I tried to soft reset my tytn II in the dark, and accidently put the stylus into the usb/charging slot and somehow screwed up my phone. It will not charge, or connect with my computer. Any suggestions?
OMG! I did the same thing, but luckily i didn't do further damage except the copper parts become bent
HTC should have done something about this! i am sure many other users did the same
can u take it back to your supplier for warranty claim?
same problem here...
i could bend back the copper contacts with a WOODEN (!!) toothpick (dont steer around with metal in there....)
Looks like i tried to reset the device in darkness last night and fumbled around in the usb jack.
Damn... really bad position for the reset-button!
Same issue here-- though some chargers now work, some don't. My phone will charge with my OEM charger and usb to computer, but not my 3rd party wall charger or my car charger. Aaargh
Same Problem Here
Check out this thread at AT&T Forum regarding my attempt to get a replacement phone.
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=65536
I got mine replaced at the store. I was under 30 days and was lucky.
I am going to order one of these:
http://www.eforcity.com/silicone-mini-5-pin-plug-for-motorola-v3-2-pc-smoke-cmotv3xxpc01.html
it should fit. i also heard that certain verizon phones have rubber usb plugs on them. I may just stop in a verizon store and see if one fits. My tmobile wing had one on it and it worked great to protect the usb port.
Well...I did the samething last night. Tried to soft reset my phone while driving in the dark. Luckily I've had my tilt less than 30 days, called and now all I have to do is go to the AT&T store for a replacement....Also, I'm going to pay 10% restocking fee so I can get an extra battery and charger...W00T!!!!! I actually saved about 50 bux
One way to avoid doing this in the dark is to flip the phone upside down, locate ExtUSB socket with your left index finger, keep your finger over the socket and slide your stylus down your finger tip. Of course the easiest way is to turn a light on.
wizzzard said:
One way to avoid doing this in the dark is to flip the phone upside down, locate ExtUSB socket with your left index finger, keep your finger over the socket and slide your stylus down your finger tip. Of course the easiest way is to turn a light on.
Click to expand...
Click to collapse
true, but for those of us with this problem already, it is too late
Luckily, I tried a newer charger, and my car charger, and they both work. As far as connecting to my computer, I have to use my Y cable that was included with my old 8525. I'm still pissed, and I have a TyTn II and not a tilt, so warranty will be a pain in the ass, considering I have to send it to the UK. If it starts to act up, I will have to send it in, and if I get it fixed, I will definitely buy one of those plugs from the above post. Thanks for all the replies, and good luck to everyone with this problem.
Lesson # one don't put things in holes in the dark in bed
Well, good news is ATT is sending me out a replacement phone for free since I am still under warranty (outside the 30 days, but inside the 1-year). Now I just need to re-flash back to OEM status so I don't get busted on the return...time to test out the "Idiot's Guide to Re-Flashing Back to Original ROM" and see if it does me right.
Heijdemann said:
Lesson # one don't put things in holes in the dark in bed
Click to expand...
Click to collapse
that's why I have so many kids!?! anyways I had my phone charging in my car and it fell of my seat onto the floor. the nezt day I noticed it wasn't charging (tytn 2 no easy warranty fix) I then noticed that inside the usb thing is a black plastic piece with the small metal connections. the black piece was bent a little on one side so I removed the battery took a pair of tweazers and bent it it straight again than I took some forced air in a can (for a computer keyboard) and blew in there to make sure none of that cheap plastic shredded and got in the way of the metal connections. it looked like after I used the tweazers some of that black plastic chipped off (very small pieces) anyways after that it worked perfectly. hopefully this will help others
well it seems i messed up now and stuck my stencil in there one of the small Metal wires is out of whack now ad some chargers work and some dont did anyone get a plug yet?
