Jetware, Tytn II and CK3100 contact synchronizing - Tilt, TyTN II, MDA Vario III General

Hi all,
I'm using Jetware 1.30 to push my TyTnII contacts to my parrot CK3100. I've set "phonebook options > set limits > limit how many numbers to sync > outlook : 0" in Jetware to avoid automatic synchronisation as I found elsewhere on the internet. This works fine for me, but automatic synchronisation would be preferred. Therefore:
1.Does anyone know if it syncrhonises ok (means also several numbers for one contact without the annoying "\m \h" extensions) removing the 'set limits' out of jetware?
2.Does 1.31 (newest version) work properly?
Thank you

Here's a screenshot of the limit option that i've set:

No Automatic sync that I know of
I have a 3400-LS Parrot when synchronising my contacts it puts the annoying /h /m etc. What I do is a manual push of the contact from the handset and use the jetware exactly the same as you are doing. This is not an automated system and I have not yet found a way to do this. If you find a way then I would be very interested but in the 2 years of having HTC handsets and a parrot I have not yet found an automated way of syncing the contacts correctly.

Great thank you for your reply. Are you using the newest version (1.31) and is it working properly?
And do I have to delete all contacts in my Parrot before doing a new contact push via jetware on my Tytn?

JetWARE 1.31, HTC TC & Alpine KCE-350BT
Am trying to get the above combination to work. Just wanted to know if anyone has any bluetooth fixes to get contacts to transfer in the correct format to the car kit.
It did work at one point and bring them all across, but after turning off BT then on again the carkit can't find the phone again. Tried all kinds of combinations but Jetware doesn't seem to work as intended.
Appreciate any other ideas. Haven't got any replies from any other threads about this.

Stopped working with wm6.1
Hi Guys,
just upgraded my Kaiser to WM6.1 and jetware is not working anymore, it stopped controlling the Specified categories to synchronize with my parrott 3100, the device just synchronize all, any solution or should i go search for an alternative? if there is any alternative.

Related

Automatically download images in Outlook Mobile?

I use Pocket Outlook for my email to a great extent. I am sick and tired of clicking on two links to see the images in each email.
Switching to another email software package would be considered, but which one of them can connect and synchronize with my desktop outlook?
all the third parties one use the default databases so it syncs the same way, the application just displays the data better and gives more options.
Not true
All the third party pocket outlook replacements do not use the same outlook databases at all.
Still looking for either how to turn this on by default or for suggestions on actrual third party replacements that do a good job and do use the same DB...
I agree Kruse,
I have not found any 3rd party email SW yet that is all inclusive with the Outlook contacts database.
On a somewhat similar topic, would you or anyone else on this thread know how I can delete or turn off the (Mobile Outlook) feature that currently duplicates all of my sent emails and returns them back to my inbox on My Kaiser/TytnII? I've searched the forum for about three days and found nothing so far on this topic.
If I try to delete them the next time I Send/Receive they just show up again, which is ultra frustrating. The same sent emails (that I deleted) keep reappearing until some pre-determined setting in either the mobile or PC version of MS Outlook (expires I guess) and/or decides it is time for those emails to not register in the inbox as new mail anymore.
Could this somehow be an Outlook setting on my PC?
Any help would be greatly appreciated.
Sincerely
Sent items in inbox - solution (gmail, mapi)
You are not using the "recent:" setting, look into the setup instructions in google, that will get rid of the sent stuff appearing in the inbox. Basically, in your settings on the handheld only, the email address you set up in your configuration should not be
<whatever>@gmail.com
but instead:
recent:<whatever>@gmail.com
- Kruse
superhero7 said:
Current Status/Issues/Challenges:
MSVC 2 work w/ wired headset. (desperate)
Confused about GPS ports and Hardware configs. (Can't get it to work anymore)
Click to expand...
Click to collapse
I note that your sig shows a version 1 hardSPL. Do you still use this SPL now with your 1.65 series radio? Have you seen the *Hopeless* GPS after 6.1 update thread yet? If you use a SPL designed for WM 6.0 with a WM 6.1 setup, you may encounter numerous problems. Checking the thread referred to above should help get your GPS up and running again

