my eten x800 is sick, it turns on but doesn't go over eten's main screen or blank white screen ,hard reset method is disabled aswell,can get into modules test mode but no use for me? don't know how to get into bootloader mode yet,any suggestions? (apart from throw in bin or send back to vender )
edited:
its all good now.cheers
Related
HI can any one help me pls. i cracked screen on my xda11s and decided to replace it , wich i did , but now the screen is stuck on white screen,i have tried hard reset and soft reset, when i turn on u can hear the ping noise, as if it is going to align ment screen, and when i do presss the record and power buttons, it makes asound but nothing still the white sceern, when i try to run mtty it goess to usb but then client, comes up 4 times and cannt do aanything ,ia hvae tryed all i can, can anyone pls help me, i wuold really appresicate anyones help, thankyou.
Hi,
I tried to unlock my ATT 8925 and looks like I screwed it royally Now the tri band color also dont apear! It is all black screen. If I press camera button and then do a soft boot (reset) then I can see the power light. Please help!
if you go the wiki page for this device it might help you out, or try searching google
shuman said:
Hi,
I tried to unlock my ATT 8925 and looks like I screwed it royally Now the tri band color also dont apear! It is all black screen. If I press camera button and then do a soft boot (reset) then I can see the power light. Please help!
Click to expand...
Click to collapse
try contacting GSLEON or Jockyw2001
Go here http://forum.xda-developers.com/showthread.php?t=393337 , download attached files and start from step 4
what kind rom are you using if its 6.0 then theres the problem flash to a 6.1 rom
How do I fix the rom 6.1? It is total dead seemz, not even power light! any help is much appreciated.
Did you try bootloader mode? Power+Camera+Soft reset button?
Kraize
I dont belive I tried the boot loader mode. I'll do that, however, what should I see if go into bootloader mode? what is the next step. Thanks everyone for their help, much appreciated.
No luck, I tried bootloader mode, same thing, all i get green power light and black screen!
your phone is in oemsbl, you erased everything. if you follow what i said in my previous post(#4) you can fix it.
Hey,
any help with a Tri-colour screen problem?
other thing is, i can't tell where to read your reply from
Jerry
Hey,
can anyone help me with AT&T 8925 Tri-colour screen problem?
msn please @ [email protected] because I have no idea how to read the reply to this post, I'm new to all this..
It froze one day, soft reset and it came back in tri-screen. I plugged it into the charger and it worked..
Did that a few times now it won't do anything and it is stuck in tri-colour with:
KAIS1*0
SPL-1.93.000
CPLD-8
i didn't instal anything, it just locked up and not nothing I do, soft or hard reset will make it come back.
I also wanted to install an Australian OS to Telstra maybe, but not sure which ROM or RUU to download.
Can anyone help please, this is extremly important... and donations will be paid on completion of problem.
Thanks
jasonrush said:
your phone is in oemsbl, you erased everything. if you follow what i said in my previous post(#4) you can fix it.
Click to expand...
Click to collapse
what if set can't conect with mtty and no conectivity with the pc and only green lights on the set?????
i have an att tilt and i was trying to unlock it and it got bricked. it will cut on and everything but it doesnt make the swoosh sound when it gets to the white att 3g screen. after that screen it goes completely black and i cant do anything. iv tried the soft reset and it works perfectly fine, the touch screen and everything works great and it goes to the try screen but when ever i try to connect it it doesnt say usb, it says serial. i need any help you can give me its just been sitting here for about three month and i need to unlock it.
please help.
montreezy said:
i have an att tilt and i was trying to unlock it and it got bricked. it will cut on and everything but it doesnt make the swoosh sound when it gets to the white att 3g screen. after that screen it goes completely black and i cant do anything. iv tried the soft reset and it works perfectly fine, the touch screen and everything works great and it goes to the try screen but when ever i try to connect it it doesnt say usb, it says serial. i need any help you can give me its just been sitting here for about three month and i need to unlock it.
please help.
Click to expand...
Click to collapse
Try following all these steps.
http://forum.xda-developers.com/showthread.php?t=433835
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
I think you have a hardware problem
Maybe the flex
maybe the microcontroler
maybe the rom Try a new again instead the one you have
for skip this screen alignment try to search on the forum there are many ways
I simply conect it to activesync even if it is stucked at this screen it syncs with your pc via activesync... then go to explore...Windows folder.... startup... and delete the file called welcome.lnk then softreset.