pissed
so I live in metro detroit with a tytn 2 not a tilt. after I stuck my stencil in there it seems my car charger don't work. when charging with my audio adapter its flaky losing some power, maintaining, gaining some power. but when I use my wall charger with no adapter it charges!! if you put the kaiser flat on the table I see by 2nd wire (in the hole) is bent down(whereas the others are up) and its sitting in the middle of the whole.(my buddy told me to use a needle and a magnify glass because the 2nd wire was actually bent all the way down but I got it in the middle after messing with it. when that one wire was out of whack my car charger gave me a red constant light (no charge) after the stencil incident. I hope all that helps somebody! anyways so I call HTC first they tell me that's not covered under warranty. Then they tell me I have to send it to houston tx for 3 weeks. Then they tell me it will cost $300 usd to repair!!!! this is insane for a little miniusb piece that got hit once with a stencil. it probaly cost 22cents. what is everyone else doing? I think if I can get that metal piece to stick to the top it'll be fine. I just switched to att and I have 6 days until im locked to a 1yr contract I could buy a tilt for 250 or whatever but id have to sign a 2yr contract.
I stuck the stylus in the USB port as well but luckily I didnt seem to do any damage. I did bend it a bit but with some gentle pressure in the opposite direction it went back into place. I havent had any problems charging or syncing since then, so it seems I got lucky. Just gotta hope I dont do it again, lol.
ya the black piece as a whole seems to be able to bend a little but if u mess the little little metal connections in there you're gonna have problems
Hi, this is my first post and I hope to help someone. I had the same problem with my phone, it charged with the home charger and in the cradle but the car charger won't work. using a close light and a magnifier I could notice that with the phone with the screen upside looking at the usb connector that the pin al the way to the right was flat and a tip was showing as opposite to the others. I returned it to the former position and voila!! it works. I hope to help someone.
Related
So i took off my siedo case just to clean the dirt and other stuff between the case and my kaiser (which i do about once a week) and i noticed that my mini USB port on my device is CRACKED!!
I didn't buy the warranty the ebay seller offered me from SquareTrade, its an ATT Tilt, so do u think ATT would honor the warranty?
This is the best pic i could get using my brother N82...
Any chance that happened while trying to blindly reach the reset hole with the stylus?
Very common mistake!
Just try to bend it upward (carefully) with a plastic or wood toothpick or something like that and it should be ready to go. Don't use a metallic object.
Good luck!
Rayan
fone_fanatic said:
So i took off my siedo case just to clean the dirt and other stuff between the case and my kaiser (which i do about once a week) and i noticed that my mini USB port on my device is CRACKED!!
I didn't buy the warranty the ebay seller offered me from SquareTrade, its an ATT Tilt, so do u think ATT would honor the warranty?
This is the best pic i could get using my brother N82...
Click to expand...
Click to collapse
at&t specifically states that warranty is extended only to the original purchaser. Was the phone ever used prior to your receipt? If not them you can probably get by if you play dumb about the original pruchase date as all Tilts are still within the 12 month purchase whindow.
i bought it on ebay for $400 with $30 dollar shipping and it was stated "LNIB" like new in box. But what was funny was when i recieved it the imei on the device doesn't match the one on the box so either could be some funny business or a refurb device with a new box.
anyways after i posted this i was sitting in the library and i used a mechanical pencil with the led sticking out to push it back to place. It's syncing with activesync sporadically, will work then won't work, don't know if its do to this crack or my activesync could be busted (running windows through fusion on a mac)
Its charging fine right now and you can barely tell its cracked, other than one of the metal pins sticking out, i tried to push it back in with the led but the led kept breaking.
I think what caused it was the other day i was driving and had TomTom going and i plugged it into the car charger and put it in my center console. Theres a little edge on both sides of the center console and the charger was resting on it so i think thats what caused it.