goodlink software contacts

Guys,
My org uses goodlink (good.com) as the email service provider not microsoft's push mail. I recently upgraded to a tilt and changed the rom promptly to schapps latest release.
The way the good software works is that it adds its own software stack (email/contacts/calendar etc) which syncs to the my outlook. The problem this creates is that my contacts do show up (the right softkey button leads to contacts which are the goodlink contact list) but are not connected to my dialer.
To be able to use smart dialling i then have to manually sync my phone to my computer to copy the contacts again which is a pain. My previous phone was based on windows 2003 whose dialler showed the goodlink contacts directly.
If there are any ideas or suggestions please let me know.
memon01 said:
Guys,
My org uses goodlink (good.com) as the email service provider not microsoft's push mail. I recently upgraded to a tilt and changed the rom promptly to schapps latest release.
The way the good software works is that it adds its own software stack (email/contacts/calendar etc) which syncs to the my outlook. The problem this creates is that my contacts do show up (the right softkey button leads to contacts which are the goodlink contact list) but are not connected to my dialer.
To be able to use smart dialling i then have to manually sync my phone to my computer to copy the contacts again which is a pain. My previous phone was based on windows 2003 whose dialler showed the goodlink contacts directly.
If there are any ideas or suggestions please let me know.
Click to expand...
Click to collapse
This is not what is supposed to happen. I use GL too. If you sync with Active synch eventually, you will end up with duplicate contacts. Sometimes it takes a bit of time for this to occur. This applies to GL 5. In 4.9, I had to do exactly as you are stating...synch only the contacts with active synch.
interestingly, I have a post regarding Good Mail. I found that using the XDA Live 3.0 (WM6.1) with the reTOUCHED dialpad, my contacts, while in the phone mode, linked to my Lotus notes contacts, not my local ones.
If I'm understanding you correctly, this is exactly what you want to happen (exactly the opposite of what I want to happen on mine).
I have 5.0.3.23 good mail with the above and it works the way you want yours...
Good luck,
MBN
MustBNuts said:
interestingly, I have a post regarding Good Mail. I found that using the XDA Live 3.0 (WM6.1) with the reTOUCHED dialpad, my contacts, while in the phone mode, linked to my Lotus notes contacts, not my local ones.
If I'm understanding you correctly, this is exactly what you want to happen (exactly the opposite of what I want to happen on mine).
I have 5.0.3.23 good mail with the above and it works the way you want yours...
Good luck,
MBN
Click to expand...
Click to collapse
With 5.0 the contacts are shared. If you sync with active sync, they will be duplicated because you are already syncing the mail server. GL 5 takes over much more of the system than past versions. I have found no way to change its behavior at all. If I make changes, it has protections in it that undoes the changes.
thanks for the help guys. I got on IT's case and changed my GL version to 5.0 and a hard reset and the installation of the retouched dialler everything is now working exactly the way i want it. Thanks guys!
parleyp said:
With 5.0 the contacts are shared. If you sync with active sync, they will be duplicated because you are already syncing the mail server. GL 5 takes over much more of the system than past versions. I have found no way to change its behavior at all. If I make changes, it has protections in it that undoes the changes.
Click to expand...
Click to collapse
Have you tried using Microsoft Voice command with Goodlink contacts? in my search for a solution i found a thread on another forum which said that voice commands/dialling wont work with goodlink contacts and we will have to sync them again. Im going to be trying it anyway but just wondering if somebody has already done the effort.
I can also vouch for that. I am the good admin at my org and the latest 5.0.4.46 works quite nice with outlook contacts and allows for smart dialing.
memon01 said:
Have you tried using Microsoft Voice command with Goodlink contacts? in my search for a solution i found a thread on another forum which said that voice commands/dialling wont work with goodlink contacts and we will have to sync them again. Im going to be trying it anyway but just wondering if somebody has already done the effort.
Click to expand...
Click to collapse
I use voice speed dial and it works with GL 5 owning the contacts without doing a sync via active sync. Haven't used MS VCMD so ymmv.
jfor26 said:
I can also vouch for that. I am the good admin at my org and the latest 5.0.4.46 works quite nice with outlook contacts and allows for smart dialing.
Click to expand...
Click to collapse
I just wish I could talk my IT guys into a longer wait period before locking the phone...30 minutes kind of sucks when using the GPS...in a car. Any ideas for hacks? I haven't found any.

Sim access protocol and "internal" contacts

The pda supports SAP. But synchronisation is only possible with the SIM contacts. Is there a way to also synchronise the contacts in the internal memory? (The nokia added this funcionality to there phones and it works wel)
Background: contact on SIM card only support limited characters and it is only possible to use 1 number per contact. In outlook there are more possibilities. The carkit i use does support this and this.
Thanks
try the wiki page?
I had to go and one time manually enter all my contacts into outlook.
Then somehow i had double contacts at one point. lolol.. Its not the greatest software the thing comes with. Id swear i read something about a contact bug.
search around, i found one i been using called icontacts i belive, here on the forum it opens nicely for new contacts.
while typing this my cat got a contact.
i search night after night but still no results. icontact is not the application that i'm looking for. I think is has to do with the bluetooth stack. What i find out know is that there maybe a rom provided by Schaps with have an option OBEX within the SAP setting
http://forum.xda-developers.com/showthread.php?t=338663&page=2
I hope that some can tell me more about it.

