T Mobile Vario III Cannot Head Anything In Call - Tilt, TyTN II, MDA Vario III General

Hi Guys
Just got my new Tmobile Vario III. The problem is I cannot hear any conversation while making or receivng calls. Phone displays that I have connected, Dialling Etc. I do not know id that is due to sim unlock or manufacturer's fault. I have tried tmobile, o2 sims but no joy. The sim works fine on my original phone.
Do you think it is manufacturer's fault or just upgrading to wm6.1 will solve the issue?
regads

hello,
have you hardreset your device?
greetings

I have done hard reset twice but still no joy
regards

Related

Major bug with french Bouygues Telecom

Hello,
I went to my store to buy a Tytn II Fr (Azerty keyboard).
Luckily, they warned me there was a pb with some mobile operators. SFR (vodaphone) was said to be OK, but not Bouygues neither Orange.
The bug? everything works allright, you can place calls. But whenever you receive an incoming call, the phone reboots...
I went on the internet and found some posts telling the same.
The vendor told that HTC was freaking and that 10 HTC technicians came to try and find the reason. No luck this far.
They don't know if a ROM update would suffice.
I do wonder how a SIM can damage in such a way a device working great with the great majority of operators.
Anyone has a clue?
Have a good one.
seems right:
http://forum.xda-developers.com/showthread.php?t=330119
Mike

TyTN II radio problem

I noticed the following with my HTC TyTN II.
When I perform a soft-reset, and "logon" to my KPN provider, I can make outgoing phone calls. BUT I can't be called for about 15 minutes.
People who call me are redirected to my voice mail. After about 15 minutes they can call me.
I tried this with my Vodafone SIM card, but I could'n reproduce the problem with my Vodafone SIM, it happens only with my KPN SIM.
When I put my KPN SIM into my Samsung E900, I also don't have this problem. Anyone any ideas, what can be the problem?
I had this problem with Telfort on my old phone (I-Mate Jam) but a.t.m with HTC TyTN II I have no problem.
You could best contact KPN and request them to send your phone the phone settings for KPN. I requested mine from Telofrt and it worked al tho the TyTN II had automaticly installed the settings of Telfort.
xmoo said:
I had this problem with Telfort on my old phone (I-Mate Jam) but a.t.m with HTC TyTN II I have no problem.
You could best contact KPN and request them to send your phone the phone settings for KPN. I requested mine from Telofrt and it worked al tho the TyTN II had automaticly installed the settings of Telfort.
Click to expand...
Click to collapse
I've run the automatic connection setup, and set it up for KNP. After my latest hard reset I cancelled this setup. (I think this is what you mean?)
But did didn't solve the problem. Would it make a difference when I call KPN to receive the settings?
johanromijn said:
I've run the automatic connection setup, and set it up for KNP. After my latest hard reset I cancelled this setup. (I think this is what you mean?)
But did didn't solve the problem. Would it make a difference when I call KPN to receive the settings?
Click to expand...
Click to collapse
Hmz that could help. As I said it worked on my I-Mate Jam. But the funny thing is I bought my I-Mate Jam from Dubai and I-Mate has a english and a arabic ROM so I had the arabic one, that's why I needed the settings.
I bought my HTC Tytn II from dubai. But the ROM is english and it had the settings originaly.
So try it
xmoo said:
Hmz that could help. As I said it worked on my I-Mate Jam. But the funny thing is I bought my I-Mate Jam from Dubai and I-Mate has a english and a arabic ROM so I had the arabic one, that's why I needed the settings.
I bought my HTC Tytn II from dubai. But the ROM is english and it had the settings originaly.
So try it
Click to expand...
Click to collapse
I tried, but it didn't help. My settings for KPN are OK.

MDA Vario III dead since it got unlocked

I have an MDA vario III - Tynt II
I did manage to unlock my phone eventually , however since I unlocked it I can't make or receive any calls. Anything that has to do with sound on my phone doesn't work, i.e. it doesn't ring if someone calls me , it only vibrates. I can't accept a call, the green button doesn't work when someone is calling me. also, when i make a call and I get through I can't hear the person on the other line and neither can he hear me.
Any suggestions?? I did try to soft and hard reset it but it doesnt rectify the problem. I've also tried to launch the bootloader.
I am worried that I might have made my warranty void now cos of this.
Is that true?
Any help will be appreciated.
Thank you !
Hi Andrew,
When you say you unlocked your phone, what exactly did you do? A SIM unlock I presume so you can use any networks SIM? If so how did you do it? (e.g. software, online, code through eBay?)
What ROM are you running? You can find this in Start>Settings>SystemDevice Information
Copy all the info from that screen including the Radio Version.
Cheers
Zippyioa
which sim unlocker did you use, and did you reflash your original radio rom after unlocking?
Thank you everyone. problem solved. i had to reflash my rom and the sound got restored.
My phone doesnt allow me to call after I used okiwiz
I used the okiwiz to unlock my phone but now i cant mak any calls
can any one help?

