784
this seems to work for nearly all - it worked for my XDA2IIs just fine

yeah ive done all that the only problem is... when i go to run the program that it tells u to download onto your phone, my phone wont run it and it says the program is not a valid pc application
any one know how to fix that?

ahhh ok.. well the program didnt work but i no longer have to use a code... the phones actng a bit crappy now and wont load certain things up.. i think ive broken it. does anyone know how i can reset the phone. and reinstall the original windows mobile 2003??
cheers???

I dont think you have broken your phone but
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
(the section is called How to upgrade to the lastest ROM (currently 1.42))
but you can read more

1. Do a hard reset to bring it to the original state.
2. Unlock it
3. Upgrade your ROM to what ever version you want.
Here is how you do a hard reset.
--------------------------------
Hold down the Power button (Top Right corner) and at the same time put your Stylus pen in the hole where it says “Reset” (Lower Left corner).

Related

no respond when tap on screen XDA II

I have a XDA II here, It was work fine, but after I tap a file in the Windows folder, then my XDA softreset itself, after the XDA can still turn on, all button is functional, but just problem to tapping on screen, when tap on screen it has on repond (the screen is on).
I also tried hard reset but all data is still here, weird?? I though hard reset will let me go back to the default setting, but it doesn't change anything except the clock go back to Sept 2003.
PH10B
Radio 1.10.00
G 1337.18
D 1.60a00WWE
my problem with the screen is that it can not be alligned, everytime i try the cross goes round and round and it simply wont start. i have tried at least 6 different roms hard reset but problem remains :x :x
I NEED HEPL GRAHHHHHHHHHHH
PDA2 same problem
Hi All,
I have a PDA2 and for some reason tapping on screen stopped working, I tried hard reset too but I cant tap on the screen anymore. Kindly help. PDA is in super shape I have also upgraded it with the latest patch from clubimate but cant tap the screen.
Nothing is broken and it happened while I was typing a note. Pls Pls help
Qamar Bukhari
[email protected]
we should create a club and name it the fellows with the x-screens :x :x :x
Hey guys do something, where are the experts ??? I am sure its just software problem, I installed some software and next morning touchscreen was not working. I didnt dropt the pda.
Qbukhari.
Just a thought, try putting the device into bootloader mode then hard resetting the device.
Also try putting it into bootloader mode, updating the complete ORIGINAL rom and hard reset to complete the install.
Bootloader mode = power button + reset button + action button right ???
I have done so, problem still there
I have replaced the ROM downloaded from clubimate ----- problem still there
I have also tried to replace the XDAII rom ------ problem still there
now tell me where to get the ORIGINAL ROM ??? I am sure if the original rom is inserted it will be working again. btw pug can we talk online ? I am online now
[email protected] (msn messenger)
qbukhari.
hey all, I finally solve this problem, in the hard reset screen, there is menu for me to choose what to do in during the hard reset, like clear storage, registry... and i choose to clear all, then my XDA II is now work fine. (in the hardreset menu the backlight will not on, so it is not visible to find out the menu, also to change the setting use the botton of record, camera & volume button to control the menu.) good luck everyone!!
Thats a relief
Hi kindly tell me how to find that menu ?? I am sure I didnt damage my Alpine its just software problem let me fix it too.
Tell me how to find that menu during a hard reset plsssssssss
qbukhari.
WHERE IS THAT MENU??????????????
Menu ????
Still waiting for a reply, kindly tell me how to access "Clear Storage" function during the Hard Reset
qbukhari.
probably fake trying to make impression :?:
Too Sad
Dear Kabintos,
When you go in the setting/memory it is displayed total 122mb main memory in my PDA2 is this the same situation with you too ?
qbukharil.
The bootloader menu is not, as far as I'm aware, on the Alpine as it automatically detects network frequencies etc. Henrypak mentions XDA II not XDA IIi.
The program memory and so on in the Memory tab is only 122.04MB. Memory is quoted different to how most people think. 128000000 / 1024 / 1024 = 122.0703
The .03MB is taken up with partitioning of the memory to allow for storage etc.
Have a look at the hard drives on your computer for example, a 30GB hard drive is only 27.9GB. It's just how the manufacturers quote storage space, in thousands of bytes. Computers work them out in thousand and twenty fours of bytes.
To be honest Qamar, the more I think about your problem, the more I think it is a hardware issue, not software. If you've recently purchased the Alpine, it will still be under warranty and you should be able to take it back for an exchange. If not try opening it up and removing and reconnecting the ribbon cable for the screen from the mother board.
Obviously you've tried flashing it again, if the touchpad isn't working then you can't get past the screen alignment at the beginning of the ROM installation after a hard reset.
Out of curiosity, if the touch screen isn't working, how did you get to see the Memory status on your Alpine? None of the buttons are defaulted to settings or the start menu.
PDA2 live again
Hi All,
Well well well, here I am back in the game again. It was at the last moments when I was almost ready to send my Alpine for repairs when I got tip from a friend from uk. He sent me a tool to format storage completely.
After reseting the Alpine with reformatted storage the touch screen was back a bit misaligned though, after aligning it once its 100% fit now. How can I thank you my friend ???
Cheeeeeeeeeeeeeeeeers !!!!!!!!!!
qbukhari.
gbukhari pls send it to me m8 pls pls and ill thank you as you were thanking your firend that send it that to you :lol: also i wanted to ask you if you test really hard your machine after that in case it would do the same thing again
my email [email protected]
Can someone post a 100% tried and tested solution to the tapping problem?
TIA
Yeah...!
Can someone please post some instruction on sortingthis issuse out....
Lossing sleep over the thought of having to replace my screen.....
Cheers,
-R
Hi everyone,
I had exactly the same issue with my XDA2i about a week after I purchased it (around 3 months ago). I was happily browsing the web over wifi around a friends house when the screen locked. I had to hard-reset to get it up again but it got stuck in a loop whilst aligning the screen, it wouldn't go past this stage at all.
I phoned the online shop I bought the device from and they told me they had had lots of people reporting the same symptoms and that they had identified a faulty batch. I was sent a replacement from a new batch about 4 days thereafter. The new one has worked fine ever since.
If it is a software issue that's fixable, great, go for it. But if your device is still under warrenty I'd suggest getting a replacement - worked for me!
Sorry I can't be a bit more posistive but thought I'd let u all know.
*server duplicated post*

