Proxy Enable/Disable - Tilt, TyTN II, MDA Vario III General

In VPG's 8525 ROMs he included a folder in Programs to Enable and Disable the Proxy (so that one could easily use WiFi instead of GPRS).
I found cabs for restore hidden proxy and remove hidden proxy, thinking those were the same. However after installing the cabs, I can't find them anywhere on my Tilt.
Does anyone know how to make them visible or where they might have gone to or especially how to create a new folder in programs to install them to

Proxy Cab
I am not sure about it working for the Tilt and am actually looking for the cab for proxy settings for my 8525. Do you think you could attach them for me? Or even better attach the link where you found it. Thanks.

I'm bringing this back to life because I've got the same problem.
I wiped all the ATT crap off of my Tilt. Then it seemed that the proxy was still enabled, so I downloaded the cabs here for remove/restore hidden proxy. The problem is, after I installed the cabs, I can't find where to launch the programs from.
Any help?

Installing the enable Cab file enables the hidden proxy.
Installing the disable Cab file disables the hidden proxy.
There is no program installed.

haha, I feel retarded for asking that... I just opened the cab and looked in the XML and realized that the cabs are just registry changes.
Thanks for the reply tho!

Okay, dumb question. I have both enable proxy, and disable proxy in my Windows directory. Is there a way I can add these to HTC Home, so I will have a quick easy way to use them? I also have SPB Pocket Plus, is there a way to add it there?
Thanks!

Hi, where can i get this for my wizard? thanks!

Explain.
Hi I have AT&T Tilt.
I accidentaly activated "Disable Proxy" CAB, and it said it was installed succesfully.
Can anyone explain for what is used Disable and Restore Proxy?
What is its function in my phone and what does that have to do with Tom Tom?

udgn said:
Hi I have AT&T Tilt.
I accidentaly activated "Disable Proxy" CAB, and it said it was installed succesfully.
Can anyone explain for what is used Disable and Restore Proxy?
What is its function in my phone and what does that have to do with Tom Tom?
Click to expand...
Click to collapse
Has nothing to do with Tomtom. If you enable the proxy, you shouldn't be on wifi but rather ATT's network. The proxy is used to access some stuff off the ATT network, not wifi.

