Database Develop

windows live connection

is the Windowns Live Connect only through Data Connection ( GPRS , 3G,...) OR We can use the Wifi instead as it will be cheaper
thanks

emad.ibrahim said:
is the Windowns Live Connect only through Data Connection ( GPRS , 3G,...) OR We can use the Wifi instead as it will be cheaper
thanks
Click to expand...
Click to collapse
Windows Live works just fine on wifi too.

every time I try to connect it must connect through data connection and can not connect through the wifi could you please help
BR

Dear Sir TaurusBullba
I need your help as you are now online , I post anopther issue today :
I need your help as I installed the Cab "dutythroy_black-3g-comm-manager_.cab, and after uninstalling this CAB I found that the "3G" Notification in the status bar beside the network signal is became only the sign "G" ; is there is anyway to return the sign "3G" back I tried the Hard reset but it is the same
the 2nd issue the Windows live connection as when I started to setup my hotmail account in it it connect direct to Data Connection and when I disable it to connect to My Wifi Connection , it takes along time and it says that i am out of data connection and I have to go to the Data Connection again to work fine
sorry for intruption but this 2 issues I need to solve with your help please

emad.ibrahim said:
every time I try to connect it must connect through data connection and can not connect through the wifi could you please help
BR
Click to expand...
Click to collapse
Live tries to connect via 3g/gprs by default, just connect wifi, then sign in to live - as soon as gprs connection starts, hit cancel.
It will be fine.

unwired4 said:
Live tries to connect via 3g/gprs by default, just connect wifi, then sign in to live - as soon as gprs connection starts, hit cancel.
It will be fine.
Click to expand...
Click to collapse
thanks for your reply, do you have answer for the 3G Signal that dissapeared and instead of it it only "G" after i unidtall the comm cab as I explained in the previous post
and for the Windows live I tried this morning the updated version and uninstall it and make a hard reset , is that may be the reason for all this mass

Wifi and 3G

Hi
I just finished setting up Wifi and it works perfect. Is there any way i can make the Diamond use the Wifi connection for programs if such connection exist? Currently it alwasy open a 3G connection even if Wifi is enabled, which kinda sucks, since 3G traffic dont come cheap
So what i want is, if Wifi connection exist use that, else open a 3G connection.
Best regards
Mads

Yes, there is a way. Just go to settings-->connectins tab-->connections-->advanced tab-->select networks and select the one you want to use.
In WIFI settings you have to select the same connection at the "connect to" option!
regards

Hi demacus
Thanks for the reply, but I have some trouble following you guide. First in my Select networks I have to networks, “3” and “Arbejde”. 3 is the name of my ISP and the one that’s currently selected to be used by programs needing access to the internet. In my Wifi “Connect To” option I can’t select the “3” I can only select between “Arbejde” and “Internet” which is just to default networks.
So my question is still the same, how do I make the diamond use a wifi connection if one is present else enable a 3G connection and use that.
Best regards
Mads

Err... in my case, the way it works is.. if I connect to the Wifi, then 3g gets disabled for as long as I am connected to a Wifi network..

If Wifi is available and you ARE CONNECTED (just available isn't good enough, you have to be connected), my Touch Diamond doesn't use the 3G.

Soxiz said:
I can only select between “Arbejde” and “Internet” which is just to default networks.
Click to expand...
Click to collapse
Select Connect to The Internet

Hey L o r d R a j
The Internet option i am talking about have a description saying that its for use when connection to a VPN connection. My Wifi is active and if i change the setting in the Connection tab to use "Mit Arbejdsnetværk" the wifi works perfect for the browser etc.
Not sure what I or the danish rom i have is doing wrong. But i cant get it to use the wifi if its there, if not use the 3G.
If anyone have any ideas please let me know, thanks
Best regards
Mads

Please Please Please someone respond to wifi connection problems

hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before

What about DNS??

plasticplanet said:
hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before
Click to expand...
Click to collapse
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.