Rom upgrade failing/Screen Problems?

I am a Newbie so be patient with me and your advice is appreciated.
I have a Qtek 9100 (Wiza200) G3
Rom 1.1.7.5
Radio 4.0.13.16
Ext rom 1.1.7.105
I purchased the phone unlocked and have used it with sim's from other countries. When I attempt to run the following updates.
RUU_Molski.Biz_226102_22610105_022511_WWE-30MB
RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2
I get the error "file name is not a valid Pocket PC application".
What am I doing wrong?
(I have also read all the recommended threats which were great. Thanks for sharing)
you obvious did not read all the recommenced sites! My guess is that you tried to run the upgrade file in pocket pc. You must connect your phone to the computer and establish activsync connection first. than you run the upgrade file on your computer
gonzo11 said:
I am a Newbie so be patient with me and your advice is appreciated.
I have a Qtek 9100 (Wiza200) G3
Rom 1.1.7.5
Radio 4.0.13.16
Ext rom 1.1.7.105
I purchased the phone unlocked and have used it with sim's from other countries. When I attempt to run the following updates.
RUU_Molski.Biz_226102_22610105_022511_WWE-30MB
RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2
I get the error "file name is not a valid Pocket PC application".
What am I doing wrong?
(I have also read all the recommended threats which were great. Thanks for sharing)
Click to expand...
Click to collapse
Navy2010 is correct you are running the updates from your PPC this won't work. You must run the programs from a PC. I also suggest a little more reading.
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292
Make sure you have CID unlocked the device.
Kirby
Thanks Gents but one more question for u?
The upgrade went perfectly. Thanks
The reason I was trying to upgrade the ROM is not resolved still.
When device is in the Portrait position (slide is closed) my touch screen works maybe 20% of the time. When I open the slide the touch screen works perfectly. The issue still occurs after the upgrade.
Any recommendations?
gonzo11 said:
The upgrade went perfectly. Thanks
The reason I was trying to upgrade the ROM is not resolved still.
When device is in the Portrait position (slide is closed) my touch screen works maybe 20% of the time. When I open the slide the touch screen works perfectly. The issue still occurs after the upgrade.
Any recommendations?
Click to expand...
Click to collapse
Sounds like a hardware failure and could be the reason the phone was sold... ?? If you can return it under some warrantee, I'd lean that direction.
--M
I agree.
Yep I agree. I have sent an email to the seller. In all fairness He sold me a brand new device and he has been pretty good so far. Let see what he says now. I'll update the post when he gets back to me. Thanks for you comments.
Seller has sent me an RMA form
I guess he is going to repair it or replace it.
He emailed me an RMA form which I have sent back. Saga continues.
gonzo11 said:
The upgrade went perfectly. Thanks
The reason I was trying to upgrade the ROM is not resolved still.
When device is in the Portrait position (slide is closed) my touch screen works maybe 20% of the time. When I open the slide the touch screen works perfectly. The issue still occurs after the upgrade.
Any recommendations?
Click to expand...
Click to collapse
I have had this problem but in reverse it turned out to be muck under the screen and would cause the start button to activate by just pushing the side of the case.
Get a laminated buisness card or something like it and slide it in between the screen and case
You may have something here
Thanks Eddieitman. I tried it and nothing much came out, but usually after a few mins the screen locks up. This time it's still responsive after 15mins. We'll wait and see after an hour if it still works. fingers are cross.
btw nice site.
Still locking up but a little squeeze works. lol
