Related
Has anyone got iGuidance 3.0.1 to work on a Tilt. I am getting mine tomorrow and really need this program to work. Thanks.
Sorry, 3.01 won't work on any WM6 device I believe. I found display issues, prog closes if you touch any key while navigating.
The good news is that v4 works great on WM6 and Kaiser for sure and I believe that it will work on Tilt as well. (If it won't work on tilt, I'd flash the tilt to the HTC rom).
V3.01 works GREAT on the Kaiser.
The only issue is that you need to disconnect the data connection or it wont boot up. Other than that, I have seen very few issues.
(If you dont disconnect data, it may take iNav 5 minutes or so to load up. When disconnected, it takes about 3 seconds on mine).
I have iguidance v4, but I have a problem with the maps. Instructions tell me to load the map folder on my SD card, but I don't want to put 1.4GBs worth of maps when I only want 1 or 2 states for the time being. Is there any way to just load 1 state's map?
Ken
Data Connection w/ iGuidence
Thanks for the tip about the data connection! That was driving me crazy. How did you figure that out?
kjones2k1 said:
I have iguidance v4, but I have a problem with the maps. Instructions tell me to load the map folder on my SD card, but I don't want to put 1.4GBs worth of maps when I only want 1 or 2 states for the time being. Is there any way to just load 1 state's map?
Ken
Click to expand...
Click to collapse
V3.01 came with a map-loader which let you select exactly what you wanted.
Look in your program files and see if you can find something like that.
Miclo77 said:
Thanks for the tip about the data connection! That was driving me crazy. How did you figure that out?
Click to expand...
Click to collapse
Trolling these boards and emails to iGuidance support. Glad it helped.
yeah i to don't like the map size so i went back to v4 until i get a 6GB card (or 8GB)
there is no map loader with v4 from what I have seen so I believe you are stuck on that point.. hopefully there is a solution to it that i just don't know of
Did you do anything unusual to get iGuidance 3.0.1 working? I keeps crashing on me on a fresh out of the box Tilt. Do you have it installed in main memory or on the storage card? I put it on the card and I'm wondering if that is my problem.
I knew about disconnecting the data, coming form an 8525 and an BT GPS
I'm suprised that 3.0.1 works on WM6, it closed abruptly on my 8525 (running Black Satin WM6) every time I touched any display button while actively navigating. Only the v4 worked solid for me. I personally don't miss the map loader since now the a single file contains the whole country including Hawaii, something you could never load except by itself due to some goofy NavTec contract issue. The v4 map is only 1.3 gig and 4gig micro SD's are now fairly available and reasonably priced.
I tried it and it took like 5 minutes to come up after clicking on the icon. Not good.
w4rmk said:
I tried it and it took like 5 minutes to come up after clicking on the icon. Not good.
Click to expand...
Click to collapse
Read previous posts on this thread. Disconnect Data before booting it up and it should be fine.
chop69 said:
Did you do anything unusual to get iGuidance 3.0.1 working? I keeps crashing on me on a fresh out of the box Tilt. Do you have it installed in main memory or on the storage card? I put it on the card and I'm wondering if that is my problem.
I knew about disconnecting the data, coming form an 8525 and an BT GPS
Click to expand...
Click to collapse
I didnt do anything special. I just loaded it up on the device (Storage card option) and went to town.
yeah i just loaded it on the device and put the map on the card. true about it only being 1.3gb but while i only have 2gb overall, until i get a new card.
kjones2k1 said:
I have iguidance v4, but I have a problem with the maps. Instructions tell me to load the map folder on my SD card, but I don't want to put 1.4GBs worth of maps when I only want 1 or 2 states for the time being. Is there any way to just load 1 state's map?
Ken
Click to expand...
Click to collapse
IGuidance v.3 works great (and is, imo, the best gps software available) on AT&T Tilt. Version 4, because it is one continuous map (instead of individual state files) is an all or nothing install. If that is a problem, I have a nice almost-brand new version 3 that I would ever so happy to trade you for so you can load only the states you need. Let me know.
RemE said:
I'm suprised that 3.0.1 works on WM6, it closed abruptly on my 8525 (running Black Satin WM6) every time I touched any display button while actively navigating. Only the v4 worked solid for me. I personally don't miss the map loader since now the a single file contains the whole country including Hawaii, something you could never load except by itself due to some goofy NavTec contract issue. The v4 map is only 1.3 gig and 4gig micro SD's are now fairly available and reasonably priced.
