"3G" Notifiaction in the status bar - Tilt, TyTN II, MDA Vario III General

I need your help as I installed the Cab "dutythroy_black-3g-comm-manager_.cab, and after uninstalling this CAB I found that the "3G" Notification in the status bar beside the network signal is became only the sign "G" ; is there is anyway to return the sign "3G" back I tried the Hard reset but it is the same

I'd suggest a SEARCH, this has been asked and answered 100 times.

I tried the search but with no luck is that posible to help me with any link

any one can help me in the "3G" notification symbole as it is now "G"

"3G" notification symbole as it is now "G"
I still need your help

is there is any solution as i tried hard reset 3 times and still no luck

Related

Grey edge icon

Hi, ocassionaly I can see that the Edge icon on my Diamond turns grey (it's shadowed) - never seen this state before, anyone know what it means?
I also have been getting that. I dont think it matters if it's EDGE, GPRS, 3G, or HSDA as I have been getting it with 3G after a soft rest
when I put a 3 SIM card in.. in place of the H icon I get an icon that looks like a mountain... triangle.. what's that mean? any ideas?
happyguy82 said:
when I put a 3 SIM card in.. in place of the H icon I get an icon that looks like a mountain... triangle.. what's that mean? any ideas?
Click to expand...
Click to collapse
Triangle means roaming - so beware the costs!
When it's grey, means that it's not "Attached"...
Bye
I kept getting a "Grey" H icon and I actually found that I couldnt connect to the Internet. Also some of my texts wouldnt send and I couldnt make calls either (not sure if its related or not)
The only way I found to solve it was to switch HSDPA off, now I get the 3G symbol but its not "Grey" anymore and everythings working fine.
this is issue is also reffered as "black icons issue". have a search over this forum and you will find many reports of the same.
No, that's not true. This is completely different issue.
Also it's not true that the gray icon denotes unattached GPRS. For unattached GPRS, there is no extra icon, you just see the aerial icon instead of small letter inside the "signal strength" icon.
The grey state is weird, never experienced before on any device, and it's not explained anywhere so far.
I couldn't find it right now (though I'll still search it), but I've changed a setting yesterday and after this, the "grey" icons appeared. Untill then I had the "filled"/normal ones. That setting is for telling if the data connection is ALWAYS available or only BY REQUEST/ON DEMAND (from an application that needs it).
As soon as I'll find it again, I'll post it here.
i disabled the GPRS auto attach and the grey 3g icon started to appear...no longer the filled one...
I have the same problem since yesterday with edge on my workplace: big grey "E" icon, and it's impossible to connect to the net. But I have 2 or 3 network bars and a little "E" in the top left of them. At home I have HSDPA and no problem
i have a grey 3g icon... only came on after i disabled the GPRS auto attach function in advanced config...
I had disabled that function too. I've just re-enabled it and soft reset but I see no difference, it can't connect in edge
Peio64 said:
I had disabled that function too. I've just re-enabled it and soft reset but I see no difference, it can't connect in edge
Click to expand...
Click to collapse
I had an isue a long time ago.
When I disabled/detached my GPRS, it was detached from my provider, ie it was detached on the mobile central.
Only way I could get it working again was to call my mobile provider to have them enable it again.
Yeah but it works on 3G and HSDPA, it's not the same parameters?
Rapier said:
I couldn't find it right now (though I'll still search it), but I've changed a setting yesterday and after this, the "grey" icons appeared. Untill then I had the "filled"/normal ones. That setting is for telling if the data connection is ALWAYS available or only BY REQUEST/ON DEMAND (from an application that needs it).
As soon as I'll find it again, I'll post it here.
Click to expand...
Click to collapse
This is correct. Grey means Gprs/Edge/3G/Hspda is available, but not necessarily attached. When you connect (fire up a browser/mail/any other internet proggie) it will go black (and a lot bigger and uglier I might add). It's a bit confusing cos when you disconnect, it STAYS black, which is probably a bug.

Roaming symbol wouldn't leave me alone

Hi all,
I'm trying to find a solution or an explanation for the roaming symbol that wouldn't go away (the triangle-like symbol).
I've installed NoData.cab, disabled 3G, and changed my connection settings to "My Work Network".
The "E" symbol is also there too and it's "greyed".
Can anyone tell me what's wrong?
Many thanks.
llee824 said:
Hi all,
I'm trying to find a solution or an explanation for the roaming symbol that wouldn't go away (the triangle-like symbol).
I've installed NoData.cab, disabled 3G, and changed my connection settings to "My Work Network".
The "E" symbol is also there too and it's "greyed".
Can anyone tell me what's wrong?
Many thanks.
Click to expand...
Click to collapse
I don't now where you live but here in Holland I had the same problem when I installed the latest rom update this was because the operator setup wasn't corect it was connected to my providors network (Telfort KPN) but a sort of subnetwork was connected (chiq) when I installed Duttys connection setup the problem was solved.
Whit advanced config you can also stop the roaming warnings.
Hope this help
Willem

Service icon won't refresh

Upon some reading of the user manual, I have decided to edit my post.
The service icon on my Tilt (shows the big E, 3G, H, etc), which also shows the wi-fi radio and whether I'm connected to a computer, has stopped refreshing itself.
After starting up, it shows the opposing arrows with an "x" indicating no service. I do have service, though. If I do anything (activate wi-fi, connect to a computer, etc), the icon changes to that, but once done, it stays there. It doesn't refresh back to the big H (or E) that should be there, nor does it go all the way back to the no service indicator.
The most recent thing I did before this happened was to try a registry tweak to remove the clock (and hopefully put up the battery meter) in PointUI Home 2. Even after undoing the tweak, the icon still doesn't work.
Any and all help is greatly appreciated.
If it helps have things make sense, it's the big connectivity icon, not the little service icon with the bars.
If I connect via wi-fi, when I turn off wi-fi, the icon stays the same. If I connect to a computer, when I disconnect, the icon stays the two opposing arrows. After a soft reset, I get the two broken arrows.
Regardless, I never get the E or H I used to normally have.
Help anyone?
I tried installing JUVS's Large Title Bar and while the small icon on the title bar wasn't right, the large icon for the connectivity was the large H I've been missing. I do have the small H with my signal bars, but have not had the big connectivity H icon (or E or G) for a couple weeks.
Does anyone have any clue?
Is the lack of suggestions due to things not being clear, or is everyone actually stumped?

Problem with data connection

Sorry if the answer to this is very simple but I have a strange problem with my diamond2 connecting to the internet via hsdpa.
I bought my the phone with an Orange sim card and everything works as it should, email, internet, everything.
I've tried my t-mobile web&walk sim which did seem to work ok, but now when I try to send / receive emails I get nothing. I have a H at the top, with a small h next to it with the signal indicator. I expect the signal indicator to change to the two horizontal arrows but nothing happens. At first I was getting a message that Windows live was unable to make a connction and to check my settings but now I get nothing.
Can anyone shed any light? Strangely, when I open the browser I can access the web no problem.

[Q] Wifi and Signal Icons.

Hi guys.
I just wanna ask is there a way to move the signal icon to the left while wifi icon remains at the right side.
I have tried a lot of methods, but still no luck. All the methods made my signal icon AND wifi icon move to the left instead of wifi remains at right.
Is it possible to do it ? Or the wifi icon must be "sticking" with the signal icon ?
Thank you for helping/teaching/advising me. Thank you. Appreciate it.

Categories

Resources