Ringtone Problem - Tilt, TyTN II, MDA Vario III General

I've been using my TyTN II for about a month now and have several ring tones that were installed day one and were functioning just fine until today. Suddenly, ring tones with .amr and .awb extensions will no longer work. I think the problem may have been caused by the installation of the trial of Photo Contacts Pro5. I installed it last night, played around with it a bit and decided I didn't like it so uninstalled it. Since then, my ring tones are not functioning properly. They are installed in the root of my storage card. The error message I receive is different depending on how I try to access the ring tone.
1. when changing via Settings/Phone, error is: this ring tone file is corrupted or unavailable. Please choose a different ring tone.
After clicking the the OK on the error msg box, I click OK on the window screen and receive: filename.awb Sorry, this is a protected file and it cannot be forwarded.
2. If I go to the storage card and click on the file, WMP opens and gives me the msg: Cannot play the file.
I have tried copying a fresh copy of the files to the storage card but receive the same messages.
Any suggestions?
Jo Anne

dunno... i'm having the same problem; i remember at some point runing a restore, but can't for the life of me figure what file's bad... I'm almost at the point of a full reset or a ROM upgrade...
Jeremie

After having absolutely no replies to this problem on several forums, I did do a hard reset. Guess what? It didn't fix the problem! So, I no longer use ring tones with those file types. I also had this problem on my 8125 but was able to find a fix back then. Can't remember what I did though.

weird... A hard reset did work for me....
Jeremie

Related

Custom Text/Voice Message Sounds on 8125?

I tried putting custom text message and voice message sounds into my Windows directory, into the rings and directory and I even tried to put them into the My Documents folder on my storage card and no matter what, I can't seem to get them to show up in the notifications sound pull down menu. The only thing that I've seemed to notice is that they are larger than 100kb, but I don't know if that has any bearing on the situation.
I also tried scouring the registry and the most useful thing I found, although I can't seem to make sense of any of it, is at HKEY_CURRENT_USER\ControlPanel\Notifications. If anyone has any ideas, they would be greatly appriciated.
they have to be wav files. Not mp3.
That's what I used and had no luck getting them to show up in the list of notification sounds.
That's what I used and had no luck getting them to show up in the list of notification sounds.

