I noticed the following with my HTC TyTN II.
When I perform a soft-reset, and "logon" to my KPN provider, I can make outgoing phone calls. BUT I can't be called for about 15 minutes.
People who call me are redirected to my voice mail. After about 15 minutes they can call me.
I tried this with my Vodafone SIM card, but I could'n reproduce the problem with my Vodafone SIM, it happens only with my KPN SIM.
When I put my KPN SIM into my Samsung E900, I also don't have this problem. Anyone any ideas, what can be the problem?
I had this problem with Telfort on my old phone (I-Mate Jam) but a.t.m with HTC TyTN II I have no problem.
You could best contact KPN and request them to send your phone the phone settings for KPN. I requested mine from Telofrt and it worked al tho the TyTN II had automaticly installed the settings of Telfort.
xmoo said:
I had this problem with Telfort on my old phone (I-Mate Jam) but a.t.m with HTC TyTN II I have no problem.
You could best contact KPN and request them to send your phone the phone settings for KPN. I requested mine from Telofrt and it worked al tho the TyTN II had automaticly installed the settings of Telfort.
Click to expand...
Click to collapse
I've run the automatic connection setup, and set it up for KNP. After my latest hard reset I cancelled this setup. (I think this is what you mean?)
But did didn't solve the problem. Would it make a difference when I call KPN to receive the settings?
johanromijn said:
I've run the automatic connection setup, and set it up for KNP. After my latest hard reset I cancelled this setup. (I think this is what you mean?)
But did didn't solve the problem. Would it make a difference when I call KPN to receive the settings?
Click to expand...
Click to collapse
Hmz that could help. As I said it worked on my I-Mate Jam. But the funny thing is I bought my I-Mate Jam from Dubai and I-Mate has a english and a arabic ROM so I had the arabic one, that's why I needed the settings.
I bought my HTC Tytn II from dubai. But the ROM is english and it had the settings originaly.
So try it
xmoo said:
Hmz that could help. As I said it worked on my I-Mate Jam. But the funny thing is I bought my I-Mate Jam from Dubai and I-Mate has a english and a arabic ROM so I had the arabic one, that's why I needed the settings.
I bought my HTC Tytn II from dubai. But the ROM is english and it had the settings originaly.
So try it
Click to expand...
Click to collapse
I tried, but it didn't help. My settings for KPN are OK.
Related
Hello,
I went to my store to buy a Tytn II Fr (Azerty keyboard).
Luckily, they warned me there was a pb with some mobile operators. SFR (vodaphone) was said to be OK, but not Bouygues neither Orange.
The bug? everything works allright, you can place calls. But whenever you receive an incoming call, the phone reboots...
I went on the internet and found some posts telling the same.
The vendor told that HTC was freaking and that 10 HTC technicians came to try and find the reason. No luck this far.
They don't know if a ROM update would suffice.
I do wonder how a SIM can damage in such a way a device working great with the great majority of operators.
Anyone has a clue?
Have a good one.
seems right:
http://forum.xda-developers.com/showthread.php?t=330119
Mike
I was confused... I cannot dial out any phone number... only can receive..
I try to install my sim card in another handset, it is work.
who can help me?
thanks.
Need more information to help
What happens when you try to dial out (any messages given)? Have you run through the Connection setup (under settings) for your country and operator (I assume it's a TyTN II we're referring to since we're in the Kaiser forum)? More information about your phone/ppc, sim, country and network may help.
Hate to ask the obvious: did you try a soft reset?
Where I dial out, the phone will alert "Bi Bi Bi Bi". Of course Tytn II... What you mean by "Connection setup"? in my Connection session, I only can find Tasks and Advanced but not country and operator.
I using Orange UK.
And soft-reset many times.
thanks.
bwqipzbpd said:
Where I dial out, the phone will alert "Bi Bi Bi Bi".
thanks.
Click to expand...
Click to collapse
Had the same symptoms occasionally when connected to 3G on my P3600. Turned out it was a network problem. Network hardware was upgraded a couple of months later and no more problems since (P3600 and P4550).
Try disabling 3G, maybe it helps....
how can I do that...
bwqipzbpd said:
how can I do that...
Click to expand...
Click to collapse
Read the manual or (translating from a German device): Phone -> Menu -> Options -> Band -> network type : select GSM.
This may or may not help, but it´s worth a try.
Good luck!
I have followed your guideline but still not work...
And I cannot access to 3G, GPRS now... Crazy...
My mistake......you should of course select GSM - typo in above post.....
If it still doesn´t work, I´m afraid I´ve no more ideas
Opposite
I have quite the opposite problem on my elf - Outgoing calls are possible, but no incoming calls. This sim card works fine on another phone, but does not work on another touch. Other sim cards work fine.
Any ideas anyone ?
( I know it's the wrong forum, but am desperate .
michi123 said:
My mistake......you should of course select GSM - typo in above post.....
If it still doesn´t work, I´m afraid I´ve no more ideas
Click to expand...
Click to collapse
Cool man. It is work. But Do you know why I cannot set as Automatic? is that mean I cannot use 3G now???
Looks like it is indeed network specific. You might want to contact your provider and see if they are aware of any problems. As I said, my network did have the same issues occasionally and I believe Orange in France had some troubles as well about a year ago or so.....
bwqipzbpd said:
Where I dial out, the phone will alert "Bi Bi Bi Bi". Of course Tytn II... What you mean by "Connection setup"?
Click to expand...
Click to collapse
Well with my (HTC branded and non network customised) TyTN II, Connection Setup is the name of an icon in Settings, Connections Tab. It allows me to select the country and network and the program configures the rest.
