Database Develop

please help!!! my qtek 9100 stucked on bootloader screen!!

Hy guys...i have a problem, my device stucked in bootloader mode..can someone help me? please, IPL 2.18, SPL 2.18

soft reset

i tried to install another rom, but on 98% stucked...can i put wm6?

come on... help yourself, have you cid unlocked? what was the error message?...

so, i tried now to install a wm5 version, and on PC it's showing 99% and i'm still waiting about 1h, and on phone 98%

i repeat
bbobeckyj said:
have you cid unlocked? what was the error message?...
Click to expand...
Click to collapse

i read "how to cid unlock" but it is written there to copy a file on ppc memory, but i can't enter on it, only in bootloader mode

ok, you need to flash the rom that the device came with ( o2, cingular, vodaphone, tmo etc) then cid unlock

i understood that..but i don't know what rom do i need, because i have brought at second hand, from a guy, and it was in french, and i tried to install in english, but stucked on 98%

you'll have to try each french rom until one works
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
i can only see 2 french roms on the wiki, both are qtek, is that what your wizard is branded as?
also try the 'button rom' and then cid unlock
it's past my bedtime now, i'll check this in the morning. but short of holding your hand and giving a button by button tutorial, you know everything there is to know

yes it is qtek...thank you very much, i will see what i can do..i will let you know about the results

i can't download the files, because was deleted

it worked..thanks, without cid unlock, but thank you anyway for you time

now, you must cid unlock before flashing another rom

i tried to do that, and when i want to downgrade to button's 1.05 ROM it's getting stucked on 98%

now..i've made it again...i have wm5 on it..i made cid unlock, but my problem is that every time i try to install wm6 on it, it appears to me wm5...why? with each version

OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.

http://forum.xda-developers.com/showthread.php?t=306501

JoelC said:
OK... two things - firstly, have you gone through ALL the steps in the stickied G3 unlocking thread? You mustn't miss any out, no matter how long it takes.
Secondly, what operating system is on the PC you're trying to unlock from?
One more thing - when your device starts from a soft reset, please write down and post the IPL and SPL numbers that appear on the first boot screen.
Click to expand...
Click to collapse
which are the steps? please give it to me a link...i wrote in the first post the ipl and spl

you can type, so you must be able to read, yes?
we've both given you the link more than once AND it is in my signature in all of my posts. what more can you want?

Hey guys...1.5 ROM?

Sorry for asking but ive checked the search and i cant seem to find it. Im looking for the original ROM 1.5 i think it was for the wizard...my phone wont do anything but go to the bootloader screen even after ive flashed it to 2.6 so im thinking i need to do the original ROM...anyways does anyone know where i can find it and download it? thanks for any help guys

oh i flashed it to what i think was 2.0...still the same bootloader problem but now it says IPL 1.01 and SPL 1.01...but still stuck at the bootlader screen...

Flash button rom:
http://forum.xda-developers.com/showthread.php?t=298613

i did that and now its still stuck at the bootloader screen with IPL 2.26 and SPL 2.26...somethings not right about my cell phone or something...any other ideas anybody?

XxShibbyxX said:
i did that and now its still stuck at the bootloader screen with IPL 2.26 and SPL 2.26...somethings not right about my cell phone or something...any other ideas anybody?
Click to expand...
Click to collapse
Have you read and followed this and the steps it points you to?
http://forum.xda-developers.com/showthread.php?t=298613
I assume you have a G3 since you are flashing these other roms, and based on the IPL/SPL numbers you are giving. You need to give us specifics of what you have done, what happened at each step and where you are at now. Details are a good thing, as its hard to diagnose with just bits of the information. At one point you say 2.6 (no idea what that is) then you say you are stuck at 1.01, and now you say 2.26. So please tell us (in gory detail!) what all you have done...
If you follow all the steps in the thread above you will get CID Unlocked, but at the point where you are now, you need to flash YOUR PROVIDER's original rom to get back to a known state. Then try doing the CID Unlock.