SMS Not Working

Has anyone managed to stop SMS from working? Something I've tweaked or installed is preventing me from sending messages - when I tap the SMS option nothing at all happens. I don't seem to be able to receive them either. With all the fiddling (Kaiser Tweak, GPRS Monitor, SBP etc) who knows what I've done. Just hoping someone else may have stumbled over the same problem before I have to reset everything back to original (It's the only fault).
Thanks
Are you able to compose an SMS at all?
Have you verified that your Text Message Service Center number is not blank?
Please provide more information. Phone, ROM, Carrier, etc...
Thanks for the interest,
I'm using WM6 standard ROM 1.82.707.0.WWE (ie not cooked) on the Tytn2, the service centre number is there and is correct according to the carrier (Telstra Australia).
It used to work fine so I'm assuming that I've tweaked something I should have left alone, or one of these installs has jammed it up - just no idea what!
If I pull up a contact and tap the 'Send Text Message' option nothing at all happens, just sits there looking at me! I don't seem to be able to receive texts either.
Installed are the standard apps plus Google Maps, GPRS Monitor, Kaiser Tweak, Resco File Explorer, TomTom, SPB mobile Shell and Diary, QuickMenu.
I know it's a tricky one to fix from a distance (so many settings, so little patience) but any thoughts would be appreciated.
I had the same problem a few months ago and tried everything. Defaulted my tweaks and adv config etc. Eventually I had to reinstall my rom which is a cooked rom and all came back and have not had any problems since then. Hpefully you do not have to do this. You should try a cooked rom.
Ok I want to take a shot at this.....
Ok Does Telstra have the ability to send SMS to mobiles from their website? If so try sending one to yourself.
Next. Go into Messaging, Menu -> New -> SMS. Type in your mobile and Send.
Oh and Uninstall The SPB product Soft Reset and try again.
Let me know If that works.
Can't find a way to send sms from telstra (easily) so tried from another mobile. The other mobile says it can't send the message. I'm (almost) sure this is my phone rejecting it rather than a network of other phone's fault.
When I tap on Messaging in the menu nothing happens - doesn't take me anywhere at all. Same thing if I tap on 'send text message' option in contacts.
Removed the spb stuff, did a soft reset, still no go.
Keep the thoughts coming though. In the end it would probably be easier and quicker just to hard reset now, but it's the challenge of figuring it out that's interesting isn't it? It's going to be one of those dead simple slap your forehead things I reckon.
Thanks for all the help so far.
Have you tried reinstalling the Arcsoft SMS/MMS client? There are many different versions floating around XDA.
OK it's fixed. Here's what I did:
Discovered that the 'Messaging' menu item in the start menu pointed to a file called tmail.exe
Used file explorer to navigate to tmail and ran it directly
Fell over laughing when it actually ran
From that time on it works via any link, such as the start menu and contacts option to SMS
I have no idea what that's all about but I'm really happy to have it back - although I haven't tested sending and receiving texts yet
Interestingly a very similar thing happened to Mortscript - I have a script that rotates the screen and runs TomTom (not mine, found on xda-dev) and it wouldn't work either after all this fiddling until I ran it directly rather than through any links. Now it works fine too.
If anyone knows /why/ it happened I'd be interested.
Thanks for all the support. Really great knowing there's such a community around.
Alrighty then, spoke too soon. Now it works when the sd card is out, but not when it's in. Same old problem, tap on messaging and nothing. With the card out of the slot, messaging appears. What the heck is this?! Could it be something to do with where messages are stored? I'm also getting this storagecard2 problem each time I take the card in and out which is easy enough to fix but could be contributing I suppose. Any more ideas?
Edit: I repaired the storagecard2 directory issue, cleaned up all the references to storagecard2 in the registry (about 4), unticked the option to use the card to store attachments, and it seems to work. I've also re-synched and re-installed spb mobileshell. Last time it seemed to fail at that last step but this time is still working. Even after a final soft reset. I haven't reinstalled spb diary.
Has me stumped but works again now. Sorry to bore you all with this but someone may have a simple answer and the ordeal might help someone else I hope.
Based on all of these issues, I would definitely suggest re-flashing your current ROM again (not just a hard reset), and do a full format of your SD card outside of the phone. It sounds like you've got some major corruption going on...
drmc said:
Alrighty then, spoke too soon. Now it works when the sd card is out, but not when it's in. Same old problem, tap on messaging and nothing. With the card out of the slot, messaging appears. What the heck is this?! Could it be something to do with where messages are stored? I'm also getting this storagecard2 problem each time I take the card in and out which is easy enough to fix but could be contributing I suppose. Any more ideas?
Edit: I repaired the storagecard2 directory issue, cleaned up all the references to storagecard2 in the registry (about 4), unticked the option to use the card to store attachments, and it seems to work. I've also re-synched and re-installed spb mobileshell. Last time it seemed to fail at that last step but this time is still working. Even after a final soft reset. I haven't reinstalled spb diary.
Has me stumped but works again now. Sorry to bore you all with this but someone may have a simple answer and the ordeal might help someone else I hope.
Click to expand...
Click to collapse
Yes delete the storage card directory, if it gets corrupt the unit won't send or receive SMS.
Speaking from experience here
Thanks guys,
I've re-done the storage card and all is still working ok. I'm reluctant to reflash while it's working so I'll wait to see how long it keeps up.
Thanks again.