Related

How can I stop att unlimited from sending my internet connetion to being mobile

I need access to a direct ftp port with the http://65988.0023.XXX style connection but I can't get access to it unless I am using WIFI? what setting can I change to stop this?
try disabling the proxy settings, sometimes bypassing your networks proxy settings will open up all sorts of options you where once blocked from accessing
how would I go about that? I didn't know I was behind proxy settings? And do I need them to access medianet?
in your connection settings go to manage existing connection, select proxy settings and untick the box that says this network uses a proxy server to connect to the internet and leave the box ticked that says this network connects tothe internet.
Ive disables my proxy settings for t-mobile Uk internet settings and now it connects alot faster and pages seem to be loading faster also
doesn't work... Darn this sux... I test it with www.msn.com and it still makes it pull up msn.mobile... how annyoing...
bump anyone have anything on this?
I would really appreciate help with this because I have to access a program that I can't otherwise.
If you're looking to hit an FTP site, then I'd grab an FTP client for WM and stop futzing with IE in the first place. Or am I misunderstanding what you're doing?
not it is not an ftp it is an http://112.2232.224:2324 type of site... that is all.
Don't know your carrier but here's a cab that disables the "hidden" proxy in AT&T and one that restores it. Worth a try?
RemE said:
Don't know your carrier but here's a cab that disables the "hidden" proxy in AT&T and one that restores it. Worth a try?
Click to expand...
Click to collapse
i have att... thanks trying now...
RemE said:
Don't know your carrier but here's a cab that disables the "hidden" proxy in AT&T and one that restores it. Worth a try?
Click to expand...
Click to collapse
YEAAAAAAAAAAA I don't know what happened... but since I installed your thing it works perfect. damn I was getting peaved... when I go to msn.com thought it still brings up msn.mobile though. Well at least I can go to anywebsite I want now.
Do I ever need to put the proxies back? I guess I should just put this on my card just in case.
Again, Thanks... What else am I able to do now?
In the Tilt, Internet Explorer's user agent string is locked to mobile internet, meaning that websites will see your device as a mobile device. If the site has a mobile site, it will automatically re-direct you to that. In WM5 devices, you could use software to change IE's user agent string to make it look like a desktop, but on the Tilt, you can't.
You'll need to get Opera Mobile if you want the internet to see your phone as a desktop.
I think for what your trying to do you need to use the MY ISP settings instead of medianet settings. But I don't know what they are anymore. I think you will also need the right data plan to use them.
does PIEPlus User Agent setting work with Tilt?
stpete111 said:
In the Tilt, Internet Explorer's user agent string is locked to mobile internet, meaning that websites will see your device as a mobile device. If the site has a mobile site, it will automatically re-direct you to that. In WM5 devices, you could use software to change IE's user agent string to make it look like a desktop, but on the Tilt, you can't. . .
Click to expand...
Click to collapse
Is this true even if using PIEPlus? PIEPlus Tools>Options Plus>User Agent allows setting User Agent to IE 5.5 or IE 6.0 (which should be seen by websites as a regular computer) in addition to the default PIE setting (which is seen as mobile)
cushcalc said:
Is this true even if using PIEPlus? PIEPlus Tools>Options Plus>User Agent allows setting User Agent to IE 5.5 or IE 6.0 (which should be seen by websites as a regular computer) in addition to the default PIE setting (which is seen as mobile)
Click to expand...
Click to collapse
what is pie plus. First off, I tried using opera mobile desktop setting and when I went to www.msn.com it still comes up as mobile. Do I have to configure something further?
Lastly, I just told you all that the program for turning off the hidden proxies worked. So for what I was trying to do those programs the other person posted worked nicely. However, it still sucks that I can't bypass the mobile crap... There is a program called deepfish from microsoft that addresses the issue exactly, however the jerks won't let the beta out any further. I am gonna aaddress that issue in another post.
I believe the problem is something in the WM6 or the Tilt itself because Opera doesn't work either.
Boy I'm glad you guys worked on this. I upgraded to Tilt yesterday and was cracking my head against the wall trying to figure out why the HTTP addresses wouldn't resolve with the same settings I've been using in my 8525. @#$%#@ Hidden Proxy! lol
Cheers and Happy New Year!
christian15213 said:
what is pie plus. First off, I tried using opera mobile desktop setting and when I went to www.msn.com it still comes up as mobile. Do I have to configure something further?
Lastly, I just told you all that the program for turning off the hidden proxies worked. So for what I was trying to do those programs the other person posted worked nicely. However, it still sucks that I can't bypass the mobile crap... There is a program called deepfish from microsoft that addresses the issue exactly, however the jerks won't let the beta out any further. I am gonna aaddress that issue in another post.
I believe the problem is something in the WM6 or the Tilt itself because Opera doesn't work either.
Click to expand...
Click to collapse
In Opera Mobile go to Menu>Tools>Settings then change Identify as from Handheld device to Desktop computer.

Media Mall on non AT&T ROM?

I just upgraded my Tilt to Dutty's wm6.1, and I was wondering if there is something that I can do to make it so I can purchase things from MEdia Mall from AT&T. There are a couple of things that I need to get from there, and now it won't let me...says "we're sorry, your device is not supported for purchases on the MEdia Mall".
I know on Motorola phones you can add the Cingular certs to a folder (at least in the older p2k phones), which re-enables access to purchasing. Is there something like this that we can do to Tilts with an upgrade ROM? A cab we can install or a registry edit? I'm assuming we just need to do something that AT&T sees it as a Tilt and not an unknown phone.
I searched, but didn't see anything on this subject.
i've been looking for the same thing. I'll see if i could point you in the right direction. I remember reading something a while back about RestoreProxy and Disable Proxy.. maybe you want to restore the proxy to get it to work. Do a search in google because the search feature in this forum never find anything for some reason. Google. Restore Proxy Kaiser in google you should find someting
Well, you have to go through the proxy to even connect to the MediaNet homepage.
My sig! Look at it .
There is also an option in KaiserTweak to change how your device identifies itself to websites. Try changing the setting to AT&T Tilt. Combine that with the AT&T hidden proxy, and you should be good to go.
NotATreoFan said:
There is also an option in KaiserTweak to change how your device identifies itself to websites. Try changing the setting to AT&T Tilt. Combine that with the AT&T hidden proxy, and you should be good to go.
Click to expand...
Click to collapse
I could get on with either one. I did it before.

