Database Develop

T-Mobile Wings WIFI Problum

my T-Wings give me WIFI problums coz i always Conact WIFI network on my work place but mostly time wifi show its conncted but not working .. but after reset some time its work or some time not
some1 know whtz wrong ?

maliks said:
my T-Wings give me WIFI problums coz i always Conact WIFI network on my work place but mostly time wifi show its conncted but not working .. but after reset some time its work or some time not
some1 know whtz wrong ?
Click to expand...
Click to collapse
have you tried accessing any other wifi connection outside of your workplace ? does it give you the same problem ?

Wifi problums
yes but i didnt face problum other places but on work place its working befor fine

problem with T MOBLE WING
I have the same problem , I even did try connect to my home Wifi it show connected ,but doesn't open to the website I want to ,can some one help,thanks

I had the same problem, I installed batterystatus, and checked the option to disable gprs when wlan is on, and now it works fine...
You don't need batterystatus to do this (the software just does it automatically for you), you can do it by yourself by disabling "data connection" in the connection manager whenever you turn on the wifi radio
-Hope it helps

t-mobile wing wifi problems
I had a similar problem with my wing. It would connect to unsecured WIFI networks and work flawlessly but when I connect to a secured network it would work for about 1 min then just hang while downloading a web page. If you device is doing this send it back to t-mobile and get a new one. This is what I had to do. hopefully you have a warranty.

I just got my T-Mobile Wing and I think I have the same problem. It just doesn't want to work with my WPA-secured Wi-Fi. When I switch WPA off, it works fine.
Did anyone else had a problem like this?
Called T-Mobile, they have nothing like that in their knowledge base.

I got this problem when i installed HTC 10 Button comm manager. I uninstalled it and WiFi works again.
Hope this helps

i have somewht of a similar problem, since ive had my Wing i have been unable to use my wi-fi, when i turn it on it says connected and shows me the lil meter and everythin but when i try browsing or downloadin it just hangs and does nothing until i turn the wi-fi off...i have no clue why i have learned to live without it but would appreciate any help...thanks

Try this it work for me. Whenever you want to connect to secure wpa do this before you make the connection
Start > Setting > Connections > Wifi Status > Power Mode > Move the slide "Best Performance"
Your wing should be able to connect to secure wpa.
Hope this help.

timace said:
i have somewht of a similar problem, since ive had my Wing i have been unable to use my wi-fi, when i turn it on it says connected and shows me the lil meter and everythin but when i try browsing or downloadin it just hangs and does nothing until i turn the wi-fi off...i have no clue why i have learned to live without it but would appreciate any help...thanks
Click to expand...
Click to collapse
Make sure you disconnect from edge/gprs before you try to surf after you are connected to the wifi.

ivanmmj said:
Make sure you disconnect from edge/gprs before you try to surf after you are connected to the wifi.
Click to expand...
Click to collapse
how exactly do i do this? is it what was explained about in the battery status menu and check marking the box 'disable proxy for wi-fi'...?

You can click on the little E or G on top and click on Disconnect.

ivanmmj said:
You can click on the little E or G on top and click on Disconnect.
Click to expand...
Click to collapse
i dont know how i ever survived without wi-fi....WOW....thank u

Thank Ayodeji13. He answered this in the 5th post. ^_^ But, yea, I've done the same thing before and was lucky to realize where the problem was coming from. Unfortunately, it didn't help me with the crappy wifi signal that my Wizard provided me. The wing, on the other hand, is MUCH better at this.

joking said:
Try this it work for me. Whenever you want to connect to secure wpa do this before you make the connection
Start > Setting > Connections > Wifi Status > Power Mode > Move the slide "Best Performance"
Your wing should be able to connect to secure wpa.
Hope this help.
Click to expand...
Click to collapse
Thanks mate... I too was having issues connecting to wifi... its kind of strange... it was connecting to my home network for sometime but later it suddenly stopped. It will connect to other networks but not to my secured network. Today I tried the setting you mentioned and surprisingly my phone connected to my home network... I wonder why because this setting should improve the performance and not the connectivity itself... Thanks again

you can add me to the list of people with wifi issues. I can't connect to my wireless router and I'm stand two feet away from it. It shows up but when I try to connect it says unavailable. I've done everything from turning the data off, to setting the power to best performance but it won't connect.

