Related
AFAIK the kaiser should use my home net connection when synched with my PC right?
I remember when I was setting up / installing that I ticked some kind of box to not use hosts net conn when attached via USB (God knows why I did, I knew it was a bad idea after i hit OK...) but I don't remember where I set it.
I have looked around and can't seem to find any setting like that - any ideas?
if i'm not mistaken, that's a setting you need to change when you DON'T have your device connected to your pc.
eric b
evilc said:
AFAIK the kaiser should use my home net connection when synched with my PC right?
I remember when I was setting up / installing that I ticked some kind of box to not use hosts net conn when attached via USB (God knows why I did, I knew it was a bad idea after i hit OK...) but I don't remember where I set it.
I have looked around and can't seem to find any setting like that - any ideas?
Click to expand...
Click to collapse
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Hmm, that reg entry didn't seem to do it. I still can't access the net on my mobile through my pc.
its a setting in activesync/Mobile Device center, you will know it when you see it
In activesync go to file-->connection settings...--> and uncheck the allow wireless connection on device when connected to the desktop and your phone should stop using gprs instead of activesync to connect to the net when your connected.
hmm I still can't get a Internet connection through my computer! Does someone else still have the same problem?
Geko
Same problem here. I have the latests ActiveSync....I have "The Internet" selected as what my PC connect to in ActiveSync. I have un-checked "Allow Wireless Connection" - and still nothing. The phone won't sync with my Exchange server when connected to my PC....very annoying because the phone lags behind my 'real' schedule as a result!
Anyone?
GekoCH said:
hmm I still can't get a Internet connection through my computer! Does someone else still have the same problem?
Geko
Click to expand...
Click to collapse
Go check your router and/or firewall settings....
Your Kaiser should have it's own IP adres cause syncing is a network-based affair these days, so this might cause the problem in your network setup...
Check Settings/USB to PC ; change the Enable advanced network functionality, and try again. Happend to me in Vista, and after messing with this setting Windows Update downloaded latest driver for HTC and fixed the problem. (As i remember you can change it back afterwards, if it solves your problem).
thanks for all the help so far guys.
It definately seems to be an issue with activesync (ie the desktop PC) because when I connect to my PC here at work, it is all fine.
darkilici said:
Check Settings/USB to PC ; change the Enable advanced network functionality, and try again. Happend to me in Vista, and after messing with this setting Windows Update downloaded latest driver for HTC and fixed the problem. (As i remember you can change it back afterwards, if it solves your problem).
Click to expand...
Click to collapse
Thanks darkilici...!! I un-checked "advanced network functionality" under Seettings, Connections, USB-to-PC, and when I plugged my TyTn II back into my PC - it "found" the device again, re-loaded the driver, and now I am accessing the Internet on my TyTn II through my PC! Thanks......HUGE!
Much appreciated.
Unchecking it caused my phone to be able to use wireless while synched - thanks!
But if I tick it again, it goes back to how it was.
The error I am getting is:
"The page you are looking for cannot be found due to error 0x80072f78"
Even with it unticked, it's not really what I want. I want it to use my much faster broadband connection while tethered...
I think I may do a hard reset.
I forgot to ask, by any chance are you on T-Mobile (or any network that requires a proxy to access the net over GPRS)? If you are, then you have to disable the proxy server to be able to access the net over activesync.
Yes, I am on T-Mobile with Web n Walk.
Do you mean the one in "Connections"?
I removed that proxy tickbox and it seems to work now. Do I not need the proxy? What is it for? Cacheing? Or is it only to enforce the "No adult content sites" block? (Which I have removed so I can access facebook)
Thanks ever so much!
I'm on t-mobile in the US and I have to have the proxy to access the net over GPRS or it won't work at all. I'm not sure about if you need the proxy in the UK or not, but the easiest way to find out is to try to access the net over GPRS without the proxy and see if it works or not. If it doesn't the it would probably be easier for you to set up a second connection, the first with the proxy the way you already have it set up and then a second that has the same settings as the first only without the proxy settings. Then, just switch between the 2 when needed. Unfortunately that's the simplest way to do it that I have found.
Hmm, I'm actually looking for something like this, but not. Anyone know of a way to make it use AT&T's internet while connected to a computer with ActiveSync? That registry tweak works great for when I'm at home, but when I'm at work or something, I may want to use my phone's internet (GPRS/EDGE/3G/HSDPA). I have a program that lets me control my kaiser from a computer (MyMobiler), but it needs activesync. If I have Activesync, I have to use my work internet (which I don't want to do). Hopefully that makes sense.. Any ideas?
internet sharing tool and enable/disable cabs
yea, that should do the trick since it's been the same when i had a hermes
I am having a problem that when i connect my phone to my work PC my media net 3g quits working.
I have changed the option in advanced connections, server selection, to use media net on both options but i am still getting no 3g/edge etc. Everytime i sync my phone it tries to use my PC connection as the active internet source.
What i want is to have my phone synced but still use my phones 3g internet on the phone and my LAN for my PC.
