Hi. I've recently noticed, that my K isn't ringing on any incoming calls. If i choose vibra alert, everything is ok, K is vibrating. If i select normal, it just pops the "incoming call" window, but without ringtone. So... whats the solution?
HCKU/ControlPanel/SoundCategories/Ring
there's a key named InitVol. For some reason it set itself to 0. At the moment I've set it to 1 - no soft-reset needed ! - the problem wanished and K is again ringing!
I'm just curious, what is creating such a bug... Any ideas
thnx for sharing
Many, many, many thx! I just went crazy until I found this!
So, great thanks from Bad Nauheim, Germany
Holger
Related
Hi all,
Running my Orange UK (unlocked and on T-mobile) with Duttys 6.1 ROM and radio 1.64.08.21 and seem to have an issue when answering incoming calls.
I'm sure I've seen this reported elsewhere but can't find it for the life of me now!
When I recieve an incoming call and press the green answer button, there is about a 2 second delay before the call is connected. If you're not quick, TM voicemail takes the call. Seems to be a second of ringing on the calling handset before it starts ringing on the TYTN 2 as well.
Can someone confirm that I have seen this reported elsewhere and post a link or suggest if this is a ROM issue, radio issue or general Kaiser issue?
Only kept the orange rom for about 48 hours and went straight to Duttys so cant really recall if it happened on the orange rom.
Many thanks guys!
Not exactly the same problem, but I have a similar issue on my Tilt with my bluetooth headset. I press the headset button to answer and don't hear anything for about 1.5 seconds. Usually, the person calling is saying "hello? hello?" by the time I actually get connected.
The headset (Plantronics 510) works great for everything else.
Have you tried the following. I've seen this help some people including myself.
Start > Settings > Phone > Services Tab .. Highlight Call Forwarding and hit Get Settings ..
Forward phone calls only if: Forward After: there is a drop down box that some providers allow you to set the time before the call goes to viocemail. (5, 10, 15, 20, 25 and 30 seconds) .. I think default was 20 on my phone/provider.
If your network provider doesn't allow changes from your phone you might have to call their customer service and request they manually change the network settings for you.
Same problem here as well! Same Rom (Dutty's), same network (Orange).
And I've only flashed last week and was on the standard Orange Rom before and there wasn't a delay. Any help is appreciated as this is a right pain.
I've changed to 30 seconds before diverting to the answerphone - so thanks for that response at least.
PsyOpWarlord said:
Have you tried the following. I've seen this help some people including myself.
Start > Settings > Phone > Services Tab .. Highlight Call Forwarding and hit Get Settings ..
Forward phone calls only if: Forward After: there is a drop down box that some providers allow you to set the time before the call goes to viocemail. (5, 10, 15, 20, 25 and 30 seconds) .. I think default was 20 on my phone/provider.
If your network provider doesn't allow changes from your phone you might have to call their customer service and request they manually change the network settings for you.
Click to expand...
Click to collapse
Had no idea that screen was there... Thanks! I've changed my call forward to 25 seconds, 'cause I had always felt it was going to vms too quickly.
Gavin
I had this issue myself with Dutty's V4 RTM (WM 6.0) rom. Pressing the Green button would result in a 2 second delay in being able to answer the phone, but if I used the left soft key to answer, there was no delay.
Same problem here. T-Mobile vanilla ROM. Can take up to 5 seconds for the call to reach my earpiece.
Solved it!
I had seen elsewhere that turning off the kepad sounds and turning off smart dialing could help, but I can't find a smart dialing option in the phone options.
Just tried switching the the Windows dialler rather than HTC and turning off auto Audio record on the Resco recorder which I had forgotten about.
After bit of playing, it appears (quite obviously now) to be the Audio recorder!
Used to use this on my wizard without any notable problems, but seems to be an issue on the Kaiser. It answers and hangs up in an instant now
A bit specific, but if any of you guys have this kind of thing installled and configured, try turning it off?!
Thanks for the replies and suggestions and hope you get it sorted too!
I don't have Resco audio installed and it only happens occasionally but when it does it usually happens a few times in a row.
Sometimes I also get the ringtone coming through the BT headset while the kaiser sputters into life. Then a 2 second delay
before the BT headset beeps and the caller can hear me.
Occasionally, I can hear the caller at the same time as I can hear the ringtone. Just another 'feature' I guess.
"If you're not quick, TM voicemail takes the call"
There's usually a few seconds delay between 'hearing' the other phone ring and it actually ringing. Can be up to 5 seconds.
some default ring tones are timed 3+ seconds apart. Choose the wrong ring tone and ring tone type (increasing volume) and
it's possible to miss the first 2 rings which, if the answer after x seconds delay is set to 20 seconds gives someone about
5 seconds to answer the phone or miss the call. My GF suffered 'missed call syndrome' after fiddling with her Hermes.
You can adjust the voice mail answer after x seconds time in start/settings/phone/services/call forwarding/get settings
Forward calls only if [no answer should be ticked]
Drop down menu Forward after ..
Mine is set to 30 seconds.
Is there a way to simply REJECT incoming call (caller hears 'busy' signal when i press red button)?