Sync Diamond with Mac OS X 10.5

I know there are a few options out there for WM and Mac syncing, but need to know which ones work reliably with the Diamond for Calendars, Contacts. Pics, music and video would be good too.
Is The Missing Sync the best to get in this respect and has anyone tested with the Diamond ?
cheers in advance.
MissingSync works for me very well...
Cool thanks. Needed to know before buying it. New to the whole WM thing and getting my Diamond Weds with luck.
If anyone has a Diamond and a MacBook Pro, can you let me know if the Internet Sharing with PAN Bluetooth works and is reliable?
My current Hermes has a bad latency issue which seems to affect a lot of WM devices when tethered with the MacBook Pro / Airs.
Thanks
Aidan
Will give it a go later in the week if I get my Diamond ok on Weds. Mind you, will be fun being a new WM user trying to get it to work ;-)
Its a feature I'd like to be able to use.
It works well, still a bit slow tho, tried it the other day for fun.
You can go online alrite, dunno if it's where i was sitting but hte connection was slow
Any chance of a little tutorial chap ?
Could never get my Nokia N95 to work correctly.
Try it !!
Syncmate.
I use Sync Mate and its pretty good.
Will give it a go too.
Thanks.
Been having real issues with both SyncMate and Missing Sync.
Both do not sync correctly... I usually sync just one group out of Address Book (not the whole thing) and keep that up to date. 1st time I sync it works, subsequent times it insists on syncing all my contacts.
Calendar is also a bit flakey.
Running Mac OS X 10.5.4
Mark Space do not seem to warrant any pre sales support either so are of no help at all. Been waiting 3 days for a reply to my questions
Missing Sync does not work well.
Pictures of contacts are partly corrupt.
TF3D starts new, if i add a new favorite with some contacts.
Then i must delete the picture from this contact and add a new one, then TF3d will work.
(OSX10.5, Missing Sync 4.03, MacBook)
Hi, everytime i sync with missing sync i double my contacts anyone knows why?
its not good because i have some contacts in triplicate.
Regards
fredsalvas said:
Hi, everytime i sync with missing sync i double my contacts anyone knows why?
its not good because i have some contacts in triplicate.
Regards
Click to expand...
Click to collapse
First time, i sync the PDA with Missing Sync, in the options i switch on the button "MAC overwrites PDA". Then sync, then switch off the button and sync again. So it works at mine.
schroepfer said:
First time, i sync the PDA with Missing Sync, in the options i switch on the button "MAC overwrites PDA". Then sync, then switch off the button and sync again. So it works at mine.
Click to expand...
Click to collapse
Thks a lot i will try it, i will post the resolt later. Thks
regards
I am using Missing Sync WM 4.0.3 with Mac OS 10.5.4 and it is working fine but I have no picture attached to the contacts.
The first-time sync procedure I usually use is the following:
- launch iSync from the "Application" folder;
- reset the sync history in the iSync > Preferences menu;
- close iSync;
- launch Missing Sync WM;
- for each syncing plugin you need to use, select "Mac overrides Device", click "Debugging options" and then "Reset sync history";
- logout from your user session and login back again;
- connect your device as explained in the Missing Sync manual;
- enable detailed logging in Missing Sync preferences and display the log;
... then be very very careful ;-)
* click the "Sync" button at the top or at the bottom of the main Missing Sync window.
* some of the items selected for syncing will sync and some will not (look at the log during the syncing process). *Disable* the "Mac overrides Device" options for the successfully synced items. Repeat the two stared "*" steps until all the item are successfully synced...
- further synchronizations should run flawlessly.
Hope this helps... (be patient and good luck ;-)
[You may also want to sync a second Mac with your device but the procedure is a bit different and a bit more complex.]
mbp and missing sync works very well
correction !!!
i just tried, than i even bought syncmate, its far better, and nicer than pocketmac or missing sync ( wich i used for years, so i absolutely recommend syncmate now, wonderful !!
syncmate is great. It does what it is suppose to do (I've only tried contacts).
I've used only USB sync don't know if WIFI works.
Syncmate is also working for e, strangely enough only via the Wifi - Sync option, not via the USB cable (but i prefer the wireless link anyways).
You should be aware, that you have to install the syncmate - driver on your phone, or no connection will be possible

Synchonize contact with multiple numbers to Parrot carkit

Hi,
I can't find it using the search function, but is there a way to sync the contacts to my carkit, keeping one name with several different numbers (home, mobile, work)?
Now I get multiple entries:
John/work
John/home
John/mobile
Parrot 6100
I have a parrot 6100 in both of my cars and the contacts sync fine. One name: 3 numbers. Do you have your device allowing sim access to the parrot?
Sorry for the late respons.
Where can you change the setting if you want to allow sim access from the parrot? I can't find this feature.
yes you can do this you need windows mobile 6.1 and parrot firmware 4.17a or above.
then first time you connect the phone it will ask if it can have access to your address book just say yes and from then on all will be fine.
only problem i have is it tries to sync the call log every time
Thanks
Paul
Hi,
I have version 4.17A installed on the parrot, but I don't get the question if I want to sync address book. Is there a way to force this?
no what version of windows mobile are you using.
Paul
Sorry, I'm using WM 6.1
pukka said:
yes you can do this you need windows mobile 6.1 and parrot firmware 4.17a or above.
then first time you connect the phone it will ask if it can have access to your address book just say yes and from then on all will be fine.
Click to expand...
Click to collapse
Hmmmm, which WM6.1 ROM are you running? I'm on the AT&T official 6.1 on the Tilt and my Parrot CK3100 has 4.18a and I don't get the PBAP phone book sync - I get the Name/H and Name/W entries still.
Richard

Categories

Resources