I need help... Whenever I connect it says I'm connected but actually I'm not. Yesterday I could view directions using live search but couldnt browse the web, not i cant do both. it gets stuck on the locating... part of loading the website. sometimes it gets to opening but the KB bar doesnt come up and it gives me some 500 internal error, or page doesn't exist. I cant do the best performance thing because im using touch it 2.3 rom and i dont have wifi status anymore.
WHY DO YOU HAVE TO REMOVE THAT STUF?!! URGH! I dont even have msn!
But anyways, can someone help me connect to the internet?...

TRY THIS
I have the same problem, i i manage to fix my wifi connectivity by editing the registry.....try this at your own risk.....but swear it works for me. i used total commander to edit registry and go to:
HKEY_LOCAL_MACHINE > SOFTWARE > HTC > Comm Manager >
then you will see folders 0 - 8 or some only have 0 - 7 ,delete folders 6 and up ........ ( I JUST MOVE MINE instead of DELETING IT< I MOVE IT TO STORAGE CARD SO IF SOMETHIN GOFF UP I CAN JUST PUT IT BACK )....
SOFT RESET then try turn your wifi ON , connect to your network.... til me if this works for u guys...
i think the value of those folders are bum hehehehe thats why it wont connect......., after connecting to your wifi secured or not , it will create another folder and add those folders back by default...but this time the good settings lolz its worth a try !

Ok this is realy frustrating. My wing was getting on my secured home network and npw it dose not. I read all the post and have tried some (the ones that I could understand). I dont have the option under battery status to disable gspr or gpsr. And my system is vista 64 so total commder dosen seem to work for reg settings(edits). I can conect to unsecure networks but I cant to my hone (secure) network. I have in the past but it dsent ssem to work now?

gprs using data when trying to connect...

i was in an area with no gprs today and my kaiser was constantly trying to connect, this went on unnoticed and when i looked at my gprs tracker is racked up 38mb in one hour, thank god i have a 1gb data plan. what's going on here why does it use data to connect? and is there any way to stop it from trying to repeadily connect like that? when i try to turn off the gprs connection with comm manager or gprs manager, windows will automatically try to reconnect over and over and over again.

Any chance you have ActiveSync running in the background when you check? I'm abroad at the moment and have the same problem, this is my no.1 culprit at the moment.

nope i have nothing running in the background. i don't understand how it's using data when it's not connected. i can't figure this out, i don;t even know where to begin.

sorry double post

I have the same issue! I have no data plan and my GPRS was connected for some 39 minutes the other day!!!
Anyone any ideas? Not sure if it's the MMS messaging that is causing it...?!?

figured it out, i just left the password section blank in the connection setting that was it always promts me to enter the password everytime the phone tries to reconnect

Unable to start data connection!

For some strange reason Kaisertweak continues to 'reset' itself to disable my data connection.
I have made a simple video that shows I am on E connection only, 3G is off, as well as Data Connection.
I launch Kaisertweak to enable the Data (GPRS/EGDE/HSDPA/WIFI) tab. As a good measure I verify that the others are enabled as well.
The following screen shows one of the errors I am receiving - stating This programs requires a data connection, and will retry automatically. In the mean time, please check your signal strenght. (Error: wininetHttpError [0 12150]0)
As you can see on the ssame screen I am at full signal strength.
I have enable my data connection through Kaisertweak and reconnect to google maps to use a random search in order to start the data connection.
Searching....
Searching....
Searching....
Again - This programs requires a data connection, and will retry automatically. In the mean time, please check your signal strenght. (Error: wininetHttpError [0 12150]0)
I launch Kaisertweak again and my Data (GPRS/EGDE/HSDPA/WIFI) 'tab' is back to disable. I reenable the connection by using the pulldown.
Exit Kaisertweak and do a random search using google maps.
Searching....
Searching....
Searching....
Same error as above.
I launch the comm manager and enable 3G.
Once 3G is enabled I try to complete the random search though google maps.
Searching....
Searching....
Searching....
You will note that 3G does not connect during this search. As soon as it erros out with the same error as listed it connects to H.
I retry the search...
Searching....
Searching....
I check connectivity and although connected to H I see no active data sessions.
Searching....
This programs requires a data connection, and will retry automatically. In the mean time, please check your signal strenght. (Error: wininetHttpError [0 12150]0)
I did relaunch Kaisertweak again and my Data (GPRS/EGDE/HSDPA/WIFI) 'tab' is back to disable.
any ideas?
I need my data!! haha!! Please see attached!
You may need to pause the video at some parts to see what happens since the screens flash pretty fast at some parts.
YOUTUBE VID

Silly question, but does a soft reset not fix....?
Do you get the same issue if you try to launch IE?

brandall said:
Silly question, but does a soft reset not fix....?
Do you get the same issue if you try to launch IE?
Click to expand...
Click to collapse
I did do a soft reset and I was able to use my data connection for one use. Meaning after the 30seconds on nonuse it would automatically turn off as per settings in Kaisertweak.
Then I was back to the same issue as listed above.
Again soft reset, I am able to use my data connection via IE and other apps that require data, however, after the 30 seconds of nonuse the same issue occurs as listed above.
Initially I thought it was something wrong with the build. So I did reflash the phone, I did download and use a newer version of Kaisertweak.

