Related
On the nokia's when in a call u can use dtmf which will dial a number in ur phonebook whilst on the phone... i've tried this on the xda but dont know where or how to do it.... can any1 tell me how i go about getting this done?
Thx in adv.
http://dialdtmf.sourceforge.net/
"dialDTMF a Pocket PC (Pocket Contact) plugin to dial telephone numbers using DTMF's (aka Dual Tone Multi-Frequency)"
s
I've always found that you can just dial numbers while you're in a call, you just use the... dialpad. :/
I had one contact which dials one of those 0870 numbers for cheaper international calls, someone pointed out to me that to get the phone to pause inbetween dialing a number, you could setup a Contact with commas to achieve a pause (I think each comma pauses the dialing for about a second)... So I have 0870234821,,001598238 (for example, the numbers aren't real numbers, but you get the idea).
I've always found that I can just dial on the keypad if I'm in a call though, you just dial and it dials the DTMF. Am I missing a trick here? I've not installed any other dialing software, I'm just using the supplied software, just with the default skin.
i know wot u mean.... but i'm contstantly having to dial numbers whilst in call, so it would be useful to have a tool that will allow you to do this rather than dummying number and having a pause for different dtmf's
shaice said:
http://dialdtmf.sourceforge.net/
"dialDTMF a Pocket PC (Pocket Contact) plugin to dial telephone numbers using DTMF's (aka Dual Tone Multi-Frequency)"
s
Click to expand...
Click to collapse
i've tried this software but whilst incall, it doesnt trigger off... am i doing something wrong.
I see what you mean...
... Here's a thought; how about recording some combos of DTMF tones to predefined wave files, and triggering them on the phone whilst you're in a call? There's a chance the phone might pick them up as they're being played, and relay them down the line... Just a thought for this morning, one I've not tried in practice yet, but it might work.
it is good to use.
i use short tone and delay time change to 50ms.
nice !
thanks a lot
Can't get dialDTMF to work. The tones are played when I go to contacts -> dialDTMF, but only when NOT in a call. If I'm in a call and try to use dialDTMF nothing happens after I pick either work/home/mobile number.
Or am I using this tool the wrong way?
Hi! I am looking for a call filter program that can filter all unwanted or no number incoming calls, I tried photo contacts pro but its slow & sometimes the caller can't hear anything for 1 to 2 seconds repeatly during the conversation. I also tried MagiCall, this program is simple & nice but it can't hang up the no number calls, instead it will pass these calls to my voice mail box directly. It has a option "pick up/hang up", this works what I want but will waste the air time. So anyone can suggest a call filter program to me that can directly hang up the no number calls? Thanks!
Call Firewall
thanks for your reply, I've seen the features of this program but it doesn't mention it can block no number call or not? Do you know it has this feature or not? Thanks!
uh, sorry, can't help you there. I only HAD this program in some of the ROMs I used, never actually USED it.
And auto-rejecting no-number calls would have killed it in my book anyway, because the phone central in my office randomly removes id from outgoing ones, and so I would never receive business calls, lol.
Ask around, or better yet, try searching the forum for impressions/reviews. I know Laurentius26 uses this app in some (if not all) of his ROMs.
[EDIT]
That's what I found in the description:
Features & Options:
a. Accecpt all calls - pretty self explainatory
b. Accept call from My Contacts only - accepts calls from contacts only, others are rejected
c. Reject all calls - pretty self explainatory
d. White List - accepts calls only from the white listed nos
e. Black List - accepts all call except from the black listed nos
f. Black List Pattern - any no STARTING from the black list pattern list is rejected.
for eg. if you enter "123", so all nos STARTING from "123" will be rejected
this is a very nice option with which you can block nos from any particular network, country, city , area or whatever you can think of.
Besides, there is a check window for "Reject unknown/private calls"... I'd call it a YES, then
CallBlock
I use callBlock from WISH solutions to block a list of callers. It works well and it does not have to answer and hang up.They mention that it can block no number calls but I have not tried it for that. Here is the link:
http://www.wishsolutions.com/products.html
Good luck!
Just tried the Call Firewall, it can block no number calls, but transfer the call to voice mail box directly. Anyway thanks for your suggestion
actually, this CallBlock looks like it offers a few ways of blocking the call... See picture at this address
Block method: dropdown list... Wonder what's in there? researchermd, can you check and let us know?
call firewall works just fine. I use it to block unknown or private numbers.
In addition, you can use your network settings for call barring and block numbers that aren't in your phonebook if you want the extra security of blocking numbers.
The screen you provided should be "CallBlock Ringtone Edition" which is make for palm. For the PPC version, there has no such option can be found
can somebody please tell me how can I send DTMF tones during a call? I searched in everywhere, but couldn't find any clear answers. do I need to install another application?
thanks for ur answers guys..
(HTC Diamond, wm6.1)
as i understand dtmf is enabled by default. i use it all the time with my phonebank.
yes it is enabled in my phone too, but there is no option to send DTMF tones. I am not talking about hearing those tones while dialling a number. what I mean is I made a phone call and connected, and then I want to send a number from my contacts. this is very practical when using the calling cards.
thanks
Press the keypad soft key(left) to bring the phone keypad.