Click to expand...
Click to collapse
OK now I see the problems you are talking about. It starts up just fine and if I'm just using it to follow where I am (not navigating) it works fine, but if you tap the menu button to set a destination or try to pan the map, it locks up. This is on a freshly hard reset Tilt with nothing else installed at the moment. Program installed to main memory and the maps on SD.
OK I kind of found a solution (and maybe the reason why some people have it working.) The on screen keys will quit working after it goes into full screen mode. The solution unfortunately is going back to 3.0. That works for me because I don't use the spoken directions. I've seen over on gpspassion.com that 4.0 still has some bugs, so I will wait until they patch it to make the switch.
What did you guys do to get the GPS working? I just got my tilt today and I can't figure out how to get the GPS info working into iGuidance....any help would be awesome.
just make sure the gps settings in i guidance are set to port 4 with the 4800 baudrate. let me know if there are any problems.
p.s. make sure you mention your exchange server on the kaiser forum for those that didn't go from hermes to kaiser.
y2whisper said:
just make sure the gps settings in i guidance are set to port 4 with the 4800 baudrate. let me know if there are any problems.
p.s. make sure you mention your exchange server on the kaiser forum for those that didn't go from hermes to kaiser.
Click to expand...
Click to collapse
Ya I finally got it to work. I had it set up like that, but the phone wasn't picking up satelites in my house...but when I went outside it started working.
I'll re-post another forum thread later today for Exchange in the Kaiser forum.
Hi,
I hope that I am allowed to ask for this, I've checked around and can't find it anywhere and can't see anything that says I shouldn't ask!
I have co-pilot 6 (all legit, it came with my original mda vario from Tmobile UK) but have lost the CD's and the installation sd card got corrupted. I need to get it working again on my kaiser.
Does anyone have the installation cab that they could email to me or make available to download? As I said, I have a proper product key for it (i believe it wouldn't work without this anyway).
Any help would be greatly appreciated.
benbranson said:
Hi,
I hope that I am allowed to ask for this, I've checked around and can't find it anywhere and can't see anything that says I shouldn't ask!
I have co-pilot 6 (all legit, it came with my original mda vario from Tmobile UK) but have lost the CD's and the installation sd card got corrupted. I need to get it working again on my kaiser.
Does anyone have the installation cab that they could email to me or make available to download? As I said, I have a proper product key for it (i believe it wouldn't work without this anyway).
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Have you tried contacting T-mobile directly?
Yesterday my girlfriend told me all of a sudden her programs on her storage card stopped working. Well come to find out, it was like everything related to windows on the card was deleted somehow (program files, application data, etc.). She used to have the same card in a flip phone so the folders from that like music and pictures still exist. She hasn't changed anything on her phone, I usually do all that for her, so she wouldn't have done anything in that department.
Anyone heard of this happening before?
Any help would be greatful, I would like to possibly retrieve some files before I reformat the card.
Thanks in advance.
Step one: Buy a SD reader. You can get one on Ebay, Radioshack, etc. Very cheap. 5-25 dollars. I think 25 is even pushing it.
Step two: see if you can retrieve files with reader
Step three: after retrieving said files, format your SD card.
You forgot step four:
don't let girlfriends use technology and don't trust anyone when they say nothing happened
j/k
Very true. She sometimes can be a little thick, but with Windows mobile, who knows what can happen.
I've had the exact same thing happen to me. AT&T Tilt and 6GB Sandisk MicroSD.
File Explorer on the phone shows nothing on the card. Tried reading the card with a card reader on the PC and it also shows the card is blank. However, the Tilt's memory usage program still shows 3GB of memory is used on the card.
gman8966 said:
Anyone heard of this happening before?
Thanks in advance.
Click to expand...
Click to collapse
Same problem here (few times). Even change the SD card. Maybe something in power managment (kaiser tweak?)
Same problem here - lost a TomTom map just randomly - copied map back on, same files, same path.... still using and extra 1gb....
Good stuff...
Cart corrupting on Kaiser is often a problem, you can use a card reader and the soft R-Studio to try get your stuff back...it worked great for me =)
And after formating your card, try to install the Artemis plugin for Card corruption...=)
+++
oui oui said:
Cart corrupting on Kaiser is often a problem, you can use a card reader and the soft R-Studio to try get your stuff back...it worked great for me =)
And after formating your card, try to install the Artemis plugin for Card corruption...=)
+++
Click to expand...
