I have HTCSVC greyed out under Startup Services when viewed with MemMaid, when I clicked on it, it refers to htcsvc.dll and said target is missing.
Any idea what this service does and where can I obtain the DLL? Thanks.
Did youever get any answer to this? i am having the same issue with the latest Kaiser Rom from HTC. I am also getting a Filesys error during startup. i am wondering if these are related? What did you do? Did you also have a startup error.
Related
Forgive me if this question has come up in the past. I have searched the Wiki without success, especially when it comes to my specific problem.
For reasons that are unknown to me, my TyTN II will no longer play voice recordings on Windows Media Player. When I open the Voice Recorder program and make a test recording, it will not play when I hit the play button. If I then find the file in file explorer (My Voices), and then click on it, Windows Media Player opens, but I get the following error message:
"No combination of intermediate filters could be found to make the connection."
Everything was working fine just a week ago, but now I can't play any recorded files.
Does anyone know how I can resolve this issue? Please help.
Thank you,
Peter
"No combination" issue solved ...
Hey, folks. After a lengthy investigation, several hard resets, and re-installing everything quite a few times, I have discovered the reason for the error message, "No combination of intermediate filters could be found to make the connection."
As my original message indicated, for reasons entirely unknown at the time, I was unable to play sound files. Following my investigation; however, I discovered that the problem was not limited to sound files, but also included video files. They would produce the same error message.
The problem? Pocket Mechanic Professional v2.92 and, specifically, the Registry Cleanup feature. If you fill in either one of the two selection boxes, "Empty Open/OpenDoc keys," or "Empty registry keys," and then run the program, you will delete important registry entries that will immediately stop sound and video files from working in at least the following two programs:
Voice Recorder
Windows Media Player
Hopefully this information can help others from experiencing the utter frustration that lead me to this unfortunate conclusion.
Peter
i have the same software too
is there anybody that can give me those? and were do i put them
thanks
PeterHTC said:
Hey, folks. After a lengthy investigation, several hard resets, and re-installing everything quite a few times, I have discovered the reason for the error message, "No combination of intermediate filters could be found to make the connection."
As my original message indicated, for reasons entirely unknown at the time, I was unable to play sound files. Following my investigation; however, I discovered that the problem was not limited to sound files, but also included video files. They would produce the same error message.
The problem? Pocket Mechanic Professional v2.92 and, specifically, the Registry Cleanup feature. If you fill in either one of the two selection boxes, "Empty Open/OpenDoc keys," or "Empty registry keys," and then run the program, you will delete important registry entries that will immediately stop sound and video files from working in at least the following two programs:
Voice Recorder
Windows Media Player
Hopefully this information can help others from experiencing the utter frustration that lead me to this unfortunate conclusion.
Peter
Click to expand...
Click to collapse
[email protected]!
That thing also happened to me!
Any way (other than hard reset) to fix it?
Hi all,
My P4350 is showing the Notification Error for every now and then. It says "Cannot execute\Application Data\Volatile\pockeplayer wakeup.exe"
The Conduit Pocket Player had no problem. Once my friend took the phone to listen to the music. After the phone came back to me this error is appearing.
I uninstalled the application. But, still the notification persists.!!!
Help me.
Hi all,
I uninstalled the application and reinstalled. But, the error still pops-up every now and then.
There is nothing in that path, which the error notification shows.
Is this a virus? Do I have to change any registry?
Please help me.
Any solution?
Hi,
I may sound that I am in hurry to get a solution ofr the problem.
In mean time, I renamed the S2U2 as pocketplayerwakeup.exe and saved that into \Application Data\Volatile\
May sound crazy!!!!!!
So that, if the phone wants to do something, let it lock the keys. So, now I am not getting the Error message.
But, still is there any solution for this?
error again
The error appeared again on today. i was surprised to see that, the duplicate copy what I created was not there. Don't know how that file was deleted. I again created the file.
Is there a solution to this? (Apart from flashing the ROM).
Whenever I connect the phone to computer, it is deleting the duplicate file what I created.
So, whenever I unplug it from computer, I again start getting the same error notification.
It looks like some background services tried to execute that path. Here is my appoarch, but be caution, if you are not familiar with the registry, please make a backup before editing anything.
First check if no "weird" stuffs is in the "\windows\startup" folder, then check if that path or file is refered to in the \HKEY_LOCAL_MACHINE\Init and \HKEY_LOCAL_MACHINE\Services of the Registry and delete them. If still nothting there, make a complete search of the registry to see any reference to that file and delete it (it's ok since you already uninstall the program). Hope this help.
I am even more dumb when it comes to registry. (I can modify something if the name of the particular key is given.)
I could find the follwing thing in Windows/Startup
Capnotify.lnk
poutlook.lnk
WifInit.lnk
sddaemon.lnk
iLock2.lnk
WkTASK.lnk
GPRSNotify.LNK
Among these I don't know what does Capnotify.lnk and sddaemon.lnk do. I don't even know how to find the registry key which it referes to.
raghu13uk said:
Among these I don't know what does Capnotify.lnk and sddaemon.lnk do. I don't even know how to find the registry key which it referes to.
