Since buying my AT&T Tilt I've done two backups using the included Sprite software and had the same errors each time:
Warning : File could not be included
\Windows\compimeh.0409.dat
Warning : File could not be included
\Windows\lic\lsoma0000000000000000000000000000000000000000.db
Warning : File could not be included
\Windows\btdisk.tmp
Is anyone else getting these same errors? Can anyone determine if these errors will cause problems when/if I tried to restore from this image?
theres already threads on this. exclude or ignore it
I have the HTC TyTn II and SPB Backup is giving exactly the same errors.
I have not tried Sprite backup
Regards
I have used the sprite backup on my Kaiser and it worked perfectly.
I did a hard reset. After the hard reset ran restore.
Everything was back where is should be.
Just wanted to make sure it worked, before changing too many things.
I also tried spd-backup, just to back up my contacts.
Worked fine.
Still new to the Kaiser, so before I really get into it,
I want to be sure I can get out.
Centred Comic Sans makes baby jebus cry
I get the same error with the lsoma db but a restore still works fine. Just ignore it.
Yep same errors here!
thanks guys - and sorry kireol - i searched the entire kaiser thread for "sprite" and found no topics that were anything close to errors in sprite.
np. i wasnt complaining, just letting you know so that you can read more
hicks said:
Centred Comic Sans makes baby jebus cry
I get the same error with the lsoma db but a restore still works fine. Just ignore it.
Click to expand...
Click to collapse
Funny, then I looked at my own hands.....Stigmata
kireol said:
np. i wasnt complaining, just letting you know so that you can read more
Click to expand...
Click to collapse
not a problem reading - it's a problem with people naming threads in less-than-informative ways
Related
i tried upgrading to wm2005 and it works fine as a pda and for satnav but dosent work as a phone, it will not get anysignal and when it lodsa sometimes in the corner it shows the a redio version other times it willl show just the rom, ive tried upgrading just the radio, ive tried upgrading it all, ive tried returning it to standadrd and it just wont accept anything? ant help anyone? i just want it back to standard.
come one people, 65 views and not one reply? someone must be able to help? i remember when this place used to be helpful.
What operator are you on? All of the recent ROMs do not work on Orange UK. The phone and txt message functionality is broken.
As for not showing the ROM version, this always happens after a crash. Just reset again as soon as you see "NONE".
am a bit lost here.
am on orange UK and evreything works ok with this rom.
just thought i point that out.
opps,thats all rom's since mid november
TEXT,PHONE BLUETOOTH WIFI.
Read The Wiki
NeCrOpHiLiCaT said:
i tried upgrading to wm2005 and it works fine as a pda and for satnav but dosent work as a phone, it will not get anysignal and when it lodsa sometimes in the corner it shows the a redio version other times it willl show just the rom, ive tried upgrading just the radio, ive tried upgrading it all, ive tried returning it to standadrd and it just wont accept anything? ant help anyone? i just want it back to standard.
Click to expand...
Click to collapse
not being funny, but there are a few pages in the Wiki that can help.
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home : explains all about WM5 on a BA
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5 Gives you STEP BY STEP instructions how to go back to 2003
NeCrOpHiLiCaT said:
come one people, 65 views and not one reply? someone must be able to help? i remember when this place used to be helpful.
Click to expand...
Click to collapse
Before you complain that users cant help you, try helping yourself. You will find that people are more willing to invest their time then!
realkinguk said:
am a bit lost here.
am on orange UK and evreything works ok with this rom.
just thought i point that out.
Click to expand...
Click to collapse
Wierd, you are the first to come forward to say that it works fine for you. Myself and a couple of other users haven't been able to get reliable telephony for months now. It may be a regional thing, perhaps only in Scotland. I've had replacement phones and I still have problems.
No one seems interested in helping as it's not something that can be easilly tested unless you have the problem yourself.
i was looking for hte downgrade link ill give that a go tomorrow, as tot he person that said i should try helping, how can i help if i dont know anything? we all need to learn and start somewhere. think ill be staying away from here with my spvm600 if thats the attitude this place is takeing.
Hey, it wasn't intended at you, obviously. What I was basically saying was that if you have the same problem, then don't expect a fix as it's a tough one to fix.
could it happen that you are one of those who downloaded the rom which someone had the gall to replace the original one? which rom upgrade did you use?
i cant remmeber what rom it was that i used now as it was about 2 months ago i done it, ive tried the downgrade link that was posted and when i open maupgrade it dosent see any rom on my device or any in the folder and when i click up grade it takes about 10 sconds then says tis done, which is obviously isnt dont, any mroe ideas please people?
