Database Develop

The double letter issue - How many have this?

I've been having an issue with my Kaiser keyboard. When typing the same letter fast, not all the keystrokes are registered. For example, instead of "www.google.com" the phone often registers "ww.gogle.com", instead of "hello" it might register "helo", etc.
For whoever hasn't noticed such a problem, try the following, since it is particularly evident when you do this:
Type "WWW" or "AAA" really fast without using the Caps lock but keeping the Shift key pressed instead. Are all the keystrokes registered?
The following helps a bit but does not eliminate the problem:
Start -> Settings -> Buttons -> Up/Down Control
If you put the delay to minimum, it seems to make things better.
How many people have this issue? I've read people's posts complaining about this, but not a lot and I'm trying to figure out: Could this be a hardware issue? Should I ask for a replacement?

I have the problem, but I always associated it with more of a problem with the phone "thinking" (background app running, etc) and the background app making it skip. I will try the suggestion about Up/Down control and see if that helps and report back.

I am actually having the opposite problem.
Often i get double letters where I only pressed the key once ....

I have this problem, but I was just assuming it was user error (retardation?)

i definitely get it too, all the time... and i type well, dammit

I have that issue quite a bit. I actually exchanged phones because the 1st one the keys wouldn't click when pressed so I had MMMMMM and aaaaa qqqqqqqq all the time. the new one has the issues, but the keys seem to click and its not as bad.

randomtask16 said:
I have that issue quite a bit. I actually exchanged phones because the 1st one the keys wouldn't click when pressed so I had MMMMMM and aaaaa qqqqqqqq all the time. the new one has the issues, but the keys seem to click and its not as bad.
Click to expand...
Click to collapse
I had the same issue as randomtask with my first tilt. Several of the keys didn't click when I pressed them so my finger automatically would hit them multiple times. My replacement is much better for that problem, but now I do get the occasional gogle. It has gotten better them more I have gotten used to the keyboard though.

I used to have this problem first got the phone-- maybe the first couple of weeks of use. I haven't noticed it in a long time though and just checked and it's definately not there anymore. I have the tilt and did flash the ROM and don't recall having had the problem since then but don't remember if it stopped happening before or after I flashed it.
It was really annoying. I'm glad it's gone.

I have a similar issue, but it's much more annoying IMO.
When I type fast, the spaces between words becomes really funky. If I hit the spacebar and then another character right after it, the character shows up on the screen before the space. It ends up looking like: Thisi s howa textm essagee nds upl ookingo nm yp hone.
There is definitely a problem with the phone reading input (and not my fingers). I sat there and pressed the same key and space in rapid succession for a few minutes trying to figure out the behavior. It seems like rapid input of space followed by character results in the output of the character followed by the space.

I was able to solve this issue by disabling the Suggest Words and Autocorrect options under the Input tab in settings.
I then typed a text message as fast as my fingers would allow and my Tilt did not miss any letters.

keyboard sensitivity?
I have a very strange issue with my keyboard. if i place my thumb over the P key and then hit the S key, i get a SP when i am trying to type a text message. There is also the same issue with the I and O keys and the X and Delete keys. It took me a couple of days to realize what exactly was going on but (unfortunately) i can reproduce the issue very easily. Is the keyboard supposed to be this sensitive or do you think i have a defective keyboard? I currently plan on replacing it but if i dont have to, i would rather not. I never had an issue like this on my 8125.
Thanks!

NotATreoFan said:
I was able to solve this issue by disabling the Suggest Words and Autocorrect options under the Input tab in settings.
I then typed a text message as fast as my fingers would allow and my Tilt did not miss any letters.
Click to expand...
Click to collapse
Doesn't really help. Using Dutty's Hybrid No 2 ROM produces the same results. Type a word and have the cursor at the last character of the word. Press space and a character in that order in rapid succession and you should be able to reproduce the outcome as easily as I can.