How to change SMS Service Centre? Can't send SMS!

Guys,
any idea how to change the SMS service center on Diamond???
when I try to send a SMS I get a message that the message cannot be sent and that I need to check my SMS Service center number.
When I put a different SIM card from the same provider it works normally. Also when I put a SIM card from a different provider everything works OK.
I have searched through Diamond forum and haven't find any relevant information.
However i did notice that people had issues with this one in some other WinMo phones.
I tried 2 ROMs and the same thing happens:
SwiftBL 6.0 and panosha Shine On 1.3
My SIM card works normally in other phones (Samsung etc.)
Any ideas on this one??
Soon I'm gonna start closing instead of moving threads!
Yes i have got the same problem since i have updated the phone to the new 1.93
Since then i turned the phone back to other ROM's but the problem stays.
It is the problem with the Telfort Provider en other providers will send it directly.
Strange problem.
But where is the problem? In the phone or with the provider?
mircha said:
Guys,
any idea how to change the SMS service center on Diamond???
when I try to send a SMS I get a message that the message cannot be sent and that I need to check my SMS Service center number.
When I put a different SIM card from the same provider it works normally. Also when I put a SIM card from a different provider everything works OK.
I have searched through Diamond forum and haven't find any relevant information.
However i did notice that people had issues with this one in some other WinMo phones.
I tried 2 ROMs and the same thing happens:
SwiftBL 6.0 and panosha Shine On 1.3
My SIM card works normally in other phones (Samsung etc.)
Any ideas on this one??
Click to expand...
Click to collapse
I had the same problem with 1.93.456_Radio v1.00.25.05
1. Turn back to only stock Radio version (may be Radio v1.00.25.03)
http://forum.xda-developers.com/showthread.php?t=407956
2. Or, change your sim card with a brand new one.
Both solved my problem...
mattijn1980 said:
Yes i have got the same problem since i have updated the phone to the new 1.93
Since then i turned the phone back to other ROM's but the problem stays.
It is the problem with the Telfort Provider en other providers will send it directly.
Strange problem.
But where is the problem? In the phone or with the provider?
Click to expand...
Click to collapse
I've got the same problem with a Telfort SIM here in Holland (after flashing from 1.37 stock to custom 1.93 ROM, not sure if it worked on stock). Couldn't find an easy way to change the SMSC myself. It proved hard for me to send an AT+CSCA command to the Diamond. And I haven't found software that uses SmsSetSMSC from the Windows Mobile Version 5.0 SDK. So I could write it myself, but first I'll ask if Telfort will let me try a new SIM and see if it'll send SMS, because I don't want to return to 1.37..
Definitely a new SIM, I don't want to stick to one ROM just because of that...
By the way, provider is Telenor Serbia
Mandragore said:
..but first I'll ask if Telfort will let me try a new SIM and see if it'll send SMS..
Click to expand...
Click to collapse
I'm back from the Telfort shop. Showed the girl behind the counter how I couldn't send SMS and change SMS settings. Swapped SIM's. She could send SMS with my SIM on her Nokia and I could send SMS with her SIM on my Diamond.. I'll get a new SIM for free, problem solved.

MDA Compact IV Sim Card Problem

Dear experts, developers, cookers and users..
I have a problem that is quiet strange and which I can't explain.
I bought a MDA Compact IV with a T-Mobile Netherlands subscription.
The phone is Simlock-free and currently I use AlphaZero V7 Rom with the .05 Radio.
The problem is that I can't use my original T-Mobile simcard, while all other cards (al least 5) I tried (including an older type of T-Mobile simcard) work in the phone. I already ordered a replacement card at T-Mobille Netherlands, and this new card also doesn't work in the phone.
The problems becomes stranger when I tell that the specific T-Mobile cards do work in multiple other phones. :S
What can cause this problem, can it be the ROM, Radio or SPL, how can I solve this problem? Thank you in advance.
Radio?
Could this problem be caused by the Radio or SPL or ROM? Is that a possibilty? In that case I'm going to try some flashing..
Solution
Nobody with a possible solution, something I can try?
Hi did you ever find a solution to this problem as ive been searching for days now and cant find a solution

Categories

Resources