If it does completely break off, I can definitely play the retarded stubborn customer and harass ATT till they fix it, I've got experience with these kinda things
Kyphur this happened to me yesterday also, but the whole piece came off... so the pins are hanging in the air... but im still able to synchronized and charge it.
do you think att will honor this one too?
i also cracked mine recently, when i pushed the stylus into the wrong hole =P
i managed to push the thing back into shape gently, and it would charge with the charger and sync with the supplied cable, but i found that it wouldn't sync with my retractable 3rd party cable, and also that if i tried copying files to/from the miniSD card with the supplied cable, the files and the card would become corrupted. this may have been because i used a screwdriver to push it back into shape...
anyway in the end i had to send it and for whatever reason, the service center kept on sending it back saying it "worked", even though when it came back neither my laptop nor the computers at the store i bought it from could even recognize the device. finally at the 3rd sending back they replaced the motherboard and now it works again.
>>>>>><<<<<< PDF With All Steps And Images Added For Your Viewing/Downloading Pleasure >>>>>><<<<<<
***If this does not belong here I appologize, and feel free to move this if necessary. I just figured the development community is most likely to take this "upgrade" on***
After seeing that someone used Palm's wireless charger on their non-palm phone; I decided to put one on my Droid Incredible.
***This was done to a completely stock Dinc. I did not use any special back, and the stock back gets to stay on (unlike in the other video that I saw)
Wireless Charging the Droid Incredible
**Disclaimer: This will void your warranty, and if you solder something wrong will probably break your phone. With that said I can in no way be held accountable for anything that occurs while performing this “upgrade” to your phone.
>>>>If anyone knows where I can buy that little void sticker that you will see in a picture below, please let me know! If we can get that sticker then our warranty is not voided by doing this.
Supplies:
1.Palm touchstone charger http://www.shopping.hp.com/product/handheld/categories/palm/4/accessories/FB300AA%23AC3
2.Palm touchstone phone back http://www.shopping.hp.com/store/product/product_detail/FB306AA%23AC3?
3.Micro USB cable
4.Soldering Iron (the finer the tip on this the better)
5.Torx T6 screw driver
6.Safe pry tool (or a small flat head screwdriver)
7.Very tiny insulated wires (I just pulled mine out of a USB cable that I cut up)
8.Electrical Tape
9.[Optional] Multimeter to test that you actually made a good connection
How To (Images are of a higher quality (12mp) so I had to stick them in zip files to get them on here):
1.The palm touchstone phone back has a sticker inside of it that encases the wireless charging receiver, so you need to peel this off. Once it is peeled off it will look like this (without the wires soldered onto it):
(Images can be seen in: Palm Receiver.7z)
2.Remove the battery cover and the battery then unscrew the back from your phone (please view a tare down video for details, there are plenty of them on you tube that I used for a reference.)
1.All you need is a torx t6 screwdriver and a safe pry tool, I used a small flat head screwdriver and it worked just fine. Unscrew the 4 screws around the sides and then carefully pry off every place that the battery cover clips on, as they also hold on the red back.
(Images can be seen in: Dinc Inside.7z)
3.Solder on some wires to the USB connector as shown in the below image without soldering onto the pins next to them. This is difficult and takes some time and patience, since these connectors are very small and close (note the polarity in the image, notated in red).
A.Also it is necessary to place a piece of electrical tape over the components right next to the connector (Green box in the image) as they will short out the power and make it impossible to charge your phone if you do not (I found that out the hard way and went back and fixed it).
B.One final note here is that I had to melt down the red phone backing inside to allow the cables to get past the case. See the green rectangle in the image above for where I had to do that. I just used my soldering iron and melted it down, it makes a pretty nice indention for the wires to fit through.
(Images can be seen in: Dinc USB.7z)
4.Now push out the rubber plug in the red phone backing next to the USB cover (this is encircled in Green in the image from step 2).
A.Run the cables that you just solder on through that so that they are sticking through to the battery compartment on your phone.
B.You can also stick on the palm receiver to the inside of your phone cover (note the direction and placement, as this is necessary to close your cover).
3.Note that I placed electrical tape over the wires. This was necessary to keep them from breaking off of the USB connector since the solder points are so small.
