is the Windowns Live Connect only through Data Connection ( GPRS , 3G,...) OR We can use the Wifi instead as it will be cheaper
thanks
emad.ibrahim said:
is the Windowns Live Connect only through Data Connection ( GPRS , 3G,...) OR We can use the Wifi instead as it will be cheaper
thanks
Click to expand...
Click to collapse
Windows Live works just fine on wifi too.
every time I try to connect it must connect through data connection and can not connect through the wifi could you please help
BR
Dear Sir TaurusBullba
I need your help as you are now online , I post anopther issue today :
I need your help as I installed the Cab "dutythroy_black-3g-comm-manager_.cab, and after uninstalling this CAB I found that the "3G" Notification in the status bar beside the network signal is became only the sign "G" ; is there is anyway to return the sign "3G" back I tried the Hard reset but it is the same
the 2nd issue the Windows live connection as when I started to setup my hotmail account in it it connect direct to Data Connection and when I disable it to connect to My Wifi Connection , it takes along time and it says that i am out of data connection and I have to go to the Data Connection again to work fine
sorry for intruption but this 2 issues I need to solve with your help please
emad.ibrahim said:
every time I try to connect it must connect through data connection and can not connect through the wifi could you please help
BR
Click to expand...
Click to collapse
Live tries to connect via 3g/gprs by default, just connect wifi, then sign in to live - as soon as gprs connection starts, hit cancel.
It will be fine.
unwired4 said:
Live tries to connect via 3g/gprs by default, just connect wifi, then sign in to live - as soon as gprs connection starts, hit cancel.
It will be fine.
Click to expand...
Click to collapse
thanks for your reply, do you have answer for the 3G Signal that dissapeared and instead of it it only "G" after i unidtall the comm cab as I explained in the previous post
and for the Windows live I tried this morning the updated version and uninstall it and make a hard reset , is that may be the reason for all this mass
Related
anyone know how i can stop this? also when i try to log in on agile messenger, it says cannot connect with the current settings...
anyone suggest why this is happening? and how i can change it so i can log in thru wi-fi?
thanks
Try connecting wifi, then connecting using agile messenger, even if GPRS does connect after that point, it will be using Wifi.
Also make sure your device knows that your WiFi connection is used to connect to the internet and not just a vpn.
Melty said:
Also make sure your device knows that your WiFi connection is used to connect to the internet and not just a vpn.
Click to expand...
Click to collapse
thanks... wi-fi connect succesfully, just that when i open Internet explorer or something...it will say Vodafone Internet GPRS connecting...obviously i dont want that to connect when im already connected...
also how do u set the device so it knw wi-fi is the connection and not just the vpn?? some guide would be appreciated
thanks
Please help !
I can connect to my home Broadband using my XDA 11i but cna't get it to actually SHOW any web pages.
It tries searching but keeps trying to connect by GPRS .... sorry if I haven't explained it so well .
ANyways I can use the XDA for normal internet use BUT can't actually see any web pages when I try to connect by WiFI EVEN THOUGH the device says that it HAS a GOOD connection to my HOME BROADBAND !!??
HELP !!!!!!!
hi
i have the same problem on my ppc and i don't know how to access internet thru my adsl at home. it always connects to gprs for internet, messenger or email!! plz help
try checking if you really are connected thru your wifi. if so, open explorer on your phone while it is connected thru wifi, you'll konw when the icon circle with 2 arrows appear steady.
if not, set your settings to "the internet" instead of "work" then try again.
or you may be far from your wifi source, just for testing try to sit down in front of your wifi router while browsing.
worst comes to worst have a master rest and try again.
It does connect using the WiFI broadband but son't show any webpages and keeps tryin gto conect to GPRS >
Any SIMPLE suggestions ?
Thanks.
you obviously know how to turn on wifi on your alpine yes?
tunr on your wifi then go to the there is a little icon at teh bottom of the screen that shows all avalable connections, hold over select your home wifi connection, click connect when it appears select "internet" enter your wifi password and thats it, it will use your adsl connection if you turn on your wifi before you try to access the net, if you dont it will use gprs.
wifi must be on and connected before you use outlook/IE/opera ect. default is always gprs
Tried everything you said above -no luck !
Thanks anyway !!!!
wi-fi query
Hi zincubus try un-ticking automatic connect to non preferrred networks worked for me.
Thanks blowpipe - how do I find the OPTION you mentioned - I have tried so many different ways !
I have seen the it somewhere JUST can't find it now .
