Short question, maybe someone knows. If I want to add a new Server in MMS Configuration the [New] button is not responding.
How can I re-activate this button.
anyone, help would be appreciated.
Well... this button should be active at all times... So your best bet would be to reflash your device... Sorry man...
_Nomad_ said:
Well... this button should be active at all times... So your best bet would be to reflash your device... Sorry man...
Click to expand...
Click to collapse
Yes I guessed that one, therefore I was hoping to get some "other" advises before I hard-reset and notice the same.
I would search for a cab named "Set_up_MMS_folder" in before going back that far. You already have a folder, but reinstall could help fix whatever you are missing.
Good luck.
I hope that works for you... Please give us a shout if it does, but as far as I know the MMS configuration isn't dependent on whether or not you have an MMS foldor or not. Or for that matter an MMS capable phone... It sounds to me that something messed up flashing the ROM... Witch leads to the next question, did the MMS function work at some time after flashing? Did you install any third party software after that?
_Nomad_ said:
I hope that works for you... Please give us a shout if it does, but as far as I know the MMS configuration isn't dependent on whether or not you have an MMS foldor or not. Or for that matter an MMS capable phone... It sounds to me that something messed up flashing the ROM... Witch leads to the next question, did the MMS function work at some time after flashing? Did you install any third party software after that?
Click to expand...
Click to collapse
No it didn't work, I was re-installing my phone. I installed my normal things, as always, like spb today etc. This time I flashed the std T-mob ROM because I was a little tired of all the small problems I had with the home-cooked and now this...........
The mms folder and everything I have, it's only the stupid button which doesn't work.....
........It's there, but even he color shows it's not active.
Im seriously starting to believe the so called gurus in here arent exactly up to snuff ....so to speak. your problem is simple... you have to browse to regedit..somehow(!! can you figure that out?)
oh, just got it:Total commander, tap the two dots in far right (..)
tap the root (\\)
tap registry/hklm/software/arcsoft/...MMSUA/CONFIG/UI/
DRUMROLLLLLLLLLLLLLLLLLLLLLL... now YOU figure out which setting to enable!
nah, it should be EnableServerEdit ...i think, change the value to '1'
voila
THIS DOES NOT MEAN MY MMS IS WORKING...... I HAVE A PERSISTENT PROBLEM BEING UNABLE TO SEND MMS & everyone is CLUELESS!!
aaaaarghhhhhhhhhhhhhhhhh I WANT TO DIE!!!!!!!!! lol
ifull, thanks for the advise, this did the trick. Thanks again, I'm not into registry editing.
I think my problem, as you said, was so simple that the experts thought I would figure this out by myself, LOL.
Thanks again, if I can help you in someway, please PM.
What are the right mms settings
What are the right mms settings, I did the change in the registry as listed above to allow new settings and to see what the current settings are... but can someone look to see what are the correct settings witht the oem rom for the server address..
settings
here are the settings that should be there according to tmo website - http://support.t-mobile.com/knowbase/root/public/tm21387.htm
on mine those are right but what I think the problem is this, when mms is sending it keeps getting interupted by gprs trying to connect. is there a reg hack to let mms send without being disconnected????
I believe in regedit there are some errorlog.txt files that show you the WHOLE transcription of your attempted outbound messages. If I find mine, I will post it as it shows where the delivery went wrong.
so are you trying to say your 'mms fix' of a day or so ago is not quite "fixed" or what?
re:
this whole mms thing is starting to make me feel like its a tmo network issue and not the device, just never know...but I did flash my rom to X's 2.26 w/ 2.47 radio
mms fix i think
once u hak the reg and change the setting as listed earlier to allow settings edit... click on tmobile mms settings and it should show the settings that were downloaded from tmo...but u want to change the option that says connect via mms --) to connect via data..
I just did that and it sent right away...
it works, click on the tmobile mms server and then change the connection to via data instead of mms... I just sent a message to my self and it sent it out my outbox in less than 30sec for a 75k file
robpet2 said:
What are the right mms settings, I did the change in the registry as listed above to allow new settings and to see what the current settings are... but can someone look to see what are the correct settings witht the oem rom for the server address..
Click to expand...
