gprs using data when trying to connect... - Tilt, TyTN II, MDA Vario III General

i was in an area with no gprs today and my kaiser was constantly trying to connect, this went on unnoticed and when i looked at my gprs tracker is racked up 38mb in one hour, thank god i have a 1gb data plan. what's going on here why does it use data to connect? and is there any way to stop it from trying to repeadily connect like that? when i try to turn off the gprs connection with comm manager or gprs manager, windows will automatically try to reconnect over and over and over again.

Any chance you have ActiveSync running in the background when you check? I'm abroad at the moment and have the same problem, this is my no.1 culprit at the moment.

nope i have nothing running in the background. i don't understand how it's using data when it's not connected. i can't figure this out, i don;t even know where to begin.

sorry double post

I have the same issue! I have no data plan and my GPRS was connected for some 39 minutes the other day!!!
Anyone any ideas? Not sure if it's the MMS messaging that is causing it...?!?

figured it out, i just left the password section blank in the connection setting that was it always promts me to enter the password everytime the phone tries to reconnect

Related

Kaiser still closes my data connection

Hello,
i use the Exchange Email Push and now i have changed my germen mobile provider. My new provider counts the data traffic in 100kb packages.
I've noticed, that the data connection went off after some minutes of inactivity. Because i use the direct push, the data connection suddenly reconnects.
So i have about 1 MB data traffic each hour, even when there is no mail.
Is there a possibility to hold the connection open?
The Kaiser tweak Option "Always On" does not work for me.
Is there a program which sends out a ping every x minutes so that the connection will stay open?
With my old provider, i had no disconnect.
Thank you
Special2k3
I had a similar problem after using the KaiserTweak's "auto disconnect" option (I don't remember the exact name of the option).
It disconnected after the specified period of time even if the connection was in use. After I reverted it, the problem was gone.
jahnotto said:
I had a similar problem after using the KaiserTweak's "auto disconnect" option (I don't remember the exact name of the option).
It disconnected after the specified period of time even if the connection was in use. After I reverted it, the problem was gone.
Click to expand...
Click to collapse
I have configured the Option "Disconnect After" to "Disable (Default)" but the Problem still occurs.
Special2k3
That's how Push email works, always checking. You can always turn off Push email and set the messaging program to check for email every x minutes.
You understand me wrong. I want the push programm to check always for new mails. But i don't want the internet connection closing every x minutes.
I need a permanent connection.
Special2k3

GPRS connection drop out

Hello,
i have the HTC herald.
But i need some help here, please.
I´ve put the messaging program to make a gprs connection to download emails automatically, say 30mins.
The machine makes everything except, dropping out the connection after checking emaild or whatever. How can i do this? to shutoff after receiving emails or something else? like for another example: my weather program makes updates every hour, and the gprs connection stays on. how can i stop the connection automatically ?
thanks a lot
Nuno
Please, can anyone help me on this?
thanks a lot

Turn of data connection

I want to turn of data connection completly...how?
I already tried to turn it off at setting in touchflo, but as soon as i started msn or a other internet application, it automaticly made the data connection again.
I would like to turn it off completly, but i still want to make calls and receive sms. I'm going to a other country tommorow, and you know how expensive it is to browse the internet there.
there's an app called nodata wich does what it says. you'll probably find it after a quick search