alright i was using molskis 3.0 and for some reason sometimes my phone would not dial or connect so i restart it once every few days...well i did a simple restart and when my phone turned back on it was on the bootloader screen with IPL and SPL of 2.26...i figured i would have to flash the rom again or go to an earlier one...so i get home and try to flash molskis 3.0 again...right after it finishes and restarts itself it comes up with the bootloader screen again...now at this point im thinking i might have to do an earlier one like the original t-mobile rom and so i tried that...same problem stuck at the bootloader screen but with IPL and SPL of 1.01...so i post and then vippie tells me to download the button rom...i try that and no luck still the same problem and i followed those steps exactly and no luck...so now my phones just sitting on my nightstand charging with a bootloader screen and nothing else and the IPL and SPL says 2.26...could it be internal damage or what? i like my phone and dont wanna have to spend the money on a new one but at this point im thinking i might have to...thanks mfrazzz for offering your help...i know i seem like a noob and i really suck at punctuation but im not stupid so anything you guys tell me to do in detail i will be able to try

I don't follow you anymore.... you got IPL/SPL 1.01 and tried to flash button rom, after this your IPL/SPL is 2.26? Impossible....
Sometimes it won't go past bootloader no matter what you do... do this to revive:
http://forum.xda-developers.com/showthread.php?t=276963

Splash Screen?

Hello i have a 8125 and i have upgraded it and everything but now when i turn it on i have the T-mobile Splash screen is there any easy way to change it???

Have a look here:
http://forum.xda-developers.com/showpost.php?p=1557661&postcount=82
if above link does not work out for you try with these threads (same sub-forum):
1. HOW can i CHANGE THE MAIN BOOT SCREEN (ipl/spl SCREEN) WITHOUT REINSTALLING rom?
2. Badbert's Custom WIZARD BootScreen Store!!

Huckleberry88 said:
Have a look here:
http://forum.xda-developers.com/showpost.php?p=1557661&postcount=82
if above link does not work out for you try with these threads (same sub-forum):
1. HOW can i CHANGE THE MAIN BOOT SCREEN (ipl/spl SCREEN) WITHOUT REINSTALLING rom?
2. Badbert's Custom WIZARD BootScreen Store!!
Click to expand...
Click to collapse
Huckleberry88
That's the exact way,LOL,LOL
Btw,did you notice this in particular,he says 'Hello i have a 8125 and i have upgraded it and everything but now when i turn it on i have the T-mobile Splash screen is there any easy way to change it???' WHAT has he upgraded to a "WM5 T-Mobile 2.26 Stock Rom" ? Plz,PLz,somebody on this forum explain to this guy !!!

zabardast_1 said:
Huckleberry88
That's the exact way,LOL,LOL
Btw,did you notice this in particular,he says 'Hello i have a 8125 and i have upgraded it and everything but now when i turn it on i have the T-mobile Splash screen is there any easy way to change it???' WHAT has he upgraded to a "WM5 T-Mobile 2.26 Stock Rom" ? Plz,PLz,somebody on this forum explain to this guy !!!
Click to expand...
Click to collapse
I have done this http://forum.xda-developers.com/showthread.php?t=305225 so now i am stuck with it

LlamaLord said:
I have done this [COLOR="Red"]http://forum.xda-developers.com/showthread.php?t=305225 [/COLOR]so now i am stuck with it
Click to expand...
Click to collapse
ALRIGHT,
Let me finish this once and for all,you say as per your posts that you have upgraded to wm6 and even boost in your signature by posting info 'SIM/CID unlocked' and wm6 Rom upgrade 'NBD TouchFLO V9.2' and than start threads asking how to remove the splash screen of T-mobile at start up ? and posted in different threads regarding this.
Well,let me tell you,THAT YOU HAVE NOT ,I repeat,YOU HAVE NOT upgraded to any wm6 Rom up till now,what in fact you have been able to accomplish till now is that,you have flashed a wm5 Official Rom T-Mobile 2.26 over an already existing wm5 official Cingular Rom.I don't know if you have actually followed the guide correctly and the procedure and got your phone actually cid unlocked or not as per the method described in the above thread.
To verify the present status of you phone download the WST tool and post here the report generated by it,but keep in mind to post both reports a)Device Info b) CID locked/unlocked info,hitting the button on the wst tool with cid action written on it,only than it can be verified if your device is actually cid unlocked or not.
Otherwise,read and reread the guide at the below link to fully understand the method of cid unlocking and upgrading,OR,take my honest advise,if still you don't understand it,PLZ Forget about all this unlocking and upgrading,otherwise I'm sure you'll 'BRICK' your device and blame other's.Cuz you don't know the heck of unlocking and upgrading till now,just do yourself and on this forum a favour, 'STOP SPAM' by posting and starting threads .
http://forum.xda-developers.com/showthread.php?t=285435