I am talking about the device. lol Unfortunately, it's still locking up. But when I squeeze the sides of screen it comes back. Sounds like my situation maybe a little worse than yours. I going to send it back and see what they do. thks for the help.
Screen issue not covered by warrantee.
This is a Update/FYI.
I sent my phone into Arvato Teleservice out of Germany to fix the screen issue. $97.00 cdn to do so. First off their customer service is absolutely horrendous. So avoid them.
They determined the issue to be a damaged Main Board, but because of the flashed ROM they are not going to do it under warrantee. I should of downgraded before sending it in (my fault). I am still fighting with them.
Cost to fix $490.00repair + $97.00shipping = buy a new phone.
I am not suggesting it is a result of the ROM but wondering has anyone experienced screen issues after flashing the ROM?

Did i just brick my phone? Help!!!

Hi, Well i came here and found WM6 install for the BA and so i go and try and install it, i think nothing of it. Then the installer comes up saying that it cant detect my phone so i go and look at my phone and Its just a gray screen with Serial at the top and V 1.02 at the bottom. Man, i just got this phone and im hopeing i didnt screw it up already =/ this freaking sucks. Can anyone help me please
Are you using USB port to connect your phone? If you are your usb connection is not working because it will show usb on the screen rather than serial. Need to check your usb connection if you are using usb.
Well, it says that when i got it conected to the dock, But serial when its off.
If it says that then the usb connection is AOK.
Hmm... You mean you havent installed it yet?
Try "Hard Resetting" then reDo the process of Upgrading step by step... maybe you missed something.
I think that as long as your bootloader is intact. You can install your OS definitely, I think, correct me if im wrong. coz that happened to me and i revived my BA.
Well it was just an installer, I ran the .exe and it was like "Installing WM6!!" then it just cut off and did this crap. So is there annother way to install it? did i do something wrong?
Well i tried "Hold down the Power button (Top Right corner) and at the same time put your Stylus pen in the hole where it says “Reset” (Lower Left corner)." But the screen lights up and then goes blank then it pops up with the serial jazz. I hope i can get this fixed because i cant afford a new phone.
Try pressing/hold the (Record Button) + (Power Button) Then Stick the (Reset Button)...
that'll make it go into the Interface Mode(Bootloader) that's either Serial or USB... then try to flash it again.
Well, I do that and the screen does the same thing, when i hook it up to the dock it does the famose xp Bedunk sound saying it knows something is conected. How do i install the thing again if active sync cant find it?
Okay, well i went to try and install it anyways and it seemed like it worked... why do i have such bad luck?
Well now after it was complete n i did the soft reset, It has 4 big bold Color lines, and at the bottom it says
No GSM
D 5.60.00 WWE
=/ whats that mean? Im too damn young for all this technical crap man, any help, please...
Hey xXBuddahXx
It-s all good... Just reset the device pushing the pin with the stylus and everything will be fine...
Anyway, like SilverSamurai said..., if you can get into bootloader mode then you're fine...
Make sure you upgrade using the MaUpgradeUt_noID app and follow carefully the instructions step by step: http://forum.xda-developers.com/showthread.php?t=326532
My first upgrade to another 2003 firmware was a nightmare and many times I've felt my heart pumping like it was gonna burst just looking at my beloved BA not booting... And since I think I installed almost every ROM I could get my hands on.
My advice, try again cos Helmi's WM6 Pro really rocks and it's the most stable I've seen so far...
Good luck,
Brice