You have to go to the buttons option in settings. If you speed up the repeat speeds it WILL fix this issue. You have to play with it though because if you max it out it will end typing more repeat letters than you intended.

alaiwy said:
You have to go to the buttons option in settings. If you speed up the repeat speeds it WILL fix this issue. You have to play with it though because if you max it out it will end typing more repeat letters than you intended.
Click to expand...
Click to collapse
Tried this too. Same symptoms still exist. When you say speed up the repeat rate, are you talking about making the top bar go all the way to the left, and the bottom bar all the way to the right? I did this (though not putting them at the MAX, like two or three notches down).

klasikahl said:
Tried this too. Same symptoms still exist. When you say speed up the repeat rate, are you talking about making the top bar go all the way to the left, and the bottom bar all the way to the right? I did this (though not putting them at the MAX, like two or three notches down).
Click to expand...
Click to collapse
I'm with klasikahl on this: it does make things better but it does not make the problem disappear
Alaiwy, you will want to try the following, if you think that the problem is gone:
Type "WWW" or "AAA" fast without using the Caps lock but keeping the Shift key pressed instead. I'll bet you'll notice the problem again.
I'm really dying to know if this is a general issue or it's just some devices that were produced...

I am now beginning to think that this is a ROM-specific issue.
I flashed Sleuth's 1.1 ROM and to my joy, my space-character rearrangement problem has completely vanished. For the record, I was previously using Dutty's No 2.

klasikahl said:
I have a similar issue, but it's much more annoying IMO.
When I type fast, the spaces between words becomes really funky. If I hit the spacebar and then another character right after it, the character shows up on the screen before the space. It ends up looking like: Thisi s howa textm essagee nds upl ookingo nm yp hone.
There is definitely a problem with the phone reading input (and not my fingers). I sat there and pressed the same key and space in rapid succession for a few minutes trying to figure out the behavior. It seems like rapid input of space followed by character results in the output of the character followed by the space.
Click to expand...
Click to collapse
Same here...the problem that I was having was if I were to type "this is a test" I exprienced delays with my spacebar...it would spell out
"thisi sa t est". and it would do it EVERY single time. I uninstalled HTC Touch keyboard and keypad and it stopped. (Looks like TouchPal for me). However, on Dutty's Beta 1 I didn't experience this problem, but other WM6.1 roms I did. Of course with Dutty's I had to jump through hoops to get the keyboard and Touch Keypad to work cooperatively and maybe this "fixed" it...who knows. BTW I have the Tilt version of the Kaiser.

ajmoncrief said:
Same here...the problem that I was having was if I were to type "this is a test" I exprienced delays with my spacebar...it would spell out
"thisi sa t est". and it would do it EVERY single time. I uninstalled HTC Touch keyboard and keypad and it stopped. (Looks like TouchPal for me). However, on Dutty's Beta 1 I didn't experience this problem, but other WM6.1 roms I did. Of course with Dutty's I had to jump through hoops to get the keyboard and Touch Keypad to work cooperatively and maybe this "fixed" it...who knows. BTW I have the Tilt version of the Kaiser.
Click to expand...
Click to collapse
I haave had both problems but this one was more annoying. I had the space after the next letter problem mentioned above with Dutty's WM6.1 Beta. At first I thought I couldn't type, but once I uninstalled the xt9 cab that also fixed the Tilt's keyboard issue, this problem went away as well. The speed of the text all around seems faster now.
As far as the repeat letters issue, I have that as well, and haven't been able to get rid of it with any of the ROMs that I have tried.

I have the problem with the second letter of a double letter pair being occaisonally omitted. I have put the repeat rate at the highest setting and turned off autocomplete, etc., and still have the problem.
I have pondered this problem, and have a possible theory:
The hermes only had one switch under the space bar, but the kaiser has two. If you push one end of it and rock your finger you'll hear two clicks. About half the time I hit the space bar only one switch clicks, and the other half they both click. So clearly HTC must've compensated for this by putting something in the software that says if there are two spacebar entries within a certain (small) timeframe, ignore one of them.
Perhaps they did this and instead of making it spacebar specific, it applies to any character?
Just an idea...