IPL and SPL that don't match

I started a new thread so that people wouldn't have to read through my trials but long story short I have a G3 wizard and I'm trying to flash it. Followed all of the steps in the guide by vippie. I used the button rom to start with but mine was one of the many that stopped at 98% and gave me error 302 so I ended up using the XDA mini rom as the alternative that was suggested.
Now I've flashed my phone three times with the same rom to try and get the IPL and SPL the same but to no avail. The IPL and SPL are 1.05 and 2.25 respectively. Any help would be greatly appreciated.

hey i flashed my tmobile mda to a chinese rom too and then it changed spl to a diff version than the ipl and then i tried to flashed it with love rom and still it doesnt change the ipl and spl to the same version that i had before, then i removed the battery then my phone does not charge or turn on anymore, i have a g4 by the way, i m not sure if i bricked it or not

joco2560 said:
hey i flashed my tmobile mda to a chinese rom too and then it changed spl to a diff version than the ipl and then i tried to flashed it with love rom and still it doesnt change the ipl and spl to the same version that i had before, then i removed the battery then my phone does not charge or turn on anymore, i have a g4 by the way, i m not sure if i bricked it or not
Click to expand...
Click to collapse
I think you may have been trying to offer your empathy for my particular situation but that's what we in the business call thread jacking. Start your own thread please. Thanks for the comments though.
I was thinking today I may give flashing the button rom another try. Any suggestions people?
And a bump for some professional help and good luck as well.

SharpieMarker said:
I think you may have been trying to offer your empathy for my particular situation but that's what we in the business call thread jacking. Start your own thread please. Thanks for the comments though.
I was thinking today I may give flashing the button rom another try. Any suggestions people?
And a bump for some professional help and good luck as well.
Click to expand...
Click to collapse
wow, basically the same problem just trying to let u no that other ppl r having the same problem and i thought my problem would've helped in some ways...thx for trying to be nice at the end but ur not. sry i forgot to metion that:" hey, SharpieMarker im having the same problem that ur having..."in my previous post

joco2560 said:
wow, basically the same problem just trying to let u no that other ppl r having the same problem and i thought my problem would've helped in some ways...thx for trying to be nice at the end but ur not. sry i forgot to metion that:" hey, SharpieMarker im having the same problem that ur having..."in my previous post
Click to expand...
Click to collapse
Well I apologize if I came of as a douche, I guess I didn't understand what you were saying exactly. I appreciate any support I can get with the issues I'm having so its good to know I'm not the only one. Thanks joco.

SharpieMarker said:
Now I've flashed my phone three times with the same rom to try and get the IPL and SPL the same but to no avail. The IPL and SPL are 1.05 and 2.25 respectively. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Surely you're not serious? oh Jesus, you are.
OK... SPL is separate from IPL, not only is it impossible to get them to be "the same version" it would also achieve nothing to actually do so either... so please, the procedure is very simple, you flash a patched SPL, you flash your crap on. Job Done... I thought there was already a patched SPL for G3... do I need to make one of those as well?!?

Olipro said:
Surely you're not serious? oh Jesus, you are.
OK... SPL is separate from IPL, not only is it impossible to get them to be "the same version" it would also achieve nothing to actually do so either... so please, the procedure is very simple, you flash a patched SPL, you flash your crap on. Job Done... I thought there was already a patched SPL for G3... do I need to make one of those as well?!?
Click to expand...
Click to collapse
Well that seems logical however I was misinformed. SO I've flashed this Xda_mini rom, then what is the cause of the issues I was having getting a connection error when trying to CID unlock? Wizards have to be CID unlocked before flashing 2.X roms right?

