I know that since this wasn't a T Mobile specific ROM that I couldn't expect that option to be there, but I can't figure out to restore it or if it's even possible.
I have G3 running 2.26 IPL/SPL and BD 3.1 WM6. I want to restore the function that allowed me to setup my email accounts.
I have searched, but didn't find anything that would help me.
Nevermind.
Related
I've bought locked version of cingular SX66 some how managed to unlock the set, but I'm affraid of trying upgrade my SX66, will it be safe to upgrade after unlock? or it'll lock the set again... I've downloaded the file from siemens' site but never tried?
I have a Cingular SX66. I unlocked the phone prior to upgrading to Win 2k5. Once you upgrade, you would need to unlock your phone again with the win 2k5 unlock took found in the Wiki.
As for upgrading, I have upgraded following the Wiki to the Himalaya ROM without any problems. There are some settings you will need to change when flashing your files.
XGULA01 is the carrier code I think. You need to double check that in the forums as well. The ROM is very stable but may give you delays like when you press the Start key. Other then that, there has been no problems after upgrading.
I too have a Cingular (AT&T version). I have not unlocked my phone (not sure it ever was, but I currently don't care) and have tried both the Himalaya and Wizard versions.
I found the Wizard version to be more stable and with a few less installation headaches. You do need to create a EXTROM directory on a SD card before you upgrade, but the results are worth it.
Siemens SX66 locked??
Cingular sells these unlocked. I bought mine at a Cingular Corporate store not a reseller and it was not locked. The one my roomate bought at a different Corp store was also unlocked. We have both upgraded to the last ROM Siemens had before they removed this device from their site without issue....
I didn't want to try the Wizard version due to its lack of resolutions with MS voice command.
Can you list your updates and your programs that you got to work?
baeshin81 said:
I didn't want to try the Wizard version due to its lack of resolutions with MS voice command.
Can you list your updates and your programs that you got to work?
Click to expand...
Click to collapse
I ran with the Wizard ROM for a while, but went to the Himalaya and believe it is much better. I posted a couple of my reasons in the BA Wizard ROM thread. One of them was how smooth Voice Command ran with the Himalaya ROM. There seemed to be a delay with everything using the Wizard ROM. There's a new Wizard ROM out there that I hope Mamaich can release for us to test. Maybe it will be better.
Thank u so much guys.. I'm noob and want to ask a stupid question: The WM2003 upgrade that siemens offer on their web site is either Himalaya OR Wizard? and what r the main differences between these two? do u guys recommend to upgrade to WM2005? any link for??
Regards...
Has anyone else attempted to get Goodlink to work on another ROM aside from the stock TM ROM? I have tried both 2.16 and 2.17 and after reboot it just hangs at the password screen. If i reflash the stock ROM it installs and works fine. Any ideas?
Also. With 2.17 installed now, there is no "password" icon in the programs or settings group. I dont know if this is related.
Please help
Rom Upgrade and Goodlink Problems
Hi,
I am a bit of a newbie but could not get goodlink to work once I upgraded my rom. I am on a Qtek 9100. The rom it came with worked. The test rom out there worked and then the 2.18 rom didn't. I had a lot of trouble downgrading but eventually ended up back at the test rom. If you need a copy drop me an email.
good luck
Markus
thanks!
What ROM ver are u running now?"?
No luck here either. Decide to pull it off my Wizard (via hard reset), as I prefer the 2.17 ROM over stock. Figured its worth the trade-off since I'm using push mail at this point anyway.
hi
i am running the latest Summter rom with the following Device information showing
ROM Version - 2.24.10.1 wwe
ROM Date 4/17/06
Radio Version - 02.25.11
Ext Rom Version - 2.25.11.102
(i downloaded to 1.05 then CID unlocked (got the CID Unlocked at the finish) then upgraded without a hitch, i am reasonably sure i am completely upgraded, i have what "Could" be a stupid question but here goes. when i click the Com manager the "Push" e-mail icon is greyed out??? am i missing something? i will have my server up an running in about a week (Exchange with SP2, etc) so i am just curious am i missing a step? do i need to configure the activesync server info first? then the icon will be available? also along the same lines how can i verify that i am bluetooth stereo compatable??
any help is appreciated
thanks in advance
Can someone answer this "tricky" post?
I also have the same issue despite my Qtek 9100 (rom 2.25) is working like a charm!!...
Thanks in advance
well i was reading another post about www.mail2web.com and i signed up for their FREE exchange hosted e-mail service. i followed the directions and set up the server in activesync. once this was done the little envelope was highlighted and i was able to enable "Push"
e-mail. do a search for mail2web and sign up for the service. as far as the A2DP i assume when i get the headphones the option will show once they are paired.
good luck
biged
The last mistery on my phone has now been solved!
Waiting now new ROM's updates...
Cheers 8) :lol:
I recently purchased an 02 XDA IIS. Its unlocked so I can use my vodafone sim card. However, I cannot send or receive MMS, and obviously, I cannot access Vodafone Live. The friend who sold me the phone said I can just download the software for voda and reboot which would solve the prob. But after looking for the last 2 hours I cannot find anything. Any ideas?
i would be grateful if you could let me know...i need it too many thanks
email me if you find the solution
[email protected]
just try changing the settings for mms and gprs
http://www.mphone.co.uk/mms_wap_settings_vodafone.html
thanks for the help but it still wont connect to live or send/receive mms. im sure i do need the software from voda. But just dont know whereto find it.
im in a similiar situation as well.........
The device is set up in there sections, the radio rom, the ce rom and the ext rom. Carriier information or apps are found in the ext rom. The process is called cooking or backing.
If you would like you x branded phone to look and feel like a y branded phone then you need to exchange the content of the ext rom.
Some settings can be changed on the system , sms number, voice mail others are loaded through the ext rom (splash screens, e-mail setup programs for carrier y).
Best thing is wiki, read the info in the kitchen, understand the ext rom, cook it and most of all have fun.
Link in sig
Sorry... title should read XDA IIs
I recently bought an O2 Xda IIs (Win 2003) - 1.40.00 WWE and loved it so much that I decided to buy another from Ebay. This one was upgraded to WM5 5.03.02 WWE but it's not very stable and quite slow. Also the camera and bluetooth don't seem to work.
I'd like to downgrade to 2003, but don't have any success.
I've done the full hard reset and tried to re-flash the ROM but the RUU program doesn't show me the ROM version.
I seem to be going around in circles from post to post, and I can't seem to get past this stage. I can sync via ActiveSync and that seems fine - i.e. if I add Google to Mobile Favourites on my laptop, they come up on the Mobile Favourites on the Xda.
I've downloaded Chef_Tony 02 WM2003 UK and I'm using the noID updater. The instructions that I'm using are d-two's PDF file.
When I run the MaUpgradeUT_noID program, it doesn't show me the CE ROM version that I should be updating to. I've got the ms_.nbf, nk.nbf and radio_.nbf files in the same folder and I'm sure that it's what's needed.
When I click Upgrade, there's a pause about 15 seconds and then it says congratulations, and asks for a reset. In this time, nothing has changed on the Xda screen and I didn't get the progress bar.
I've done the mtty bit, and tried various combinations of reset, disabling the two processes in task manager and so on. Incidentally, d-two's instructions don't mention disabling the processes.
Can anyone shed any further light on this. I'd like to get this Xda running for my wife...
Thanks,
Ivan
Try the WM2003 SE that compiled by d-two, you can get the address in the file that I attach (sorry for this, but I haven't allowed to post links yet), it works fine for me. But if I can give an advice, why you don't try WM6.1 and WM6.5 that cooked by d-two too?? It was great!!!