I can't believe that HTC can ship what they call a high-end smartphone where a feature as basic as the keyboard working correctly isn't spotted during testing! Seriously considering sending my xda stellar back!

tilt keyboard problem

When i m typing on the keyboard sometimes when i hit the space bar and then a letter after it the letter goes first then the space. it happens many times and im wondering if theres a way to fix this. its like the space lags. im using dutty wm6.1

DISABLE XT9!

seriously...learn to search before posting...this has been covered a billion times

Sorry to re-birth this thread but the thing is, that's not the entire solution to this problem. I have this problem as well, and searched around for a while before finding anything useful. I have had XT9 disabled since day 1, and have had the same problem. Example...If I want to type...
Hello world, how is the weather today? Sometimes it would come out as...
Helo wrld, how i the wethr toay?
Pretty annoying. Even my g/f noticed it on my phone (at first I thought it was me being lazy, but I was wrong).
A solution that seemed to drastically improve this was changing the word completion settings. I now have suggestion after enter 3 letters (rather than a space), and suggest 2 words. I would recommend doing this (Start, Settings, Input, Word Completion). I would also recommend changing the delay before first repeat rate, and even the repeat rate a bit. Move the delay before first repeat rate all the way down to the shortest. (Start, Settings, Buttons, Up/Down Control).

MineralGray02K said:
Sorry to re-birth this thread but the thing is, that's not the entire solution to this problem. I have this problem as well, and searched around for a while before finding anything useful. I have had XT9 disabled since day 1, and have had the same problem. Example...If I want to type...
Hello world, how is the weather today? Sometimes it would come out as...
Helo wrld, how i the wethr toay?
Pretty annoying. Even my g/f noticed it on my phone (at first I thought it was me being lazy, but I was wrong).
A solution that seemed to drastically improve this was changing the word completion settings. I now have suggestion after enter 3 letters (rather than a space), and suggest 2 words. I would recommend doing this (Start, Settings, Input, Word Completion). I would also recommend changing the delay before first repeat rate, and even the repeat rate a bit. Move the delay before first repeat rate all the way down to the shortest. (Start, Settings, Buttons, Up/Down Control).
Click to expand...
Click to collapse
i have the same problem. glad to know im not the only one. Seems to have stopped for a while now after updating my radio and hardspl to 3.56 or so

MineralGray02K said:
Sorry to re-birth this thread but the thing is, that's not the entire solution to this problem. I have this problem as well, and searched around for a while before finding anything useful. I have had XT9 disabled since day 1, and have had the same problem. Example...If I want to type...
Hello world, how is the weather today? Sometimes it would come out as...
Helo wrld, how i the wethr toay?
Pretty annoying. Even my g/f noticed it on my phone (at first I thought it was me being lazy, but I was wrong).
A solution that seemed to drastically improve this was changing the word completion settings. I now have suggestion after enter 3 letters (rather than a space), and suggest 2 words. I would recommend doing this (Start, Settings, Input, Word Completion). I would also recommend changing the delay before first repeat rate, and even the repeat rate a bit. Move the delay before first repeat rate all the way down to the shortest. (Start, Settings, Buttons, Up/Down Control).
Click to expand...
Click to collapse
i also have this problem, only way i can get it to type right is if i just text SLOW and press every button slow and firm.

I'm pretty sure that this is just one of the negative things with the Kaiser. There has been plenty of complaints about the slide-out QWERTY buttons not being built very well. I noticed this immediately since my last phone was a Hermes, and the keyboard on my Hermes was ultra-awesome compared to my Kaiser's keyboard.

did you diable cleartype?
do a search on that i have had similar problems but disabling cleartype and keeping the inbox clean helps.......

This problem actually popped up for me a few weeks ago after I installed the HTC software keyboard. When I uninstalled the software keyboard, my spaces went back to normal. I then tried installing the PocketCM Keyboard, and the same thing happened. As soon as I uninstalled it, the problem went away. This could be limited to me. I know that everyone can't be having the same problem with these software keyboards or no one would be using them.
I did also adjust the T9 settings so that it only suggested words after 5 letters (I only use it for long words anyway). This did cut down on typing delay, but didn't fix the problem with the spaces ending up after the first letter of the next word.
I'm running the L26 Diamond V9 ROM, with the default Tilt radio.

SMS Message "Lag"? :/

Ive not tried searching for this problem, seems abit of an awkward thing to search so please dont shoot me
I've noticed for awhile now some times when im typing a text msg it'll work fine..... then it suddenly misses letters/key presses etc so my text message ends up
"Hey mate, how re yu oing?"... esspecially on words like "Little" i end up with "Litle" etc.
But going into Word / notepad etc it types no problems & other times i can do an SMS session with no problems then it'll suddenly act up, any idea why its doing this?
Im only using the kaisers default SMS program, maybe i should be using something abit better?

search for clear type in this forum you'll find your answer.

