I have bought my tytn 2 last wensday and now I changed the sim and it wo'nt boot it only reboots also de red marks on the start screen are gone is there someone who nows wat it is? and what I can change?
I dont understand exactly what you mean...but try either changing the SIM back or hard reset the device.
thx for your replay i had to change my sim so i powered down my device changed the sim and start it. But it woudn't boot any more. When I push te power button the device goes on en reboot after the "smart mobility" screen. on this screen where red letters at te right bottem when I bought the device. De red letters are gone now :S
(excuse me for my bad english)
Is it a legal sim?
You can hard reset the device, by pushing a holding the two soft keys and resetting.
its a legal sim are there illigal sims then?
i have hard reset it twice but it doesn't work :S
Related
I was updating my htc p3600, but it crash down at 6% and now I can't turn on it what can i do???
(sorry for my bad english i'm italian)
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
tried this?
...
the problem is that i can't enter in the bootloader, my trinity stop at multicolor screen
hard reset trin100
I did the same. the only option was hard reset for my m700. I managed to find the correct keys to press. this will wipe it as good as new.
press two buttons above the green/red telephones together at the same time and put stylus into hole nr usb port for reset.
it will give you a system message.
ok that and then green talk button to fin9sh
So I tested the Tilt without a SIM card it booted up just fine and all, then I shut it down as per the enclosed instructions. I inserted the SIM card also as per instructions, and then the phone failed to turn on. So I was forced to soft reset the device (now after an hour of waiting) it is stuck at the AT&T screen. I tried a second reset about 10 minutes back and again stuck at the AT&T screen. Any idea whats wrong with the phone, I assumed that this should be a simple procedure of inserting the SIM, and restarting the phone. Since the enclosed instructions (with the phone) give me no answers, any idea what I should do now?
Thanks,
ERIC
make sure the sim is in, it won't hurt to charge it, and try a hard reset.
egandt said:
So I tested the Tilt without a SIM card it booted up just fine and all, then I shut it down as per the enclosed instructions. I inserted the SIM card also as per instructions, and then the phone failed to turn on. So I was forced to soft reset the device (now after an hour of waiting) it is stuck at the AT&T screen. I tried a second reset about 10 minutes back and again stuck at the AT&T screen. Any idea whats wrong with the phone, I assumed that this should be a simple procedure of inserting the SIM, and restarting the phone. Since the enclosed instructions (with the phone) give me no answers, any idea what I should do now?
Thanks,
ERIC
Click to expand...
Click to collapse
First of all is ATT your service provider? If not you'll have to unlock your phone before using.
For your issue...
Try taking out Sim card, and starting up your phone.
Once it starts, it's will load the setup wizard asking you to tap the screen: at this point do a hard reset (a hard reset is done by pushing the two soft keys (these keys are located to the left of the end button, and the right of the talk button with a "-" on them) at the same time and while holding these keys, push your stylus into the softreset hole and wait until your phone flashes and brings you to a white screen with instructions.
Follow the instructions on the screen.
After your phone resets, power down, reinsert your Sim card and it should be ok.
Post back with any Qs
ah! i was using the unlocking program from the forums to unlock my tilt. i got to the 2nd step. and then from the 2nd step when it was restarting it showed the att start up then the 3g start up then it stays on a black screeen. i took out the battery and tried again and same thing. it stays on the black screen. i even reset the phone and same thing! idk what to do!! please help!
cid or sim unlock?
If it is the sim unlocker, which I think you are using the second step is to check your radio. Therefore, this is occurring possibly because you installed hardspl. Try a hard reset then search this thread:
http://forum.xda-developers.com/showthread.php?t=334679
yes i was doing the sim unlock. idk how installed hardspl. (im farely new to the whole windows mobile deal)... i tried doing the hard reset but it does the same thing. (hard reset = green button, red button and power button all at same time?)
no that does not equal hard reset. Didn't we go over this with you already?
Hold down both soft keys and insert stylus. soft keys are the two keys that have horizontal lines or dash whatever you want to call it. So hold those two down then insert stylus. You will receiving a warning. When you receiving this warning hit the green button. Then you will receive a notification to hit the green button again (the send key).
i did the hard reset, windows mobile installed, and it went back to the black screen.
so now what?
Somekid said:
i did the hard reset, windows mobile installed, and it went back to the black screen.
so now what?
Click to expand...
Click to collapse
I had the same problem u have to flash your original rom back to normal for evrything to go back, hard reset wont work.
Just stumbled on this thread as well so I thought i'd add a little information. I had this Exact same problem. Black screen after step 2. I went ahead and tried to do the 'unlock' of the phone even though i couldn't see anything. I dont know if it worked or not, but whatever. Did a reset, still black.
