Related
I read several posts about the phone freezing while charging or by itself. my phone does the same thing - has anyone figured out how to fix this problem - its really annoying to miss important calls because of that. my phone does it couple times a day and i am running one of the summiter roms and SBPocket weather and icalendar nothing else.
Any help would be appre :!: ciated
Never come across this untill 2 days ago. My phone appeared to have locked up - The time had not changed in 2 hrs, no buttons (hard or soft) would respond. I wish I had tried to call the phone to see if the radio would still respond but I only thought of it after I had reset it.
I have no idea what has caused it although the last thing I remember doing was kicking off an update of Journal Bar. Hasn't happen since.
Mine does the same thing, occasionaly. Most recently, today.
I connected it to the USB cable, Active Sync indicated that it was connecting, but never progressed past that. I forgot about it and a few hours later unplugged it from the computer and it was still frozen.
I didn't try to call it either, will do next time. I had to use the little soft reset button to reboot it.
Running summiter's TEST2 rom, plus PocketWeather SBSH and SBSH PocketBreeze 5.1.01. Also running RhinoStat v3.0.
Ok, I had my phone lock up on me again, this time the screen was off, the buttons wouldn't wake it, the only sign of life: blinking green LED.
I tried calling my phone number from the land line and it rang several times on the land line, but no ringing or activity from the wizard (other than it winking at me with the blinking green LED).
The frustrating parts are a) missed calls and b) you have no idea how long it's been frozen!
I had the same problem until I disabled the password feature. Now the mda never locks up. It use to be a blank white screen or no response at all. After I disabled the 4 digit password feature it has not locked up since. Just my 2 cents worth
[quote="The frustrating parts are a) missed calls and b) you have no idea how long it's been frozen![/quote]
Just a small point, I could always tell how long it was locked up because I display the clock in the top bar which displays the time it iced.
Oh by the way I don't and never have used passwords to secure the device.
I've had my Kaiser a few days now, here's a few problems that i've had... anyone had anything similar?
- Windows Live Today addon stops working... can't scroll left or right
- HTC plugin goes fuzzy... can go into programs/settings, but nothing actually loads up when clicking on it
- After using the phone, the screen goes dim... so i have to manually reset the brightness
- D-pad stops working after using the phone (can't scroll through TXTs/Emails etc)
In most cases i have to reboot to fix :S
I was hoping WM6 would be a lot stabler... but so far it doesn't seem all that great :S
Hi,
I haven't had the problems you have, not even heat yet as has been discussed. Perhaps it's because I am not taxing the unit yet.
However, I have not been able to synch my PC to the Kaiser to yet. Synching pictures, music, TV is not an issue because Windows Media Player is working. It's the Contacts, Notes, Tasks that I cannot synch.
When I open the Windows Mobile Device Center the Connection Settings window opens up with the Allow USB & Bluetooth Connections radio buttons. When I hit OK with both Radio buttons selected (USB & Bluetooth), that's it, the window closes and there's no Windows Mobile Device Center that opens up. Task Manager shows no open Windows Mobile Device Center application but does show a Windows Mobile Device Center process, wmdcBase.exe.
What am I missing here? Please help, 4 days & I still do not have my Contacts in this phone.
This is a duplicate post from lower down.
Cheers,
Phil
Pooper said:
I've had my Kaiser a few days now, here's a few problems that i've had... anyone had anything similar?
- Windows Live Today addon stops working... can't scroll left or right
- HTC plugin goes fuzzy... can go into programs/settings, but nothing actually loads up when clicking on it
- After using the phone, the screen goes dim... so i have to manually reset the brightness
- D-pad stops working after using the phone (can't scroll through TXTs/Emails etc)
In most cases i have to reboot to fix :S
I was hoping WM6 would be a lot stabler... but so far it doesn't seem all that great :S
Click to expand...