ATT Settings.cab

I have a file called ATT Settings.cab which I got from this forum (somewhere, can't remember where). It is supposed to set the phone to ATT US connection settings. I have installed it (i.e. clicked on the cab file), but can't find where the icon is to start it (I'm expecting menu settings, etc.) Has anyone used this before and if so where do I look to run this program?
I haven't used this cab before, but I have to assume all it does is automatically enter the browser settings. Like the ones you would find here. You won't find an installed program for you to run.
it's automatically installed.
its not an application, it changes settings. some roms it may be just install the cab and your good to go, but in others such as L26 diamond you have to go settings>connections(tab)>connections(icon)>advanced(tab)> select networks> change both to mediaNet then edit>proxy settings> uncheck this network uses a proxy server...
fjc3 said:
its not an application, it changes settings. some roms it may be just install the cab and your good to go, but in others such as L26 diamond you have to go settings>connections(tab)>connections(icon)>advanced(tab)> select networks> change both to mediaNet then edit>proxy settings> uncheck this network uses a proxy server...
Click to expand...
Click to collapse
well after you install att settings cab and follow these operations you may as well install removehiddenproxy.cab because attsettings.cab doesn't remove the hidden proxy. The hidden proxy can prevent you from downloading quickgps, htc weather updates, and a few other things.