What started as a simple, objective thread, has become quite confusing in a matter of a few posts.
joco2560 said:
wow, basically the same problem just trying to let u no that other ppl r having the same problem and i thought my problem would've helped in some ways...thx for trying to be nice at the end but ur not. sry i forgot to metion that:" hey, SharpieMarker im having the same problem that ur having..."in my previous post
Click to expand...
Click to collapse
Well, in fact your problem ISN'T the same as SharpieMarker's because his phone is still alive...
I believe you tried to downgrade a G4 to 1.xx bootloader which only exist for G3. Once the battery came out your phone could never boot again. Say bye bye to it...
SharpieMarker said:
Well that seems logical however I was misinformed. SO I've flashed this Xda_mini rom, then what is the cause of the issues I was having getting a connection error when trying to CID unlock? Wizards have to be CID unlocked before flashing 2.X roms right?
Click to expand...
Click to collapse
A LOT of people are reporting failed downgrades which 'block' the SPL at 2.xx. Once there even after 30 flashes the SPL never lowers to 1.xx to allow CID unlocking.
No solution is known until now...
Olipro said:
Surely you're not serious? oh Jesus, you are.
OK... SPL is separate from IPL, not only is it impossible to get them to be "the same version" it would also achieve nothing to actually do so either... so please, the procedure is very simple, you flash a patched SPL, you flash your crap on. Job Done... I thought there was already a patched SPL for G3... do I need to make one of those as well?!?
Click to expand...
Click to collapse
There isn't and i believe you should patch one...
cheers

mestrini said:
A LOT of people are reporting failed downgrades which 'block' the SPL at 2.xx. Once there even after 30 flashes the SPL never lowers to 1.xx to allow CID unlocking.
No solution is known until now...
Click to expand...
Click to collapse
So what is the solution or is it the patched SPL that Olipro is referring to?

The HardSPL (Olipro) is ONLY for use with G4. The flash program should keep you from flashing it to a G3 Wizard because their SPL code are not compatible.
SoftSPL also doesn't work for G3 wizard.
joco2560 should be produced a brick because as I know, no unofficial Chinese ROMs are equipped with G4 IPL and SPL.

Man if only these guys would have read the WIKI... There is a link in my signature to an outstanding tutorial for newbies. Just read it and you will feel enlightened. Everything will seem so simple and life's purpose will become evident... Just Kidding but seriously guys... Read the damn WIKI... I'm tired of reading about bricks.
NOTE:: THIS ENTIRE POST IS ONE GIANT LINK TO THE WIKI I'M TALKING ABOUT!!!
READ IT!!!

starkwong said:
The HardSPL (Olipro) is ONLY for use with G4. The flash program should keep you from flashing it to a G3 Wizard because their SPL code are not compatible.
SoftSPL also doesn't work for G3 wizard.
joco2560 should be produced a brick because as I know, no unofficial Chinese ROMs are equipped with G4 IPL and SPL.
Click to expand...
Click to collapse
Alright, this is helpful and I was hoping there might be a few suggestions as to what to do at this point. Thanks guys for the comments.

dharvey4651 said:
Man if only these guys would have read the WIKI... There is a link in my signature to an outstanding tutorial for newbies. Just read it and you will feel enlightened. Everything will seem so simple and life's purpose will become evident... Just Kidding but seriously guys... Read the damn WIKI... I'm tired of reading about bricks.
NOTE:: THIS ENTIRE POST IS ONE GIANT LINK TO THE WIKI I'M TALKING ABOUT!!!
READ IT!!!
Click to expand...
Click to collapse
Okay, firstly I have not bricked my device. I have read all of the guides and walkthroughs before attempting anything on my wizard. Unfortunately your guide that you have written, just like the other ones, has not answered my question or told me what I should do (unless I have missed it somewhere which is possible).

Okay, after some finagling with the lokiwiz application I managed to unlock and then cid unlock my phone however the IPL is still 1.05 and the SPL is 2.25. Is that accurate or should the SPL be lower now? Do I need to reflash?
Alright, after re-re-re-re-re-reading the instructions I think I understand the bit about IPL and SPL. I think. Feel free to clarify though.

If lokiwiz does not show any errors during unlocking (NOTE That lokiwiz always shows successful regardless it is actually unlocked or not, so the error message is the most important), then either try to flash Button's ROM again and you will get 1.05 IPL and SPL (That's my way), and others suggests to upgrade IPL and SPL directly to 3.08.

starkwong said:
If lokiwiz does not show any errors during unlocking (NOTE That lokiwiz always shows successful regardless it is actually unlocked or not, so the error message is the most important), then either try to flash Button's ROM again and you will get 1.05 IPL and SPL (That's my way), and others suggests to upgrade IPL and SPL directly to 3.08.
Click to expand...
Click to collapse
There was no error message when I CID unlocked. It successfully unlocked both times (the first using the U command and after a restart using the C command). My phone restarted twice during the unlocking so I think it went just fine. So should I proceed with the flashing of the tmobile rom? After the unlocking I have an IPL of 1.05 and an SPL of 2.25.