Click to collapse
I think the settings are operator dependend
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
robpet, these fixes just get nearer and nearer the ultimate FIX. Still cant send., it only makes a better attempt at sending now(I can see it connecting), but theres a setting SOMEwhere still preventing transmission.
the error logs are in
mydocuments/uacontents/mmslog
perhaps we can compare logs, mine now say
WRONG!!!! no mms date
WRONG!!!! no from address
and I think thats my problem, but dont know where to set it.
thanks
ifull said:
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
Click to expand...
Click to collapse
Yes thanks again, I had to do some regedit fixes, like I deleted the whole tree below what you mentioned. Now I'm able even to set as default.
I renamed the thread, because I know a lot of people have problems with MMS.
error log
ifull said:
hey vilem, youre welcome on the regedit server setting.. i was laughing at the time I read your reply, as I knew all too well the relief you felt!
robpet, these fixes just get nearer and nearer the ultimate FIX. Still cant send., it only makes a better attempt at sending now(I can see it connecting), but theres a setting SOMEwhere still preventing transmission.
the error logs are in
mydocuments/uacontents/mmslog
perhaps we can compare logs, mine now say
WRONG!!!! no mms date
WRONG!!!! no from address
and I think thats my problem, but dont know where to set it.
thanks
Click to expand...
Click to collapse
yep I got error log msgs but it still send the pics
Thanks!!
More proof how valuable the information shared here can be.
I hadn't noticed untill today. I'm running Arcsoft MMS Composer 4.2.8.1 and I can't send an MMS message... it keep just saying "Error syncronizing" I found several different settings on google and none of them worked. Is there something else I'm needing to do to use MMS on the ATT service. I live california in case that matters as far as servers is concerned.
Is this a common problem or is it just my quazi-n00b status...
Imsaffor said:
I hadn't noticed untill today. I'm running Arcsoft MMS Composer 4.2.8.1 and I can't send an MMS message... it keep just saying "Error syncronizing" I found several different settings on google and none of them worked. Is there something else I'm needing to do to use MMS on the ATT service. I live california in case that matters as far as servers is concerned.
Is this a common problem or is it just my quazi-n00b status...
Click to expand...
Click to collapse
If you go here:
http://www.wireless.att.com/support/tutorials.do?subscriberType=cing&deviceId=9990
You can get all the settings instructions for the device. Just click through what you're looking for on the left hand side. It has all the tutorials you should need. It has the MMS settings and whatnot, too.
I'm havinf this problem as well. All my settings are as displayed on the At&t support page, so I'm at a loss as to what could be going on. very frustrating.
Tilt running Dutty's v3 final rom.
one of the settings says to limit it to 600. i can only limit it to 300. and I also have the added option of choosing wap 2.0 or wap 1.2... I tried the settings as best I could on that site and it didn't work. I'm currently using See No Evil Latest ROM with arcsoft MMS Composer 4.2.8.1... Its still giving me "error syncronizing"
Imsaffor said:
Is this a common problem or is it just my quazi-n00b status...
Click to expand...
Click to collapse
yes and yes.
But, isnt this cute! Several noobs and nobody bothers searching. I replied to ANOTHER "same" thread not to long ago. So I know for a fact the answer is out there. You just have to remember that we are not your mom and we will not just GIVE you what you request....
SEARCH!!!!!!!!!!!!!!!!!!!!!!
and some searching turns up absolutely nothing related. in fact. the search terms mms not working mms att and mms at&t turned up nothing. other searches gave too broad a spectrum.
Beyond that. a response doesn't take any more than a minute to type, and is often times much more appreciated than begging me to search when the answer has been buried. Also is generally a bit nicer of a thing. and with your response, you could have easilly had enough time to post some help that may have been useful, rather than taking the time to write a long response about something we *may* have already done.
EDIT: Redundancy
Imsaffor said:
and some searching turns up absolutely nothing related. in fact. the search terms mms not working mms att and mms at&t turned up nothing. other searches gave too broad a spectrum.
Beyond that. a response doesn't take any more than a minute to type, and is often times much more appreciated than begging me to search when the answer has been buried. Also is generally a bit nicer of a thing. and with your response, you could have easilly had enough time to post some help that may have been useful, rather than taking the time to write a long response about something we *may* have already done.
EDIT: Redundancy
Click to expand...
Click to collapse
Use Google's advanced search option.
grizzley said:
But, isnt this cute! Several noobs and nobody bothers searching. I replied to ANOTHER "same" thread not to long ago. So I know for a fact the answer is out there. You just have to remember that we are not your mom and we will not just GIVE you what you request....