Click to expand...
Click to collapse
Try PHM Registry editor. Do a search with "pocketplayer" or "wakeup.exe".
No success
I finally installed PHM registry editor. But, did not find anything for wakeup.exe
What to do?
I'm hoping someone here can help. I've searched to the point where my eyes were glazing over, and didn't manage to find a solution to the problem I'm having, so here goes (it's more an annoyance than an earth-shattering problem, but one I'd love to sort).
I had a game installed (Bitforge Runes) on my TyTn II, which I've tried to uninstall. Despite the uninstall process apparently going through Ok, the app is still listed in the 'Remove Programs' list.
The program directory on the storage card has gone, as has any trace of related files on the device itself. Also, searching the registry for either 'Bitforge' or 'Runes' finds nothing.
Despite this, the game is still listed in 'Remove Programs'. Trying to remove it gives the usual message stating that the program could not be removed, and offering to simply remove it from the list. Selecting 'Yes' at this prompt also appears to go through Ok, but on looking through the list, the app is still listed.
Any idea where I can go to remove this from the 'Remove Programs' list?
Thanks guys.
*** Nudge ***
I've got the same problem with some programs. They are (partially) removed from my device, but still appear in my program list. They don't show op in SKTools and i can't find any trace of the programs on my device or registry. It's not a problem. More annoying. I like a clean rom.
Some of those programs aren't entirely removed from my device. I can see that in my free storage memory.
Any ideas?
Can't remove program
I also have this issue. I have tried everything to remove TCPMP. I even went into the registry and searched and deleted all references to TCPMP. My final search came back empty.
Remove programs list still includes TCPMP.
The reason for wanting to remove TCPMP....It does not work!!! I keep getting a crash.txt message.
*** Bump ***
Anybody have any thoughts on this one, or am I flogging the proverbial expired equine?
Hi guys,
I have had to get a new Tytn II here in Australia due to water damage on previous model .... a real fun time
Previous model had WM60, this one has WM6.1.
W 61 is creating a problem cos I run a program called Winterface. I love it - does what I want. However the previous manner in which Winterface operated (notifications, program handling ...) is not happening.
I contacted Winterface and they asked me to download newest version to see if that would fix things. I have but I cannot install it.
I get the following message:
"The file PowerDemon' cannot be opened. Either it is not signed with a trusted certificate, or one its components cannot be found. If the problem persists, try reinstalling or restoring this file. "
So is there a way of disabling certificate checking from within 6.1??
looked on the phone and via google but nuthin has come up...
Cheers
Get Kaiser Tweak for this forum and there is a setting where you can disable certificate checking. It sounds like it's more of an app problem than anything else.
Thanks for that - i have installed Kaiser Tweak and the problem persists. Definitely an app issue. The VITO support is helping me at the moment so hopefully a resolution is in sight.
cheers
shaunl said:
"The file PowerDemon' cannot be opened. Either it is not signed with a trusted certificate, or one its components cannot be found. If the problem persists, try reinstalling or restoring this file. "
Click to expand...
Click to collapse
Well, you have your answer right there.
Only 2 choices: either ask Vito to correctly signed their apps and files (most likely), or they really gave you crappy app with something missing.
BTW: Vito is well-known crapapp maker.
It started as very innovative company - now its just moneymaking crapola.
shaunl said:
"The file PowerDemon' cannot be opened. Either it is not signed with a trusted certificate, or one its components cannot be found. If the problem persists, try reinstalling or restoring this file. "
Click to expand...
Click to collapse
Well, you have your answer right there.
Only 2 choices: either ask Vito to correctly sign their apps and files, or they really gave you crappy app with something missing.
BTW: Vito is well-known crapapp maker.
It started as very innovative company - now its just moneymaking crapola.
@MACkjam
No user of commercial software (which he *paid for*) should have ever resolve to "unlocking" his phone or such in order to use the commercial software on it, man... its a blasphemy
Just to be certain, check the security level with this tool on your Kaiser:
http://www.microsoft.com/downloads/...8C-D587-47E0-908B-09FEE6EA517A&displaylang=en
It may still be an unsigned module problem... Be careful when you change security levels, it may be impossible to reset them without a hard reset.
Hi guys,
VITO responded to my email outlining that disabling the security check did nothing.
A new version of Winterface was released (1.15) and voila it installed and runs as it used to under W6.0. VITO help was great and it looks like problem solved.
-888- - I was interested in your comment on VITO being a crapapp maker. I have found Winterface, SMS chat and zoomboard really good apps - in fact the best I have seen for Win Mobile. Just my opinion of course.
many thanks to everyone for their input and help - really appreciated!
BTW - I will be using Kaiser to reset the certificate checking.
Cheers
Shaun
I've been tweaking away for a few weeks now and everything continued to work fine. HOWEVER, I think in my install of opera mini along with Esmertec Jbed (to try to get larger fonts) caused this problem though...
Now when I go into Wikimobil, I get a message "could not find suite s3_"
How can I correct this?
Thanks,
George
Have the same problem.
I've got the same problem - I've lost the application and get the same error message.