(Images can be seen in: Almost Done.7z)
5.Solder on the wires to the palm charger receiver and you are done. Now you just need to carefully place the wires towards the middle of the phone so that you can close the back of your phone entirely (this is another reason why the wires need to be small).
A.Note the polarity of the connection.
B.Also I put a piece of electrical tape over the connections on the palm charger receiver to protect them (not shown in the image).
(Images can be seen in: Wireless Charger.7z)
Here is a video of the end product and how it works:
http://www.youtube.com/watch?v=YOMVJ-vmWpg
Also I just verified that my compass is working without any problems.
This could be truly amazing. I can't wait to see more.
ThugEsquire said:
This could be truly amazing. I can't wait to see more.
Click to expand...
Click to collapse
Its been done with the Evo, but don't know anyone who did it with the Inc.
http://www.goodandevo.net/2010/06/h...rk-with-palm-touchstone-wireless-charger.html
Sounds really nice. Not gonna try it with mine because I'm too scared
Though shouldn't this be in accessories or general?
What are you doing to align the coils? My biggest concern that's kept me from this is the magnets also would mess up the compass sensors readings which I for one actually value.
Wow, you managed to bring me out of my months of silence in posting...
I feel honored that I can get you out of your months of silence
The coil alignment is handled by the magnets inside of the palm touchstone charger itself (the base unit that plugs into the wall). The metal objects that you can see in the "Palm Receiver.7z" file are actually not magnets, but small circular pieces of metal that get pulled towards the charger base when you get them close to each other. So when you have the phone off of the charger, there are no magnets to mess with anything
Also you will notice that there is a piece of metal behind the coil, and that seems to block the inductive signal all together (because I tried to put it on backwards to no avail). Therefore your phone is mostly protected from the inductive transmission.
The only thing that I noticed, is that the touchscreen on the phone is a little weird when it is on the charger, but I see the same side effects when plugging the phone into a "non-htc" charger (before performing this "upgrade"). **I also saw this on my Moto Droid when connecting it to a 1 amp charger, and I have seen this with multiple other touchscreen devices so I think it just has something to do with the frequency of the charger.
Also in case of any concerns: MY PHONE HAS IN NO WAY BEEN DAMAGED BY THIS "UPGRADE"
pianoplayer said:
Sounds really nice. Not gonna try it with mine because I'm too scared
Though shouldn't this be in accessories or general?
Click to expand...
Click to collapse
Yah, it probably should be, and may get moved (which is perfectly fine by me). I put it in here because I am a developer and much more likely to do this, so I figured the development community would be more interested.
ThugEsquire said:
This could be truly amazing. I can't wait to see more.
Click to expand...
Click to collapse
You mentioned that you can't wait to see more....?
What more would you like to see? I am happy to add to the posts, but just not sure what further details you would like to see.
nevetsvsx said:
Also in case of any concerns: MY PHONE HAS IN NO WAY BEEN DAMAGED BY THIS "UPGRADE"
Click to expand...
Click to collapse
I trust your method, I just don't trust my shaky hands
BTW there is a multi quote button so you dont have to do a separate post for each reply
I have a rubber case on my Dinc... would I need to remove it for charging?
___________________________________
Yup.... The ones yoe momma told ya about.... Bad Seed Customs!!
I think you will be ok if it is one of those thin (about 1mm thick) rubber cases. Anything thicker than that and you would probably have to install the wireless receiver on the case itself and remove your battery cover all together.
I tested a thin rubber case that I have (no more than 1mm thick I think) that fits a Droid Eris and it charges as long as its flush to the back of my phone.
Sent from my ADR6300 using XDA App
Wow, this is amazing, very well done. I think this is the first hard mod I've heard of for an Android. I guess gold cards were a sorta gray area.
I've had my Incredible modded to work with a Touchstone since around June of last year. It works great, but I must caution anyone thinking of doing this to be VERY careful. Experience with soldering and a steady hand is a must. One could fairly easily mess up their phone attempting to do this.
Could you do this with a powermat if you wanted to? I have a few laying around I could use.