Click to collapse
1) this happens but only with the D-Pad sometimes. This also happend on the TyTN
2)haven't had that problem
3)Screen goes dim but if I touch the screen it comes back on
4) haven't had that problem
Pooper said:
I've had my Kaiser a few days now, here's a few problems that i've had... anyone had anything similar?
- Windows Live Today addon stops working... can't scroll left or right
- HTC plugin goes fuzzy... can go into programs/settings, but nothing actually loads up when clicking on it
- After using the phone, the screen goes dim... so i have to manually reset the brightness
- D-pad stops working after using the phone (can't scroll through TXTs/Emails etc)
In most cases i have to reboot to fix :S
I was hoping WM6 would be a lot stabler... but so far it doesn't seem all that great :S
Click to expand...
Click to collapse
Screen goes dim and the start menu does not work. This is because of the password pin set on your phone. If you deactivate it, it should be fine. It's definitely a bug on the Kaiser. There are registry hacks for this, but I have no idea how to get around it.
regarding the screen dimming, I assume this is with the HTC ROM.
My phone has been fine with the latest two AT&T ROMs (the first ROM had this prob, the screen would dim after 10 seconds). You can temporarily fix the problem by resetting the Backlight timeout Settings.. Backlight... Battery Power tab) to something like 1 minute. It will keep getting reset every once in a while though... You can also turn off the backlight timeout completely (unchecking the box), which seems to work longer.
BTW it seems to be a problem with the HTC Home plugin. When I installed the original AT&T ROM but didn't install the HTC Home today plugin, the problem did not happen.
I have seen the D-Pad problem in Outlook only - that is, hang up a call, then d-pad doesn't work to navigate thru email. Once email is open the D-Pad works... Solution is to kill (click x button) Outlook.
M
Screendim
Screen goes dim and the start menu does not work. This is because of the password pin set on your phone. If you deactivate it, it should be fine. It's definitely a bug on the Kaiser. There are registry hacks for this, but I have no idea how to get around it.
Click to expand...
Click to collapse
Same here, screen dims and startmenu does not work. Issue is I can't deactivate pw (corp security pollicy for pushmail client).
Could someone elaborate a bit on the possible reg hack that could fix this?
Thanks...
Hi
I made a small app that helps overcome this issue by making the phone usable again after a phone call.
You can get install instructions from here with a file a few posts down: http://www.modaco.com/index.php?showtopic=258974&view=findpost&p=841951
Hopefully it will be fixed by HTC soon so it's just a short term work around.
Regards
Phil
Thanks
That works, thank you very much for your effort!
We'll wait for the HTC fix.
mrpotts said:
However, I have not been able to synch my PC to the Kaiser to yet. Synching pictures, music, TV is not an issue because Windows Media Player is working. It's the Contacts, Notes, Tasks that I cannot synch.
Click to expand...
Click to collapse
You need Outlook installed to sync those.
Add this - SMS goes bust!
Details are here:
http://forum.xda-developers.com/showthread.php?t=330176
i had a 3g connection with google maps running in background (gps was accurate within 10 feet) and was playing namco's ms. pac-man on the tytn ii rom when device locked up mid game. Power button would put phone into standby, but it was locked up besides. i had to soft-reset.
Cool, do HTC release updated ROMs via their website?
Also, ive had the home plugin going fuzzy and locking up quite a few times now.... definitley more problems introduced since i enabled the 'lock' feature :S
No call button??
On the dialpad is no call button only videocall button???
Am i blind?........
With my phone the 'ok' button (not on the keyboard) doesn't always respond (well). Either to confirm a adjustment or to minimize/close an screen
I have found a pretty simple workaround for the issue with the screen going dim and the start menu not working after a call.
What appears to be happening is that the device is actually locking the screen yet the keypad to unlock is not displayed. So the start menu and such think they are locked. I found that if i simply power my device off and back on the password screen/unlock screen shows up. Unlock it and you are fine from there.
Not really a fix but it will save you a reboot.
Hmm im getting lots of sync problems with Windows Live :S, also my phone 'says' it's connected to 3G/H but then randomly doesnt send texts :S
Really starting to annoy me now!