So I went ahead and flashed HardSPL 3.29, still black as I expected.
I THEN installed a WM 6.1 cooked rom that requested said HardSPL to be precise it was this one http://forum.xda-developers.com/showthread.php?t=416276
Anywho after flashing that rom, everything was good again, the screen worked as it should etc.
My guess was that the Hard SPL was screwing things up because my phone was still on the original ATT WM 6 rom.
Anywho, all is well. I hope this helps someone else down the road.
MF
Hi all.
I'm a bit concerned. All of a sudden the ability of my phone to fix itself by hard reset (L+R buttons > Power on) is gone. This is quite bad.
I can still perform a hard reset via the control panel (erase all data).
Anyone know what's wrong? After the last hard reset the phone wasn't like how it was to begin with at all - or how it was after any of the other hard resets. All of the SE customisation had gone, and only the first 4 panels were available.
How come hard reset isn't a dead cert, and why in the world has the hardware shortcut gone?
Thanks
Mine refused to do a hard reset using the power button + silver buttons, it kept complaining that there was "no image file".
For some reason, using the soft reset button instead of the power button seemed to work on mine, after using the soft reset button behind the battery cover with the two silver buttons it did a proper hard reset and it worked with no problems.
i did 2 hard resets on mine now and i had weird behavior too.
On the first hard reset i couldnt hard reset by pressing the two silver buttons and the power button, just nothing happened. I then tried to press the silver buttons and inserted the stylus into the hole on the back which worked.
As i did a hard reset for the second time method 2 didnt work anymore, therefor method 1 suddenly worked...very weird
mine, couldnt hard reset it by preseing L & R and then soft reset...
i did it by clearing storage in setting!
It happen to me too...I solved it this way
Assign the default to each button left and right and then try it again..
PD: to hard reset trhee botton togheter and then relaese first the power button and wait until screen turn white....
Sorry for bad english
i need help!
mine did the reset ok, but when connected to sony ericsson's ipdate service keeps flashing 'no image file' and the update service says device not recognised. any ideas how i can fix it?
I have a slightly different problem. x1 to cleanse his memory, I was enabled very strange program that was the code'1234 'and when I did it my X1 phone simply shuts down. When I start up back, I appeared on a white screen with a blue stripe on top, and in the middle of the screen wee dagger. I've tried all the ways to retrieve the telephone to life but nothing is party, and the Internet also can not find anything. Please help.
@ thomsonss1: try a hard reset. That should work. Report back if it doesn't and we'll think of something else
Noooo it's not working.... I even can't to put a pin code or mobile code....
it suck......
I am also having the "No Image File!" issue. Has anyone fixed their phone or am I SOL?
1.) I changed new rom
2.)It freezes when i was using youtube panel
3.)I turned off and when i turn on again wont load
4.) I tried hard reset , taking out the battery and memory card still wont load
5.) couldn't connect to pc
anyone know how to fix ?
well i had the same issue few moments ago. but now i get rid of it by using a very easy method.
- While the phone is off -hold down the front left and right buttons on the X1 and insert your stylus into the soft reset hole all at the same time.
- After i did this i was presented with a blue screen that told me to press R to reset and delete all my existing stuff. Then i had to callibrate the stylus and the same stuff the day you got it.
I tried that way too, after it said restart i pressed spacebar to restart and its still stuck at loading screen...
you press R... not space
poetryrocksalot said:
you press R... not space
Click to expand...
Click to collapse
R to hard reset, SPACE to restart.
If the phone has finished its hard reset (it's telling you to press SPACE) and you can't just remove the battery and turn the phone on. Maybe your keyboard is dirty and it's not reading the SPA.CEBAR presses
OT: hey poetry, where'd you been? did you sell your X1?
Sorry for my bad english , but it did restarted after pressing the spacebar but it still freezes for some reason and ive done like 5`6 hard reseting it ;/
harveydent said:
R to hard reset, SPACE to restart.
If the phone has finished its hard reset (it's telling you to press SPACE) and you can't just remove the battery and turn the phone on. Maybe your keyboard is dirty and it's not reading the SPA.CEBAR presses
OT: hey poetry, where'd you been? did you sell your X1?
Click to expand...
Click to collapse
yes I sold my X1. I wanted to try out the Nokia E90, and my X1 was in such a bad shape that I had to sell it before it lost value.
i know this is old post, but i have that problem now, any solution.
i changed my rom 20x till now but now stack on XPERIA logo, soft reset hard reset not working, any help....
solved. entered boot loader, three color screen, run task 29 utility 8-12 times, every time connected disconnected usb cable, removed inserted battery and then suddenly update progres was shown on phone. huh. flashing my X1 was easy till today. Good luck to all...