Cannot Use Ringtones On WM6.1

I finally got WM6.1 installed and ran into a little issue. I tried to customize the device with my old ringtones from WM6.0.
The issue is that they do not show up in the Incoming Calls area of the ringtone section. I moved them into various FOLDERS hoping that WM6.1 would see them but this didn't work. I did notice that the ringtones were showing up in the area for RECEIVED TEXT MESSAGES and other types of the sound notifications.
How can I get the ringtones that were working perfectly fine on WM6.0 to work on the latest WM6.1?
Thanks!
Did you try putting them in the "Rings" folder. That worked for me.
I have tried the following FOLDERS without any luck:
/dev/My Documents/
/dev/My Documents/Ringtones
/dev/storage card/My Documents/
/dev/storage card/My Documents/Ringtones
/dev/Windows/Rings/
Seven ringtones (mp3) that worked perfectly on W6.0 are no longer visible as choices for the "Phone: Incoming Call" area. The only options are two WAV files I use for messages being received. However, those mp3 ringtones are visible and are options under all of the send/receive notification tone menus.
I don't get why I can't choose them as phone-call ringtones...
Any thoughts?
mine is doing the same. However, my song still rings even though it does not show being the ringer selected.
/dev/Windows/Rings/
That's where I have mine.
I had the same problem and the only solution that I found was from which ever folder you music is in just press and hold down on the song, and set as ring tone. Now your phone will ring with that song, but if you go in settings/sounds/notifications it still wont come up.
crypted said:
I finally got WM6.1 installed and ran into a little issue. I tried to customize the device with my old ringtones from WM6.0.
The issue is that they do not show up in the Incoming Calls area of the ringtone section. I moved them into various FOLDERS hoping that WM6.1 would see them but this didn't work. I did notice that the ringtones were showing up in the area for RECEIVED TEXT MESSAGES and other types of the sound notifications.
How can I get the ringtones that were working perfectly fine on WM6.0 to work on the latest WM6.1?
Thanks!
Click to expand...
Click to collapse
I assume you are on an AT&T Tilt? If so, I had the same problem as well. It turns out that it has something to do with the file size. There's some limit ~400k for the file for it to show on your notification lists for ringtone.
I had to chop off the end of my song, and get it to 300k and then it showed/worked just fine. I'm sure this will get fixed soon.
There's a cab that enables this function. You install it and voila all your mp3's can be set as ringtones. As soon as i find the link again Ill post it. I used it and it works great.
The Fix:
Install the .cab then move the desired MP3 File to Device\My Documents\My Ringtones and you should be able to see them in your Sounds & Notifications settings program.
Source: MikeFordMustang.com, Tiltmobility.com
Okay so I may not post it since someone beat me to it. LOL
http://mikefordmustang.com/downloads/NoRingtoneLimit.cab
I've got all mine on the root of the storage card and it works just fine - can have any size ring-tone you want...
Yo what a difference a .cab can make. I was racking my brain trying to figure out the solution to this issue. I was trying to convert .mp3 to .wma, I was downgrading the audio quality of my songs trying to get their filesize down, all with no positive results. Then I find this thread install the .cab and presto it works. To the creator and posters of this fix THANK YOU!!!!!!! You saved me from a downgrade back to 6.0. :-D
Hi,
I transferred the cab file to my xda ii, has a wm6.1 rom and it just seemed to open an html internet page with the commands in.
I see my ringtones now BUT i can't find ringtones for text.
Basically I want set my own ringtone for incoming calls and then set a differnt one for my incoming sms texts... but it just shows default when I go to look in incoming sms...
If that makes sense can someone help?
I should also mention when i extract the file it is .xml - i tried chaning the file ext to .exe or .cab but no luck... im probably being stupid but all help is appreciated,
thank you
wow, thank you
WM 6.1 registry edit for ringtone file size
I upgraded from WM 6.0 to 6.1 and now my custom ring tones that are over 500Kb do not show up in the pull down menu in order to select them for contacts. This fix is to edit the registry.
- Go into HKEY_Current User > ControlPanel > Sounds
- Delete the key of FileSizeLimit
- Done, You should now be able to set any MP3 as your ringtone.
Alan
Thanks for that .cab it was driving me insane as well not being able to have any of my old ringtones that I used for 6.0 work in 6.1 Thanks a ton!!
Thank you!!! This is just what I was looking for.
Happy Holidays!
I did not want to start a new thread for this secondary issue. I loved when my Nokia bar phone made that BEEP sound with vibration. I could hear it from a distance as it was so distinct even at low volume.
This new Windows based phones suck when it comes to rings and how they sound.
Does anyone have a very distinct beep / similar ring tone that is heard well from Tilt's loudspeakers? That would be appreciated.
New registry keys display list of ringtones.
This is my first post to these fantastic forums. I think I finally found something that merits a post.
Note: I am using WM6.1 AT&T build for Blackjack II. This may not apply here if you use a custom ROM, in which case the chefs may have already remove these keys. If not, here's how you get to see your ringtones, etc. from the Settings/Sounds menus.
In WM6.1 the registry key,
HKEY_CURRENT_USER\ControlPanel\Sounds
have 2 new keys:
AllSounds
Ringtones
Each of these keys is a collection of sound files, obviously the ones shipped with the original rom. Use a registry editor to delete both keys. The time to display the list of sounds will increase if you have many sound files.
If you have a set of custom tones, you could put this list into the registry instead and the list will display much faster.
I hope this saves someone some time and frustration.
skaterx2
Can you tell me how to install the NoRingtoneLimit.cab to my phone. This is new to me thk u.