I know it's not "hearing" the tones, as I said I use them to get access to my bank via the phone and that naturally involves quite a few numbers to be received by the other end. And this is carried out rather silently. Unfortunatly I haven't seen a "send number with DTMF" option. Maybe you indeed have to get an extra app to get that to work. The only place i've ever seen an option to even choose DTMF being enabled whatsoever is in schap's advanced config. I can vaguely recall such an option on an old Nokia pone. Sorry though for not being able to help.
ok, thanks for your comments. I appreciate if anyone lets us know if finds such a program.
I use DTMF tones to navigate in my voicemail and everything works fine here.
First of all, I am really liking the Fuze. Adding tweaks all over the place.
The only thing I miss from my Treo is the one touch button that allowed me to call my voice mail (cell and/or work) with the various keystrokes already programmed in, making dialing, deleting messages, etc. a lot easier.
Any options here?
thanks,
George
Just hold down the 1 key on the dialer
Or, if you run phoneAlarm, you can set your voicemail number in the VM dialer option so the phone will ask you if you want to dial voicemail when you touch the voicemail alarm icon.
Use Case:
1. Call a conference call number eg: WebEx
2. You are asked to enter the meeting number
3. You press the numbers but no tones are played
Had a tech support call with Samsung just now.
Firstly they say this isn't a feature on EU Note 8s (WTF!)
Then say it should work out of the box and my phone is faulty so take it to a Samsung centre for evaluation / exchange
I reckon this is a software bug. Can someone else in the EU dial any number and when you're connected to the call, press a number on the dial pad and tell me if you hear the tone played?
Im not in EU, but in the states it works fine, i have many conference calls daily and it always works for me entering my codes to get into the call. It should be working fine on your model as well, possible a issue with the carrier side of things or its turned off in the hidden settings.
Edit:
Try ##DATA#, if it brings up a menu, put in 000000 as your msl, then go to More, then go to DTMF SET. See if its off or not set at all? US model has a option here for this at least.
Hi
The ##2832# doesn't work on my phone. It's a real pig seeing as I work remotely!
Don't even seem to be able to use a 3rd party DTMF tone generator either (well I can but the system at the other end isn't hearing the tones).
joebongo said:
Hi
The ##2832# doesn't work on my phone. It's a real pig seeing as I work remotely!
Don't even seem to be able to use a 3rd party DTMF tone generator either (well I can but the system at the other end isn't hearing the tones).
Click to expand...
Click to collapse
I have a Galaxy N950N and I have this same issue. Did you ever get this working? I can't seem to find a secret service menu to enable it, and I know I'm doing something wrong here.
Hi
Not specifically a fix but the only place I'm having issues with is WebEx. If you try your voicemail, does that work ok? Mine is fine but for some reason WebEx isn't
joebongo said:
Hi
Not specifically a fix but the only place I'm having issues with is WebEx. If you try your voicemail, does that work ok? Mine is fine but for some reason WebEx isn't
Click to expand...
Click to collapse
Mine doesn't work across the board, irrespective of voicemail or other conference call. No dial tone is played in-call when you press the dial pad.
ajm786 said:
Mine doesn't work across the board, irrespective of voicemail or other conference call. No dial tone is played in-call when you press the dial pad.
Click to expand...
Click to collapse
Figured it out. It's the CSC. Apparently, it doesn't work properly with the N950N (at the least the one I had installed, which was default with the Renovate ROM). I had to use the Flashable CSC Selection V1.2.5 from Tkkg1994, manually add the greatlte line into it, and once flashed, I got all the options in the dialer for TTY (I think which relates to DTMF), and most importantly, sound feedback when pressing the dialpad while in-call.
Solution
Go to settings -> sound and vibration -> uncheck the the dialling keypad tones(if checked).
Hope this helps!
this works. Go figure... you disable the dialling keypad tones and you can now use the keypad tones. Thanks for the help. This has infuriated me for months
I had not payed any attention to this, as I used some services that require you to input numeric options during call, and all worked fine, but, yes, no tones heard, but the tones are sent anyway
What worked for me was dialing the original number manually - not from the phone memory or contacts!
I use a Gigaset HC450 Doorbell that is able to divert a call.
This is a rare device, check ebay, it is a DECT phone on a Siemens Gigaset IP Base Station with a SIP provider configured)
So if someone presses the doorbell button on the Gigaset HC450 and status is set to AWAY
then the configured SIP provider inside the BASE station does an external call to my mobile because I set up my mobile number inside the HC450 Menu for Diversion
So my mobile is a Samsung Note 8, at the moment i run Stock Hungarian unbranded firmware N950F
When there is a call from the doorbell, there is a sentence said by a female voice: "Doorbell is ringing, to connect press 1, to stop press hash"
I cannot proceed by pressing 1, neither with Dialpad tones activated nor deactivated, and also a 3rd party DTMF tone generator does not work
Someone in this thread said it was fixed by flashing different CSC, which i think is not true because many said that they got webex fixed by simpy DEACTIVATING dialpad tones
I am greatful for all ideas that you have in order to get this working, its a new challange and I found this thread so I posted my topic here, too
Thank you very much for reading