I using Orange UK.
Click to expand...
Click to collapse
Ah that may explain it. If you have an Orange provided version of the TyTN II, they may have customised the options on your phone to remove that program/function. Connection Setup is explained in my manual immediately after the section on Comm Manager (pg 163). I'll be interested to hear what your network provider has to say about the problem.
Guys,
any idea how to change the SMS service center on Diamond???
when I try to send a SMS I get a message that the message cannot be sent and that I need to check my SMS Service center number.
When I put a different SIM card from the same provider it works normally. Also when I put a SIM card from a different provider everything works OK.
I have searched through Diamond forum and haven't find any relevant information.
However i did notice that people had issues with this one in some other WinMo phones.
I tried 2 ROMs and the same thing happens:
SwiftBL 6.0 and panosha Shine On 1.3
My SIM card works normally in other phones (Samsung etc.)
Any ideas on this one??
Soon I'm gonna start closing instead of moving threads!
Yes i have got the same problem since i have updated the phone to the new 1.93
Since then i turned the phone back to other ROM's but the problem stays.
It is the problem with the Telfort Provider en other providers will send it directly.
Strange problem.
But where is the problem? In the phone or with the provider?
mircha said:
Guys,
any idea how to change the SMS service center on Diamond???
when I try to send a SMS I get a message that the message cannot be sent and that I need to check my SMS Service center number.
When I put a different SIM card from the same provider it works normally. Also when I put a SIM card from a different provider everything works OK.
I have searched through Diamond forum and haven't find any relevant information.
However i did notice that people had issues with this one in some other WinMo phones.
I tried 2 ROMs and the same thing happens:
SwiftBL 6.0 and panosha Shine On 1.3
My SIM card works normally in other phones (Samsung etc.)
Any ideas on this one??
Click to expand...
Click to collapse
I had the same problem with 1.93.456_Radio v1.00.25.05
1. Turn back to only stock Radio version (may be Radio v1.00.25.03)
http://forum.xda-developers.com/showthread.php?t=407956
2. Or, change your sim card with a brand new one.
Both solved my problem...
mattijn1980 said:
Yes i have got the same problem since i have updated the phone to the new 1.93
Since then i turned the phone back to other ROM's but the problem stays.
It is the problem with the Telfort Provider en other providers will send it directly.
Strange problem.
But where is the problem? In the phone or with the provider?
Click to expand...
Click to collapse
I've got the same problem with a Telfort SIM here in Holland (after flashing from 1.37 stock to custom 1.93 ROM, not sure if it worked on stock). Couldn't find an easy way to change the SMSC myself. It proved hard for me to send an AT+CSCA command to the Diamond. And I haven't found software that uses SmsSetSMSC from the Windows Mobile Version 5.0 SDK. So I could write it myself, but first I'll ask if Telfort will let me try a new SIM and see if it'll send SMS, because I don't want to return to 1.37..
Definitely a new SIM, I don't want to stick to one ROM just because of that...
By the way, provider is Telenor Serbia
Mandragore said:
..but first I'll ask if Telfort will let me try a new SIM and see if it'll send SMS..
Click to expand...
Click to collapse
I'm back from the Telfort shop. Showed the girl behind the counter how I couldn't send SMS and change SMS settings. Swapped SIM's. She could send SMS with my SIM on her Nokia and I could send SMS with her SIM on my Diamond.. I'll get a new SIM for free, problem solved.
Hi Guys
Just got my new Tmobile Vario III. The problem is I cannot hear any conversation while making or receivng calls. Phone displays that I have connected, Dialling Etc. I do not know id that is due to sim unlock or manufacturer's fault. I have tried tmobile, o2 sims but no joy. The sim works fine on my original phone.
Do you think it is manufacturer's fault or just upgrading to wm6.1 will solve the issue?
regads
hello,
have you hardreset your device?
greetings
I have done hard reset twice but still no joy
regards
Hello,
Since a couple of days i have a T5388++ dual sim with WM6.5.
I have ROM c03.021.01 eng
So far I am satisfied, but there is one thing i cannot get to work.
My internet (Vodafone Live from the Netherlands) will not work.
I have tried the settings from the vodafone site, with and without proxy, but there is no connection.
I have selected the good sim.
I hope some one can help me with this.
There is a second thing:
In programs there were 2 icons for the SIM cards, where some settings could be made for sms mms and things like that.
I have only one icon now, but both sims work perfectly. Is this a known problem?
Thank you
Erik de Wit
I've got the same problem, with some of the rom's it seems impossible to connect to Vodafone Live. For example the NL Cheetah 3.5 rom.
With other roms it is possible to download the configuration for Vodafone business or Vodafone NL, with this one the option business disapears. (This only show up when you try to download te connection setting from the menu "Instellingen-Gegevensverbinding).
Is there anyone with a Vodafone business contract that can connect with Vodafone Live on a WM6.5 rom?
As far as I know, Diamond2 does not have dual SIM...
T5388++ looks like... another clone...
M0L said:
Is there anyone with a Vodafone business contract that can connect with Vodafone Live on a WM6.5 rom?
Click to expand...
Click to collapse
i can witch my own rom, but i use a topaz, not a clone (not really relevant, it has to be related to the rom, no to the model) and i add all VLive stuff from the original rom when i cook
Firmware 5388++?
Whity1977 said:
Hello,
Since a couple of days i have a T5388++ dual sim with WM6.5.
I have ROM c03.021.01 eng
....
Click to expand...
Click to collapse
Hello Erik,
I see you have the same phone like me and a newer firmware version. Can you verify the number because I have c03.020.01 eng which looks very simular? Do you know where to download the firmware?