Sent from my ADR6300 using XDA App
Paul600k5 said:
Could you do this with a powermat if you wanted to? I have a few laying around I could use.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Sure, if you wanna take apart one of those generic receivers and try to fit it inside your phone!
nevetsvsx said:
You mentioned that you can't wait to see more....?
What more would you like to see? I am happy to add to the posts, but just not sure what further details you would like to see.
Click to expand...
Click to collapse
What I originally meant was pictures. But now that you've added them and I've seen the glory, this mod is really quite impressive and I'm thrilled you shared it with us. But now that I think about it, could this also do USB wirelessly? That would be pretty amazing.
ThugEsquire said:
What I originally meant was pictures. But now that you've added them and I've seen the glory, this mod is really quite impressive and I'm thrilled you shared it with us. But now that I think about it, could this also do USB wirelessly? That would be pretty amazing.
Click to expand...
Click to collapse
No, the transmission of data wirelessly is achieved through modulated EM waves. This is simple inductance: a changing electric field creates a magnetic field, a changing magnetic field generates an electric field, so a current carrying loop placed near another loop of wire will induce current in the other loop. The receiver in the phone is engineered to "create" the "proper" amount current to charge your battery when combined with the base. In theory yes, but not with this equipment.
How does the phone treat a USB cable being plugged in - will it charge ok, and have your data transfer rates been adversely effected? I wouldn't think so, since you're only touching the power...
Mr. Spontaneous said:
How does the phone treat a USB cable being plugged in - will it charge ok, and have your data transfer rates been adversely effected? I wouldn't think so, since you're only touching the power...
Click to expand...
Click to collapse
I have used the USB charger and data transfer cables without any problems at all. Also I have copied some files off of my phone to my PC since the "upgrade" and did not notice any extended times or anything that would remotely make me think something was wrong.
I did not run a speed test before and after to see if anything slowed down, but as you said we are only touching the power pins, so I highly doubt anything has changed.
Heres the backround on what i did to get wireless charging going...
1) get palm coil and touchstone. i bought this on ebay for 10$ (just search touchstone charging kit)
2) carefully remove the coil from the back cover of the palm phone. plastic cover first then the rest.
3) what worked easiest for me was to keep all the coil stuff stuck to the removable plastic piece holding everything together, then you can simply stick it in the back of our active covers. (make sure when moving the magnets all the positive sides are facing towards the dock)
4) Connecting it. I tried doing this a couple different ways and i eventually ended up pulling tiny copper wire out of computer speaker cable and used it like a twist tie on the phone terminals (then small amount of electrical tape to separate them...which worked out fine)*I attempted to do the same on the coil side of the connection but that was a bust so i ended up soldering it.. not my first choice but since its on the palm coil not my active I did it.*
5) you should be all good to go at this point
here are some pics too and of course if you some of mess your phone up...its not my fault
Video- http://www.youtube.com/watch?v=BvO01b1CKBk
feel free to pm if ya got a question me... I am leaving the country tomorrow night for a week, but ill try to get back to ya
happy modding
in the picture with highlighting yellow goes to left phone terminal(positive) and brown goes to right teminal (negative)
bdgarel said:
Heres the backround on what i did to get wireless charging going...
1) get palm coil and touchstone. i bought this on ebay for 10$ (just search touchstone charging kit)
2) carefully remove the coil from the back cover of the palm phone. plastic cover first then the rest.
3) what worked easiest for me was to keep all the coil stuff stuck to the removable plastic piece holding everything together, then you can simply stick it in the back of our active covers. (make sure when moving the magnets all the positive sides are facing towards the dock)
4) Connecting it. I tried doing this a couple different ways and i eventually ended up pulling tiny copper wire out of computer speaker cable and used it like a twist tie on the phone terminals (then small amount of electrical tape to separate them...which worked out fine)*I attempted to do the same on the coil side of the connection but that was a bust so i ended up soldering it.. not my first choice but since its on the palm coil not my active I did it.*
5) you should be all good to go at this point
here are some pics too and of course if you some of mess your phone up...its not my fault
Video- http://www.youtube.com/watch?v=BvO01b1CKBk
feel free to pm if ya got a question me... I am leaving the country tomorrow night for a week, but ill try to get back to ya
happy modding
in the picture with highlighting yellow goes to left phone terminal and brown goes to right
Click to expand...