Unable to turn off Tilt data connections

I am unable to turn off current data connections on my Tilt. I'm using MoDaCo's "No Data". So I decided to try shutting off data connections with KaiserTweak. I'd set the Data connections to disabled but data still comes thru. When I try to shut if off with NoData I get this message "Connection disabled. You will need to manually duscinnect if a GPRS connection is currently active". Anyone know whats goin on here?
Anyone? Anyone? Bueller?
You could always go into settings ---->connections----->connections----->manage connections and delete anything there..... it cant connect if it doesnt know what to connect to................
I'm not looking to completely delete it. I just want to be able to disable it when I'm around WiFi.
FuSchnickens said:
I am unable to turn off current data connections on my Tilt. I'm using MoDaCo's "No Data". So I decided to try shutting off data connections with KaiserTweak. I'd set the Data connections to disabled but data still comes thru. When I try to shut if off with NoData I get this message "Connection disabled. You will need to manually duscinnect if a GPRS connection is currently active". Anyone know whats goin on here?
Click to expand...
Click to collapse
correct me if I'm wrong, NoData is only to disable data connections before it connects.
so if U already have a data connection (not WIFI) active, U need to disconnect the data connection first.
After that, your tytn will not be able to turn on the data connection unless U "enable" the settings in NoData.
hope it helps.
oriki said:
correct me if I'm wrong, NoData is only to disable data connections before it connects.
so if U already have a data connection (not WIFI) active, U need to disconnect the data connection first.
After that, your tytn will not be able to turn on the data connection unless U "enable" the settings in NoData.
hope it helps.
Click to expand...
Click to collapse
I'm not familiar enough about NoData to know if it only disables a data connection before connecting or not. Sometimes when I connect I get the pop up window saying I'm connecting. Other times I don't. There's usually a big "3G" up at the top of the phone and when I connect I gt a little "3G window.
FuSchnickens said:
Anyone? Anyone? Bueller?
Click to expand...
Click to collapse
Noob here but....I used Kaisertweaks and it blocks GRPS for me.
torp74
When I try to do it thru KaiserTweaks I set it to Disable. When u disable yours does it say enabled or disabled when in Kaisertweaks? Does anyone at all know what going on here?
FuSchnickens said:
When I try to do it thru KaiserTweaks I set it to Disable. When u disable yours does it say enabled or disabled when in Kaisertweaks? Does anyone at all know what going on here?
Click to expand...
Click to collapse
Mine says disabled. I pretty much set everything under "data" to disable. I'm in a wifi paradise so screw att.
torp74
In connections I set it under one without any settings. Its been working for me so far. When I DO want to connect I just switch it back to medianet. Everything else works as normal.
Even when I change it to disabled it continues to say enabled under settings? I've even tried to reinstall Kaisertweaks but still get the same results. Has anyone else come across this problem? This is getting frustrating.

Serious Wifi issue on Kaiser...need fix ASAP!

I'm really astonished that this is happening...and I can't figure out why. My neighbors just got a wireless router hooked up, and i get about 1 bars worth of signal at my house. It is an unsecured connection and my Kaiser keeps connecting to it whenever I turn on Wifi. It will no longer connect to my wifi network no matter what I do. I click on my network in wifi settings and hit 'connect' and then it connects to my neighbors again...I delete it, start over...and no matter what I do it always connects to it. It's obviously some sort of glitch...any ideas on how to fix without a hard reset which is what I'm about to do because it is so frustrating. Everything I use is wireless, and nothing else was affected...just my Kaiser. Anyone had this happen to them before?
JVogler said:
I'm really astonished that this is happening...and I can't figure out why. My neighbors just got a wireless router hooked up, and i get about 1 bars worth of signal at my house. It is an unsecured connection and my Kaiser keeps connecting to it whenever I turn on Wifi. It will no longer connect to my wifi network no matter what I do. I click on my network in wifi settings and hit 'connect' and then it connects to my neighbors again...I delete it, start over...and no matter what I do it always connects to it. It's obviously some sort of glitch...any ideas on how to fix without a hard reset which is what I'm about to do because it is so frustrating. Everything I use is wireless, and nothing else was affected...just my Kaiser. Anyone had this happen to them before?
Click to expand...
Click to collapse
get your own internet connection and stop stealing signal from your neighbors!.
On another note, try to set your connection instead of best battery try best performance settings>wifi>advanced>power(sorry dude, if these are not the correct names, but I'm on my touch 2 phone with WM 6.5 spanish rom ..)
I'm on stock AT&T Tilt Rom WM6.1 I've tried all settings available through the Windows UI. So it must be somewhere in the registry that I need to change. I can delete all networks and scan for new ones...two come up...mine, and the new (neighbors)...I've been connecting to mine automatically for years now....and even if I click connect on my network...after its all said and done with the logging in...it connects to the wrong one still...grrrrr

Categories

Resources