ref clutter
jmermel said:
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.
Click to expand...
Click to collapse
i would but seems like no one has bothered to help out in other threads either

are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...

yep
TML1504 said:
are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...
Click to expand...
Click to collapse
hello...yep..everything is entered correctly..as i say ive been setting them up for years..this one connects fine..have all the boxes ticked but cant actually use the internet..works fine on all my other wm units

Stupid question tbh but I see this sort of thing every day nearly..
Your subnet is the same as the router yes? Does dhcp allocate one out to you or have u got a static ip on the phone?
Despite being connected to the wifi access without being on the same network you will not gain net access.

Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.

ref
hotmail said:
Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.
Click to expand...
Click to collapse
hey..thank you for having little think about it..but im in the uk..t-mobile and those settings having nothing to do really with connecting to my wifi at home..except tell my phone it can..which i did..
all the settings are correct...exactly the same settings im using on other wm devices but when they say its connected i can actually do something..rather than on the diamond where it says its connected but doesnt allow me
ive set the phone up identical to another wm6 phone in every way..that connects fine and i can use my wifi ..this phone i cant

Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.

Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm

hey
marisa4755 said:
Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.
Click to expand...
Click to collapse
i have tried all except find someone else with a diamond..activesync connects fine and can connect when in sync..as ive said before i have another wm6 device..connects exactly the same way and works fine..this just wont..well connects but doesnt allow me to go any further

yahoooooo or wifiiiiiiiiiiiiiiiiiiiiiiii
BottchDK said:
Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm
Click to expand...
Click to collapse
well thank you guys very very much...ive used a combination of BottchDK and marisa4755
i removed my wifi connection and forced it to connect from default again..entered my passkey..wacked the old wifi on full power and NOW HAVE WIFI
it does seem devilishly slow though..but think ive read that on some thread before..think will have a looksy about that...
MANY MANY thanks again

Excellent news!

oh no it wasnt actually wifi !!!!!
marisa4755 said:
Excellent news!
Click to expand...
Click to collapse
hey all..sorry but the problem still exists !!!
cant connect..looking at lan settings..
status - Associated to network
it shows connected but status only associated..please tell me when the smeg is going on with this darn diamond before i through it against the wall !!!

This was the solution for me
I have had the same problem Imy phone even should be picked up by the repair centre then as a last try someone gave me the idea to change the leaver at wireless lan/energymodus to the left (best conection) and whala, I have tried it later whit my phone almost on the wirelesspoint to set it to best batterymode but not even at the middle it would do anything, it says conected but no data is comming to the phone, just when the leaver is at his almost left it will work.
Good luck.
Willem

-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?

yep tried all
Mr.Eliot said:
-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?
Click to expand...
Click to collapse
hello again..yes tried hard reset..have the power set to max..clicked my heals together 3 times also !!!
never in my life have i had such i problem..must have had dozen wm based phones which none of them i had this problem..still have wm2003 unit..wm5 and 6 unit all of which will connect just fine..i dont have the mac filter setup on my router
(

-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.

ive checked
Mr.Eliot said:
-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.
Click to expand...
Click to collapse
yep gprs works fine..looking in the wifi i have all the mac address ip speeds blah blah you could ever wish wish for..just as you would expect if it was connected..which it says it it..but only associated lol

3G/GPRS instead of Wifi/Wlan

Hello,
I have an problem. When i'm connected to Wifi and launch Opera, weather update or anything else which uses internet. The diamond makes connection with the 3G/GPRS network. The wifi is being ignored or something.
I thougt that i had seen this problem before on this forum, but i searched and can't find it anymore.
Does anybody know an solution or knows where i can find one?
Grtz

You can set network priority up somewhere, i'd be of more help but i don't remember where this is in settings

I have also been looking for a solution to set network priority as wlan first but cant find where to..
ident

I've been reading this site a fair old bit recently! First time i've been influenced to post though. I'd also love a solution to this. Does anyone know how to change priority settings? I swear i'd turned GPRS off, but whenever I check the weather or internet, it connects, sometimes even when I have a wi-fi connection active.
I wish to only use my Diamond with the wi-fi, don't want to get raped on the data charges. Any help would be greatly appreciated Thanks.