You can always go back to Button's ROM, so it's OK to flash T-Mobile ROM.
However I still recommend to flash Button's ROM once more first.

starkwong said:
You can always go back to Button's ROM, so it's OK to flash T-Mobile ROM.
However I still recommend to flash Button's ROM once more first.
Click to expand...
Click to collapse
Well I decided to flash the t-mobile rom and it went smooth. Everything works fine. So now I have an IPL and SPL of 2.26 so I can flash some of the more interesting roms right? Thanks for all the help and advice guys. Much appreciated.

SharpieMarker said:
Well I decided to flash the t-mobile rom and it went smooth. Everything works fine. So now I have an IPL and SPL of 2.26 so I can flash some of the more interesting roms right? Thanks for all the help and advice guys. Much appreciated.
Click to expand...
Click to collapse
Yes you should now be CID unlocked and can flash any Rom you want as long as it does not contain an IPL/SPL.
And by the way, It does tell you in that WIKI exactly what you need to do to CID unlock your device. (The SPL will not downgrade to 1.05 unless you flash the button Rom again AFTER completing The Unlocking Process through lokiwiz. I wouldn't even reccomend flashing the button Rom again. It's pointless because Flashing the T-Mobile Rom is going to upgrade you IPL/SPL to a higher, matching pair and is going to give you a very strong, stable base rom to flash to a custom Rom From.

SharpieMarker said:
Well I decided to flash the t-mobile rom and it went smooth. Everything works fine. So now I have an IPL and SPL of 2.26 so I can flash some of the more interesting roms right? Thanks for all the help and advice guys. Much appreciated.
Click to expand...
Click to collapse
I think you should check your CID status with WST before trying to flash a custom ROM. Lokiwiz doesn't check for errors and proceeds as if everything went ok even if it didn't.
For all we know your phone might be originally from T-Mobile and even CID locked would always accept an official ROM.

AKU3 stuck

format is failed after a power outage in the middle of ugrading with shell tool.
made it worse bu trying to flash with tmobiles latest rom.
so now i'm stuck in boot screen with the following
Device is g3 with
IPL 3.08
SPL 3:08
GSM 02.69.11
OS 3.8.2.1
did i mention CID unlocked?
please advice

rephrase
Let me rephrase the question.
I have a friend who saw me use shell tool to upgrade my cid locked wizard.
He went home to try the same on his cid locked g3 wizard.
he had bad luck and it was interrupted mid way through so he brought me his dead wizard.(stuck on bootloader)
The only official rom i had was Tmobile's 3.08 so i flashed it to try and revive it.
it flashed and finished but still stuck on bootloader.
when i try and hard reset it says "format is failed".
button rom wont work, wizard love wont work, sd method wont work as it is cid locked.
Any ideas?
And if none, will imei-check work..

Get the official stock ROM for his Wizard, then flash it and you will get a working Wizard back.
However, if the IPL and SPL still stays at 3.08, there is possibility that IPL and SPL not downgradeable, so unlocking may not be possible.
Another thing...by CID unlocking the Wizard, there is no reason to use ShellTool while you can actually use RUU directly! Using ShellTool may lead to incomplete update!

Not yet home
Hey, the stock rom (tmobile 3.08) succesfully flashes but the wizard still doesnt boot. it gets stuck on the first screen.
Any more ideas?
BTW i'm very experimental so i'll try anything..

Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter

pd2903 said:
Hi,
Have you tried to flash the wizard with Hard-SPL or Soft-SPL.
I had the same with mine wizard (G4) but Hard-SPL worked for me.
You have a G3 so I don't no if it will work. Otherwise read this thread first post
Hope it will work.
Peter
Click to expand...
Click to collapse
Both solutions advised require WinCE to boot to be applied... which isn't the case here

hey
mestrini said:
Both solutions advised require WinCE to boot to be applied... which isn't the case here
Click to expand...
Click to collapse
So mestrini,
What to do??
will imei-check work?
And what exactly is format is failed?

Try this thread http://forum.xda-developers.com/showthread.php?t=298613
This worked for a friend of mine. he has a G3.
Peter