Essential processes for AT&T Tilt Users after each rom flash

Essential processes for AT&T Tilt Users after each rom flash
I know this has been mentioned thousands of times throughout this forum yet n00bs often need assistance fixing their hardware keyboards, email, HTC weather, quick gps, and so on after they flash a new rom for the first time.
While hanging out in Bansville for a couple of days I realized I have been answering the same questions continuously. This is a mini text tutorial, which offers simple fixes for imperative AT&T settings.
So you installed a version of hardspl, flashed a new rom, and performed a hard reset. What next? Well primarily in all probability, you want to make sure the clock settings are in am and pm format and the date is set to m/d/y. To change your clock settings follow this navigation
Start>settings>system>regional settings>time tab>time style drop down set to h:mm:ss tt
To change your date setting:
Start>settings>system>regional setting>date tab> select the date style of your choosing and select ok.
Next, I like to restore my files such as my appointments, contacts, text messages, etc. I personally prefer to use PimBackup. Below is a .zip file for PPCPimBackup. It is an uncomplicated program to use and a lecture is unnecessary to navigate throughout this application, as it is straightforward.
After I restore my files, it is time to inaugurate the Tilt keyboard fix, which repairs your slide-out QWERTY keys to be mapped correctly. For example, without this fix Fn+W will appear as ! opposed to @. Below is the cab file you need to install to remap the keys appropriately. Following the installation of this cab file, perform a soft reset.
The next thing I usually do is correct my connection settings. First, I install ATT_Settings.cab, which you can find below. Then I navigate to the following:
Start>settings>connections>connections>select the advanced tab>select networks>Change both drop downs to Media Net> select edit on both drop downs>proxy settings tab>uncheck everything for both media nets that you changed>then hit ok or x when you are finished.
At this time, I set up my email. However, remember NOT to save your password, you will do this in the following step. If you are using HTC HOME, most likely you are, select the little envelope and create a new account. You can find your email settings by using google if you are using pop3 or whatever.
Next, after I set up my email without saving the password, I install removehiddenproxy.cab, which you can find below. This cab file is important as it allows your pop3 email account’s password to save without adding extra characters, allows for your quickgps to function properly each time, and it also allows you to use HTC Home Weather without getting a connection failure. So install this cab then go back to the email you just set up, edit the account setup, enter your password, and save it. Now, go back to your today screen and tap your weather tab. Now tap Select City and select your city (*Note there are a few patches available to select your town if you do not live in a big city). Anyhow, notice the menu button where your right softkey is, select menu and turn your temperature scale to Fahrenheit and select done.
I suggest setting up your WiFi at this time too.
Well this is my mini tutorial for a basic setup on your AT&T Tilt after you flash a new rom.
Have Fun Flashing and Take Care.
*Special thanks to the creators of these cab files and JimmyMcgee for teaching me the basics.
Am I missing something too?
Is there something to do regarding getting a reasonable GPS fix after flashing newer 6.1 roms or is it a known problem. I keep flashing down to older 6.0 roms with 1.27.14.09 radio because of the faster GPS fix. I would love to use the newer roms but GPS fix time is a deal breaker for me. To save you some time I use SPL 3.28 with 6.0 roms and 3.56 with 6.1 roms. I bounce between Q-mobile and RomEos roms now that we lost dutty. Ive tried all the newer radios and personally they all stink for GPS. Sorry about your brief ban and welcome back, I need your wisdom
*cough* sticky
AWESOME. I keep saying I need to: Start fresh, get NetCF 3.5, get a light rom. But it all seems so complicated to go from current configuration to start over completely, but this will help a lot! Thanks! Now to find the time and the 'right' ROM.
Thanks very much for the reminders, and for the CABs. I flashed my first 6.1 ROM last night, and forgot all about the hidden proxy!
I agree that this really needs to be a sticky...
This is a good tutorial, but here is a good side note to add.
By removing the hidden proxy (which ya do with the removehiddenproxy cab), Tilt users won't be able to get to media net (http://device.home or http://home) or cingular video as the hidden proxy is needed for those.
Then they should just use the Restore Proxy, and that will allow MEdiaNet.
Proxy Manager has both in it.
myteematt said:
Ive tried all the newer radios and personally they all stink for GPS. Sorry about your brief ban and welcome back, I need your wisdom
Click to expand...
Click to collapse
Did you try 1.71.09.01 ? http://forum.xda-developers.com/showthread.php?t=410953
Been having the same issue and finally I think got a break. Tried about 10 SR's and the lock times are steady inside the house.
BTW using DK2
does windows mobile have a localhost file like windows? would remapping those to their needed servers allow the bypassing of the proxy?
mbarvian said:
*cough* sticky
Click to expand...
Click to collapse
+1.
Nice tutorial
I downloaded your PPCPimBackup zip file but when I attempted to open it I received the following prompt: "The central directory was not located . . ." etc.
Thanks for the post BTW. Very helpful and informative.
the Dragon said:
I downloaded your PPCPimBackup zip file but when I attempted to open it I received the following prompt: "The central directory was not located . . ." etc.
Thanks for the post BTW. Very helpful and informative.
Click to expand...
Click to collapse
you were unable to open the zip file? I'll check it out and reupload it if necessary.
edit: works ok here my friend. Unzip the file to your desktop and move it to your storage card then run the program hopefully it works for you.
myteematt said:
Is there something to do regarding getting a reasonable GPS fix after flashing newer 6.1 roms or is it a known problem. I keep flashing down to older 6.0 roms with 1.27.14.09 radio because of the faster GPS fix. I would love to use the newer roms but GPS fix time is a deal breaker for me. To save you some time I use SPL 3.28 with 6.0 roms and 3.56 with 6.1 roms. I bounce between Q-mobile and RomEos roms now that we lost dutty. Ive tried all the newer radios and personally they all stink for GPS. Sorry about your brief ban and welcome back, I need your wisdom
Click to expand...
Click to collapse
I deserved the brief ban.
Anyhow, I noticed that when running 6.1 roms with the Tilt you need an application such as HTC GPS Tool or GPS Test, to open your internal gps, prior to opening your GPS Software.
These are the steps I use to utilize a GPS Fix after each soft reset:
1) download latest updates for quickgps
2) Open GPS Tool>com 4>baud 4800>Hot Start>Then click Open and wait like 30 seconds
3) Open TT7
*If you fail to get a fix after following these steps close all programs and repeat. Eventually you should be getting fixes within seconds.
I've attached GPS Tool for you, good luck.
What exactly does the remove hidden proxy cab do on AT&T Tilts? If you go into your connection settings and uncheck the proxy server- is that the same thing or something different than the cab file does?
Hey Red,
I attached an ATT settings cab which does not enable the proxy by default, and also enableds creation mode in MMS settings. I thought it might be helpful for your thread here. Also, it may seem too advanced for beginners, but i have a thread started here:
http://forum.xda-developers.com/showthread.php?t=418468
This has a step by step guide to how to create an xml file using Schap's Advanced Config 3.0, which can be used to provision all of your advanced config preferences during your UC setup. This tool has really made it very easy to do reduce the amount of work that goes into flashing.
I also attached a cab for total commander, a free, more full featured file explorer; gps test, another gps tool; and advanced config 3.0. Hope it helps.
Thanks... this is a great thread!!!
SaltyDawg said:
What exactly does the remove hidden proxy cab do on AT&T Tilts? If you go into your connection settings and uncheck the proxy server- is that the same thing or something different than the cab file does?
Click to expand...
Click to collapse
/bump
I'd really like to know this too!
Why would anyone ever want the proxy checked? Does it do something for you to have it checked?
sinning said:
/bump
I'd really like to know this too!
Click to expand...
Click to collapse
It removes a HIDDEN proxy, one that you can't remove without a cab. Without it enabled you can't connect to medianet home, and some other things. Most users like to disable it for a myriad of reasons, one of which is that it causes you to be unable to browse while connected to your laptop.
The box that you check in connections is a separate issue, and i think that is actually just old settings, i'm not sure, since even on the AT&T website it tells you no not to have that checked.
scotchua said:
It removes a HIDDEN proxy, one that you can't remove without a cab. Without it enabled you can't connect to medianet home, and some other things. Most users like to disable it for a myriad of reasons, one of which is that it causes you to be unable to browse while connected to your laptop.
The box that you check in connections is a separate issue, and i think that is actually just old settings, i'm not sure, since even on the AT&T website it tells you no not to have that checked.
Click to expand...
Click to collapse
Awesome. So, if I run the cab and remove the hidden proxy- can I then tether my laptop (connect to the net using the Tilt's data)- without getting caught by AT&T? Or is there more to tethering without getting caught?