Yeah my wizard is stuck to @ tab the screen etc.
I can't connect to activesync becuase activesync does not detect the phone.
Nevermind!
tnt929 said:
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
Click to expand...
Click to collapse
Try to replace a new battery, i have the same problem be4. And i discovered the battery is bulked. So I go to buy a new one, and problem is gone now.
still stuck
I have the same problem, i tried looking through explorer but i couldnt find the file to delete so that i could bypass this startup. If anyone figured anything out let me know please.
[email protected]
thanks!
1. Do a soft reset. (small hole on the right side)
2. When screen is black hold camera button, this will boot into bootloader
3. Connect USB cable (USB will show over left softkey)
4. Try to flash a new ROM.
I did this process a few times with different roms.. the best I had was using the HardSPL process, and then the NBD_v8.3_8MB rom.
Hi, I'm new to XDA Dveloper. sorry if its already questioned..I don't have time to search for them, I'm running my laptop on battery that only will last about 15 minutes..and I have my electricity out..
Yesterday, I got My diamond exposed to water...it was raining hard and I was on my bike with my diamond in my pocket..
when I got home, my diamond begin to act strangely, it keeps lower its volume(to vibrate state) when I try to press the increase volume rocker, it goes back down to vibrate. but I manage to shut it down with slide2shutdown...and charge it (the battery only 7% left). this morning I get up and switch on the diamond, but It doesn't boot like usual(theTOUCHDiamond sceen)...
it only shows 4 bars (RED, GREEN, BLUE, and WHITE)consist of:
RED BAR with this:
DIAM100 64M
SPL-1.37.Olinex
MicroP-Diam (LED) v11
GREEN Bar with:
PSOC-Diam Stage_PVT v0x30
BLUE Bar : blank
WHITE Bar with
Serial (only "serial is written, nothing more)
That all, and when I try to connect with USB cable, it demands Qualcomm CDMA Drivers...(I use My friend's laptop....no activesync installed)
anyhelp would be appreciated.
thanks
Its strange..., Now my phone could boot normally, but the volume control still error..it keep decreasing( i tried to increase it but it keep getting back to 'vibrate' is this becaus the water?
EDIT: I'm sorry...its still the same, if I restart the device..it shows the 4 colored bars screen again. when I try to reset it, 1 of 10 attempts is likely that diamond boot normally..but the volume error is still there...can sum1 help me?
PS: Sorry, I don't know that I could edit my post..
bellsprout said:
Its strange..., Now my phone could boot normally, but the volume control still error..it keep decreasing( i tried to increase it but it keep getting back to 'vibrate' is this becaus the water?
EDIT: I'm sorry...its still the same, if I restart the device..it shows the 4 colored bars screen again. when I try to reset it, 1 of 10 attempts is likely that diamond boot normally..but the volume error is still there...can sum1 help me?
PS: Sorry, I don't know that I could edit my post..
Click to expand...
Click to collapse
what are you trying to hardreset device..??
A hard reset should only be performed if a normal reset does not solve a system
problem. After a hard reset, the device is restored to its default settings—
the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.
Try flashing back to stock rom?
Sent from my GT-P1000 using XDA App
Hi!
I have a boot problem also.
I used Memo ROM about 1 month ago. That was worked well still today. I restarted my Diamond today, it was not boot correctly. Only reboot the phone after showing the ROM information. I made hard reset and put back the rom again, but the phone is not boot properly.
Could to help somebody for me?
I solved the problem.
I downloaded the original rom (included with radio rom) from htc.com.
I put the phone to bootloader mode and flashed this original ROM.
After flashing finished, my diamond boot to WM6.1.
I don't know what was the problem, but it works again...
I hope never happening this again!
this is just my own fix ...your problem may be differant
symptoms; phone turns of and on in loop mode
you get an error in zune update
you cant hard rest
phone is stuck on first screen
you cant get into tri color mode
well what i found was my camera button was stuck
all i did was get some jewllers small screw driver and pulled up so the button was level and that was it for me
i ended up haveing tmoble under insurance send me a new phone then iwas to send back the hd7
hell no...they sent me the new htc radar which is a nice phone
volume is way higher the graphics and color is much more viberant and crisp
but you cant flash it or sideload apps..your stuck with what they give you
so ill keep that for emergency
i hope i helped
well what i found was my camera button was stuck
you cant get into tri color mode
I get an error in zune update
no problem
well what i found was my camera button was stuck
Life saver