Thanks
wi-fi
Hi Zincubus look in wireless manager, there you have 3 symbles gprs blue tooth & wilan if you see these your'e on the correct page ,look along the bottom of the screen click on the symble like a pda with an arial on the side ,then you will see a square next to automaticaly connect to non preferred networks ,un tick it , then try to connect to your network ,good luck.
hello there,
When I try to run messenger with only the normal phone radio active G (not 3G) it doesnt work. When I plug in my USBcable, it also works. It also works over WLan. (wich I guess is WiFI)
Im on the Dutch 1.93 Rom. Msn Version: 10.6.0039.1300
bump
still haven't figured it out..
i'm in the opposite boat... cant get it to work over wifi...
stupid thing... i can browse net using opera / IE but it tries to use GPRS when i have a good wifi connection!!!
Newer Windows Live always tries to connect using your default Internet Connection even when you are already online. To solve this, you need to go to:
Start->Settings->Connections->Advanced->Select Networks. Change everything to My Work Network.
With this, Windows Live won't try to connect when you have active internet connection. The problem now is, if you have no active internet connection, it will force your device to connect to your gprs/3g but will fail to work. You will need to reset the setting above to your gprs/3g connection.
Hi,
I have a problem with the GPRS and Wireless connection. I am using Windows Live mail and and set it up so it is manually synchronized! Same with other mail accounts.
But, every time I connect to the internet using wireless and then press Send/Recieve, it keeps opening GPRS and use it to retrieve new e-mails and ignores my wireless connection!!! Which is really annoying.
How do I fix that?
I have exactly the same... but then with internet sharing with my laptop... keeps using my gprs/3g instead off the wifi that is 100 times faster.
annoying
and it is really annoying as you said, it is much faster with wifi and for people like me where I do not have monthly GPRS data included, it's really annoying and costs a lot.
Earlier, I had my e-mail to automatically download new emails daily and suddenly, I got a huge phone bill because of that problem!! So, e-mails are downloaded manually now until I fix the problem!!
You can find the answer here:
http://forum.xda-developers.com/showpost.php?p=2615010&postcount=10
Newer Windows Live always tries to connect using your default Internet Connection even when you are already online. To solve this, you need to go to:
Start->Settings->Connections->Advanced->Select Networks. Change everything to My Work Network.
With this, Windows Live won't try to connect when you have active internet connection. The problem now is, if you have no active internet connection, it will force your device to connect to your gprs/3g but will fail to work. You will need to reset the setting above to your gprs/3g connection.
yes but
Yes but chaning preferences for my network would result in not having my mms working, or gprs when I need it?
However, I have to go back to settings and change everything again to get things to work!!!! I would rather have a solution than a workaround
not working
programatix said:
Newer Windows Live always tries to connect using your default Internet Connection even when you are already online. To solve this, you need to go to:
Start->Settings->Connections->Advanced->Select Networks. Change everything to My Work Network.
With this, Windows Live won't try to connect when you have active internet connection. The problem now is, if you have no active internet connection, it will force your device to connect to your gprs/3g but will fail to work. You will need to reset the setting above to your gprs/3g connection.
Click to expand...
Click to collapse
I tried your solution but the phone tries to connect using MMS connection and of course windows live mail fails to download emails even though my wifi is on and connected!! It just ignores the wifi??
nodata by Paul @ MoDaCo
nodata
iRiKi said:
nodata by Paul @ MoDaCo
Click to expand...
Click to collapse
Have you tried NoDATA with HTC Diamond with WM6.1?? NoData seems to be an old cab file for older versions of WM?
hi
recently i bought hd7, but my gprs internet connection wont work sometimes, what should i do ?
i have tried different settings, but it didnt help. sometimes it connects , but most of the time it doesnt connect !
Did you turn on the roaming option under the celluar settings? It might be on the "Don't roam" option, so it actually stops the data connection once you enter a roaming area.
thnx it seems working now
marSoul said:
thnx it seems working now
Click to expand...
Click to collapse
You are most welcome ham vatan
are you persian ?
by the way, it seems when i connect my device with usb to pc, the internet is become slow on mobile, i mean the internet that shared with pc
after changing the roaming settings, again sometimes it doesnt connect
how can i make gprs setting for htc hd7???
how did u set your GPRS?
Go to settings, cellular and add apn
my gps is not working on my htc hd 7
hi
when enter the maps on htc hd 7 and select locate me it do nothing can any one help