AT&T Tilt internet not working after bloatware removal.

hi all...i am having a strange problem. in order to remvoe the bloatware i cleared my storage memory in phone and then did a soft reset in the beginning to avoid bloatware installation. everything went fine, but now i am not able to access internet through any browser. but at the same time all the apps which access internet directly are able to access properly. please let me know what i need to do now
this might have something to do with the AT&T proxies. search for that on xda. i saw a thread somewhere with a cab for the proxy posted.
EDIT: you can find it here
<insertwittyusernamehere> said:
this might have something to do with the AT&T proxies. search for that on xda. i saw a thread somewhere with a cab for the proxy posted.
Click to expand...
Click to collapse
I tried that and even then its not working. by the way i am using the 6.1 stock ROM.
ummm... i'm stumped. how about a hard reset?
doesnt part of the bloatware configure the settings for internet access? have you checked those out? Start, settings, connections, connections...check that out, see if it's blank. There's a cab out there that autoconfigs for at&t settings (credit to creator) or the settings are all over the internet.
rx7freak said:
doesnt part of the bloatware configure the settings for internet access? have you checked those out? Start, settings, connections, connections...check that out, see if it's blank. There's a cab out there that autoconfigs for at&t settings (credit to creator) or the settings are all over the internet.
Click to expand...
Click to collapse
Do i need to have these settings configured even to access through wifi?

Categories

Resources