it seems that when i dial a number using the dial pad that the name doesn't come up in the history its just the number....
it looks like it doesn't recognize the number with out the area code in it...
any help with this one?
i forgot to add that im using a tilt with Dutty's Touchflo on it
Related
On the nokia's when in a call u can use dtmf which will dial a number in ur phonebook whilst on the phone... i've tried this on the xda but dont know where or how to do it.... can any1 tell me how i go about getting this done?
Thx in adv.
http://dialdtmf.sourceforge.net/
"dialDTMF a Pocket PC (Pocket Contact) plugin to dial telephone numbers using DTMF's (aka Dual Tone Multi-Frequency)"
s
I've always found that you can just dial numbers while you're in a call, you just use the... dialpad. :/
I had one contact which dials one of those 0870 numbers for cheaper international calls, someone pointed out to me that to get the phone to pause inbetween dialing a number, you could setup a Contact with commas to achieve a pause (I think each comma pauses the dialing for about a second)... So I have 0870234821,,001598238 (for example, the numbers aren't real numbers, but you get the idea).
I've always found that I can just dial on the keypad if I'm in a call though, you just dial and it dials the DTMF. Am I missing a trick here? I've not installed any other dialing software, I'm just using the supplied software, just with the default skin.
i know wot u mean.... but i'm contstantly having to dial numbers whilst in call, so it would be useful to have a tool that will allow you to do this rather than dummying number and having a pause for different dtmf's
shaice said:
http://dialdtmf.sourceforge.net/
"dialDTMF a Pocket PC (Pocket Contact) plugin to dial telephone numbers using DTMF's (aka Dual Tone Multi-Frequency)"
s
Click to expand...
Click to collapse
i've tried this software but whilst incall, it doesnt trigger off... am i doing something wrong.
I see what you mean...
... Here's a thought; how about recording some combos of DTMF tones to predefined wave files, and triggering them on the phone whilst you're in a call? There's a chance the phone might pick them up as they're being played, and relay them down the line... Just a thought for this morning, one I've not tried in practice yet, but it might work.
it is good to use.
i use short tone and delay time change to 50ms.
nice !
thanks a lot
Can't get dialDTMF to work. The tones are played when I go to contacts -> dialDTMF, but only when NOT in a call. If I'm in a call and try to use dialDTMF nothing happens after I pick either work/home/mobile number.
Or am I using this tool the wrong way?
I bought the tilt about 1 month ago and fell in love with it. The only thing I dont like about it is the voice feature for dialing numbers. I'm looking for something similar to my razor that I had. It would do digit dial, name dial and you didn't even have to program the phone numbers in. It was awsome, you just had to annunciate. Didnt matter whose phone number you had. Any help PLEASE!!! Programs, apps, etc....
MS Voice Command
http://www.microsoft.com/windowsmobile/voicecommand/default.mspx
Not free but works for me..........
Need some help or advise on a missing feature on 6.1 standard smart dialer that existed on 6.0.
On 6.0 once you search for a contact using the smart dialer if you press down the on the d-pad it will not dial the contact but will open up the contact so you can email or txt pretty quickly. That was way faster than opening up contacts and searching for someone. If you wanted to call just had to press the SEND button.
But on 6.1 when you press the d-pad down it simply dials and the only way to txt is to touch and hold on the search result and even then it will only allow you to text but not email.
I was wondering whether there's a reg hack to get this feature enabled on the new 6.1 smart dialer.
just d-pad down to the contact and d-pad right until u see txt
Thanks for the quick reply but D-Pad left or right will only cycle through the numbers nothing else
hmm are u sure...i'm not doubting just tryin to help
but for me lets say i have a mobile and home number for a contact i just highlight it and on the right it shows m for mobile..i d-pad right to h for home and again to txt if i wanna text the contact
I know you are and thank you
I am quite confused now because I had the same feature (D-Pad right to text and hold down to open contact) on 6.0 are you also using 6.1 and the same dialer build?
i'm using winmo 6.1 i'm trying to find out what build i'm using
Same problem here. With WM6.0 you only have to press the d-pad to open the contact. Once you opened, i got the chance to send sms, send e-mail or make a call. With WM6.1 this ist missing! I think this is probably only a value i have to change in the registry, but where?
If you use the original WM6.1 dialer instead of the Touch dialer it will do exactly what you are looking for.
For some reason when I press the down on my d-pad with the Touch dialer it opens up the last call list, and does not scroll through the contacts list.
I see your in CA so video dial is not really a possibility anyways. If you have KaiserTweak or Shap's Advance Config, set your dialer skin to the WM6.1 dialer instead and see if this fixes your problem.
I flashed the original HTC WM6.1 Rom, and yes, the original WM6.1 Dialer works how i want. But this doesn't look really great, does it?
I am now using DxC dialer with smart dial patch and is working great. Only thing missing is the smart dial in landscape mode. This one is way faster but still miss the HTC dialer :-(
It is only a little vaue in the registry, can't nobody help?
Nobody out there who can solve this problem ?
Perhaps somebody can upload the smart dialer exe file from the oroginal WM6.0 Rom? I would be glad, thx !!
Can please, somebody with WM6.0, look up in his registry an tell me the value's for Smart Dialer ? So i can compare the two version with each other. THX
Push,
something new?
I got the official WM6.1 download from O2 and everything works fine,...except the dialler.
When I try and dial a shortcode it just picks the closest number and dials that number. E.g. if I try and dial 322 <send> it dials the full number of the first corresponding contact instead.
Aaaaaaaaagh!
Any ideas ?
Try turning off smart dialing options.
Thanks, but...
I like Smart Dial, it's just that the behaviour has chanegd in WM6.1 (Grr!)
I have 'solved' the issue by adding a contact (*<shortcode>) so that that appears first in list.
That'll have to do for now, but it's not a long term solution.
Cheers, DBo.
Hi, I have one more question that would help me decide on the HD7. I have about 1300 contacts in Outlook and multiple #'s for each contact. With some of the contacts, I have added a name behind one or more of the numbers in Outlook (say like on the Mobile # I have 222-222-2222 Tom). Well, currently in Android when I say call the mobile number of the main contact (and wanting to dial Tom), Android substitutes the numerical value for Tom (866) after the phone number, which in turns makes it an incorrect number. When I had Windows Mobile 6.5 Voice command dialing on my other WM phones, it would ignore the names behind the number and correctly dial it. Does anyone know if WM7 does the same thing? I hate to have to go back into Outlook and delete all those names behind the numbers, and if the HD7 handles it like WM6.5 did, it would help me decide to go with it. Thanks.
Seems to work for me -- I just added some letters to the end of an outlook contact, and called it, and it worked fine.
I should add that voice dialing has been flawless for me -- "Call david smith home two" calls the number under "Home 2" for David smith, and if there's only one David, you don't even need the smith!
Thanks
That's good news. Thanks for doing that.
And more, Windows Mobile never have that issue