SEARCH!!!!!!!!!!!!!!!!!!!!!!
I used a search, and found nothing that fixed the problem, which is why i asked again. If it wasnt the correct search, whoops. I understand you desire to not waste topic space, , but really, If you already know, which it seems to me you do, or at least have an idea of where to point a person, then why not help? What you are doing is the equivalent of telling a person to buy a map and a compass when you know the point they are looking for is around the corner on the left hand side. You wasted more effort thinking out that oh-so-clever OMFGBBQPWN response than was necessary.
But anyways, I'll just mosey around that corner now. That said, thanks for the inf-, oh wait.. never mind.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
no bashing each other plz
Ok, this is what you do. From the stock MMS that is part of the tilt, you fill in the blanks for the extra open MMS settings. There will already be a ATT MMS that is set to default but the other one will have no fields filled in when you go into its settings. Add all the MMS settings and save. Now install the hacked MMS which needs to be installed if you are using the palm threaded. This is done because the stock text messaging is tied into the MMS. When you install the threaded, it will take out the original SMS and the MMS along with it. When you install the enable MMS which is now the 2nd and final CAB thats needs to be installed, it will carry over the edited MMS settings from the additional that was edited This must be done efore you install the MMS CAB as you can NOT edit once it is installed. Thats it!
When ever I get a video message I click download in the MMS window but then seconded later it says forbidden. I can't view any received videos, help me please!
MMS forbidden notification
I have exactly the same problem. I have searched all over this site for fixes and have installed the newer version of Arcsoft MMS and my settings and all the other things I've found so far and it still won't send MMS. I am now about to sacrifice a lamb and see if that works. If anyone has any other ideas about a real fix, I'd appreciate the help. I don't send MMS all that much, but I would love to do so.
I'm currently running the new PC.Ultimate.V15 WWE that was just posted, but I was having this problem before that. I actually think it must be a simple settings problem, but I have messed with about everything so far and still not had any luck with it. As far as I can tell, everything else works great.
Thanks for any help in advance.
Hello everyone...I searched and searched for this issue, and it seems that other people are having somewhat different problems, or they're related to a specific service (GMail, etc). For background: it's an ATT Tilt, running the standard WM6.1 ROM.
I'm having a problem with my EMail...it's downloading headers only...the body of the message is blank. I've already gone in and specified "Download entire message" in the settings, I tried deleting the account and recreating it, I turned the phone off (and removed the battery)...the whole nine yards. Could someone please tell me what the frak is wrong with this thing and how I can correct it? I don't know if it's a registry setting, corrupt file, or what...the fact that the problem recurs even after deleting/recreating the EMail account is truly frustrating.
In doing the research for this issue, I came upon someone who wrote a "Goodbye Kaiser" thread...I'm telling you, if there was a viable alternative phone with all the features I wanted, I'd be an inch away from joining him.
Superion said:
Could someone please tell me what the frak is wrong with this thing
Click to expand...
Click to collapse
Sorry, I don't have an answer for you, but I must support someone who brings BSG lingo into everyday life.
Damn toasters.....
Hi all,
I have a very annoying quirk with the way the Touch Pro sends a reply to an email. When you type an email and space down to start a new paragraph on a new line it looks fine when you type it but when you send it it pulls all the spaces out of the email making the entire thing one big paragraph. My Jasjam does not do this and I am wondering if anyone has a solution.
The strange thing is that it only does it on replies. If i start a fresh email it will actually send it maintaining the same structure I typed it in. Its the same thing regardless of whether i use the original shipped or cooked 6.1 or 6.5 roms.
Anyones help or ideas would be most welcome. Thanks.
Has nobody noticed this issue? or is it not so annoying?
It happens on all of your devices I would expect as I have seen a couple of devices do it. Its possibly a reg tweak somewhere that could fix it.
I have this problem too and it is annoying, but if you click on Edit sender's message while composing it'll send the whole message in plain text, including your line breaks. You'll lose any HTML formatting in the original message.
Many thanks for the tip. I just tried it and it worked fine. It would be good if MS or HTC or someone really clever here could find a system fix for it.
Thanks again for your help.
No problem. I've no idea why it does that, I had to mess around with it for a while and accidently found that workaround. My Hermes and Kaiser didn't have this problem.