Click to collapse
This video seems very helpful with the process, just wish i knew which side was pos and which is neg http://www.youtube.com/watch?v=jHw1QIPwkZU
EDIT: i see the pics thank that helps!
joshuadjohnson22 said:
This video seems very helpful with the process, just wish i knew which side was pos and which is neg http://www.youtube.com/watch?v=jHw1QIPwkZU
EDIT: i see the pics thank that helps!
Click to expand...
Click to collapse
Use a multimeter...if you dont know how, you probably shouldn't attempt this hack and should wait for an aftermarket back plate to come out
Out of curiosity, how strong are these magnets? Am I going to have to make sure that my phone gets nowhere near my credit cards (and other magnetic cards, media, etc.)?
jt3 said:
Out of curiosity, how strong are these magnets? Am I going to have to make sure that my phone gets nowhere near my credit cards (and other magnetic cards, media, etc.)?
Click to expand...
Click to collapse
They are fairly strong but I have yet to have any issues with my cards...however I usually keep my phone in a separate pocket
Have you tested the phones waterproof capabilities since you did this mod? I love the idea, want to do it, but im on the fence, as it seems it would make it very easy to make the waterproofing gasket fail with a small wire.... on the other hand, you dont have to take the back off, or open the charging port, so if it doesn't void the waterproofing, it could be even better
Obviously, if any wire or any part of the wireless receiver protrudes over the seal, the water resistance will be compromised, but that's not the only issue.
In the back panel replacement sticker on the back of the S4A, it tells you to press under the camera LED. Pressing there engages the rubber seal. The issue is that any of these non-oem wireless receivers is going to slightly lift the central portion of the back away from the phone. Thus, even if no part of the seal-line is breached, I still wouldn't trust that the seal could engage fully.
Don't get me wrong... I'm going to do something similar, since I'd rather have wireless charging. Still... until an OEM wireless charging backplate comes from Samsung, I'd assume it's an either/or situation. Wireless charging OR water resistance.
jt3 said:
Obviously, if any wire or any part of the wireless receiver protrudes over the seal, the water resistance will be compromised, but that's not the only issue.
In the back panel replacement sticker on the back of the S4A, it tells you to press under the camera LED. Pressing there engages the rubber seal. The issue is that any of these non-oem wireless receivers is going to slightly lift the central portion of the back away from the phone. Thus, even if no part of the seal-line is breached, I still wouldn't trust that the seal could engage fully.
Don't get me wrong... I'm going to do something similar, since I'd rather have wireless charging. Still... until an OEM wireless charging backplate comes from Samsung, I'd assume it's an either/or situation. Wireless charging OR water resistance.
Click to expand...
Click to collapse
I will fix the wire issue by using copper tape. I'm excited to try it...
I am doing this mod tonight and I thought I would share some information.
See below for the information I have gathered:
Yellow lines = Copper tape- as you can tell it gets very cramped around the end because of the gasket. I may need to use a different path or wires like the OP. The important stuff to gather from this is which is positive and which is negative on both the phone and the palm pre touchstone.
Nice idea, curious to see how this works out.
Update
My copper tape has not arrived but I installed everything else. It does appear that the coil makes the rear housing push out which leads me to believe it will not do well to repel water away from the seal during extended use but I would prefer wireless charging
If you plan on using a case I would recommend ordering stronger magnets from supermagnets.com part number Disc - D1046. These should work well with any case and it will fit more snug because they are a lot stronger. I will update with photos once the copper tape is installed and everything is working.