HTC p3600 trinity boot problem

i started having this problem a month ago. after boot the PPC writes something in red and after a few seconds gets black
i recorded it so it would be clearer
http://il.youtube.com/watch?v=NAHqAZS2nZ4
i tried installing a few roms and even the original one from htc website
i would appreciate any help you can give me
Very strange. What SPL version doyou have? Have you used cooked roms? Anything else happend to the phone?
HTC trinity original ROM
Here is the original HTC Trinity ROM:
http://rapidshare.com/files/202845245/Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.zip
1. Press on/off button + camera button + reset (using the stylus)
2. You should now be in tricolor screen.
3. Connect the usb cable.
4. Make sure you have activesync runing.
5. Install the rom provided in the link.
In the link you will find rom+radio. (Radio version 1.20)
Here is a newer radio version 1.56:
Hey! My trinity have the same problem!!!
I habe all test: Without sim, without SD, with SD, with SIM (with SIM screen is grey)
What have you done?
Original ROM - same problem
Mine was doing this earlier
seemed that their was dirt stuck in the reset button hole causing it to stick in slightly
I got this problem too. My trinity would turn on and start to fade away. But mine was a liltle more artistic. Many times i saw a kinda round spot in the middle of the screen that become black, then half of the screen would black out and then the rest of the screen. Sometimes i even got colors.
I noticed if a had a fully charged battery the phone would work perfectly.
But most of the time it turn on, but the screen stayed black with the retro light on.
I was told to try the unbrick exploit.
me too !!! i have the same problem with my htc 3600 ? can someone help us to fix our htc's 3600 ?thanks in advance....
have you fix it ?
hi all
I have a small problem with my htc p3600. It's not starting. It's loading only the bios but it's freezing with the screen picture and is not loading the WM 5.0 I try to change the WM5.0 with a new one but I don't have a active sync. connection.Please help
has anyone found a solution to this problem ?
anyone have a solution?
Finally, what you should do?
Since the Trinity / P3600 is getting old now, I believe more and more people are going to face this strange problem sooner or later.
So I thought I should save your time and tell you what you should do when your trinity starts behaving like what was described at the beginning of this thread.
YOU SHOULD DO NOTHING !!
THERE IS NO QUICK FIX
THERE IS NO WORKAROUND
THERE IS NO CHEAP SOLUTION
I have searched and tried everything mentioned in this forum that might slightly be related to the problem and all solutions failed.
So after days and days of experimenting, I gave up and sent my device to HTC dealer who called me few days later to tell me that the mother board needs to be replaced.
The dealer told me the cost will be around $213, but they said they are going to sent it back as it is, because they don't have that board model anymore!!.
Even if they had, for an old device like this , I don't think it worth that mush money to fix.
**************************************************************************
*SO BASICALLY , DON'T WASTE YOUR TIME TRYING TO FIX IT AND BUY YOURSELF A NEW ONE. *
**************************************************************************
.
.
.
.
Hello,
I resolve the problem with this : Simultnous press Power and Camera buttons and softreset, you'll got bootloader, three colors mode. Perhaps a little error message like this WLAN error but if you plug usb, it's ok.
Hope this good for you (excuse my poor english)
I've had this same problem for about a year now and keep coming back to it.
Any forward momentum on solving the problem would be appreciated as I quite like this phone.
1. The phone will boot FINE without a SIM
2. It hangs like in the video (or other strange screens) as soon as I insert a SIM card (partially or fully)
3. I've tried 3 different SIM cards
4. I have no SD cards
5. I have installed 3.20.Olipro
6. An official ROM is re-installed
I must admit the phone has had a hard life (or is it just the cheap plastic coatings HTC use)
No sooner did I post this did I find a solution.
For anyone that is interested...I have managed to re-install the original HTC ROM but HAVE NOT managed to install a workable 6.5 ROM yet.
So, the answer I found was:
1. Put P3600i into bootloader mode (push camera+power+reset buttons for 2 secs and get triple colour screen)
2. Re-flash HardSPL 1.1 from my PC
3. Re-flash original HTC ROM (WWE_3.00.707.18_6275_1.46.30.11_108) by agian putting P3600i into bootloader mode first
I since tried several different radio stacks but haven't noticed any difference in reception so have left the original stack on (1.46.30.11) as it gives the best phone call quality
I love the UI of the latest WM6.5 but if the P3600i doesn't run them properly I'll just have to do without.
Good luck with your own unbricking.
it was working fine for me when i put a little piece of rubber between the processor and the metallic cover of it but after 3 months i have the same problem and the paper dont work anymore.... now when i press the power button the screen is black, only the backlight is working anyone have any ideas what to do?
OMG WTF, as soon as I saw this thread I switched my HTC P3600 on and it started doing it I reckon this is cursed, I will upload a video onto Youtube later and show you that is what happened.
I had this problem myself, didnt know what i was doing wrong, altho my tri color screen did this, not the boot one.
I removed memorycard and voila, everything went smoothly.
edited
sorry 4 my mistake

