Related
I tried installing the customizer program, it installed fine but when i went to go run it, says that the htc home plug in not installed, when it prompts me to install it I say ok then it errors out.
have you tried installing htc home seperately?
Have you installed SDK Certs .cab?
goodness, where to begin.
1) This is not a ROM DEVELOPMENT issue, and as such should be posted in the Kaiser General forum, or at the very least in the software forum.
2) You haven't told us what rom, or what version of home is installed on your phone.
3) For that matter you didn't even tell us which version of htc home customizer you're using.
4) Wherever you got the program from would have been a much better place to post this question, we don't need a lot of additional redundant threads in here.
Anyway, you get my point i'm sure. Please observe the forum policies and search, read, and THEN post in the appropriate thread.
I agree with post #2, this is a simple fix...just install a htc home cab again, and the error will disappear
Jeez, did you bother to read what the HHC program told you???
This is a very easy to figure out issue.
HHC is based on OLDER cab type plugins, that put the graphic files in a folder in \HTCHome.
Cooked in newer versions place ALL FILES IN WINDOWS.
So either manualy move the HHC downloaded files to \windows or reinstall a older cab file version.
Hello! I appreciate very much what this comunity does for all of the pocket pc owners out there. That being said, could someone please post a how-to on upgradin Opera 9.5 without upgrading the firmware, please? I've searched the forum but people seem not to want to answer to this question. Maybe it's an idiotic question.. When i try to upgrade mine it says that it cannot remive the previous version, and when i press yes on wanting to continue at the end it says installation not successful! Any help would be much appreciated. Thanks!
Hmm... Doesn't anyone know this? 75 people read this and no one? I find this very strange. I hoped that other people were having this question. Thank you!
If you just want to upgrade, uninstall the old version if you are able and install the latest cab or find an upgrade version. If you can't uninstall, just install the new version overtop of the old. If you install over top make sure you are launching the proper executable. You can check your version by going to help, about Opera, and look for your build version at the top.That's it!
Next time try doing a little more reading, the answer is out there!!!!!
To Upgrade the Stock Version of Opera on a Diamond
Hi. It's unusual that somebody hasn't posted these complete steps before. So here we go:
To upgrade the stock version of Opera on a Diamond without flashing a new ROM
1. Go to the Opera thread here. Don't bother trying to install the official (non-Diamond) beta of Opera as it's more trouble than it's worth. Use the official Diamond Opera betas in the link here. You also should not try to uninstall the Opera version you already have on your Diamond
2. Download the Diamond Opera version that you would like. Choose the Upgrade zip package, not the Full Install package
3. Open the downloaded zip file and extract the three files (Opera9.exe, OperaL.exe, OperaPreL.exe)
4. Transfer these to a folder on your Diamond. eg "New Build"
5. Make a backup of the original Opera9.exe, OperaL.exe and OperaPreL.exe that is in the Windows folder of your Diamond. This is in the event that the new Opera build doesn't work as expected and you want to go back to the previous version
6. Use Resco File Explorer or similar to copy and paste the three files from the "New Build" folder to the Windows folder on your device. This will overwrite the old Opera files with the new ones. You can't use the standard WM6 File Explorer to do this as it won't let you overwrite the old files
7. Reset
8. The new build of Opera is now installed. Before you do anything else, return to the Windows folder on your Diamond and locate the "ghost images" of the older Opera build that are left behind (these have filenames along the lines of Opera9.exe.$7 and OperaL.exe.$22 or similar; make sure you don't try to delete the newer Opera9.exe and OperaL.exe files!) Deleting these unnecessary "ghost images" will free up lots of space.
For the record, I'm currently using build 1938 of Opera (extracted from a newer Diamond ROM). I don't recommend using the newest 2128 build as it comes with lots of issues such as excessive boot time, problems loading TouchFlo 3D favourites, etc. I think this new build is only designed to work alongside a newer version of TouchFlo 3d. The 1938 build works great for me though. Very quick, no issues. Still waiting for them to improve the Favourites list in Opera itself; it's a shambles.
Hope that helps
Dave
thank you
Now this is what a call a very good walktrough! Thank you for your help! I installed the version you sugested and it works perfectly! I guess it's quite easy when you know what to do.
+1 Thank you for this clear explanation.
Ciao
Fred
Thanks for the brilliant guide, I tried a cab upgrade earlier and killed opera completely (had to restore my sprite backup from the morning).
I'll give this a go
THANK you for the VERY clear and well written set of instructions on this, I just got my Diamond (US Unlocked Version) today, and you saved me a lot of headaches!
i upgraded to opera 9.5.2745
just run the .cab and it was done without any problems...
but the icons turn out really small after the install.. other than that, everything works great?
got my opera from this link (not sure if external links are allowed, pls remove if its not!)
http://www.ipmart-forum.com/showthread.php?t=303148
zer0tr said:
i upgraded to opera 9.5.2745
just run the .cab and it was done without any problems...
but the icons turn out really small after the install.. other than that, everything works great?
got my opera from this link (not sure if external links are allowed, pls remove if its not!)
http://www.ipmart-forum.com/showthread.php?t=303148
Click to expand...