Remove post sorry read wrong....

This is a strange one my friend. Try the ATT settings cab just for Shnitz and giggles. Also, how about you try manually disconnecting the data before Tweak has a chance, are you able to reconnect after that?

after some trial and error -
I deleted kaisertweak and associated files. Soft reset the phone. My phone is back to normal. I am able to use my data. I can manually disconnect from H and then launch IE and my data connection starts up fine. I am still unsure why Kaisertweak would default to DISABLED for data although I set it to ENABLE. I am just glad to have my data connection back without having to soft reset when I wanted to use it.
To those that have replied... thanks for your feedback.

usachftp said:
after some trial and error -
I deleted kaisertweak and associated files. Soft reset the phone. My phone is back to normal. I am able to use my data. I can manually disconnect from H and then launch IE and my data connection starts up fine. I am still unsure why Kaisertweak would default to DISABLED for data although I set it to ENABLE. I am just glad to have my data connection back without having to soft reset when I wanted to use it.
To those that have replied... thanks for your feedback.
Click to expand...
Click to collapse
The screen shot you displayed was for the fast sleep settings
Your data settings should look as displayed below
Sounds as if you had the "Disconnect After" set to 30 seconds

Guaranteed data cut off?

Hey all am about to go off roaming with T-Mobile. I know it says the data plan only works in the UK but I'm sure they'll be happy to hit me with the bill if this is not the case.
Is there a way I can 100% stop any data comms from happening?

http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/

WasStoNed said:
Hey all am about to go off roaming with T-Mobile. I know it says the data plan only works in the UK but I'm sure they'll be happy to hit me with the bill if this is not the case.
Is there a way I can 100% stop any data comms from happening?
Click to expand...
Click to collapse
I just make a dummy data profile with no acess point names or anything and just switch between that and my real one depending on weather i want my diamond to connect to the internet or not lol

No Data doesn't seem to work for me (unless I'm missing something)
I'll try the Dummy connection

Tried blank connection too, no joy unless I need a restart?

Sorry, must've been being dumb before. I installed Advance Comm manager so I could turn off 3G and now it seems to work but I'm not sure if I needed the latter
Cheers anyway

NoData works like a charm for me..
Just install it, run it, and toggle the three different data types.

Disabling Data?

Hi
i just bought the diamond 2 and i was wondering can you disable incoming data, as i dont want to get a data plan from my service provider, and just use wifi......is there a way i can do it or do i have just have to call my service provider to disable it?
Thanks

extracrunchie said:
Hi
i just bought the diamond 2 and i was wondering can you disable incoming data, as i dont want to get a data plan from my service provider, and just use wifi......is there a way i can do it or do i have just have to call my service provider to disable it?
Thanks
Click to expand...
Click to collapse
Goto Settings > Communication and turn off Data Connection.

Also, NoData.
Does what it says on the tin.

Why use NoData when one can simply turn off Data Connection from the Settings? Is there any other benefit?

jcan said:
Why use NoData when one can simply turn off Data Connection from the Settings? Is there any other benefit?
Click to expand...
Click to collapse
Its my understanding the turning off the Data Connection from the Settings only turns it off once, it can reconnect itself if some program (email, internet) demands it, NoData disables the connection and it can only be re-enabled by changing it in NoData.
I think I'm correct ?

I dunno about NoData since I personally want to have Data, but I can confirm that disabling the data through the settings doesn't work as you would expect. It's true, the data will be reenabled if the email or web client request it.

You can also just delete the data connection. I just went to connections and removed the settings for at&t media net and now I no longer connect to edge.

Bump
Is there a definitive answer to this question? Specifically, I want MMS enabled, GPRS / 3G / HSPDA disabled (So it won't enable if I load Opera etc without having wireless connectivity).
Actually, I'd prefer to be given the option each time a new data connection is to be established, but I'd settle for no mobile data and remove the option when I wanted to use it.
No included data means that *any* accidental mobile access is expensive!