Am I missing something? Why doesn't the Samsung wireless charging kit work or the wireless receiver tags you can get for the S4 so you can use a Qi charger?
Sent from my SGH-I337 using Tapatalk 2
holysnikey said:
Am I missing something? Why doesn't the Samsung wireless charging kit work or the wireless receiver tags you can get for the S4 so you can use a Qi charger?
Sent from my SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
The battery door is different. In theory it will work but you would have to figure out a way to gut the back plate and that would be a lot harder than palm's touchstone mod. Or just wait for the active's wireless back plate to be released. This is a lot cheaper IMO $10 vs $30-150
Ya I just realized this. But still do you think the wireless charger receiver tag could work? If you search on Amazon or Ebay "Galaxy S4 wireless charging receiver tag" there's the component which is stuck inside the back cover Samsung is selling. Except it can be bought for $10-20 and most likely can fit in the Active. I don't know because I have the original S4 but just trying to throw out some ideas. In theory if the tag works you can get it for $15 then use any Qi charger and you're good. While not quite as cheap it's only a few bucks more and much easier and looks way better probably. That is if it works of course.
Sent from my SGH-I337 using Tapatalk 2
holysnikey said:
Ya I just realized this. But still do you think the wireless charger receiver tag could work? If you search on Amazon or Ebay "Galaxy S4 wireless charging receiver tag" there's the component which is stuck inside the back cover Samsung is selling. Except it can be bought for $10-20 and most likely can fit in the Active. I don't know because I have the original S4 but just trying to throw out some ideas. In theory if the tag works you can get it for $15 then use any Qi charger and you're good. While not quite as cheap it's only a few bucks more and much easier and looks way better probably. That is if it works of course.
Sent from my SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
that would probably work... if i understand it correctly...
That's the image of what I'm talking about. The official back plate you buy from Samsung is just the battery door with that tag glued on the inside of the door.
holysnikey said:
That's the image of what I'm talking about. The official back plate you buy from Samsung is just the battery door with that tag glued on the inside of the door.
Click to expand...
Click to collapse
It probably will work but it will cost a lot more than this mod we are talking about. It will be a lot easier to install though
holysnikey said:
That's the image of what I'm talking about. The official back plate you buy from Samsung is just the battery door with that tag glued on the inside of the door.
Click to expand...
Click to collapse
I went ahead and order this 2, so we will see
joshuadjohnson22 said:
I went ahead and order this 2, so we will see
Click to expand...
Click to collapse
Same here. Amazon. 14.99
jdminpdx said:
Same here. Amazon. 14.99
Click to expand...
Click to collapse
I paid a little more because I wanted to get it this week. The cheaper ones come from China and may take a while. I now need a replacement back for my active, somehow with the palm mod one of my clips doesnt work any longer so under my volume rocker it is propped up. Excited to have wireless charging. Hopefully this week
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4 Beta
Hello, my galaxy note has been having some issues, a couple of days ago it would charge with the charger bent down but I decided to play around with the port with a toothpick to look for dust and bend the metal bit in the middle. Now it barely charges at all, I believe the charger bit is fairly cheap but I am not sure if it is very hard to do. I am wondering if I am best off buying a new phone or paying someone to fix it for me? Or just having a go at putting the new piece in myself? I have tried using another charger and the same charger charges other phones.
-Any Help Greatly Appreciated
jeffreymonk said:
Hello, my galaxy note has been having some issues, a couple of days ago it would charge with the charger bent down but I decided to play around with the port with a toothpick to look for dust and bend the metal bit in the middle. Now it barely charges at all, I believe the charger bit is fairly cheap but I am not sure if it is very hard to do. I am wondering if I am best off buying a new phone or paying someone to fix it for me? Or just having a go at putting the new piece in myself? I have tried using another charger and the same charger charges other phones.
-Any Help Greatly Appreciated
Click to expand...