Ahh thanks, went to disable clear type ... damn things already disabled
*scratches head in confussion*
well ive enabled it, maybe that'll help lol

Blank2k2 said:
Ahh thanks, went to disable clear type ... damn things already disabled
*scratches head in confussion*
well ive enabled it, maybe that'll help lol
Click to expand...
Click to collapse
I haven't had any recent issues even with clear type enabled. A while back I did but now all is fine. My device appears to act funny at times. Just recently I lost all sound for almost 3 days, which was not a rom/radio compatibility issue.

redbandana said:
I haven't had any recent issues even with clear type enabled. A while back I did but now all is fine. My device appears to act funny at times. Just recently I lost all sound for almost 3 days, which was not a rom/radio compatibility issue.
Click to expand...
Click to collapse
Funny mine had just done this too, lost all sound for 2 days....

redbandana said:
I haven't had any recent issues even with clear type enabled. A while back I did but now all is fine. My device appears to act funny at times. Just recently I lost all sound for almost 3 days, which was not a rom/radio compatibility issue.
Click to expand...
Click to collapse
mine does weird things aswell, i use alarms alot... anyway i flashed my phone (so date was reset), my alarms werent going off, couldnt figure out why.
then relised the year was off & set the year correctly then the alarms started working, no idea what caused it to rely on the date.
now i think about it i guess "Monday 8am" would of been day differant day in 2005.... oki problem solved.
not very often that happens

Okay boys, here is the answer. There are two different functions you will have to modify. They are both under Settings>Buttons>Up Down Control.
Cleartype is only used for smoothing edges and has no affect on typing... btw.
Two different functions you will have to change are Lower the delay before first report to short, (far left) and Repeat rate to the slower side.
That helps on the lag issue you have been experiencing.
The second thing you should try is to disable predictive text.
Settings>Inputs>Word Completion
Try turning it off it helps a lot of people.
Have you flashed your rom or are you using the ATT one?
If you use the ATT one these problems will help, but the interface is still slow due to the bloatware on the phone. If you use a cooked rom the first thing should help as well as the second however, I am running a cooked rom L9 (laurentius) with no problems and I rarely miss type.
I have noticed one issue with my keyboard though that I cannot figure out and do not like, pressing the space bar and a number or letter before or after, the spacebar trumps the other buttons and many times I just see the space and no letter or number that I typed in close time proximity to the thing I was entering. Hope this helped.

Buggy damned Tilt official 6.1...

I've flashed my 8925 twice and hard reset it once, I've tried with and without having allowed the ATT customizations, and still there's a bunch of stupid little crap that is driving me nuts. Please note: these bugs are with no additional software installed.
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Missed calls / call log badly broken: I'll get the missed call notification but when I try to see the caller it shows the log as empty, and when I go into the log manually from the phone app it also shows empty--doesn't even have my outgoing calls.
Voicemail notification got stuck on. I can probably call ATT and have them fix this on their end in minutes but it's bloody annoying that my phone's been notifying me of a long deleted voicemail message for days.
Anybody else having any of these problems?
Anybody know a fix for any of them?
I've already tried advanced_configuration, no great help there.
What's the latest/best cooked ROM? I like that the official has stuff like Voice Command and Sprite Backup, would like to keep them...

I haven't noticed any of those problems. I have however had problems with the phone being really sluggish at times. Still testing with no apps installed. I don't have the backlight problem. I have just used the settings in Kaiser Tweak and everything is working. Not sure that I will keep using it though. I will probably go back to Hyperdragon's newest ROM's. Those always seem to work really well for me.

No issues with the official AT&T ROM either.

wmg76 said:
I have however had problems with the phone being really sluggish at times.
Click to expand...
Click to collapse
Are you using the right SPL?
I did not try the rom. But I heard cleartype w/ landscape problem still exist w/ this rom (like the official HTC 6.1 rom). It could be fix by replacing the ddi.dll but will probably break Opera mini 9.5.