Hey everyone
Has anyone else noticed that their TyTN II wakes from standby when switching between GPRS and 3G. At least I think this is why mine appears to wake up randomly! It will be sat on my desk in standby mode and then the screen will switch on and the signal strength bars will move.
I've checked to make sure nothing is running in the background and performed a soft reboot.
Any ideas?
Hi
The Kaiser does turn on at least once every hour (some house keeping tasks), and will turn on if the mobile signal is lost. However these on's are in unattended mode which means the device appears off to the owner so the screen will not come on.
If you have some software that likes to do work or updates the today page for example, that software may be detecting the device has turned on and in order to get your attention or just through bad programming, issues a power announcement to say turn on proper, hence the display lights up!
Regards
Phil
Thanks for the info, I'll have a look what I have on there and try and isolate what is causing the power ups.
Cheers for the help.
If you have sprite backup installed with the auto backup on low power option that causes occasional power ups to enable the power check.
I may have solved this issue. After uninstalling enAlarm the phone, no longer appears to be waking. I'm still monitoring it though
i have the same problem when im signed on to AIM. Once i sign off it stops waking up, but if its on it'll wake up every 5 minutes or so, and it is in fact annoying. Havent found out the solution for it yet so i just dont really use it that often
nando223 said:
i have the same problem when im signed on to AIM. Once i sign off it stops waking up, but if its on it'll wake up every 5 minutes or so, and it is in fact annoying. Havent found out the solution for it yet so i just dont really use it that often
Click to expand...
Click to collapse
it's when a friend log's in or out of AIM.. it's a paint, rediculious and ATT refuses to get rid of OZ messanger and use a real one.
here's the kicker. it supposed to use TEXT , but when a friend logs in or out, the message is sent to your phone, and then DATA brings up the list..
STUPID and ignorant of ATT but,. big companies do what they want!
I have been having the same problem as well. I just installed this DeviceLock program:
http://forum.xda-developers.com/showthread.php?t=305402
If you enable the "Lock on Wake" option, the device will be locked when it wakes up, so the backlight stays off and you won't call anyone by accidentally hitting buttons.
Also, I ran across this related thread you might want to check out (basically talking about the same thing, but for the Tilt):
http://forum.xda-developers.com/showthread.php?t=335433
I've been using my HTC Diamond for about 2 weeks now.
Bought it from www.plemix.com and it came unlocked , and I had no trouble at all using it and installing the HardSPL's / updating ROM (Dutty's Diamond v1.6) .
Today I ran the TomTom Navigator 7, and after a while it started to make continuous sound - the default sound when a button is pressed or touchscreen is tapped- , so I did soft reset a few times, didn't solve it, touchscreen was kinda jammed, and I took out the battery. A minute after I put it back, and it worked fine, I took some photos right after, and everything was working fine.
Then two hours later, I took out my phone from pocket to check the time, I see it's halted on the photo screen, and no response at all. So I just turned the phone off by taking out the battery, and just left it off until I came home.
Now the touchscreen is not responding to any taps or clicks, except that it seems that it still detects any sort of tap/click, because the backlight comes on from dim state when I try to tap it.
So it definitely means the touchscreen is not completely dead, but it's just not functional most part.
Hardware buttons works fine, but I'm stuck at the initial "Tap your screen to begin configuring your Windows Mobile" after hard reset. I even updated the ROM to Dutty's Diamond v1.8 just now.
Since I can't do anything and just leave it idle, it goes to [ Align Screen ] page, and still I can't press any cross, since the touchscreen is completely not responding.
Anyone had this screen death problem? Any method of solving it?
---Updated---
Just now the touchscreen worked for 30 seconds, i could actually align the screen, then it showed me the Date/Time setting page, where I could scroll the cities , but then it stopped working again. So i'm still at Date/Screen page...
--Updated--
The touchscreen works for 2 minutes after I do a soft reset / power on&off, or I should say, it works until you press some hardware key on the bottom (volume up/down buttons doesnt affect this).