Click to collapse
Something more about this plugin?
Second time after upgrading to official WM6.1 I lost my data
tom2402 said:
Something more about this plugin?
Second time after upgrading to official WM6.1 I lost my data
Click to expand...
Click to collapse
I have not heard about this plugin either. Interested!
I have had the same issue having lost tom tom maps pictures etc. I have actually installed the artemis card coruption fix as I had that phone b4 this one & it still has happened to me a few times. I am going to format card one last time & the phone from default & see if this occurs again, as I believe it to be caused due to excess heat from the device but that is only a hunch as each time it has occurred the phone has been red hot prior to this.
As you might probably knew already, Windows Mobile 6.1 is having problem with USB mass storage emulation software like SoftTick CardExport or WM5Storage.
If you have SofTick CardExport, please report it here :
http://softick-forum.com/viewtopic.php?t=1498
Because if more people reported there it will get more attention.
And I believe (hope) that it will also benefit the WM5Storage (I still remember that in the olden days, we need to install Softick trial version to make the WM5Storage work).
I upgraded my Kaiser yesterday to official WM6.1 and wasn't aware of this problem yet:
infact I've a x51v WM6.1(LennySH Dell Stock Beta 7) and with Card Export II 3.08 I can explore both SDHC cards from my PC-XP.
So the problem with Card Export II,probably,is linked to Kaiser and not to WM6.1
Just curious, but what problem are you having? I am using Card Export II 3.11 with Dutty's 4/29/08 6.1 rom on my Tilt and all seems to be working fine.
Hi, i have a Problem too. When i activate WM5torage, my windows recognize my sd card as a usb stick, but i can't grab on it. My Windows show me the Message "Its not Card in", But it is a card in. Can one help me.
Tnak you
Card Export fixed !!!!!
http://www.softick.com/pocket-pc/cardexport2/
Its now FIXED!! and works great for wm 6.1 upgrades. My tilt is now whacking across over a gig of photo files without stopping for a pause. USB settings DO NOT need messing with nor do any of the CardExport functions.
Install.....and use as a mass storage device. I did not need to play around with any of the settings either PPC or PC end.
great program. was surprised my tilt didnt come with this..
I've flashed about 10 to 15 WM6.1 ROMs and have used Card Export II successfully in every single ROM. I don't think it's a 6.1 problem.
Cooking CardExort II into a ROM?
I have tried a few times to make an OEM package out of CardExport II but have never managed to get it to work. I installed the Application, copied all the files off and did a registry export. I then searched through the exported registry file and extracted all (I think?) the CardExport II entries and built an OEM package. So I have at the moment an almost working package however when the application is launched and you click connect, ActiveSync disconnects OK, then a few seconds later the big button on the Kaiser turns from Disconnect back to Connect and ActiveSync re-connects.
Has anyone sucessfully made an OEM package of CardExport II to include in a ROM?
Cheers
Andy
nicholasendean said:
http://www.softick.com/pocket-pc/cardexport2/
Its now FIXED!! and works great for wm 6.1 upgrades. My tilt is now whacking across over a gig of photo files without stopping for a pause. USB settings DO NOT need messing with nor do any of the CardExport functions.
Install.....and use as a mass storage device. I did not need to play around with any of the settings either PPC or PC end.
Click to expand...
Click to collapse
and what is a serial number???
hi you have written that cardexport work for you,. I downloaded it from your link and installed but it doesnt work and it needs serial number(with any ROM i have tested so far)...how did you fix it?
thx
peto01 said:
hi you have written that cardexport work for you,. I downloaded it from your link and installed but it doesnt work and it needs serial number(with any ROM i have tested so far)...how did you fix it?
thx
Click to expand...
Click to collapse
You could fix it by sending a few dollars towards the developer. Best 15 bucks I ever spent on windows mobile software.
http://www.softick.com/mobile/pocket-pc/cardexport2/
rob.ocelot said:
You could fix it by sending a few dollars towards the developer. Best 15 bucks I ever spent on windows mobile software.
http://www.softick.com/mobile/pocket-pc/cardexport2/
Click to expand...
Click to collapse
What he said.....
I use Windows mobile 6.1 and it works fine for me. They have the best protection on the software I have seen and I believe it still hasnt been cracked. Most people who have a problem with this software are using a cracked version which doesent stay cracked for very long, it then stops working in many different ways IE on the website's FAQ
Q: My Card Export II works fine but sometimes it says that "Wrong usb status returned by underlying driver". How can I fix this?