For now there's no difference between pressing end call hardware button, 'igore' software button, mute ring button and flipping the phone. Every action just mute ring, but DO NOT REJECT.
And I want to REJECT caller, when i want him to know that his call is not welcome in that moment.
Thx for help or tips how to make it work
press the hangup key?
The End Call hardware button definitely rejects. Does it not?
End call hardware button = hangup key = definitely NOT or maybe it's a matter of setting which i don't know where to look ;(
OK, just tried. I called myself from a different phone. The moment I press the hardware button I hear the busy signal...
ok, i tried too from 2 other phones - no busy signal - after pressing hardware button cannot do anything on Diamond, until other caller hangs off.
The moment of hangin off is thee moment when today screen backs.
strange... - settings maybe????
**********
OK, GOT IT!
Problem is in settings -> Phone -> Band
When set to auto - problem occurs
When manually set network type
red button really rejects.
Problem solved
But I still wonder why
I have exactly the same behaviour with my Diamond on Orange Switzerland Network. Changing the band settings to manual solved the problem! thanks for the tip!
But I'm wondering why too... :-/
Does not work here. (o2, Germany). If I get a call and press the reject button on screen the caller hears the message that the number is not availbale instead of a bussy signal.
Has someone a solution please cause this behavour is very confusing for the caller.
Thank you!
Solved the problem
I have set the wrong voice box number Now if someone calls me and I reject the call using the reject button the caller gets routed to my voicebox...
thanks........
I have one problem with my Diamond, I'm living in sweden and our oparator is tele2 which let the phone ringing just 4 times at the incomming call then going to answer machine, the problem is the HTC touch Diamond start to ring at the 3rd one, means just have two incomming ring , I have lots of missed call per a day, How can I solve this problem plz.
In the option menu, when your are one the page with number to call, there is a few of possibility:
vibrate in first, then ring (your case)
vibrate AND ring
...
Select vibrate and ring, your diamond will ring immediatelly at the first ring...
Excuse my english, i'm french...
[email protected] said:
In the option menu, when your are one the page with number to call, there is a few of possibility:
vibrate in first, then ring (your case)
vibrate AND ring
...
Select vibrate and ring, your diamond will ring immediatelly at the first ring...
Excuse my english, i'm french...
Click to expand...
Click to collapse
Not on my XDA Ignito; Even if vibrate and ring is set the lights flash for at least 2 incoming rings before the phone rings and vibrates
Ringing problem!
I have one problem with my Diamond, I'm living in sweden and our oparator is tele2 which let the phone ringing just 4 times at the incomming call then going to answer machine
Click to expand...
Click to collapse
If that is an operator setting maybe it's possible to change it in your operators' voice mailbox settings?
Thank you for your reply, I ve gott another mobile phone SE and it getting the incoming call with the first ringing, but with the diamond it is ringing after 2 incoming signal? I think there is a problem with the setting or some thing else but cann't get it back...any one can help its appreciated.
Its not from the operator and neither from signal setting.
Many have had same problem, i think there is a thread about this some where. I solved it by increasing the amount of time before my voicemail picked up (need to talk with your phone company about that) and using a .wav ringtone format. Sorry no "easy" fix
Thanks Hippo-DK , how can I find that thread? I'm in need to get this broblem solved, how can I do mailbox? or what?
He's right in the fact that you have to contact your cellular provider to increase the rings before going to voicemail, but you can't keep it from waiting 2 rings before actually ringing. It's a problem that no one has found a direct solution for.
Hey folks any idea on this?
I've had my Diamond for just over 12 months until now ring tone has worked fine when i get an incoming call but now it's stopped working. I usually have it set to "vibrate then ring" but now it just vibrates, i've tried all the options including just plain and simple "ring" but to no avail. Interestingly when i preview it when i've made a change it plays the ring tone for incoming call fine so the speaker must be ok. I've also changed the ringtone played as well but has the same net result.
any thoughts welcome
Press the volume button on the side of the phone.
There are two tabs [Ring] and [System]
Make sure [Ring] is not set at silent
I had the same problem and that was the cause. Just did it for no reason and still does it periodically. At least I know what to do to fix it now
Viffer800 said:
Press the volume button on the side of the phone.
There are two tabs [Ring] and [System]
Make sure [Ring] is not set at silent
I had the same problem and that was the cause. Just did it for no reason and still does it periodically. At least I know what to do to fix it now
Click to expand...
Click to collapse
Spot on mate!! Many thanks for that as you say no idea how mine came to be on silent for Ring either. Thanks again
Hey guys, I have another problem: when someone is calling me, my phone doesn't vibrate and it doesn't play the ring too..
I'm using Mini Provision rom. The first days everything worked fine, but since yesterday my phone doesn't ring on a call. I tried to change the ring (from a system file to a downloaded one) but it didn't work.
My volume settings are at the higer level, and the sms ring works... I don't know how to solve it and I'm being mad because of this...
I hope that someone can help me :crying:
EDIT: it was a profiles bug... It looks like the ring doesn't work with them. I tried to check and uncheck "call ring" but this make the ring doesn't work. (Sorry for my bad english, but I'm tired today)