Click to collapse
If you are ok using a screwdriver (jewelers type), you won't have any issues. There are countless youtube video's that show the removal procedure on that usb port. Granted, I've been doing electronics for over 40 years, but it's about a 10 minute procedure. One thing I do, with these super tiny screws, is I keep a small magnet handy that is attached to the bottom of a small metal bowl. When I take out a screw, it goes in the bowl, and with the magnetism, it won't get lost that way.
When you replace the USB port, get one that matches the one you remove. Depending on the country you live in, there could be a few different types. They all, will charge your phone, but, if you get the wrong match, the cellular signal you end up with, could be 1/2 of what it should be, so if you are in a low signal area with the one you have now, with the wrong usb board, you could end up with no signal.
p51d007 said:
If you are ok using a screwdriver (jewelers type), you won't have any issues. There are countless youtube video's that show the removal procedure on that usb port. Granted, I've been doing electronics for over 40 years, but it's about a 10 minute procedure. One thing I do, with these super tiny screws, is I keep a small magnet handy that is attached to the bottom of a small metal bowl. When I take out a screw, it goes in the bowl, and with the magnetism, it won't get lost that way.
When you replace the USB port, get one that matches the one you remove. Depending on the country you live in, there could be a few different types. They all, will charge your phone, but, if you get the wrong match, the cellular signal you end up with, could be 1/2 of what it should be, so if you are in a low signal area with the one you have now, with the wrong usb board, you could end up with no signal.
Click to expand...
Click to collapse
Thankyou I will have a go at removing it I am a bit unsure of which one to buy so I will have a look around once I take it out, They are fairly cheap aren't they?
jeffreymonk said:
Thankyou I will have a go at removing it I am a bit unsure of which one to buy so I will have a look around once I take it out, They are fairly cheap aren't they?
Click to expand...
Click to collapse
Yeah, less than $10(USD). Last one I got was like 8.95 or something.
Hello all, one of the little square charging contacts fell off of my gear live for some reason. I never really wore it much because I was always so worried I would scratch it up, but unfortunately one of the little square charging contacts fell off the back cover of my Gear Live. Is there somewhere I can buy a replacement rear cover? I see it has 4 screws and should be pretty easy to swap out, I just cant find one. If anyone can point me to where I can buy one, I would really appreciate it!
Thanks!
Similar situation here. The contacts on my Gear Live have eroded down to nothing - what were once gold plated contacts are now just chunky holes. It still charges, barely, and only in the right position - but the charging dock piece also snapped its latches off and I use a binder clip to hold it together. So that's two failures... first the clips, then the contacts. It's like Samsung intentionally designed this thing to last less than a year!
I finally found the solution and installed my new back cover today! The watch had ultimately died about a month ago (July 2016, about 9 months after they started severely eroding, above), when the positive/negative power pins finally deteriorated. I'd previously been charging it by occasionally cleaning gunk off the pins, then holding the "dock" in place with a loosened binder clip, every night.
After some deeper Google digging (by model number, SM-R382), I stumbled upon Rounded.com, which has all the parts available for purchase. It took 2-1/2 weeks to arrive from Germany.
Back cover (includes new battery, even though the battery is removable!): https://rounded.com/samsung-galaxy-gear-live-sm-r382-back-cover-black-gh97-15971a.html
Charging dock: https://rounded.com/samsung-galaxy-...g-dock-ee-dr382bb-gh98-33696a-ee-dr382bb.html
Total cost of about $43, and I have a like-new watch again.
FYI, you can just get the charging pins themselves for about $5:
http://www.ebay.ca/itm/262483640074
It takes about 5 mins to replace this. You'll need to have some glue to put in to seal the small PCB out from outside element (or carefully leave the old glue on there).
zivan56 said:
FYI, you can just get the charging pins themselves for about $5:
http://www.ebay.ca/itm/262483640074
It takes about 5 mins to replace this. You'll need to have some glue to put in to seal the small PCB out from outside element (or carefully leave the old glue on there).
Click to expand...
Click to collapse
http://www.fonejoy.com/samsung/wearables/gear-live-sm-r382.html