Can anybody help me figure out why my phone's internet is replaced by my PC's?
Thanks!
Under "Connection Settings" do you have the box checked that says, "Allow wireless connetion on device when connected to the desktop"?
Yes i do. And when i partnered with active sync i selected the option to allow internet calling etc.
It has to be a background issue. Afaik all the options are correct.
After a little further reasearch it appears that when i connect my phone to the computer the proxy server is changed to my work proxy. If i over ride it to the correct cingular proxy it still does not work.
Any help on this? It's getting annoying. It worked fine for a week then just quit working.
hi guys.just got my tytn II today.but active sync is not detecting in anyway.my handset is enabled with usb.but when i plug it to the computer onlya sound comes but active sync does not detect it.any helpwould be much appreciated...sorry if this happensto be a repost.
when im trooubleshooting its tellin me this:1.unable to get ip adress..go to web add for help.2.unable to establish connection between pc and device.
3.no additional known issues....i checked out the web sites...everythings fine...but still not working the active sync.
9billy said:
hi guys.just got my tytn II today.but active sync is not detecting in anyway.my handset is enabled with usb.but when i plug it to the computer onlya sound comes but active sync does not detect it.any helpwould be much appreciated...sorry if this happensto be a repost.
when im trooubleshooting its tellin me this:1...go to web add for help.2.unable to establish connection between pc and device.
3.no additional known issues....i checked out the web sites...everythings fine...but still not working the active sync.
Click to expand...
Click to collapse
If your PC is "seeing" your device but Activesync is not:
Make sure that you are running Activesync 4.5.
Change your USB to PC Settings (Start>Settings>Connections Tab>USB to PC) while your device is hooked up to your PC to see if that triggers the recognition.
Check your Activesync Connection Settings (File>Connections I think) and make sure that Allow USB Connections is selected.
Disable your firewall on your PC, if you can connect then, you need to enter exceptions in AS to get past this restriction.
Another thing to check: Check your Network Card Settings (Start>Settings>Connections Tab>WiFi>Network Adaptors Tab).
Tap on Remote-NDIS Host. Make sure that User Server Assigned IP address is selected.
I had a similar problem once. Turned out is was my own fault.
I had manually disabled the network connection Activesync needs to detect the Kaiser. This might be relevant for your issue:
On your computer goto 'Network Connections' (via 'Control Panel', assuming you have XP)
Connect the Kaiser to the computer
Enable the disabled network connection
You might want to switch to 'Tiles' view. The third line will read 'Windows mobile-based device'. That network connection needs to be enabled.
Good luck!
HeavenLee said:
Change your USB to PC Settings (Start>Settings>Connections Tab>USB to PC) while your device is hooked up to your PC to see if that triggers the recognition.
Click to expand...
Click to collapse
This trick helped me
for mine, I had to disable the "advanced network functionality" under Settings -> connections -> USB to PC before it would sync.
Same hint helped me to to uncheck the tab for the "advanced network functionality". No clue why.
Regards
ME HELPED THIS TWO THINGS :
1.
Another thing to check: Check your Network Card Settings (Start>Settings>Connections Tab>WiFi>Network Adaptors Tab).
Tap on Remote-NDIS Host. Make sure that User Server Assigned IP address is selected.
AND THEN THIS :
2.
Change your USB to PC Settings (Start>Settings>Connections Tab>USB to PC) while your device is hooked up to your PC to see if that triggers the recognition.
THAAAANKS !
OK I tried everything and cannot sync with my corporate PC work (XP with SP2).
I cannot get a local network LAN address on the Tilt regardless if I use NDIS or not and regardless if I provide the DNS server address or not it insists on its default mobile IP.
Funny enough "My Mobile" works through "Connect IP" to the default IP address 169.254.2.1
I tried almost all settings and nothing worked. On top I contacted MS just to receive a hotfix for the USB-2-NDIS drivers which didn't work either.
ANY idea anybody?
I also get the mysterious 80072EFD error from activesync 4.5.
PS: At home I can sync with the company server over the internet connected to my W2K SP4 workstation without any problem.
See attached screenshots
hmm my laptop recognizes my phone...its says its connected..but it just wont sync any ideas why>?
running vista btw
Dr. Strangelove said:
I had a similar problem once. Turned out is was my own fault.
I had manually disabled the network connection Activesync needs to detect the Kaiser. This might be relevant for your issue:
On your computer goto 'Network Connections' (via 'Control Panel', assuming you have XP)
Connect the Kaiser to the computer
Enable the disabled network connection
You might want to switch to 'Tiles' view. The third line will read 'Windows mobile-based device'. That network connection needs to be enabled.
Good luck!
Click to expand...
Click to collapse
This was my problem as well. I had disabled the network connection, but could not find it any more in Network Connections (on my PC). I ended up having to run the ActiveSync installer msi and telling it to repair. That fixed things nicely.
verona said:
Same hint helped me to to uncheck the tab for the "advanced network functionality". No clue why.
Regards
Click to expand...