Hesky87 said:
I've been reading this site a fair old bit recently! First time i've been influenced to post though. I'd also love a solution to this. Does anyone know how to change priority settings? I swear i'd turned GPRS off, but whenever I check the weather or internet, it connects, sometimes even when I have a wi-fi connection active.
I wish to only use my Diamond with the wi-fi, don't want to get raped on the data charges. Any help would be greatly appreciated Thanks.
Click to expand...
Click to collapse
That's the exact issue i have! Its bloody anoying!

how about using NoData or from Advance configuration utilities in comm manager actually disabling all other connections ? i've been confronted with the same problem many times and rather use the available Wi-Fi over the mobile internet connections, so that helped me

That's not good enough for me. I have a databundle so when i'm not at home i wanna use that internet. But when i'm at home i want wifi!

I think i found the problem. When you make a connection with a wifi network you can choose between "internet" and "work". When you choose internet there's nothing wrong. When you choose work it doesn't make some kind of internet connection so programs fall back to the gprs.

I'm having the same problems. I'm having a data subscription so don't want to disable it in total. What I tried was go to wifi settings --> network adapters. Selected internet from the drop down box on top (work was default for me). But Opera still connects through 3G or G. What settings did you change exactly Rik_X?

The settings that i changed is when you make a new wifi connection it asks if you want to connect as 'internet' or 'work'. You have to choose work.
With wifi networks allready configured you have to do the following:
Go to comm manager --> turn on WLAN and let it connect to the network --> then push settings --> Wireless LAN. Then go to Networkcards (in dutch its netwerkkaarten) (its under the SSID)
Then click on the connected network and change work into internet. Accept the setting and with a reconnect its works (for me)
Good luck

Rik_X said:
The settings that i changed is when you make a new wifi connection it asks if you want to connect as 'internet' or 'work'. You have to choose work.
With wifi networks allready configured you have to do the following:
Go to comm manager --> turn on WLAN and let it connect to the network --> then push settings --> Wireless LAN. Then go to Networkcards (in dutch its netwerkkaarten) (its under the SSID)
Then click on the connected network and change work into internet. Accept the setting and with a reconnect its works (for me)
Good luck
Click to expand...
Click to collapse
Dank je! This worked for me.

Moderators are working with the same

[Q] WIFI again

Hi,
again a WIFI trouble:
If i connect to my router the connection is fine. All IP´s are correct and so on ... I cant establish a internet connection :-(
But i can open my router from the mobile
And: I can open the IP address from google and open all pages in a google search, no problem ....
Another tab in opera didnt let me go in the Internet at all. A normal address is not working too. All other internet app´s like Market and so on are not working ....
I am stuipd or the mobile ?!?!?
Heeeeelp please !!!

It seems there some sort of trouble with the DNS... have you tried to access a page with IP adress: http://207.171.160.0 - should be amazon.com
You can check your wifi status with *#*#4636#*#*
Kind regards,
ww

This sounds to me like it could be a problem with the router or with your internet connection itself. Other devices connected to the router can access the net normally?
I agree DNS may also be an issue.

........
I try to reach the amazon IP, it was not working :-(
Yes all other devices can work with router perfect ....
Then i check this wifi status and it is weird ....
In the wifi api, i did not open anything if i say enable network, getconfigured networks or getconnection informations,
If i say disconnect, it disconnect, but connect after few seconds automatically again.
If i say enable or disable network, it crash: processcom.android.setting has stopped ....
In the wifi status, it give me after refresh all corret datas, but a pig test to google is not working (host unreachable)
My phone is not cracked or anything like this. only KIES updated ....
:-(