NeCrOpHiLiCaT said:
i cant remmeber what rom it was that i used now as it was about 2 months ago i done it, ive tried the downgrade link that was posted and when i open maupgrade it dosent see any rom on my device or any in the folder and when i click up grade it takes about 10 sconds then says tis done, which is obviously isnt dont, any mroe ideas please people?
Click to expand...
Click to collapse
use one of the latest (i.e. helmi's or xplode's) and upgrade again. be sure to follow the instructions (including that for device data, and the no/yes/yes input). make sure also you were able to download the whole file (it was a problem for some users).
you might also want to upgrade your radio version (1.15.00).
good luck.
I have a Tmo mda gen 3
task: upgrade rom to faria
So I wanted to try the new wm6 rom (faria) so I starting reading and reading here on XDA and other places for any and all information about the best way to do an upgrade, mind you I already upgraded to 2.24 so my mda is already unlocked and ready to get flashed.
So I did a backup with sprite, I didnt do a updatefile step which is suppose to make an upgrade file so when you do get the new rom on its suppose to help ,but anyways I got a backup.
I flashed the rom to my mda and I had it working, just like everyone said, it was faster, more toys and seemed to work!
Now I did a (selective) restore (only restoring needed stuff), well... sprite warned about rom versions ,but it restored my files including my registry.
low and behold EVERY one of my programs worked, GPS, google maps, etc
,but 2 issues I can not resolve.
timewizard.exe randomly pops up
voicecommand does not work
so it appears the only advice for the timewizard.exe was reflash , which I have done a few times in trying to get voicecommand working ,but the popup message seems to come back, mainly after a registry restore.
voice command is the bigger one, it appears when I restore the registry it blows away some voice command entries from the pre installed voice command 1.6 and then voicecmd.exe does not want to run.
So my question is I am sooooo close to being able to make a backup change roms and get EVERYTHING back WITHOUT reinstall of software I can taste it ,but I need some input!
anyone know some good registry tools / editing suggestions to backup the registry and restore it without killing voice command?
Jeff
Try flashing back and creating an upgrade file. I'd love to know whether it works ;-)
Thats what I did and it worked, however what I did first was
flash to the orginal rom, 2.24 xcel
I restored the sprite backup , however voice command didnt even work going back to orginal rom.
then I removed voice command 1.5 from installed programs.
cleaned up some file space only had 6 meg left on main storage.
then I create the updatefile and saved it to sd card.
finally did another complete backup
flashed to new rom and then did a restore and now voice command works, I will be doing some more testing ,but I think I got it.
if I would have had to install each program seperately that would have killed me!
jeff
well.. forget what I just said.... nothing works!
back to the drawing board......
all the files restored correctly ,but the registry did not restore when using the update mode AND the updatefile.
none of my programs appeared in the start menu and none of the registry entires were restored....
I'll try doing some manually restoreing and see what I get... maybe I missed something....
Jeff
well... I hope my ramblings help someone else!
so I think the key here was simpling removing voice command from the backup file and upon restore everything will work.
so in short, backup upgrade rom , restore works with sprite , but without using the updatefile mode as it seems it just ignores the windows folder and the registry , so whats the point?
I test some more and post my comments to help others who do not want to reinstall everything when they upgrade rom's.
If you get this to work, that would be great, but I think you are playing with a loaded gun trying to do this. Many things are very different between WM5 and WM6. Depending on the type of backup done and what all gets restored, I can see corruption of the registry, and things just not being put in the right place.
Well... so far ALL my apps are working, gps, google, opera, etc about the only thing now is I am getting a Notification
TimeWizard.exe could execuite.
I am hunting that one down in the reg right now.
any ideas?
jeff
Well ... to follow up my thread with my self and maybe help a few others.
the last issue I had after a rom upgrade and a restore was the dreaded timewizard.exe notification popup when you turn on the mda or come back from power save.
after hours/days of messaging around I found that in the "Task Manager" tool you can view Notifications and in there I found timewizard.exe listed a few times, I just assume it had this as a warning/notification and was simply "Notifing" me of a "past" problem. after I cleared it out of there the mda has not shown any more Can not execute TimeWizard.exe popups!
I hope this help anyone else with this issue.