Problems??? Pull up a chair! First I installed the ROM and none of my would work. I couldn't connect to the internet. I downloaded the ROM again and reflashed it. This time icons started disappearing on my phone. I did a soft reset. Nothing. Did a hard reset. Nothing. I reflashed. Loaded my apps, they actually worked. I set up my email, and I could connect to the internet. Great! Finally! One hour later, I got a phone call, but my phone didn't ring. Huh?Anyway, answered it, when the other party spoken it came out the speakerphone. I checked my device and there was no sound: ringtones,music games,alarms. Soft reset...Startup sound played..loaded up and no sound. Call ATT for a help, they decided to send me a replacement. Bad device, I guess. So I redownloaded the ROM and tried a different phone( i know, i know), can't get email to work, can't get MMetrics work. I quit!I will be going to custom ROM! I have a lot of reading to do.

Been using the new AT&T Rom since it was released and not having any issues. The only minor problem I have is that I'm seeing some compatibility issues with the version of S2U2 that I am using. Otherwise, good to go.

I don't get how people are having problems with this. Everything works flawlessly with me.
Except threaded messaging sucks, but with Kaiser Tweak, I turned it off.

I have had only 3 major issues with this rom.
1: Camera works, but doesn't show anything on the screen. I have a black screen, press the capture button, and I get a picture, but I can't tell what I am looking at until I take the picture. Working on this issue now. [Update] I just installed HTC Camera v5.04 b29195.00 http://rapidshare.com/files/99227062/HTC_Camera_v5.04_b29195.00__PPC_.CAB . Works Perfect now!
2. Battery life was HORRID! After 10 minutes I was down to 90%, while it sat on the desk, screen off, nothing running. After switching from 1.65.21.18 to 1.65.21.14, life was peachy. 8 hours with normal usage and only down to 80%.
3. Blue Tooth drops erratically. I connected my bt headset to the phone, made a call, after 10 or 15 minutes, it dropped the headset. BT stayed turn on, but headset couldn't be found. Turned off headset, turned back on, magically found. Haven't figured out what is causing this, but am researching that as well. OK, So I got on HTC's website to see if there was an update. There is no update for BT for the Tilt WM6.1. However, there is a fix for TYTN II WM6.0. http://www.htc.com/europe/SupportDownload.aspx?p_id=13&cat=0&dl_id=60. I decided to try this fix, installed thinking I would get the whole "this program was built for a previous version" garbage, but I didn't get that. Anyway, I am going to try this tomorrow when I make my calls. I will update if I notice it fixes my issues.
Otherwise, it's fast, good signal, good sound quality, etc. Overall I am pretty happy. Will be happier when I finally get the BT to stop dropping, as I travel a lot and it's illegal to talk on the phone w/o a hands free on any military installation.... Sorry if I didn't answer any problems others are having on this actual forum, but maybe someone else will be having the same issue and see my posts for my fixes. Thanks!

zip, zero, nada.......UI is faster, apps are faster, threaded SMS is really nice to have, MSVC works as advertised with my JB2.

Different Alarm Sounds!!
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?

eltrebor said:
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?
Click to expand...
Click to collapse
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.

I upgraded as soon as it was available and am seriously considering going back to the old WM6.0 ROM, which worked well. I have had several lockups and had to soft-reset. I have also had problems with calls. Once, it rang and shoed me the call, but wouldn't let me pick it up. Other times I have had echos. GPS lock time is also much longer. Oh, yes, the equalizer in TCPMP creates terrible distortion. It worked great in 6.0. And I am using the recompiled version.
It is great to get results of satisfaction with the new ROM, but I personally would like to know, for those who have been having problems and those, answers to some questions:
1 Which SPL
2 Which radio
3 Activesync or POP for email
4 Bloatware installed or not
5 PIE or other browser
I am sure that there are others, but those are what come to mind for the moment.

No Problems Here
FWIW, I think my Tilt is running much better with the new ROM. I've only had it (the new ROM) for a couple of days, but TT7 and Google Maps seem to run faster, and It seems to detect WIFI networks MUCH faster than with the old ROM. I'm a happy camper, at least for now.

I've noticed that its been alot slower and I don't like having a button devoted to the ringtone volume. The other HTC Tab I was using that was supposed to be an official use had Music allowing me to access Windows Media very easily now I can't. I also noticed my dialing pad is different and not the same as it was. I also don't like the threaded SMS on Windows Mobile it doesn't suit it. It makes it look very confusing and also I've noticed it has problems moving the screen upwards so that I can see what is being written in the space. Another thing I notice is randomly the HTC Home screen cuts itself off cutting off portions of the tab information. Its something to get used to but I don't see it happening cause I can't figure out what happened to some items on the phone like my GPS doesn't work, I am experiencing worse internet problems than before, Wifi dies frequently, and the dialer doesn't seem to work like it used to. Its a disappointment.