help me please

I have the htc fuze and I'm trying 2 set a specific song as my text message notification I tried putting it n the rings folder bt its nt coming up could some 1 help me
Questions:
Are you trying to use the whole song or part of it? (using mp3 trimmer)
Have you placed the file under window/rings??
antonio/valleyboy said:
I have the htc fuze and I'm trying 2 set a specific song as my text message notification I tried putting it n the rings folder bt its nt coming up could some 1 help me
Click to expand...
Click to collapse
Try putting it in the Windows folder.
Cheers,
Steve.
same thing i've been trying to figure out when i got the phone. I tried putting it in the windows rings folder but that didnt work as well. i made a tone thats even shorter then the stock ones but it still doesnt show up when i go to the sounds and notifications settings... HELP!
Make sure it's on wma format and put this on windows folder. Working well for me.
Pilaf said:
Make sure it's on wma format and put this on windows folder. Working well for me.
Click to expand...
Click to collapse
Just to clarify. The file needs to go in /windows/ NOT /windows/rings.
Yes, you have to put it on the windows folder in wma format and after you can see it wen you go to NOTIFICATION. I do that with new message and new email. Work's fine. For ringtones work's too.
antonio/valleyboy said:
I have the htc fuze and I'm trying 2 set a specific song as my text message notification I tried putting it n the rings folder bt its nt coming up could some 1 help me
Click to expand...
Click to collapse
This has been asked and answered a million times, please search and you would have found it.
The easiest place to put all sounds so they can be used as either ringer, email notifications, sms/mms is to go to file explorer, my device, application data, then sounds. Place them in there. If you want to use a particular sound for an alarm then place those sounds in your windows folder.

MP3 as text alert?

Hi all, i have recently got an mp3 trimming program i found here http://forum.xda-developers.com/showthread.php?p=4841262#post4841262 which works fine on the TD2, and i have chopped up a few mp3 tracks and put them in the ringtone folder(main memory) on my device. Now i can select one of these to use as my ringtone fine using the notifications tab in sounds but i cant seem to set a mp3 i have trimmed as an incoming text message alert. Does anyone know if this is possible and if so how?
no it is not possible, you have to put your file in wma format into windows folder
edit: sorry my mistake, mp3 works in wm6.5
I set one of my trimmed mp3s as my incoming text and mms alert. I renamed as "Alert-tonename" and dropped in into my windows folder. I also put into my ringtones folder for good measure so I don't know if you need to do both. But, that is how I got one of my trimmed mp3s available as a message alert. Hope this helps.
Shambolicuk said:
Hi all, i have recently got an mp3 trimming program i found here http://forum.xda-developers.com/showthread.php?p=4841262#post4841262 which works fine on the TD2, and i have chopped up a few mp3 tracks and put them in the ringtone folder(main memory) on my device. Now i can select one of these to use as my ringtone fine using the notifications tab in sounds but i cant seem to set a mp3 i have trimmed as an incoming text message alert. Does anyone know if this is possible and if so how?
Click to expand...
Click to collapse
Put it directly into your Windows folder, rings are only for rings but sounds go to Windows.
Thanks for the info guys ill take a look now
Hmm if i try and move the file on my pc via sync for some reason it does not show the windows folder i need to move it to, and i have tried several things on the device itself i.e. touching the mp3 file till i get the pop up menu, pressing cut then going to the windows folder holding the screen again but i have no option to paste :S sorry if its a simple solution i just cant seem to work it out.
Many thanks guyd i have sussed it ou, im well happy thanks
P.S. if anyone else is unsure feel free to ask here or message me and ill do my best to explain.
Hi Shambolicuk, I'd be grateful if you could explain to me how you did it.
I copied them in My Ringtones and they automatically appeared in the ringtone list
Changing ringtone and alerts to Mp3's or Wav's
This is old but I wonder if there are any fossil TD2's that are still using TD2's. Change the login sound by setting "HTC-tonename" ? Cant delete the original HTC-Quietly...wav any ideas??
Quote I copied them in My Ringtones and they automatically appeared in the ringtone list Quote
This works for ringtones but not for alarms or alerts.

Categories

Resources