Click to collapse
You might have a QVGA version. This thread has links to both VGA and QVGA versions, but there is apparently a problem with the VGA version posted:
http://forum.xda-developers.com/showthread.php?t=442252
See post #115 of the thread, someone has helpfully posted instruction on how to get the QVGA version working in VGA. Simply replace the skin file and the loading image (png file) and edit your opera.ini file with new zoom settings.
how exactly do you upgrade the .NET to 3.5. i downloaded it from the microsoft website and it said it wasnt a valid ppc file.
i used the search function (typed .NET and also tried .NET upgrade) i even tried google. anyway basically all i want this for is so i can use the diamond beer app aswell as any other app i might download or create that might need it.
thank you.
Look here:
http://forum.xda-developers.com/showthread.php?t=468535
install the correct version... correct file is named
NETCFSetupv35.msi (recommended google search)
Greetz
Boris
P.S. you have to install it to ppc from starting it on PC while being connectet to ppc via active sync!!
thanks so i found this site.
http://microsoft-net-compact-framework.en.softonic.com/pocketpc
is there a way to do this with out the active syn. i havent set it up yet and find it easier to just put it on my sd card and install like every other program.
if not thanks for ur help.
Hi guys I know this as prob been posted allready but i cant seem to find an answer. I installed andvanced config to change theme on diamond but i get error messenge when i try to start up the app. Any help will be greatly appreciated
thank you
Nibob said:
Hi guys I know this as prob been posted allready but i cant seem to find an answer. I installed andvanced config to change theme on diamond but i get error messenge when i try to start up the app. Any help will be greatly appreciated
thank you
Click to expand...
Click to collapse
Whats the error?
Im guessing you dont have .NET 3.5?
the error says ( An unexpected eroor has occured in diamond TF3D Config.exe)
And yes I have Net 3.5
Nibob said:
And yes I have Net 3.5
Click to expand...
Click to collapse
why are you using ADVANCE CONFIG. to change the theme??? why arent u using MANILA CUSTOMIZER ??
if u want i can upload my copy which work gr8!!
I wasnt aware of Manilla customizer i would really appreciate it if you did post you copy
thank you
I cant change the theme with Maila customizer
Use Diamond TF3D Config for changing themes. As for .Net 3.5, have you also installed .Net Config and set 3.5 as the default?
Im not sure what you mean by deafault I installed both and when i try to start up adv config i aways get an error
How do i set 3.5 as default?
I'm not sure if this works for Advanced Config. but for the Diamond TF3D Config program the creator said if you get that error, your registry is messed up. He lists a change u can try in your registry or delete the tweaks.xml file in the directory the program was installed. Here's the link if it will help http://forum.xda-developers.com/showpost.php?p=2430410&postcount=390
This is assuming you've already installed .Net 3.5. Install .Net Configuration to internal memory (cab below). This allows you to change the CF version used for applications on your device.
Run '.Net Configuration' from your Start Menu.
Go to the 'Device Policy' tab and select version 3.5.
Selecting 'Apply' then 'OK'
mikejames07 said:
I'm not sure if this works for Advanced Config. but for the Diamond TF3D Config program the creator said if you get that error, your registry is messed up. He lists a change u can try in your registry or delete the tweaks.xml file in the directory the program was installed. Here's the link if it will help http://forum.xda-developers.com/showpost.php?p=2430410&postcount=390
Click to expand...
Click to collapse
yep delete the tweaks.xml file in the directory the program was installed in and the program will run fine!!!
follow the instructions on this page and you will be happy again!!
http://forum.xda-developers.com/showthread.php?t=437420
Hi and Thx for the help i did see that page but i cant seem to get in my regestry could any1 refer a good app for this.
thank you
emesbe said:
This is assuming you've already installed .Net 3.5. Install .Net Configuration to internal memory (cab below). This allows you to change the CF version used for applications on your device.
Run '.Net Configuration' from your Start Menu.
Go to the 'Device Policy' tab and select version 3.5.
Selecting 'Apply' then 'OK'
Click to expand...
Click to collapse
thx but manila customizer doent do what im looking for
mikejames07 said:
I'm not sure if this works for Advanced Config. but for the Diamond TF3D Config program the creator said if you get that error, your registry is messed up. He lists a change u can try in your registry or delete the tweaks.xml file in the directory the program was installed. Here's the link if it will help http://forum.xda-developers.com/showpost.php?p=2430410&postcount=390
Click to expand...
Click to collapse
--------------------------------------------------------------------------------
Hi and Thx for the help i did see that page but i cant seem to get in my regestry could any1 refer a good app for this.
thank you
Well i finnaly got it to run thanks to every 1 who posted much appreciated .
Does any body know how to change a theme with this app?
Several months ago. I found a CAB file that I installed on my HTC Tilt Pro 2. This was only
the cab version someonne had posted. I have clicked through many pages and can't find it anymore. It was only the CAB version. I don't want to have to install this thru active sync. I downloaded and could just go to my memory card and load it, any time. Could someone help me out in finding this CAB file. I have clicked on some and it took me to the microsoft web site. All I need is the file. Thanks so much in advance if you can help me out. Net Frame 3.5 CAB
http://catagprs.evonet.ro/ppc/programe/NetCompactFramework_v3.5_all ppc cab/v.4.5_pe categorie/