Jeff
Closed this thread
go here:
http://forum.xda-developers.com/showthread.php?t=332789
itje said:
Ok here goes nothing
Whats in it (for now)
-TouchFlo with TF-settings
-10 button CommManager
-Htc Home build 2.0.814.722
-Networkwizard
-HTC Audiomanager
-psShutXP
-Hibernate
-TouchDialer
-MagicSS
-NotSoBlackKeyboardSkin
-HTC X-button 1,5
-HTC wmp skin
-Glossy Black bars
-Office 2007
-PHM registry editor
-Total Commander 2
-PIM backup 2,5
-Batterystatus
-Adobe Flash Lite
tweeks:
-Disable today items
-Disable sms sent notification
-Reminders show only once
-Wireless G enabled
-Disable customer feedback notification
-Security off
-SD battery drain fix
Removed:
-Windows Live (for better space and many dont use it, you can find cab to install newer version on the forum)
-Transcriber (VERY few uses it, saving space)
Instructions how to upgrade is in the Touch-IT folder.
READ IT.
If you dont, you will spend even more time infront of your computer flashing the official ruu before trying again, why waste time, use 1 min to read and understand.
Remember:
If you dont like what I have added, or what I have removed or w/e please dont spam this thread with lame comments.
Disclaimer:
I take NO responsebility if you brick your device, if you do search the forums before you come flaming me/us here at XDA.
IF you brick your phone (Brick=the phone can be used as a building brick, or maybe a paperweight? Because you cant start it up.) Its no others fault but your own.
Mainly the reason for bricking a phone is:
1. Not reading the instructions good enough
2. Not following the instructions.
3. Not having a RUU that can unbrick the phone (the official installer with the official rom for your specific phone, with your phones default language. In.ex if yu have a german phone by default, you need a german RUU, if not you will get invalid vendor error)
4. Not reading the instructions good enough..again
5. Not following the instructions...again
If you dont understand after reading CAREFULLY, then dont bother flash your device with this or any other rom.
I also recommend to use the pagepool changer found here http://forum.xda-developers.com/showthread.php?t=324955
I did nothing to the pagepool, because ppl have different experience with diffrent size on the pagepool, so thats why I leave that up to you
to find the correct pagepool size for your device.
Good luck
Download here: (only rapidshare for now)
Rapidshare
Click to expand...
Click to collapse
Downloading now, will post back when its installed
im just as qurious as a virgin at her weddingnight if it works out
Prepping my wing for it now
I will try this out and see what happens. I just started playing around with the other posted touch it rom. I do have an odd problem when i flash. I followed the instructions exactly. Established the aserg policies soft reset. put the phone in flight mode wait and soft reset. And then start the update. every time i do this tho i get this weird message titile ERROR - Uknown Status. First time i got it i acknowledged and that was a mistake as the flashing got screwed up. next time i didn't and the phone seemed to flash. and it was working. Anyways had this error ?
intothevoid said:
I will try this out and see what happens. I just started playing around with the other posted touch it rom. I do have an odd problem when i flash. I followed the instructions exactly. Established the aserg policies soft reset. put the phone in flight mode wait and soft reset. And then start the update. every time i do this tho i get this weird message titile ERROR - Uknown Status. First time i got it i acknowledged and that was a mistake as the flashing got screwed up. next time i didn't and the phone seemed to flash. and it was working. Anyways had this error ?
Click to expand...
Click to collapse
The error is completely normal, do not touch your screen when you see it. Let it sit and see if the installation finishes.
you can check my thread for install instructions as well
Flashing now cross your fingers
Im also uploading a mirror
hmmmmmmmmm.... interesting!
from the description looks like a perfect recipe of apps.
Will try tonight.
Thanks
also, would you rather us post in here, or in the development thread?
So far Im going on 20 minutes of install time, its still copying itsutils.dll currently.
WELLLLLL?????
whats going on then, anyone done yet
TylerC161 said:
also, would you rather us post in here, or in the development thread?
So far Im going on 20 minutes of install time, its still copying itsutils.dll currently.
Click to expand...
Click to collapse
post here, keep it simple
20 min??? wow
itje said:
post here, keep it simple
20 min??? wow
Click to expand...
Click to collapse
Mines 20 minutes into it to, but thats normal. I would say another 10 mins and it will be done. ITs copying the os.nb now.