Click to collapse
I had that problem until I installed a flashy new NEC PCI USB 2.0 Adapter card in my PC and stopped using my motherboards onboard VIA (Appolo Pro chipset) USB 1.1 ports. The Activesync 4.5 connections are now far more reliable and I can connect both with or without advanced networking functionality ticked. It looks as if the type/quality of USB port in the PC has alot to do with things.
Now the remaining annoying issue with AS 4.5 I have is that when transferring large wmv files to my TyTN IIs storage card (or even internal memory), the progress bar that appears to indicate the file is transferring never gets to the far right side but always resets back to the beginning (sometimes several times when part way along during the transfer). Is this behaviour which other users of Kaisers connected to Win XP machines have observed? Can anyone throw some light on what's going on to cause this?
transferring large files/data fails
Click to expand...
Click to collapse
That's actually a known issue with USB. A std. USB driver connection through AS (regardless what version) will time out after 4 something seconds which may not be enough to write a file to your device/storage card. Best money I ever spent was for Softick Card Export II. It gives you the possibility to either active sync or "card export" data. Card export will enable your storage card as removable drive (just like with a card reader) an you can copy all data you want. Kinda slow but reliable. I just transferred 5 MP3 CD's on my storage card without any problems.
tyguy said:
A std. USB driver connection through AS (regardless what version) will time out after 4 something seconds which may not be enough to write a file to your device/storage card.
Click to expand...
Click to collapse
Thanks for the tip with that software. I'm not that concerned that I'm willing to fork out money though Just to clarify things, the files do still get across without any problem or failure (and no Activesync disconnects now), it's just the progress bar doesn't correctly indicate whats going on. FWIW the progress bar progresses for far more than 4 seconds before resetting back to the beginning probably 30 seconds or so but I've not timed it. Have you, tyguy, or other users, observed this behaviour with the Kaiser under XP or does the progress bar behave itself for everyone else?
My process bar fluctuates all over the place. Indicating 30 secs, 4 min, back to 20 secs guess it's as accurate as an hourglas, nice animation though - LOL
thanks
thanks this Worked for me on HD2.
Please, can someone explain how to connect the Diamond to Internet when is connected to the PC with ActiveSync? I understand it is possible
Settings -> Communications -> Internet sharing
Your PC should connect now.
No - I think he means how to get the Diamond online through the PC's connection, not the PC through Diamond's connectivity.
On my diamond it is online whenever it is connected to a PC with activesync running. That's as long as the PC with activesync is connected to the internet.
I think you need to have advanced connectivity enabled under the device's ActiveSync settings.
krakout said:
I think you need to have advanced connectivity enabled under the device's ActiveSync settings.
Click to expand...
Click to collapse
Correct. It's enabled by default.
For some reason I dont seem to be able to browse web via my mobile browser while device is connected to Activesync (USB cable)
I've checked Allow Wireless Connection and disabled high speed syncing in Conenctions USB>PC on my Xperia.
This affects email and internet data connections and apps. In internet explorer and IRIS I get a 403 error.
I have activesync as "Computer connects to Work Network"
When I disconnect from Activesync I can browse as normal.
Having gone through the usual suspects and done a search I can't seem to find anything that addresses this particular iteration of the 403 error so would gratefully accept any suggest
You don't need the "Allow Wireless Connection when connected to the desktop" ticked. (Unless you want to use WiFi on the X1 while plugged in via ActiveSync).
My ActiveSync "This computer connects to" is set to "The internet", not Work Internet.
Allow USB connections.
On the X1,
Got to Settings, Connections Tab, USB to PC.
Make sure ActiveSync (Sync with outlook) is selected, then make sure "Enable advanced network functionality" it ticked.
cheers for your reply Steve. (good collection of apps too)
These are all options I've tried already (think I've tried every combi) and I end up with the same result - as i get not data connection when i connect the USB. If I open IE or IRIS beforehand and then connect as soon as I browse a new page I get the 403.
I'm sure this didnt happen last time I tried to browse this way but have no idea what could have changed. I thought it could be a connection settings thing - IRIS has loads of options for connections and I've tried all of this, all unsuccessfully. IE doesn't appear to have any options.
Anyone know of any tweaks or reg fixes?
duplicate post
one other thing - if I go to conenction amanger and try to activate Data connection while conencted to activesync, I get sent to the Settings > Connections screen. Data connection will not activate.
I can't offer anymore help Don't know what's up with yours.
cheers anyway steve. gonna wager on a reinstall of activesync and also try on my home pc to see if this is any different.
I know GP can block using device as modem/internet sharing, but this would be different so who knows?
interestingly I've just discovered that I'm still receiving emails when this problem occurs. I wonder if something could be preventing http requests?
just to recap, this works when synced with my home PC, but when synced with my works PC I can't access http via 3g/hsdpa, nor through the PC. I can however receive emails.
As the attachment shows, the phone is connected to the HSDPA and Activesync via USB.
I've reinstalled Activesync on this PC, and experienced an intermittent connection following this - however following this short period of activity the connection halted again.