A: Just do not use cracked or patched versions. If you like Card Export II, consider purchasing it. Card Export II costs only $14.95. After receiving unlock code, remove your patched version from your handheld and install fresh version from our web site. After that register it using unlock code you have received from Softick.
Best app on my phone....
Hello,
my problem is at wm5torage:
when I start a java application it doesn´t work. It comes the error:
"Cant´t switch to Mass Storage USB driver, error 1f. Maybe some programs or plugins run from or have files open on storage card...."
But I have no contact at this time to the SD-Card.
Card Export works at the same place. But it isn´t free, so I try to use WM5torage, because it is free.
Can anybody help me with this problem?
Thank you
Best regards
Mathias Kant
hello all.
no matter what the wifi doesn't want to come on in the comm manager. Even if it's clear storage booted. And gps as well doesn't work. what do I need to change/replace/repair?
any help appreciated
mines is doin the same exact thing but i can get wifi just no gps
You tried changing the rom or radio?
thats my next stop im shoppin for a good one now
I found quickGPS stopped working (continually failed to update and said it had never been run) after I updated the installed version of TomTom Navigator from 6 to 7 recently. In the end a hard reset and reinstall of TTN 7 fixed that. It was a simple process for me as my setup is standard other than the addition of TTN. If you want to resolve it by fiddling around with registry entries and cabs etc, then we need to know what changes were made immediately before the problems arose.
I think it may be a hardware issue more than software.
also kaiser tweak installs about 50% of the time when doing a hard reset. it can't find 1~temp file or so..
I think i'll just deal with and move to the X10/android. Windows doesn't care anymore and i'll never buy an apple product so android it is..
BTW, where can I buy a mainboard for the tytnII?
amitsivak said:
I think it may be a hardware issue more than software.
Click to expand...
Click to collapse
What makes you think that?
I think i'll just deal with and move to the X10/android.
Click to expand...
Click to collapse
If you've got the money to splash out on a new phone then that's one option but why not save yourself some cash and try to get what you have working properly by spending as little money as possible first?
BTW, where can I buy a mainboard for the tytnII?
Click to expand...
Click to collapse
There you are keen to spend loads of money again. If it's just a mainboard that's required then you're best bet is to find a TyTN II which has failed through some cause other than the motherboard and use it for parts. By all means check prices with your HTC repair centre but it won't be cheap new.
Now, this is something I should have mentioned from the word go, in order to provide any sort of meaningful assistance, we need to know what ROM/Radio and SPL is on the device now and have any changes to these occurred? If you don't know how to find this out, check the xda-wiki for further info and may the force be with you. You mention wifi and quickGPS in the subject yet GPS (ie the navigation application itself) in the content, which is it?
I just have the ATT software that came with the tilt. I don't have a backup phone and have no experience with Romming so i've put it off. Maybe I should look into and give it a go...maybe that will fix my wifi/no quickGPS connection.
I think I do want to get the X10 because of the rez and screen and keep the Tilt as a backup.
thanks for the help.
Time to call AT&T if reading the wiki and hard resetting fails
amitsivak said:
I just have the ATT software that came with the tilt.
Click to expand...
Click to collapse
You haven't mentioned what network you're connected through but if it's not AT&T (ie someone has unlocked the phone), then you will have some problems with the default ROM. If you do use it with AT&T then if you've already read all the relevant xda-wiki pages here related to the Tilt (it has its own page and you should definitly read it) and are still getting the problems you've described even after a hard reset (try the D Pad button method), why not see what AT&T have to say about things? I suspect a hard reset will fix it though if there have been no changes to the ROM/Radio or the SPL and you're with AT&T.
Internal GPS problems
I have also problems with the internal GPS of my TyTn II.
I changed the housing of my TyTn II because the old one was pretty trashed.
Now when I have new housing, the GPS doesn't work anymore.
Everything else is working just fine except that damn internal GPS.
I've tried three different navigation software which I have in my phone's storage card, TomTom 7, Garmin and McGuider. No hope, the GPS is not working.
McGuider can find the internal GPS automatically but none of those navigation programs are able to get GPS fix. I've tried Quick GPS and HTC GPS Tool. Nope, doesn't work...
OK, what should I try next? Hard reset? Or just accept the fact and get another TyTn II?
Well, maybe my TyTn II would still work with external GPS but I wouldn't like to a) purchase it and b) carry it with me.