After I press any of those buttons at the bottom, the touchscreen stops working.
Also, after I turn on the device, enters WM, and runs TouchFLO3D, for the entire time touchscreen works, it's constantly pressing the tasklist dropdown (upper right corner of the screen), making it constantly pop down the task list.
have you tried a hard reset?
Yes, like 3 times. Wiped everything, OS, ROM, NANDFlash.
Also updated the ROM from 1.6 to Dutty's 1.8 ROM. Everythingn works fine except for the Touchscreen.
Right now, when I turn on, the touch screen seems to be pressing all the time at the task manager part of the screen (where the [X] is), its popping up all the time the task list, then after a while, like say, 2 minutes, touchscreen again ceases to work.
Not really promising, but you could try to remove the screen-protector. Perhaps this releases any tension onto the screen.
Thanks. I've thought of that, maybe I'll try later on.
For now i'm suspecting that maybe water went in through, so I've put the phone upside down to maybe take out the water using gravity for 2 days.
It seems like it's working better now, with longer hours of normal functioning..
I'll wait and see one more night... if water is the cause of the problem, it should dry up in say 3-4 days.
It may sound strange, but pit it face down on the carpet and rub it around for a while. Its how I fixed mine. Don't ask me why it works but I had the same thing happen. I think somehow the electrical charge got dissipated from the screen and the static from the carpet recharged it.
Actually your words makes a lot of sense
My Diamond was acting completely alright today, used GPS for 2 hours and called a few people along with many weather updates.
Seems to be working fine now...
But I think what you said is pretty reasonable, since when I rubbed my dead screen , after a few rubs it started to work (2 days ago).
Thanks
yeah this had happened to me about a week ago exactly the same thing I had hardspl mine and updated radio to .05 and then a few days after I had the identical problem. However I took a shortcut and sent the phone back in and requested a replacement claiming it was defective they agreeded and sent a new one however this one already has .05 radio on it so I didn't have to hardspl it. I can't say any of these things would have worked form me as I did not try them byt symptoms are identical. my .02
Hi all. Got my first ATIV S Neo with Sprint a couple weeks ago, had graphical corruptions, and random reboots, replaced it for another.
This one works much better, but there are some issues I'm seeing (nitpicking?) and I'm not sure if I have another defective handset or if this is just WP8, or if this is common to just this handset. Came from an HTC arrive on WP7.5 and things were pretty stable.
1) Occasional live tile animation stuttering; If I, for instance, go into the messages hub, sometimes the live tile swing animation will lock for half a second and then immediately pop into the message hub. Happens loading other apps too.
2) Occasional lock screen weirdness;
2a) very rare; press power button, screen comes on, screen fades out like the phone lost power but not to backlight, then backlight shuts off, pressing the power button again, everything works fine.
2b) occasional; in a dark room, press the power button to wake to lock screen, press again to turn off. screen/backlight goes out, backlight comes back, then goes out, then quickly comes back and back out.
3) in IE, typing in the address bar, text input freezes as it brings up suggestions from bing. (type "google.com" and get "gole.com"). disabling search suggestions makes it go away.
4) Text notifications stop working; sometimes the text notification sound stops playing (vibrate remains working). Reboot corrects it. Have also had it where the vibrate alert goes away and not the sound.
Anyone else seeing these? Are these known or is this phone also messed up?
Haven't seen those on my (open-market GSM) ATIV S, but there were a handful of glitches when I first got the phone. Those were corrected in the first big fiormware update from Samsung in my case, but I had to wait a few months for it.
GoodDayToDie said:
Haven't seen those on my (open-market GSM) ATIV S, but there were a handful of glitches when I first got the phone. Those were corrected in the first big fiormware update from Samsung in my case, but I had to wait a few months for it.
Click to expand...
Click to collapse
Thanks, that makes me feel a little more comfortable. These problems really don't feel like hardware to me, since they're fairly infrequent. I might have to stop by the sprint store and test the display model out a little.
???