NotATreoFan said:
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.
Click to expand...
Click to collapse
Which key? I have been hunting... and no luck so far.

Backlight timeout linked to lock??
When I re-downloaded the software and re-flashed a *third* time things seemed to work better. The only thing I did differently was skip the 'setup a password' that last time I flashed.
The phone worked pretty well all weekend, and then this morning I finally put in owner info and set a pin password.
And I just noticed the backlight has started dimming after 10 seconds (or less) again. Restart didn't correct it, nor did changing the setting in advanced config so the screen doesn't dim for unlock screen.
For now I turned off lock and went into the backlight tab and it's stopped doing it. BLOODY ANNOYING. I've seen mention of the backlight timeout bug in other forums too...
Even while the phone was working well over the weekend I noticed that fairly often the first attempt to bring it out of standby flashes the screen on then it goes back off, comes on and stays on when I press power the second time.
I ran into the idiotic bug where text is white on white when in landscape mode, know I saw something about that being a cleartype bug or something and there being a fix, but why the hell would it be released like that?
Also, I can NOT get the 'message sent' notification to disable... does 'advanced config' not actually work?

Buggy is an understatement!
Having been unable to bear/ignore the bugs I reverted back to 6.0
Here's what I along with you guys have issues with.
1)Ringtones revert back to it's default tone whenever I open: Settings>Phone
2) Back-light reverts back to 10 seconds at random and often.
3) Google maps will not display letters when searching for places, but it'll invisibly type
4) Typical freezes on pages and things of that nature
5) Bloatware..

SeekerJBP said:
Which key? I have been hunting... and no luck so far.
Click to expand...
Click to collapse
I'll help you out here
Go into HKEY_CurrentUser --> ControlPanel --> Sounds --> FileSizeLimit ( it's a DWORD value)
Just delete the DWORD value, and bam, enjoy .
EDIT : wow, just realized this is my first post. I've been browsing the site since the Tilt came out, but I guess I've never found it necessary to post. haha!

TheCritic said:
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Click to expand...
Click to collapse
I have the exact same problem with my 8925. My work buddy across the hall does not have this problem with his 8925. Running WM6.0 my screen has ALWAYS dimmed at boot, as well as after a call ended; his has never done so. Now, after we've both upgraded to WM6.1, I have all my same problems, as well as the additional 10 second auto dimming that I did not encounter with WM6.0, he still has none.
No matter what settings I change, no matter if connected to power, USB, or none, my screen dims after 10 seconds. I can get it to temporarily revert back to the setting of my choice, by going into the settings and then back out, but if I manually dim the phone, get a call, or pretty much anything, it defaults back to the automatic 10 second dimming. I'm so pissed off about this. S2U2 also automatically kicks in on every screen dim, so I can't use it while the dim prob is going on. Certainly someone within this HUGE base of geniuses has a definitive answer for this.

Lots of little bugs in this release.
Google maps doesn't like it.
Can't get TCPMP to work.
Gets sluggish.
MSVC doesn't notify.
Other things I can't think of now.
Pretty irritating to say the least.

Problem with PocketShield

Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.

ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
Click to expand...
Click to collapse
Mine locks up when Gyrator2 tries to rotate the screen on incoming calls. Really annoying. I want to be able to rotate my screen in most programs, but it always seems to screw up my incoming calls and creates more lag...I'm gonna try to go back to sensorlock instead of pocketshield...
I will try to post it to the official forum as well.

ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
Click to expand...
Click to collapse
I had to same problem. I had Gyrator2 running which rotated the screen and screwed up Pocketshield screen.
I put an Event in Gyrator2 to disable rotation when in PShield screen.
The Event should be the same as Manila's except application/window title is "PShield"
That fix the problem.

i get odd issues as well
I agree, I get odd issues as well. I get the occassional hang, crash, missing bar etc. I uninstall pocketshield and I don't get issues. I'm using NATF 2.3 rom. I paid for it and it worked ok for a while until I noticed these intermittent problems...