Something crapped out on my machine and killed the connection, got to start over.
itje said:
WELLLLLL?????
whats going on then, anyone done yet
Click to expand...
Click to collapse
I'm downloading it rite now and will try it out shortly.
Bricked..
Trying again, loading RUU now.
TylerC161 said:
Bricked..
Trying again, loading RUU now.
Click to expand...
Click to collapse
awwwww!!
TylerC161 said:
Bricked..
Trying again, loading RUU now.
Click to expand...
Click to collapse
Same here, Loading RUU and will post back after ive tried again.
cleric said:
Same here, Loading RUU and will post back after ive tried again.
Click to expand...
Click to collapse
awwww times2
guess there might be a bigger diffrence with the wing os then I expected....hmmm
or maybe its the settings with the kitchen that is not fit for the wing? hmmmm
Or it could be we both just did something wrong.
I forgot to turn on flight mode before starting, Im about to attempt again.
try to install the enablerapi, and the cert.spcs also, I must confess im not sure what they do, but some have been sucessfull doing that when bricking only using asergspolicies...or maybe they just had luck
I have a tilt with the built-in spirit backup. I tried to use it but when I did the restore after updating the rom, alot of the programs wasn't restored properly or registry info was changed back to befault. I thought Spirit was supposed to restore everything after a hardrest or a rom upgrade? Did I do it wrong or something? Because of this, my computers all want to resync all the contacts and everything all over again, which is a pain as it takes hours to resync(thats another issue, but not related to this)
Hard-reset. Yes.
Rom upgrade. No.
And the built-in sprite backup was a trial. Did you buy it? If not you're screwed. Sorry man.
Sprite is retarded in a lot of ways. You should start using PIMBackup and -UC-.
Kraize
I used the one that came with the Tilt. Ok, so what I seen already, I got screwed. What program is good to do a complete backup, where I won't need to resync(where it thinks its a whole new phone) with my activesync after the restore?
starstreak said:
I used the one that came with the Tilt. Ok, so what I seen already, I got screwed. What program is good to do a complete backup, where I won't need to resync(where it thinks its a whole new phone) with my activesync after the restore?
Click to expand...
Click to collapse
The full version of Sprite is by far the best backup utility out there. SPB Back Up would come in a close second.
Sprite (full version) has an option for retoring to an "upgraded" rom. But my opinion is, if I change the rom all together (not just a hard reset) I am manually loading all my programs.
Test both extensively before purchase.
spirit backup says i don't have enough memory on my card but i have almost a gig empty. this just started. please help
by the way, this happens when i try to backup . thanks
ok I have searched for an answer,but could not find any solution.
I am running the Hyperdragon III rom jan 13th.
I just noticed today i can not open any email or create a new email it just does nothing. your help please. also i had a couple backups one from the other day and the other from last week. with both i still have the problem. I would perfer not to HR and have to reinstall.
thanks
Did you happen to install the cab from this post?
I did, and it had the same effect - couldn't open or create email. There is talk of a solution at the end of that thread, but I'm impatient - I did a hard reset already.
ya i did install that one. did a hard reset and everything is good now. but sucks i had reinstall everything.
bullseye69 said:
ya i did install that one. did a hard reset and everything is good now. but sucks i had reinstall everything.
Click to expand...
Click to collapse
You need to post this on the Hyperdragon thread, as I remember, SJ has been having email trouble with his new roms. It is a Hyperdragon, not a Kaiser problem.
As I remember, a work around was proposed. Have you even read back in the thread?
denco7 said:
You need to post this on the Hyperdragon thread, as I remember, SJ has been having email trouble with his new roms. It is a Hyperdragon, not a Kaiser problem.
As I remember, a work around was proposed. Have you even read back in the thread?
Click to expand...
Click to collapse
The fix was posted in PDA thread and i put it in .cab without testing, anyway it fixes the multiple sms issue, where it only marks the latest message in the thread as read, well 12hrs later we all find out it breaks email, hard-reset neede, all part of the game we play
if this cab/dll is replaced with original one does it fix the email? I trying to avoid hard reset but need e-mail back.
saopacic said:
if this cab/dll is replaced with original one does it fix the email? I trying to avoid hard reset but need e-mail back.
Click to expand...
Click to collapse
No it won't, the way i tryed was by renaming htmlnote.dll to htmlnote.dllold in the Windows dir with total commander as when you reboot this will invoke the ROM to replace original ROM file, no sucess it must nock something else out....