Urgent Help Needed

Hi all,
My topaz/diamond2 has just messed up in that the screen has gone strange. I will post pictures but basically the bottom half seems to have gone and you can see dots of the digitzer.
No picture is messed up and you can see the image perfectly fine so it seems like the digitizer is at fault.
I have noticed recently I have had an oily look to it around that area but dismissed it as my Diamond 1 got this eventually too however, it seems I should have paid more attention to it!
As a result, I cannot access my phone and am stuck on teh slide to unlock screen from the Windows 6.5 Tom provided.
I am not too worried about the hardware as it is well within the warranty however...
I urgently need to back the phone up. Unfortuntly, I cannot get any further on the phone and when I plug it in, while the system detects it, it detects it as a removable device and not the sync side of it.
All I need is to backup the basics into Outlook
Anyone know of a way around this? I don't know whether tools such as the mtty and so on can help get around this or not or some other tool that can force a backup?
I almost need control of the phone via windows but again, I can't install anything as I won't be able to hit any of the agreement yes/no buttons.
I appreciate any help you guys can give me on this!
Thanks
Try to connect to PC, then right click on Activesync, choose synchronize.
Welcome to the club of broken topaz screens...
And here I thought my phones were indestructable.
Unfortuntly, Activesync/windows mobile won't detect it as I set it to automatically be a removable device on the unit itself.
Panic over for the time being...found lots of threads on here about the screen and one of them had a clever suggestion about using selotape on it
Sure enough, the blob went away instantly so I'm back in the phone now.
Wish I took a picture now as I already emailed the company about warranty
If anyone has this problem AND you can ActiveSync but you still need to do more than just a basic backup, try out My Mobiler. Controls your mobile from a window on the desktop. Great for taking screenshots of issues, or just to show off. Also comes in handy when entering alot of contact information in or for sending long sms' to people.
I think the site is down at the moment but you should be able to download it from somewhere other than the official site if you do a bit of googling.
I've had no trouble using it on udK's wm6.5 R1, tESS 2.0 / 2.1, the latest energy rom, shadowlines test rom, and Tom Topaz 2.08

Categories

Resources