wmserver said:
I had to same problem. I had Gyrator2 running which rotated the screen and screwed up Pocketshield screen.
I put an Event in Gyrator2 to disable rotation when in PShield screen.
The Event should be the same as Manila's except application/window title is "PShield"
That fix the problem.
Click to expand...
Click to collapse
I created a rule in Gyrator almost immediately after installing PS - I didn't want it to rotate the PS screen.
I left it up to Gyrator to get the window name and now my rule is set for the window #NETCF_AGL_BASE_.
But my problem is not in rotating, my problem is in unlocking (at least I think so). Anyway, will try to change the window name to PShield and see if it makes any difference.
EDIT
Nope it didn't. The top bar disappeared again during the first seconds of my testing :-(

ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
Click to expand...
Click to collapse
An updated version has now been released (9th Dec) to fix this problem...

rmjjjt said:
An updated version has now been released (9th Dec) to fix this problem...
Click to expand...
Click to collapse
Thank you my friend for letting me know. If this is indeed fixed I don't mind paying the $13. Will check it right now.

New version available today - but it's not working correctly. after I use the slide bars one time to ignore a call, every call after that is missing the slide bar (answer and ignore soft buttons are there though) and when caller hangs up before I take any action PS just sits there, like it's stuck. Sounds like the same problems you describe earlier.

Im using PocketShield, but I was wondering - the phone always locks after I insert the stylus (I have Touch HD), after a while PocketShield kicks in and after that if I want to unlock the device, I first have to unlock the "normal" lock and then the PocketShield. Really annying.
Is there a way to disable the lock after stylus insertion?

chetlet said:
New version available today - but it's not working correctly. after I use the slide bars one time to ignore a call, every call after that is missing the slide bar (answer and ignore soft buttons are there though) and when caller hangs up before I take any action PS just sits there, like it's stuck. Sounds like the same problems you describe earlier.
Click to expand...
Click to collapse
actually i just experience this an hour ago.. also every time I slide the keyboard to unlock my Fuze the screen freezes on the landscape mode. all keys on the keyboard besides the windows key. I hope they fix these bugs right away..

I have the same problem with the top bar disappearing. I'm not running Gyrator or anything like that. I'll try a new version when the bugs mentioned have been ironed out. It is a great product though. I do like it.

Are any of these being posted in the PocketSheild forum? They need to know the bugs.

cheez said:
Are any of these being posted in the PocketSheild forum? They need to know the bugs.
Click to expand...
Click to collapse
yes many people posted on the pocketshield forums with same issues...

i dont know if anyone else is having this issue... but
i seems that when slide to answer is activated PSPP some calls get answered automatically... and it takes me to the "talking" screen immediately.
any help on this issue would be super!

I'm having other issues with PocketShield. I didn't have this same problem with version 2.0.6.3, but with version 2.1 I started to have problems with my alarm notification. When the alarm goes off, it just quickly vibrates once and just stops if it's in a locked state. Also, I noticed a heavy battery drain issue--the battery charge would drop about 10% each hour. Once I uninstalled it, the problems with the alarm and battery drain stopped.

Even with the new version (2.1.0.1) I still have problems answering phone calls. I'll slide to answer and the phone just keeps ringing. I hit the "Send" key and nothing happens. I hit the "Answer" soft key and still nothing....
Anyone else still see these problems?

I have a different issue, when phone is not locked and I have an incoming phone call, pocket shield kicks in and shows me "lock screen" where I have to slide to unlock the device and only then I get the standard "Incoming call" screen...
v2.1.0.1

Major Problems
Well I was gonna pay for it but their payment server seems to be phishing site. Also it crashed SQB and when I uninstalled it, the program removed my outlook email account. Sorry but looks like malicious program so going back to an old sensor lock. I did like the software interface but Paypal confirmed me, so I shouldn't need to give you my personal information to pay for the software. No shipping means I am not giving you my phone number and address, etc. Sorry too many questionable things going on for a screen lock... rule is KISS and since this programmer isn't doing that then dump it off my device is my rule.

Neo_ said:
I have a different issue, when phone is not locked and I have an incoming phone call, pocket shield kicks in and shows me "lock screen" where I have to slide to unlock the device and only then I get the standard "Incoming call" screen...
v2.1.0.1
Click to expand...
Click to collapse
version 2.1.0.4 is out and is supposed to fix that problem..

I ran the site and its fine why do you say its a phishing site?